Challenges in Modelling and Optimization of Stability Constants in the Study of Metal Complexes with Monoprotonated Ligands. Part II

The influence of 2‐hydroxy‐3‐[(2‐hydroxy‐1,1‐dimethylethyl)amino]propane‐1‐sulfonic acid (AMPSO=HL) on systems containing copper(II) was studied by glass‐electrode potentiometry (GEP) and direct‐current polarography (DCP), at fixed total‐ligand‐to‐total‐metal‐concentration ratios and various pH values (25°, 0.1M KNO₃ medium). The predicted model ([CuL]⁺, [CuL(OH)], [CuL₂], [CuL₂(OH)]^?, [CuL₂(OH)₂]^2?, and [CuL₃]^?) and the overall stability constants for species found were obtained by combining results from both electrochemical techniques. The last five complexes are reported for the first time. For the species [CuL]⁺, [CuL₂], [CuL₃]^?, and [CuL₂(OH)₂]^2?, it was possible to determine stability constants with reasonable certainty and their values, as log β, were found to be 4.62±0.04, 9.5±0.1, 13.4±0.1, and 21.2±0.1, respectively. For the species [CuL(OH)] and [CuL₂(OH)]^?, stability constants 11.7±0.2 and 15.6±0.2, respectively, are presented as indicative values. It was demonstrated that AMPSO buffer may decrease the Cu²⁺ concentration by ten orders of magnitude by forming complexes with Cu²⁺. For the first time, the correction in DCP waves for the adsorption of the ligand and quasi‐reversibility of the metal allowed to determine stability‐constant values that are in good agreement with the values obtained by GEP. The importance of graphic analysis of data and significance of employing two analytical techniques was demonstrated; neither GEP nor DCP would be able to provide the correct M/L/OH^? model and reliable stability constants when used independently.     

Stabilities and Redox Properties of Cu(I) and Cu(II) Complexes with Macrocyclic Ligands Containing the N2S2 donor Set

The complexation of Cu(I) and Cu(II) by a series of 12-, 14- and 16-membered macrocyclic ligands 1–6 containing the N₂S₂ donor set has been studied potentiometrically, spectrophotometrically and voltammetrically. In the case of Cu(II), mononuclear complexes CuL²⁺ with stability constants of 10¹⁰–10¹⁵ are formed. In addition, partially hydrolyzed species Cu(L)OH⁺ are observed at pH > 10 for the 12-membered ligands. For Cu(I), beside the specis CuL⁺ with stabilities of 10¹²–10¹⁴, the unexpected formation of protonated species CuLH²⁺ was detected. In contrast to the well-known general trends in coordination chemistry, the stability of these protonated species increases relative to that of the complexes with the neutral ligand when the ring size and concomitantly the distance between neighbouring donor atoms is decreased. From the stability constants of the Cu(I)- and Cu(II)-complexes the redox potentials have been calculated and are compared to the values of E^1/2 obtained by cyclic voltammetry. Despite the identical donor set the Cu(II)/Cu(I) redox potentials of the complexes are spanning a range of 340 mV or six orders of magnitude in relative stability, reflecting the importance of subtle differences in steric requirements.     

Composition and stability constants of copper(II) complexes with succinic acid determined by capillary electrophoresis

The advantage of capillary electrophoresis was demonstrated for studying a complicated system owing to the dependence of direction and velocity of the electrophoretic movement on the charge of complex species. The stability constants of copper(II) complexes with ions of succinic acid were determined by capillary electrophoresis, including the 1?:?2 metal to ligand complexes which are rarely mentioned. The measurements were carried out at 25 °C and ionic strength of 0.1, obtained by mixing the solutions of succinic acid and lithium hydroxide up to pH 4.2–6.2. It was shown that while pH was more than 4.5 the zone of copper(II) complexes with succinate moves as an anion. It is impossible to treat this fact using only the complexes with a metal-ligand ratio of 1?:?1 (CuL⁰, CuHL⁺). The following values of stability constants were obtained: log β(CuL) = 2.89 ± 0.02, log β(CuHL⁺) = 5.4 ± 0.5, log β(CuL₂^2?) = 3.88 ± 0.05, log β(CuHL₂^?) = 7.2 ± 0.3.     

Interaction of pyridine‐ and 4‐hydroxypyridine‐2,6‐dicarboxylic acids with heavy metal ions in aqueous solutions

Interactions between pyridine‐2,6‐dicarboxylic acid and 4‐hydroxypyridine‐2,6‐dicarboxylic acid with Cu(II), Pb(II), and Cd(II) ions were characterized in aqueous solutions (20°C; I = 0.4 (KNO₃)) by means of dc‐polarography. In solutions with excess of ligand, Cu(II), Pb(II), and Cd(II) form 1:2 complexes with the tridentate dianion of pyridine‐2,6‐dicarboxylic acid (dipic²⁻) from weak acid to alkaline solutions. The values of log β₂ for Cu(II), Pb(II), and Cd(II) are 16.1, 11.8, and 11.0, respectively. The complexing ability of pyridine‐2,6‐dicarboxylic acid is higher in acid solutions and lower in alkaline solutions than that of 4‐hydroxypyridine‐2,6‐dicarboxylic acid. This difference is attributed to the OH‐group, which can deprotonate in basic pH. In acid solutions the OH‐group acts as an electron acceptor and reduces the electron donation available to the nitrogen atom in 4‐hydroxypyridine‐2,6‐dicarboxylic acid, whereas in alkaline solutions the OH‐group is deprotonated, and the deprotonated O₋ group acts as an electron donor and increases the coordination ability of the ligand. The triple‐deprotonated anion of 4‐hydroxypyridine‐2,6‐dicarboxylic acid (chel^3‐) forms a stable diligand complex with Cu(II), the stability constant logarithm being 21.5 ± 0.2.© 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:625–632, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10203     

Removal of Cu(II) from CuSO4 Aqueous Solution by Mg‐Al Hydrotalcite‐like Compounds

Hydrotalcite‐like compound (HTlc) with a Mg/Al molar ratio of 2:1 was synthesized by using a coprecipitation method and the sorption removal of Cu(II) by the Mg‐Al HTlc sample from CuSO₄ solution was investigated. It was found that the Mg‐Al HTlc showed a good sorption ability for Cu(II) from CuSO₄ solution, indicating that the use of hydrotalcite‐like compounds as promising inorganic sorbents for the removal of heavy metal ions from water is possible. The sorption kinetics and the sorption isotherm of Cu(II) on the HTlc obeyed the pseudo‐second order kinetic model and Langmuir equation, respectively. The percent removal of Cu(II) by the HTlc was strongly dependent on the initial pH of bulk solution. It increased sharply with the increase of initial pH value in the range of 5–7, and was relatively small in the initial pH range of 4–5, while it reached about 100% after initial pH was higher than 7. The presence of AlCl₃ might obviously lower the equilibrium sorption amount (q_e) of Cu(II) on the HTlc. However, the presences of NaCl and MgCl₂ might increase the q_e. The presences of ligands (citric acid and EDTA) in the studied concentration range might obviously decrease the q_e of Cu(II) on the HTlc. The removal mechanism of Cu(II) cations by HTlc in the presence of SO₄^2? anions may be attributed to the surface‐induced precipitation of Cu(II) hydroxides and the surface complex adsorption by the linking effect of SO₄^2? between the HTlc and Cu(II) cations, and the removal ability arising from the surface‐induced precipitation is much higher than that from the linking effect of SO₄^2?.     

Simultaneous Electrochemical Detection of Co(II) and Cu(II) by 1‐Diazo‐2‐Naphthol‐4‐Sulfonic Acid/MWCNTs Modified Electrode

This work describes a simple preparation of 1‐diazo‐2‐naphthol‐4‐sulfonic acid (1,2,4‐acid) and multiwalled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) for the simultaneous detection of Co(II) and Cu(II). MWCNTs, with their good conductivity and large surface area, were drop‐casted onto the surface of the GCE prior to the electrodeposition of 1,2,4‐acid, a metal chelating agent. Co(II) and Cu(II) were simultaneously measured by differential pulse anodic stripping voltammetry (DPASV) in a batch system. Under optimum conditions, the linear range of Co(II) was between 0.10 and 2.5 μg mL⁻¹ with an LOD of 80 ng mL⁻¹. Two linear ranges were obtained for Cu(II), 0.0050 to 0.030 μg mL⁻¹ and 0.040 to 0.25 μg mL⁻¹,with an LOD of 2.4 ng mL⁻¹. The method offered a high operational stability for up to 52 measurements (RSD=3.4 % for Co(II) and 2.6 % for Cu(II)) and good reproducibility (RSD=1.2 % for Co(II) and 1.7 % for Cu(II)). In the simultaneous detection of Co(II) and Cu(II), there was no effect from common interferences found in wastewater. The method was successfully applied in real water samples with good recoveries (88.2±0.8 to 102.0±0.8 % for Co(II) and 96.5±0.4 to 103.8±0.9 % for Cu(II)) and the results were in good agreement with those obtained from inductively coupled plasma optical emission spectrometry (ICP‐OES) (P >0.05).     

Influence of Cu(II) Ions on the Mechanism of the Ring Transformation of S‐(2‐Oxotetrahydrofuran‐3‐yl)‐N‐(4‐methoxyphenyl)isothiouronium Bromide

The effect of additional Cu(II) ions on the rate of transformation of S‐(2‐oxotetrahydrofuran‐3‐yl)‐N‐(4‐methoxyphenyl)isothiouronium bromide ( 1 ) into 5‐(2‐hydroxyethyl)‐2‐[(4‐methoxyphenyl)imino]‐1,3‐thiazolidin‐4‐one ( 2 ) has been studied in aqueous buffer solutions. The reaction acceleration in acetate buffers is caused by the formation of a relatively weakly bonded complex (K_c = 600 L·mol^?1) of substrate with copper(II) acetate in which the Cu(II) ion acts as a Lewis acid coordinating the carbonyl oxygen and facilitating the intramolecular attack, leading to the formation of intermediate T^±. The formation of the complex of copper(II) acetate with free isothiourea in the fast preequilibrium (K_c) is followed by the rate‐limiting transformation (k_Cu) of this complex. At the high concentrations of the acetate anions, the reaction is retarded by the competitive reaction of these ions with copper(II) acetate to give an unreactive complex [Cu(OAc)₄]^2?_. The influence of Cu(II) ions on the stability of reaction intermediates and the leaving group ability of the alkoxide‐leaving group compared to the Cu(II)‐uncatalyzed reaction is also discussed.     

The effect of 2,2′-bipyridyl on the stability of Cu(II) complexes with carboxylic acids

The stability constants β₂, and β₂ of simple Cu(II) complexes with methoxyacetic, phenylacetic, and cyclohexylacetic acid were determined spectrophotometrically and compared with the stability of composite complexes containing 2,2′-bipyridyl as the first ligand and the above mentioned acid as the second ligand. In each case the stability of the composite complex Cu(bip)L⁺ was found to exceed that of the simple complex CuL⁺ and the differences in the values of log β are comprised within 0.15–0.17.     

Binding of Copper(II) to Pectins by Electrochemical Methods

The interaction between Cu(II) and pectin extracted from citrus fruit was studied in KNO₃ 0.10 mol dm^?3 at 25 °C and pH 5.5, using ion selective electrode potentiometry and voltammetry, namely differential pulse polarography and square‐wave voltammetry. Although many independent variables may affect Cu(II)‐polymer interactions such as charge density, polymer concentration and copper to polymer concentration ratio, a good fitting was observed for the model with ML and ML₂ complex species, when M:L total concentration (mol dm^?3) ratio varies from 0.2 to 2.7 and the ligand concentration is in the range (0.2 to 1) g dm^?3, i.e., (0.4 to 2)×10^?3 mol COO^? dm^?3. The complex parameters found in these conditions were log β_CuL=3.5±0.1 and log β_CuL2= 8.0±0.2. For lower total ligand and total metal ion concentrations, used in voltammetry, the interaction Cu(II)‐pectin is affected by a cooperative mode (increase of metal ion‐ligand affinity) when the total metal ion concentration increases and by an anti‐cooperative mode when the total ligand concentration increases, possibly due to different conformations of the polymer.     

Proton‐Transfer Reaction Dynamics and Energetics in Calcification and Decalcification

CaCO₃‐saturated saline waters at pH values below 8.5 are characterized by two stationary equilibrium states: reversible chemical calcification/decalcification associated with acid dissociation, Ca²⁺+HCO₃^??CaCO₃+H⁺; and reversible static physical precipitation/dissolution, Ca²⁺+CO₃^2??CaCO₃. The former reversible reaction was determined using a strong base and acid titration. The saturation state described by the pH/P_CO2‐independent solubility product, [Ca²⁺][CO₃^2?], may not be observed at pH below 8.5 because [Ca²⁺][CO₃^2?]/([Ca²⁺][HCO₃^?]) ?1. Since proton transfer dynamics controls all reversible acid dissociation reactions in saline waters, the concentrations of calcium ion and dissolved inorganic carbon (DIC) were expressed as a function of dual variables, pH and P_CO2. The negative impact of ocean acidification on marine calcifying organisms was confirmed by applying the experimental culture data of each P_CO2/pH‐dependent coral polyp skeleton weight (Wskel) to the proton transfer idea. The skeleton formation of each coral polyp was performed in microspaces beneath its aboral ectoderm. This resulted in a decalcification of 14 weight %, a normalized CaCO₃ saturation state Λ of 1.3 at P_CO2 ≈400 ppm and pH ≈8.0, and serious decalcification of 45 % and Λ 2.5 at P_CO2 ≈1000 ppm and pH ≈7.8.     

A Structural Study of the Iminodiacetate Moiety Conformation in N‐(1‐adamantyl)‐iminodiacetate(2‐) Copper(II) Complexes

N,N‐bis(carboxymethyl)‐1‐adamantylamine acid (H₂BCAA) or N‐(1‐adamantyl)‐iminodiacetic acid forms zwitterions that are intra‐stabilized by a ‘bifurcated’ N⁺‐H···O(carboxyl)₂ interaction. In the crystal, both half‐protonated carboxyl groups of H₂BCAA^± are involved in linear O‐H···O inter‐molecular bridges of 2.46Å. In the studied BCAA‐Cu^II derivatives, the iminodiacetate‐moiety of the BCAA chelating ligand exhibits a mer‐NO₂ conformation in [Cu(BCAA)(H₂O)₂] ( 1 ) and [Cu(BCAA)(Him)]₂ ( 2 ), but a fac‐O₂+N(apical) conformation in [Cu(BCAA)(bpy)(H₂O)]·3.5H₂O ( 3 ) [Him = imidazole, bpy =2,2′‐bipyridine]. In clear contrast, dipyridylamine (dpya), as auxiliary ligand, seems to be unable to promote the fac‐O₂+N(apical) conformation in BCAA, as reveal the structures of two new salts with the trinuclear cation [(dpya)₂Cu‐μ₂‐Cu(BCAA)₂‐Cu(dpya)₂]²⁺ and the anions [Cu(BCAA)₂]^2? ( 4 ) or NO₃^? ( 5 ), respectively.     

Cu(II) and Ni(II)‐1,10‐phenanthroline‐ 5,6‐dione‐amino acid ternary complexes exhibiting pH‐sensitive redox properties

Syntheses, and electrochemical properties of two novel complexes, [Cu(phendio)(L ‐Phe)(H₂O)](ClO₄) ·H₂O (1) and [Ni(phendio)(Gly)(H₂O)](ClO₄)·H₂O (2) (where phendio = 1,10‐phenanthroline‐5,6‐dione, L ‐Phe = L ‐phenylalanine, Gly = glycine), are reported. Single‐crystal X‐ray diffraction results of (1) suggest that this complex structure belongs to the orthorhombic crystal system. The electrochemical properties of free phendio and these complexes in phosphate buffer solutions in a pH range between 2 and 9 have been investigated using cyclic voltammetry. The redox potential of these compounds is strongly dependent on the proton concentration in the range of ? 0.3–0.4 V vs SCE (saturated calomel reference electrode). Phendiol reacts by the reduction of the quinone species to the semiquinone anion followed by reduction to the fully reduced dianion. At pH lower than 4 and higher than 4, reduction of phendio proceeds via 2e^?/3H⁺ and 2e^?/2H⁺ processes. For complexes (1) and (2), being modulated by the coordinated amino acid, the reduction of the phendio ligand proceeds via 2e^?/2H⁺ and 2e^?/H⁺ processes, respectively. Copyright © 2006 John Wiley & Sons, Ltd.     

Copper(II) complexes of hydroxyflavone derivatives as potential bioactive molecule to combat antioxidants: synthesis,characterization and pharmacological activities

A variety of novel copper complexes were synthesized and characterized of the formulae [Cu(L¹)(OAc)], [CuL²(H₂O)], [CuL³(H₂O)], [CuL⁴(OAc)], [CuL⁵(H₂O)] [CuL⁶], [CuL⁷], [CuL⁸](OAc) and [CuL⁹], where L¹ L⁹ represents Schiff base ligands [derived by the condensation of 5‐hydroxyflavone with 4‐aminoantipyrine (L¹), o‐aminophenol (L²), o‐aminobenzoic acid (L³), o‐aminothiazole (L⁴), thiosemicarbazide (L⁵), 4‐aminoantipyrine‐o‐aminophenol (L⁶), 4‐aminoantipyrine‐o‐aminobenzoic acid (L⁷), 4‐aminoantipyrine‐o‐aminothiazole(L⁸) and 4‐aminoantipyrine‐thiosemicarbazide (L⁹)]. The spectral and magnetic results of the Cu(II) complexes exhibit square planar geometry. The DNA binding properties of copper complexes were studied by using electronic absorption spectra, viscosity and thermal denaturation experiments. The results show that the complexes were interacting with calf thymus (CT DNA). The in vitro antimicrobial activities of the investigated compounds were tested against the bacterial species and fungal species. Superoxide dismutase and antioxidant activities of the copper complexes have also been studied. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability constants of adducts of succinate copper(II) complexes with β‐cyclodextrin determined by capillary electrophoresis

Cyclodextrins (CD) form inclusion complexes with different “guests” owing to the fact that the shape of the CD molecule is a truncated cone with a hydrophobic cavity. The adducts of CD with metal complexes remain scantily explored. In this study, the stability constants of the adducts between succinate copper(II) complexes and β‐CD was determined using capillary electrophoresis. The β‐CD concentration in background electrolytes (BGE) was found to influence on the effective electrophoretic mobility of the copper(II) complexes in succinate BGEs. It was shown that succinic acid and its anions and copper(II) ions did not form a significant amount of the inclusion complexes with β‐CD and the mobility change was caused by the adduct formation between succinate copper(II) complexes and β‐CD. The stability constants of these adducts were determined at 25°С and ionic strength of 0.100 M: log β(CuL₂²⁻/β‐CD) = 1.76 ± 0.06, log β(CuL⁰/β‐CD) = 0.98 ± 0.09. The [CuHL]⁺ and [CuHL₂]⁻ species were found to do not form adducts with β‐CD.     

Copper(II), Cobalt(II), and Nickel(II) Complexes of two Novel Pyridine‐derived Macrocyclic Ligands bearing o‐ and pNitrobenzyl Pendant Groups

The pendant‐armed ligands L¹ and L² were synthesized by N‐alkylation of the four secondary amine groups of the macrocyclic precursor L using o‐nitrobenzylbromide (L¹) and p‐nitrobenzylbromide (L²). Nitrates and perchlorates of Cu^II, Ni^II and Co^II were used to synthesize the metal complexes of both ligands and the complexes were characterized by microanalysis, MS‐FAB, conductivity measurements, IR and UV‐Vis spectroscopy and magnetic studies. The crystal structures of L¹, [CuL¹](ClO₄)₂·CH₃CN·H₂O, [CuL²](ClO₄)₂·6CH₃CN, [CuL²][Cu(NO₃)₄]·5CH₃CN·0.5CH₃OH and [NiL²](ClO₄)₂·3CH₃CN·H₂O were determined by single crystal X‐ray crystallography. These structural analysis reveal the free ligand L¹, three mononuclear endomacrocyclic complexes {[CuL¹](ClO₄)₂·CH₃CN·H₂O, [CuL²](ClO₄)₂·6CH₃CN and [NiL²](ClO₄)₂·3CH₃CN·H₂O} and one binuclear complex {[CuL²][Cu(NO₃)₄]·5CH₃CN·0.5CH₃OH} in which one of the metals is in the macrocyclic framework and the other metal is outside the ligand cavity and coordinated to four nitrate ions.     

Catalytic hydrolysis of p‐nitrophenyl picolinate by copper(II) and zinc(II) complexes of N‐(2‐deoxy‐β‐D‐glucopyranosyl‐2‐salicylaldimino)

D‐glucosamine Schiff base N‐(2‐deoxy‐β‐D‐glucopyranosyl‐2‐salicylaldimino) and its Cu(II) and Zn(II) complexes were synthesized and characterized. The hydrolysis of p‐nitrophenyl picolinate (PNPP) catalyzed by ligand and complexes was investigated kinetically by observing the rates of the release of p‐nitrophenol in the aqueous buffers at 25°C and different pHs. The scheme for reaction acting mode involving a ternary complex composed of ligand, metal ion, and substrate was established and the reaction mechanisms were discussed by metal–hydroxyl and Lewis acid mechanisms. The experimental results indicated that the complexes, especially the Cu(II) complex, efficiently catalyzed the hydrolysis of PNPP. The catalytic reactivity of the Zn(II) complex was much smaller than the Cu(II) complex. The rate constant k_N showing the catalytic reactivity of the Cu(II) complex was determined to be 0.299 s^?1 (at pH 8.02) in the buffer. The pK_a of hydroxyl group of the ternary complex was determined to be 7.86 for the Cu(II) complex. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 345–350, 2002     

Self‐assembly properties of Salamo‐type trinuclear Cu(II) and Co(II) complexes based on the regulation of H+/OHˉ

A novel naphthalenediol‐based bis(salamo)‐type tetraoxime compound (H₄L) was designed and synthesized. Two new supramolecular complexes, [Cu₃(L)(μ‐OAc)₂] and [Co₃(L)(μ‐OAc)₂(MeOH)₂]·4CHCl₃ were synthesized by the reaction of H₄L with Cu(II) acetate dihydrate and Co(II) acetate dihydrate, respectively, and were characterized by elemental analyses and X‐ray crystallography. In the Cu(II) complex, Cu1 and Cu2 atoms located in the N₂O₂ sites, and are both penta‐coordinated, and Cu3 atom is also penta‐coordinated by five oxygen atoms. All the three Cu(II) atoms have geometries of slightly distorted tetragonal pyramid. In the Co(II) complex, Co1 and Co3 atoms located in the N₂O₂ sites, and are both penta‐coordinated with geometries of slightly distorted triangular bipyramid and distorted tetragonal pyramid, respectively, while Co2 atom is hexa‐coordinated by six oxygen atoms with a geometry of slightly distorted octahedron. These self‐assembling complexes form different dimensional supramolecular structures through inter‐ and intra‐molecular hydrogen bonds. The coordination bond cleavages of the two complexes have occurred upon the addition of the H⁺, and have reformed again via the neutralization effect of the OH^?. The changes of the two complexes response to the H⁺/OH^? have observed in the UV–Vis and ¹H NMR spectra.     

Copper(II) Complexes of ω‐Hydroxy‐Functionalized N‐Salicylidenehydrazides show pH‐Controlled Switching between Dicationic Dimers and Neutral One‐Dimensional Coordination Polymers

New copper(II) complexes of the hydrazone ligands H₂salhyhb, H₂salhyhp, and H₂salhyhh, derived from salicylaldehyde and ω‐hydroxy carbonic acid hydrazides, have been synthesized and physically characterized. Two fundamental structures were found in solid state depending on the pH‐value of the reaction solution. Acidic conditions lead to the formation of the di‐μ‐phenoxo‐bridged dicationic complex dimers [{Cu(Hsalhyhb)}₂]²⁺ ( 1a ), [{Cu(Hsalhyhp)}₂]²⁺ ( 2a ), and [{Cu(Hsalhyhh)}₂]²⁺ ( 3a ), isolated as perchlorate salts. The dimeric complexes show strong antiferromagnetic coupling with J = ?399 ( 1a ), ?410 ( 2a ), and ?311 cm^?1 ( 3a ). Higher pH‐values resulted in the aggregation of neutral copper ligand fragments to the one‐dimensional coordination polymers [{Cu(salhyhb)}_n] ( 1b ), [{Cu(salhyhp)}_n] ( 2b ), and [{Cu(salhyhh)}_n] ( 3b ). 3b has been examined by means of X‐ray crystallography and represents the first example of a structurally characterized neutral copper(II) N‐salicylidenehydrazide complex without additional ligands. The magnetic interactions in the polymers are also antiferromagnetic with J = ?125 ( 1b ), ?136 ( 2b ), and ?148 cm^?1 ( 3b ), but strongly reduced compared to the corresponding dimeric complexes. The two basic structure types can be reversibly interconverted simply by pH‐control.     

Thermally Triggered Solid‐State Single‐Crystal‐to‐Single‐Crystal Structural Transformation Accompanies Property Changes

The 1D complex [(CuL_0.5H₂O) ? H₂O]_n ( 1 ) (H₄L=2,2′‐bipyridine‐3,3′,6,6′‐tetracarboxylic acid) undergoes an irreversible thermally triggered single‐crystal‐to‐single‐crystal (SCSC) transformation to produce the 3D anhydrous complex [CuL_0.5]_n ( 2 ). This SCSC structural transformation was confirmed by single‐crystal X‐ray diffraction analysis, thermogravimetric (TG) analysis, powder X‐ray diffraction (PXRD) patterns, variable‐temperature powder X‐ray diffraction (VT–PXRD) patterns, and IR spectroscopy. Structural analyses reveal that in complex 2 , though the initial 1D chain is still retained as in complex 1 , accompanied with the Cu‐bound H₂O removed and new O(carboxyl)?Cu bond forming, the coordination geometries around the Cu^II ions vary from a distorted trigonal bipyramid to a distorted square pyramid. With the drastic structural transition, significant property changes are observed. Magnetic analyses show prominent changes from antiferromagnetism to weak ferromagnetism due to the new formed Cu1‐O‐C‐O‐Cu4 bridge. The catalytic results demonstrate that, even though both solid‐state materials present high catalytic activity for the synthesis of 2‐imidazolines derivatives and can be reused, the activation temperature of complex 1 is higher than that of complex 2 . In addition, a possible pathway for the SCSC structural transformations is proposed.     

Synthesis and characterization of graphene oxide‐based hybrid ligand and its metal complexes: Highly efficient sensor and catalytic properties

A new graphene oxide‐based hybrid material (HL) and its Co(II), Cu(II) and Ni(II) metal complexes were prepared. Firstly, graphene oxide and (3‐aminopropyl)trimethoxysilane were reacted to give graphene oxide–3‐(aminopropyl)trimethoxysilane (GO‐APTMS) hybrid material. After that, hybrid material HL was synthesized from the reaction of GO‐APTMS and 2,6‐diformyl‐4‐methylphenol. Finally, Co(II), Cu(II) and Ni(II) complexes of HL were obtained. All the materials were characterized using various techniques. The chemosensor properties of HL were investigated against Na⁺, K⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Zn²⁺, Al³⁺, Cr³⁺, Fe³⁺ and Mn³⁺ ions and it was found that HL has selective chemosensing to Fe³⁺ ion. All the graphene oxide‐supported complexes were used as heterogeneous catalysts in the oxidation of 2‐methylnaphthalene (2MN) to 2‐methyl‐1,4‐naphthoquinone (vitamin K₃, menadione) in the presence of hydrogen peroxide, acetic acid and sulfuric acid. The Cu(II) complex showed good catalytic properties compared to the literature. The selectivity of 2MN to vitamin K₃ was 60.23% with 99.75% conversion using the Cu(II) complex.