Sequential Voltammetric Determination of Ultratrace Osmium,Ruthenium and Iridium. Application to Superficial Water

The present work, regarding the determination of ultratrace Os(VIII), Ru(III) and Ir(III) in superficial waters is an interesting example of the possibility to simultaneously, or better sequentially determine each single element in real samples by voltammetry. The method is based on the catalytic current of the Os(VIII)‐ and Ru(III)‐bromate systems by square wave voltammetry and on the Ir(III) determination by square wave catalytic adsorptive stripping voltammetry. 0.5 mol L^?1 acetate buffer pH 4.9+7.7×10^?2 mol L^?1 NaBrO₃ and 0.5 mol L^?1 acetate buffer pH 4.9+7.7×10^?2 mol L^?1 NaBrO₃+2.3×10^?5 mol L^?1 cetyltrimethylammonium bromide (CTAB) +0.2 mol L^?1 KCl were employed as the supporting electrolytes. The analytical procedure was verified by the analysis of the standard reference materials: Sea Water BCR‐CRM 403 and Fresh Water NIST‐SRM 1643d. For all the elements, the accuracy, expressed as relative error e (%), was satisfactory, being lower than 6 %, while precision as repeatability, expressed as relative standard deviation, s_r (%), was generally lower than 5 %. Once set up on the standard reference materials, the analytical procedure was transferred and applied to superficial water sampled in proximity to superhighway and in the Po river mouth area.     

Voltametric and Flow Injection Determination of Oxytetracycline Residues in Food Samples Using Carbon Fiber Microelectrodes

A voltammetric method for the determination of the antibiotic oxytetracycline (OTC) in food samples is reported. Carbon fiber microelectrodes (CFMEs), which allow voltammetric measurements to be performed in a small volume (1 mL) of the analyte extract from the samples, are employed. Repeatable electroanalytical responses were obtained with no need of applying cleaning treatments to the CFME. Under the optimized square‐wave conditions, a linear calibration plot for OTC was obtained in the 1.0×10^?6–1.0×10^?4 mol L^?1 range, with a detection limit of 2.9×10^?7 mol L^?1 (150 ng mL^?1) OTC. The determination of OTC by a flow‐injection method with amperometric detection using a homemade flow cell specially designed to work with CFMEs, was also evaluated using pure acetonitrile as the carrier. The SW voltammetric method was applied to the determination of OTC in spiked milk and eggs samples, at 100 ng mL^?1 and 200 ng g^?1 levels, respectively. The procedure involved the extraction of the analyte in ethyl acetate, evaporation of the solvent and reconstitution of the residue in acetonitrile ?5.0×10^?4 mol L^?1 tetrabutylammonium perchlorate medium. Recoveries of 96±8 and 91±8% were obtained for milk and eggs, respectively, by applying the standard additions method.     

A Simple Approach to Simultaneous Electroanalytical Quantification of Acetaminophen and Tramadol Using a Boron‐doped Diamond Electrode in the Existence of Sodium Dodecyl Sulfate

The present work describes the individual, selective and simultaneous quantification of acetaminophen (ACP) and tramadol hydrochloride (TRA) using a modification‐free boron‐doped diamond (BDD) electrode. Cyclic voltammetric measurements revealed that the profile of the binary mixtures of ACP and TRA were manifested by two irreversible oxidation peaks at about +1.04 V (for ACP) and +1.61 V (for TRA) in Britton‐Robinson (BR) buffer pH 3.0. TRA oxidation peak was significantly improved in the presence of anionic surfactant, sodium dodecyl sulfate (SDS), while ACP signal did not change. By employing square‐wave stripping mode in BR buffer pH 3.0 containing 8×10^?4 mol L^?1 SDS after 30 s accumulation under open‐circuit voltage, the BDD electrode could be used for quantification of ACP and TRA simultaneously in the ranges 1.0–70 μg mL^?1 (6.6×10^?6–4.6×10^?4 mol L^?1) and 1.0–70 μg mL^?1 (3.3×10^?6–2.3×10^?4 mol L^?1), with detection limits of 0.11 μg mL^?1 (7.3×10^?7 mol L^?1) and 0.13 μg mL^?1 (4.3×10^?7 mol L^?1), respectively. The practical applicability of the proposed approach was tested for the individual and simultaneous quantification of ACP and/or TRA in the pharmaceutical dosage forms.     

Ionic Organic Film Sensor for Determination of Phenolic Compounds

This paper describes the development of a new sensor based on an ionic organic film. The amphiphilic molecule, 4‐[(4‐decyloxyphenyl)‐ethynyl]‐1‐methylpyridinium iodide (10PyI), which has liquid‐crystalline properties, was synthesized and applied in the construction of a GCE/10PyI sensor. Analytical parameters for caffeic acid, repeatability (4.8 %), reproducibility (2.8 %), linearity (two ranges: 9.9×10^?7 to 3.8×10^?5 mol L^?1 and 4.7×10^?5 to 9.9×10^?5 mol L^?1) and detection limits (9.0×10^?7 mol L^?1 and 8.7×10^?6 mol L^?1), were determined. The method was successfully applied in the determination of total phenolic compounds (TPC) in mate herb extracts.     

Detection of Bisphenol A on a Screen-Printed Carbon Electrode in CTAB Micellar Medium

This work illustrates the effect of cetyltrimethylammonium bromide (CTAB) as an antifouling and pre-concentrating agent for electroanalytical measurement of bisphenol A (BPA) on a screen-printed carbon electrode. The calibration graphs are obtained for BPA from 1.0 × 10^?6 to 1.0 × 10^?5 mol L^?1 in B-R buffer pH 8.0 with addition of CTAB in a ratio of [CTAB]/[BPA] 2:1 and the limit of detection was 5.1 × 10^?8 mol L^?1. Nonylphenol can be also monitored by SWV at a potential 170 mV more positive than bisphenol A in B-R buffer pH 11.0 in the presence of CTAB. The method was successfully applied for BPA determination in river water and sewage without any pretreatment of the samples.     

Direct Simultaneous Determination of α‐ and β‐Naphthol Isomers at GC‐Electrode Modified with CNTs Network Joined by Pt Nanoparticles Through Derivative Voltammetry

The semi‐derivative technique was adopted to improve the resolution and surfactant was added to sample solution to enhance the sensitivity, α‐ and β‐naphthol isomers could be determined directly and simultaneously at glassy carbon electrode modified with carbon nanotubes network joined by Pt nanoparticles. In 0.1 mol L^?1 HAc‐NaAc buffer solution (pH 5.8), the linear calibration ranges were 1.0×10^?6 to 8.0×10^?4 mol L^?1 for both α‐ and β‐naphthols, with detection limits of 5.0×10^?7 for α‐ and 6.0×10^?7 mol L^?1 for β‐naphthol. The amount of naphthol isomers in artificial wastewater has been tested with above method, and the recovery was from 98% to 103%.     

Effects of alkyltrimethylammonium bromide surfactants on the kinetics of the oxidation of tris(1,10-phenanthroline)iron(II) by azido-pentacyanocobaltate(III) complex

The redox reaction between tris(1,10-phenanthroline)iron(II), [Fe(phen)₃]²⁺, and azido-pentacyanocobaltate(III), [Co(CN)₅N₃]^3? was investigated in three cationic surfactants: dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB) and cetyltrimethylammonium bromide (CTAB) in the presence of 0.1?M NaCl at 35°C. Second-order rate constant in the absence and presence of surfactant, k_w and k_ψ, respectively, were obtained in the concentration ranges DTAB?=?0???4.667?×?10^?4?mol?dm^?3, TTAB?=?0–9.364?×?10^?5?mol?dm^?3, CTAB?=?0???6.220?×?10^?5?mol?dm^?3. Electron transfer rate was inhibited by the surfactants with premicelllar activity. Inhibition factors, k_w/k_ψ followed the trend CTAB?>?TTAB?>?DTAB with respect to the surfactant concentrations used. The magnitudes of the binding constants obtained suggest significant electrostatic and hydrophobic interactions. Activation parameters ΔH^≠, ΔS^≠, and E_a have larger positive values in the presence of surfactants than in surfactant-free medium. The electron transfer is proposed to proceed via outer-sphere mechanism in the presence of the surfactants.     

A Study on Stripping Voltammetric Determination of Osmium(IV) at a Carbon Paste Electrode Modified In Situ with Cationic Surfactants

This article deals with the development of a method for the determination of osmium at a carbon paste electrode (CPE) modified with cationic surfactants of the quaternary ammonium salt type; namely, cetyltrimethylammonium bromide (CTAB) and 1‐(ethoxycarbonyl)‐pentadecyltrimethyl‐ammonium bromide (Septonex); both being added in situ and serving for preconcentration of osmium via its hexachloroosmate(IV) anion. The proper electrochemical detection was performed by cathodic scanning in the differential pulse voltammetric mode. Optimization studies concerning important experimental parameters also included a specially performed potentiometric titration, helping to define the actual stoichiometry for the ion‐pairing process, the main principle and driving force of the accumulation step. In a chloride/acetate buffer based supporting medium and with Septonex as the modifier of choice, the reduction signal for osmium was found to be proportional to the Os(IV) concentration in a range from 5×10^?9 to 5×10^?7 mol L^?1 with a limit of detection close to 5×10^?9 mol L^?1 (with preconcentration for 60 s). The method capable to determine Os(IV) in the presence of both Pt(IV) and Ir(III) was tested on model solutions as well as with real sample of industrial waste water (spiked with the analyte); both yielding the recovery rates within 88–99%.     

THE EFFECT OF BENZYL ALCOHOL ON THE MICELLAR PROPERTIES OF CTAB IN KBr SOLUTION

ABSTRACT

The effect of benzyl alcohol on the micellar size and shape of CTAB in KBr solution has been investigated by means of viscosity, LLS (laser light scattering), and NMR measurements. The surfactant CTAB (cetyltrimethylammonium bromide) and KBr content are kept constant at 0.01 mol.L^?1 and O.l^?1 mol.. The data from the various techniques are quantitatively in agreement. The viscosity of 0.01 mol.L^?1 CTAB/ 0.01mol.L^?1 KBr micellar system has a marked maximum at benzyl alcohol content 0.6%(v/v), where the size of rod micelles are largest. The results from 'H-NMR spectra of CTAB molecules show that before the maximum viscosity, benzyl alcohol is located in the interfacial region of CTAB micelles in the presence of KBr salt. If more benzyl alcohol is added, it starts solubilizing in the palisades of the micelles.     

Chemometric Strategies to Develop a Nanocomposite Electrode for Simultaneous Determination of Ascorbic Acid,Dopamine, and Uric Acid

A simple and sensitive method for simultaneously measuring dopamine (DA), ascorbic acid (AA), and uric acid (UA) using a poly(1‐aminoanthracene) and carbon nanotubes nanocomposite electrode is presented. The experimental parameters for composite film synthesis as well as the variables related to simultaneous determination of DA, AA, and UA were optimized at the same time using fractional factorial and Doehlert designs. The use of carbon nanotubes and poly(1‐aminoanthracene) in association with a cathodic pretreatment led to three well‐defined oxidation peaks at potentials around ?0.039, 0.180 and 0.351 V (vs. Ag/AgCl) for AA, DA, and UA, respectively. Using differential pulse voltammetry, calibration curves for AA, DA, and UA were obtained over the range of 0.16–3.12×10^?3 mol L^?1, 3.54–136×10^?6 mol L^?1, and 0.76–2.92×10^?3 mol L^?1, with detection limits of 3.95×10^?5 mol L^?1, 2.90×10^?7 mol L^?1, and 4.22×10^?5 mol L^?1, respectively. The proposed method was successfully applied to determine DA, AA, and UA in biological samples with good results.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

Determination of Trace of Cobalt in Complex Matrices by Adsorptive Stripping Voltammetry at a Lead Film Electrode

An adsorptive stripping voltammetric procedure for the determination of cobalt in a complex matrices at an in situ plated lead film electrode was described. The procedure exploits the enhancement effect of a cobalt peak observed in the system Co(II)–nioxime–piperazine‐1,4‐bis(2‐ethanesulfonic acid)–cetyltrimethylammonium bromide. The calibration graph was linear from 5×10^?10 to 2×10^?8 mol L^?1 and from 1×10^?10 to 1×10^?9 mol L^?1 for the accumulation times 120 and 600 s, respectively. The detection limit (based on the 3 σ criterion) for Co(II) following accumulation time of 600 s was 1.1×10^?11 mol L^?1. The interference of high concentrations of foreign ions and surfactants was studied.     

Voltammetric Determination of 3‐Nitrofluoranthene and 3‐Aminofluoranthene at Boron Doped Diamond Thin‐Film Electrode

The voltammetric behavior of 3‐nitrofluoranthene and 3‐aminofluoranthene was investigated in mixed methanol‐water solutions by differential pulse voltammetry (DPV) at boron doped diamond thin‐film electrode (BDDE). Optimum conditions have been found for determination of 3‐nitrofluoranthene in the concentration range of 2×10^?8–1×10^?6 mol L^?1, and for determination 3‐aminofluorathnene in the concentration range of 2×10^?7–1×10^?5 mol L^?1, respectively. Limits of determination were 3×10^?8 mol L^?1 (3‐nitrofluoranthene) and 2×10^?7 mol L^?1 (3‐aminofluoranthene).     

Simultaneous Differential Pulse Voltammetric Determination of Ascorbic Acid and Caffeine in Pharmaceutical Formulations Using a Boron‐Doped Diamond Electrode

A cathodically pretreated boron‐doped diamond electrode was used for the simultaneous anodic determination of ascorbic acid (AA) and caffeine (CAF) by differential pulse voltammetry. Linear calibration curves (r=0.999) were obtained from 1.9×10^?5 to 2.1×10^?4 mol L^?1 for AA and from 9.7×10^?6 to 1.1×10^?4 mol L^?1 for CAF, with detection limits of 19 μmol L^?1 and 7.0 μmol L^?1, respectively. This method was successfully applied for the determination of AA and CAF in pharmaceutical formulations, with results equal to those obtained using a HPLC reference method.     

An Experimental Design for Simultaneous Determination of Carbendazim and Fenamiphos by Electrochemical Method

This study is aimed to develop an electroanalytical methodology using a boron‐doped diamond electrode (BDD) associated with experimental design in order to determine simultaneously and selectively carbendazin (CBZ) and fenamiphos (FNP) pesticides. In previous studies oxidation peaks were observed at 1.10 V (CBZ) and 1.20 V (FNP), respectively, with characteristics of irreversible processes controlled by diffusion of species (in pH 2.0 (CBZ) and pH 3.5 (FNP)) using a BR buffer 0.1 mol L^?1 as support electrolyte. The differences between the potentials for both pesticides, (about 100 mV) indicate the possibility of selective determination of FNP and CBZ. However, employing an equimolar mixture of analytes, the peaks overlap to form a single oxidation peak. Thus, we used a 3⁴ full factorial design with four parameters to be analyzed in three levels, in order to obtain the optimized parameters for the separation of the peaks. The best separation conditions were pH 5.0, square wave frequency of 300 s^?1, pulse amplitude of 10 mV and scan increment of 2 mV. These parameters were used to obtain the calibration curves of CBZ and FNP. For CBZ the analytical curve was obtained in the concentration range of 4.95×10^?6 to 6.90×10^?5 mol L^?1 with good sensitivity and linearity (0.175 A/mol L^?1 and 0.999, respectively). The limits of detection (LOD) and quantification (LOQ) were 1.6×10^?6 mol L^?1 and 5.5×10^?6 mol L^?1, respectively. For FNP the linear concentration interval was 4.95×10^?6 to 3.67×10^?5 mol L^?1, with a sensitivity of 0,207 A/mol L^?1 and linearity of 0.996. The LOD and LOQ were 4.1×10^?6 mol L^?1 and 13.7×10^?6 mol L^?1, respectively. Using these experimental conditions it was possible to separate the oxidation peaks of CBZ (E_p=1.08 V) and FNP (E_p=1.23 V). The electroanlytical method was applied in lemon juice samples. The recovery values were 110.0 % and 92.5 % for CBZ and FNP, respectively. The results showed that the developed method is suitable for application in foodstuff samples.     

Construction and Validation of New Electrochemical Carbon Nanotubes Sensors for Determination of Acebutolol Hydrochloride in Pharmaceuticals and Biological Fluids

A simple, rapid and a highly selective method for direct electrochemical determination of acebutolol hydrochloride (AC) was developed. The developed method was based on the construction of three types of sensors conventional polymer (I), carbon paste (II) and modified carbon nanotubes (MCNTs) carbon paste (III). The fabricated sensors depend mainly on the incorporation of acebutolol hydrochloride with phosphotungstic acid (PTA) forming ion exchange acebutolol‐phosphotungstate (AC‐PT). The performance characteristics of the proposed sensors were studied. The sensors exhibited Nernstian responses (55.6 ± 0.5, 57.14 ± 0.2 and 58.6 ± 0.4 mV mol L^?1) at 25 °C over drug concentration ranges (1.0 × 10^?6‐1.0 × 10^?2, 1.0 × 10^?7‐1.0 × 10^?2 and 5.0 × 10^?8‐1.0 × 10^?2 mol L^?1 with lower detection limits of (5.0 × 10^?7, 5.0 × 10^?8 and 2.5 × 10^?8 mol L^?1 for sensors (I), (II) and (III), respectively. The influence of common and possible interfering species, pharmaceutical additives and some related pharmacological action drugs was investigated using separate solution method and no interference was found. The stability indicating using forced degradation of acebutolol hydrochloride was studied. The standard addition method was used for determination of the investigated drug in its pharmaceutical dosage forms and biological fluids. The results were validated and statistically analysed and compared with those from previously reported methods.     

Electrochemical Determination of Sunscreens Agents in Cosmetic Using Square Wave Voltammetry

Sunscreen agents and in particular UV filters are compounds added in different cosmetic formulations, that has the function of preventing damage caused by sun exposition. Therefore, this paper proposes the development of a simple, fast and reliable electroanalytical method utilizing square wave voltammetry (SWV) to the determination of Benzophenone‐3 (BZ‐3), camphor 4‐methylbenzylidene (MBC) and 2‐ethylhexyl‐4‐methoxycinnamate (OMC) in cosmetic samples. The electrochemical system consisted of a cell with three electrodes: work – gold electrode modified, reference – Ag/AgCl_(sat) and auxiliary – platinum, using as supporting electrolyte 4.0 mL of Britton Robinson Buffer 0.04 mol L^?1 (pH=4.0), 1.0 mL of methanol and 5.50×10^?4 mol L^?1 of cetyltrimethylammonium bromide (CTAB). The method was validated using three commercial sunscreen samples and the results showed recovery values between 83 and 98 %. The average values found for the analysed samples were 3.49 % m/m (728 mg L^?1) to BZ‐3, 0.56 % m/m (113 mg L^?1) to MBC and 0.99 % m/m (208 mg L^?1) to OMC. The detection (DL) and quantification (QL) limits were 0.47 mg L^?1 and 1.56 mg L^?1 to BZ‐3, 0.77 mg L^?1 and 2.58 mg L^?1 to MBC and 0.78 mg L^?1 and 2.59 mg L^?1 to OMC, respectively. The sunscreen protector samples were also evaluated by high‐performance liquid chromatography (HPLC) demonstrating a good correlation between the results and compared the results with allowed concentration.     

Electroanalysis of Bisphenol A at a Multiwalled Carbon Nanotubes‐gold Nanoparticles Modified Glassy Carbon Electrode

A sensitive electrochemical method was developed for the determination of bisphenol A (BPA) at a glassy carbon electrode (GCE) modified with a multiwalled carbon nanotubes (MWCNTs)‐gold nanoparticles (GNPs) hybrid film, which was prepared based on the electrostatic interaction between positively charged cetyltrimethylammonium bromide (CTAB) and negatively charged MWCNTs and GNPs. The MWCNT‐GNPs/GCE exhibited an enhanced electroactivity for BPA oxidation versus unmodified GCE and MWCNTs/GCE. The experimental parameters, including the amounts of modified MWCNTs and GNPs, the pH of the supporting electrolyte, scan rate and accumulation time, were examined and optimized. Under the optimal conditions, the differential pulse voltammetric anodic peak current of BPA was linear with the BPA concentration from 2.0×10^?8 to 2×10^?5 mol L^?1, with a limit of detection of 7.5 nmol L^?1. The proposed procedure was applied to determine BPA leached from real plastic samples with satisfactory results.     

Anodic Stripping Voltammetric Determination of Aurothiomalate in Urine Using a Screen‐Printed Carbon Electrode

This work describes an electroanalytical method for determining gold(I) thiomalate, aurothiomalate, widely used for treatment of reumatoid arthiritis, using a screen‐printed carbon electrode (SPCE). Aurothiomalate (AuTM) was determined indirectly at the same electrode by accumulating it first at ?1.5 V vs. printed carbon. At this potential in the adsorbed state, the AuTM is reduced to Au(0), which is then oxidized at two steps at ?0.22 V and +0.54 V on SPCE. Using optimized conditions of 60 s deposition time, ?1.5 V (vs. printed carbon) accumulation potential, 100 mV s^?1 scan rate, linear calibration graphs can be obtained by monitoring the peak at +0.54 V for AuTM in HCl 0.1 mol L^?1 from 1.43×10^?6 to 1.55×10^?4 mol L^?1. A limit of detection obtained was 6.50×10^?7 mol L^?1, and the relative standard deviation from five measurements of 3.0×10^?5 mol L^?1 AuTM is 4.5%. The method was successfully applied for AuTM determination in human urine sample.     

Voltammetric sensing of triclosan in the presence of cetyltrimethylammonium bromide using a cathodically pretreated boron-doped diamond electrode

ABSTRACT

In the present study, a simple, cheap and sensitive electrochemical method based on a cathodically pretreated boron-doped diamond (CPT-BDD) electrode is described for the detection of triclosan with the cationic surfactant (cetyltrimethylammonium bromide, CTAB) media. The oxidation of triclosan was irreversible and exhibited an adsorption controlled process. The sensitivity of the adsorptive stripping voltammetric measurements was significantly improved with addition of CTAB. Using square-wave stripping mode, a linear response was obtained for triclosan determination in Britton-Robinson buffer solution at pH 9.0 containing 2.5 × 10^?4 M CTAB at around + 0.67 V (vs. Ag/AgCl) (after 30 s accumulation at open-circuit condition). The method could be used in the range of 0.01–1.0 μg mL^?1 (3.5 × 10^?8–3.5 × 10^?6 M), with a detection limit of 0.0023 μg mL^?1 (7.9 × 10^?9 M). The feasibility of the proposed method for the determination of triclosan in water samples was checked in spiked tap water.