Electrochemical Monitoring of Saos‐2 Cell Differentiation on Pyrolytic Carbon Electrodes

In this study we establish an electrochemical platform based on two dimensional (2D) pyrolytic carbon electrodes for in vitro analysis of osteoblast differentiation. Electrochemical impedance spectroscopy (EIS) was used to monitor cell adhesion and proliferation, while an electrochemical assay based on square wave voltammetry (SWV) was applied to measure the activity of the differentiation marker alkaline phosphatase (ALP). 2D pyrolytic carbon electrodes were fabricated and used to monitor Saos‐2 cell differentiation for a period of up to 21 days. With this method it was possible to detect a faster increase of ALP activity for cells cultured in medium supplemented with differentiation factors compared to cells cultured in growth medium. This was confirmed by the results obtained with Alizarin Red staining, showing that cells subjected to osteogenic medium went through the entire differentiation process, from proliferation to mineralization. Finally, for the first time, real‐time monitoring of ALP activity combined with continuous EIS monitoring of the same cell culture was achieved using the pyrolytic carbon electrodes.     

Self‐Assembled Redox System for Bioelectrocatalytic Assay of L‐Ascorbylphosphate and Alkaline Phosphatase Activity

Ferrocene‐terminated self‐assembled monolayer (Fc‐SAM) on gold was used as an electron‐transfer mediator in the electrochemical assay of L ‐ascorbic acid 2‐phosphate (AAP). The assay is based on the enzymatic action of alkaline phosphatase (ALP), which triggers the release of vitamin C (L ‐ascorbic acid, AA) from AAP. The latter is easily oxidized on the Fc‐SAM under the diffusion limiting conditions that favors quantitative measurement of the AA concentration on a rotating disk electrode. We demonstrate the utility of the electrochemically active Fc‐SAM to probe the mechanism and to determine the kinetic parameters of an enzymatic reaction. The electrochemical technique was compared to a conventional spectrophotometric method of ALP activity detection using p‐nitrophenylphosphate (p‐NPP) as a substrate. We demonstrate that our new technique is also suitable for the analytical determination of ALP activity. The detection limits for both AAP and ALP were found to be 13 μM and 2 pM, respectively.     

Electrochemical Glutathione Sensor Based on Electrochemically Deposited Poly‐m‐aminophenol

Preparation and characterization of electrodes suitable for determination of glutathione is reported in this study. For this poly‐m‐aminophenol (PmAP), poly‐o‐aminophenol, and poly‐p‐aminophenol were electrochemically deposited from aqueous solution on the surface of glassy carbon (GC) electrode by potential cycling in the range of +0.2–+1.0 V. The modified GC electrodes were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, contact angle measurement and ellipsometry. It was found that poly‐m‐aminophenol modified GC electrode (PmAP/GC‐electrode) is most suitable for electroanalytical determination of glutathione. An electroanalytical system for the determination of glutathione based on the PmAP/GC‐electrode was developed. The analytical system was characterized by low limit of detection, good stability, high sensitivity and wide linear detection range.     

Scanning Electrochemical Microscopy (SECM) Based Detection of Oligonucleotide Hybridization and Simultaneous Determination of the Surface Concentration of Immobilized Oligonucleotides on Gold

The direct mode of scanning electrochemical microscopy (SECM) was used for the local deposition of oligonucleotide (ODN) patterns on thin gold films and the generation‐collection (GC) mode was applied for the determining the amount of surface‐accessible oligonucleotides. The local deposition was achieved through the micrometer‐sized formation of a conducting polymer bearing 15^mer single‐stranded oligonucleotide strands. After the interaction of the oligonucleotide with its biotin‐labeled complimentary strand, streptavidin was bound. The molecular assembly was completed by linking biotin‐labeled β‐galactosidase from Escherichia coli to the streptavidin. The activity of the linked β‐galactosidase was mapped with SECM in the GC mode by monitoring the oxidation of p‐aminophenol (PAP) formed in the enzyme‐catalyzed hydrolysis of p‐aminophenyl‐β‐D ‐galactopyranoside. The feedback effect due to recycling of the reaction product at the gold surface was analyzed. It was shown experimentally that this effect becomes insignificant at ultramicroelectrode (UME)‐substrate distances larger than 3 UME radii. The flux of formed PAP allowed the determination the surface density of accessible oligonucleotide strands in the functionalized polymer. It was shown that that thicker pyrrole/ODN–Pyrrole polymer films do not lead to a significantly increased accessible ODN surface concentration.     

Antipassivating Electrochemical Process of Glassy Carbon Electrode (GCE) Dedicated to the Oxidation of Nitrophenol Compounds

We report for the first time a novel electrochemical treatment applied to a glassy carbon electrode (GCE) during p‐nitrophenol (PNP) oxidation and dedicated to the limitation of electrode passivation by nitrophenol compounds oxidation. We propose an electrochemical process of direct phenol oxidation by starting the electrolysis at a very low potential, ?1.2 V/SCE, in order to generate a soluble monomer, p‐aminophenol, on the electrode surface. Then, p‐aminophenol elaborated on the electrode surface in the place of oligomers, gives benzoquinone as a by‐product and no film formation was observed. Furthermore, the presence of a p‐NiTSPc (film of nickel tetrasulfonated phtalocyanine) coating permitted to increase two times the electrode sensitivity without passivation, too.     

Electrocatalytic Determination of 6‐Tioguanine at a p‐Aminophenol Modified Carbon Paste Electrode

A p‐aminophenol modified carbon paste electrode (p‐APMCPE) was constructed for determination of an anticancer drug 6‐thioguanine (6‐TG). The cyclic voltammogram showed that the electrocatalytic oxidation of 6‐TG at the surface of p‐APMCPE occurs at a potential about 840 mV less positive than at an unmodified electrode. Square‐wave voltammetry results presented that the electrocatalytic oxidation peak currents of 6‐TG in pH 9.0 had two linear dynamic ranges in the range of 0.2 to 8.0 and 8.0 to 350.0 μM 6‐TG with a detection limit of 0.08 μM. The kinetic parameters such as electron transfer coefficient (α) and rate constant were determined for the chemical reaction between 6‐TG and p‐aminophenol. Finally, this method was evaluated for the determination of 6‐TG in 6‐thioguanine tablets and urine samples.     

Chemical synthesis and electric properties of the conducting copolymer of aniline and o‐aminophenol

A copolymer, poly(aniline‐co‐o‐aminophenol), was prepared chemically by using ammonium peroxydisulfate as an oxidant. The monomer concentration ratio of o‐aminophenol to aniline strongly influences the copolymerization rate and properties of the copolymer. The optimum composition of a mixture for the chemical copolymerization consisted of 0.3 M aniline, 0.021 M o‐aminophenol, 0.42 M ammonium peroxydisulfate, and 2 M H₂SO₄. The result of cyclic voltammograms in a potential region of ?0.20 to 0.80 V (vs.SCE) indicates that the electrochemical activity of the copolymer prepared under the optimum condition is similar to that of polyaniline in more acid solutions. However, the copolymer still holds the good electrochemical activity until pH 11.0. Therefore, the pH dependence of the electrochemical property of the copolymer is improved, compared with poly(aniline‐co‐o‐aminophenol) prepared electrochemically, and is much better than that of polyaniline. The spectra of IR and ¹H NMR confirm that o‐aminophenol units are included in the copolymer chain, which play a key role in extending the usable pH region of the copolymer. The visible spectra of the copolymers show that a high concentration ratio of o‐aminophenol to aniline in a mixture inhibits the chain growth. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5573–5582, 2007     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

A Comparative Study of Electrochemical Reduction of 4‐Nitrophenyl Covalently Grafted on Gold and Carbon

4‐Nitrophenyl layers were grafted on gold and glassy carbon surfaces by electrochemical reductive adsorption of the corresponding diazonium salt. Electrochemical conversion efficiencies of 4‐nitrophenyl moieties to 4‐aminophenyl moieties on gold versus on glassy carbon in a protic medium were investigated using X‐ray photoelectron spectroscopy (XPS). In total contrast to all previous comparative studies showing greater electrochemical reactivity of aryl diazonium salt‐derived layers on gold than on glassy carbon, a much lower rate of conversion to 4‐aminophenyl was observed on gold than on glassy carbon by both cyclic voltammetry (CV) and chronoamperometry (CA) methods. The lower electron transfer rate during conversion observed on gold versus glassy carbon was proposed to be due to a mechanism related to the molecular structure rearrangement of 4‐nitrophenyl during the process on glassy carbon. However, whilst complete conversion of 4‐nitrophenyl to 4‐aminophenyl on gold by chronoamperometry was achieved, on glassy carbon complete reduction could not be achieved under the same conditions.     

Efficient Electrocarboxylation of p-Methylpropiophenone in the Presence of Carbon Dioxide

In the one compartment electrochemical cell 2‐hydroxy‐2‐p‐tolyl‐butyric acid methyl ester was electrosynthesized by electrochemical carboxylation of p‐methylpropiophenone in the presence of carbon dioxide. Under galvanostatic conditions, the electrocarboxylation was influenced by supporting electrolytes, cathode materials, the current density, passed charge and temperatures. Application scope of the eletrocarboxylation system was then examined, and an excellent yield of 97% was obtained when the electrolysis was carried out in DMF‐0.1 mol·L^?1 TEABr solution using cheap and environmentally benign nickel as the cathode under a controlled current density of 5.0 mA·cm^?2 until 2.8 F·mol^?1 charge passed through the cell at ?10°C. The electrochemical behavior of p‐methoxylacetophenone has been studied on the glassy carbon electrode by cyclic voltammetry and the probable mechanism was proposed accordingly.     

A Facile and Efficient One‐Pot Electrochemical Synthesis of Thiazole Derivatives in Aqueous Solution

In the present work, the electrooxidation of hydroquinones 1a and 1b , and catechols 1c and 1d was studied in the presence of rhodanine ( 3 ) as nucleophile in a mixture of EtOH and phosphate buffer solution as ‘green’ media using cyclic voltammetry and controlled‐potential coulometry. The results indicated that the corresponding p‐ and o‐quinones formed from the hydroquinones and catechols, respectively, participate in Michael addition reaction to yield new thiazole derivatives. The electrochemical syntheses of these new thiazole derivatives were performed successfully at three graphite rod electrodes in undivided cells in good‐to‐excellent yields at room temperature without any catalyst.     

Synthesis and Reactions of Some New Quinazoline Derivatives for In Vitro Evaluation as Anticancer and Antimicrobial Agents

A novel series of N,O,S heterocyclic compounds incorporated at position‐3 of a quinazolin‐4(3H)‐one moiety were synthesized through a p‐phenloxy binding including oxadiazolethione pyridazinetrione, thiazolidinedione, benzothiazindione, and quinazolinedione. New carbamates, urea derivatives, and Mannich bases were also prepared for the purpose of in vitro anticancer cell lines evaluation and cytotoxic activity. The key intermediate 2‐(4‐chlorophenyl)‐3‐(4‐hydroxyphenyl)quinazolin‐4(3H)‐one was prepared from the reaction of 4H‐benzo [d][3,1]oxazin‐4‐one and a nitrogenous nucleophilic compound, 4‐aminophenol. Some of the newly synthesized compounds showed significant cytotoxic activity.     

Photopatternable Carbon Electrodes for Chip‐Based Electrochemical Detection

Presented is the preparation and initial characterization of carbonaceous electrodes prepared using photolithographic techniques. The electrodes were created using a graphite doped photoresist mixture which allowed for direct electrode patterning. The electrodes were tested using cyclic voltammetry with a Fe(CN) test solution and were found to exhibit a linear response as per the Randles–Sevick relation. The feasibility of using these electrodes to conduct biological assays was demonstrated with p‐aminophenol, a common analyte in electrochemical ELISAs, using differential pulse voltammetry.     

Electrocatalytic Oxidation of Some Carbohydrates by Nickel/Poly(o‐Aminophenol) Modified Carbon Paste Electrode

This study investigates the electrocatalytic oxidation of glucose and some other carbohydrates on nickel/poly(o‐aminophenol) modified carbon paste electrode as an enzyme free electrode in alkaline solution. Poly(o‐aminophenol) was prepared by electropolymerization using a carbon paste electrode bulk modified with o‐aminophenol and continuous cyclic voltammetry in HClO₄ solution. Then Ni(II) ions were incorporated to electrode by immersion of the polymeric modified electrode having amine group in 1 M Ni(II) ion solution. Cyclic voltammetric and chronoamperometric experiments were used for the electrochemical study of this modified electrode; a good redox behavior of Ni(OH)₂/NiOOH couple at the surface of electrode can be observed, the capability of this modified electrode for catalytic oxidation of glucose and other carbohydrates was demonstrated. The amount of α and surface coverage (Γ*) of the redox species and catalytic chemical reaction rate constant (k) for each carbohydrate were calculated. Also, the electrocatalytic oxidation peak currents of all tested carbohydrates exhibit a good linear dependence on concentration and their quantification can be done easily.     

Comparison of Electrochemical and Surface Plasmon Resonance Immunosensor Responses on Single Thin Film

This paper reports results obtained when comparing an electrochemical enzyme immunosensor and a surface plasmon resonance (SPR) based immunosensor on the same gold surface installed in an electrochemical SPR flow cell. Simultaneous electrochemical and SPR measurements were performed on a gold surface modified with multilayers of poly‐L ‐lysine and poly‐styrenesulfonate assembled with the layer‐by‐layer method. First, we obtained the SPR response induced by the formation of an immunocomplex from the shift in the SPR angle by injecting an anti tumor necrosis factor‐α antibody solution labeled with alkaline phosphatase into the flow cell containing the multilayer modified with tumor necrosis factor‐α. Then we compared this SPR result with that obtained for the electrochemical oxidation current of p‐aminophenol catalyzed by alkaline phosphatase from p‐aminophenolphosphate on the same gold film. We compared the two immunosensor responses obtained using the different measurement principles and found that there was a high correlation efficient of 0.973 between them. This was because we were able to immobilize the immunoreagents with good stability and without losing the transport of the enzyme product in the multilayer whose thickness we easily controlled with nanometer scale accuracy. We also report that the detection limit of our electrochemical immunosensor after optimization was around 100 pg/mL (0.4 pM), which is one of the lowest values yet reported for an electrochemical immunosensor.     

A Graphene‐based Electrochemical Sensor for the Individual,Selective and Simultaneous Determination of Total Chlorogenic Acids,Vanillin and Caffeine in Food and Beverage Samples

An electrochemical sensor based on the electrocatalytic activity of graphene (GR) was prepared, and used for the individual, selective and simultaneous determination of 5‐O‐Caffeoylquinic acid (5‐CQA) that is major compound of chlorogenic acids in coffee, vanillin (VAN) and caffeine (CAF). The electrochemical behaviors of these compounds on GR modified glassy carbon electrode (GR/GCE) were investigated by cyclic voltammetry and square‐wave adsorptive stripping voltammetry. By using stripping conditions after 30 s accumulation under open‐circuit voltage, the electrochemical oxidation peaks appeared at +0.53, 0.83 and 1.39 V in phosphate buffer pH 2.5, and good linear current responses were obtained with detection limits of 4.4×10⁻⁹, 5.0×10⁻⁷, and 3.0×10⁻⁷ M for 5‐CQA, VAN and CAF, respectively. The potential applicability of the proposed method was illustrated in commercial food and beverage samples.     

Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spec-troscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers(SAMs).A carboxylic acid-terminated thiol,such as thioctic acid(1,2-dithiolane-3-pentanoic acid),was self-assembled on gold electrodes.Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)63-as a probe.The surface pka of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 ±0.1 and 5.8±0.1,respectively.The method is compared with other methods of monolayer pKa measurement.     

Electrochemical derivatization of carbon surface by reduction of diazonium salts in situ generated from nitro precursors in aqueous solutions and electrocatalytic ability of the modified electrode toward hydrogen peroxide

The carbon electrode was covalently modified by electrochemical reduction of nitro precursor in the presence of NaNO₂ in aqueous solutions. The nitro precursor used is p-nitrophenyl phosphate, a well-known chromogenic substrate for the determination of acid and alkaline phosphatases. It is the first method for the covalent modification of carbon surface with a phosphate group. The modified electrode was characterized via cyclic voltammetry, electrochemical impedance spectroscopy, and X-ray photoelectron spectroscopy. It displays good electrocatalytic activity toward hydrogen peroxide reduction.     

Carbon nanotube/metal oxide dispersed poly(ortho‐aminophenol) as a ternary nanocomposite film: Facile electrosynthesis,surface characterization,and electrochemical pseudocapacitive performance

In this work, CNT‐NiCo₂O₄ was first synthesized via a chemical strategy in order to fabricate the ternary nanocomposite of a p‐type conductive polymer. Subsequently, hybrid poly(o‐aminophenol) POAP/CNT‐NiCo₂O₄ ternary composite films were prepared via the electropolymerization of POAP in the presence of CNT‐NiCo₂O₄ to be used in electrochemical storage devices as the active electrode. Electrochemical analyses including galvanostatic charge–discharge experiments, cyclic voltammetry, and electrochemical impedance spectroscopy were conducted to study the system performance. Furthermore, surface analyses were carried out to characterize the POAP/CNT‐NiCo₂O₄ composite film. Novel nanocomposite materials with the merits of extraordinarily high active surface area, ease of fabrication, and superior stability in aqueous electrolytes are presented for use in electrochemical redox capacitors.     

Enzyme-based electrochemical biosensor for sensitive detection of DNA demethylation and the activity of DNA demethylase

A novel electrochemical method is developed for detection of DNA demethylation and assay of DNA demethylase activity. This method is constructed by hybridizing the probe with biotin tagged hemi-methylated complementary DNA and further capturing streptavidin tagged alkaline phosphatase (SA-ALP) to catalyze the hydrolysis reaction of p-nitrophenyl phosphate. The hydrolysate of p-nitrophenol (PNP) is then used as electrochemical probe for detecting DNA demethylation and assaying the activity of DNA demethylase. Demethylation of target DNA initiates a degradation reaction of the double-stranded DNA (dsDNA) by restriction endonuclease of BstUI. It makes the failed immobilization of ALP, resulting in a decreased electrochemical oxidation signal of PNP. Through the change of this electrochemical signal, the DNA demethylation is identified and the activity of DNA demethylase is analyzed with low detection limit of 1.3 ng mL⁻¹. This method shows the advantages of simple operation, cheap and miniaturized instrument, high selectivity. Thus, it provides a useful platform for detecting DNA demethylation, analyzing demethylase activity and screening inhibited drug.