DFT Studies of Ag‐Loading Intrinsic and Functionalized Single‐Walled Carbon Nanotubes

The first principles study was performed on the stability of Ag adsorbed on the internal walls of single‐walled carbon nanotube (SWCNT) and loaded on acid modified SWCNT. The calculation results show that Ag can be adsorbed stably on the internal walls of SWCNT. With the increase of SWCNT diameter, the adsorption energy increases in a certain range. Ag can also be loaded on the modified SWCNT surface in the form of COOAg and OAg groups, and COOAg group is more stable than OAg group. For either the adsorption on the inner SWCNT or the load on the modified SWCNT surface, only a small proportion of the Ag ions can be stably bonded to the walls of SWCNT.     

A Sensitive Simultaneous Determination of Adrenalin and Paracetamol on a Glassy Carbon Electrode Coated with a Film of Chitosan/Room Temperature Ionic Liquid/Single‐Walled Carbon Nanotubes Nanocomposite

The present work demonstrates that simultaneous determination of adrenalin (AD) and paracetamol (PAR) can be performed on single‐walled carbon nanotube/chitosan/ionic liquid modified glassy carbon electrode (SWCNT‐CHIT‐IL/GCE). The electro‐oxidations of AD and PAR were investigated with cyclic voltammetry (CV), differential pulse voltammetry (DPV) and also chronoamperometry (CA) methods. DPV experiments showed that the oxidation peak currents of AD and PAR are proportional to the corresponding concentrations over the 1–580 μmol/L and 0.5–400 μmol/L ranges, respectively. The RSD at a concentration level of 15 μmol/L AD and 15 μmol/L PAR were 1.69% and 1.82%, respectively. Finally the modified electrode was used for simultaneous determination of AD and PAR in real samples with satisfactory results.     

The Heterogeneity of Multiwalled and Single‐Walled Carbon Nanotubes: Iron Oxide Impurities Can Catalyze the Electrochemical Oxidation of Glucose

It is well established that the heterogeneity of carbon nanotubes must be determined before the origin of the electrochemical performance can be attributed. Recently it has been diligently reported that for the case of multiwalled carbon nanotube modified electrodes, copper oxide impurities are responsible for the electrochemical activity facilitating a nonenzymatic sensing strategy towards glucose. We have explored both commercially available multiwalled and single‐walled carbon nanotubes for the sensing of glucose and find that iron oxide impurities remaining from the fabrication process are the electroactive sites facilitating the nonenzymatic detection of glucose. Given that the multiwalled carbon nanotubes in this work are purchased from the same leading supplier as that used recently, discrepancies in the fabrication process exist which clearly has implications in the commercialization of electrochemical sensors based on multiwalled carbon nanotubes.     

微波辅助有机过氧化物功能化修饰单壁碳纳米管

本文报道了微波辅助下,利用过氧化月桂酰分解得到的十一烷基,化学功能化修饰单壁碳纳米管。这种快速、高效的方法将反应时间缩短至10分钟,并得到了比传统回流方法具有更高接枝率的产物。利用傅立叶变换红外光谱(FT-IR),热失重分析(TGA),拉曼光谱,探究了不同的反应时间和微波功率对单壁碳纳米管的接枝率的影响。结果表明：过长的反应时间会导致部分的去功能化的发生,而过高的微波功率(大于900瓦),则会将单壁碳纳米管上起初键连上的十一烷基剥落下来。分散性照片和高分辨率透射电子显微镜(HRTEM)照片显示出,功能化后的单壁碳纳米管与原始的碳管相比,在有机溶剂中的分散性有了明显的提高。     

A Highly Sensitive Electrochemical Immunosensor for Fumonisin B1 Detection in Corn Using Single‐Walled Carbon Nanotubes/Chitosan

A sensitive electrochemical immunosensor was developed for detecting fumonisin B₁ (FB₁) in corn using the single‐walled carbon nanotubes/chitosan. The detection mechanism of immunosensor was based on an indirect competitive binding to a fixed amount of anti‐FB₁ between free FB₁ and FB₁‐bovine serum albumin, which was conjugated on covalently functionalized nanotubes/chitosan laid on the glass carbon electrode. The anti‐rabbit immunoglobulin G secondary antibody labeled with alkaline phosphatase was then bound to the electrode surface through reactisubstrate α‐naphthyl phosphate, which produced electrochemical signal. Under optimized conditions, this method could detect FB₁ from 0.01 to 1000 ng mL^?1 with a detection limit of 2 pg mL^?1. This is well below the detection limit required from European Union legislation, 2–4 mg L^?1. Moreover, good recoveries were obtained for the detection of spiked corn samples and actual corn samples. As the method has good sensitivity and recovery for detecting FB₁, it is a practical detection method.     

Carbon Nanotubes Fed on “Carbs”: Coating of Single‐Walled Carbon Nanotubes by Dextran Sulfate

A facile and easily reproducible technique for assembling biohybrid nanoparticles is a core feature that is highly desired for biomedical applications, considering the nature and limited lifespan of the biopolymers used. Here we show a simple and effective method to enfold single‐walled carbon nanotubes (SWNTs) using an anionic polysaccharide, dextran sulfate. After their interactions, SWNTs were rendered dispersible in aqueous solution and were shortened and unbundled to their basic dimension. Atomic force microscopy analysis was extensively employed to elucidate the mechanism of their interfacing. This biohybrid nanoparticle holds promise for biological and biomedical applications due to the synergistic unique properties of SWNTs and dextran sulfate.

     

Direct Electrochemistry of Hemoglobin on Single‐Walled Carbon Nanotubes Modified Carbon Ionic Liquid Electrode and Its Electrocatalysis

In this article we report on the fabrication of a carbon ionic liquid electrode (CILE) by using a room temperature ionic liquid of 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) as binder. It was further modified by single‐walled carbon nanotubes (SWCNTs) to get a SWCNTs modified CILE denoted as SWCNTs/CILE. The redox protein of hemoglobin (Hb) was further immobilized on the surface of SWCNTs/CILE with the help of Nafion film. UV‐vis and FT‐IR spectra indicated that the immobilized Hb retained its native conformation in the composite film. The direct electrochemistry of Hb on the SWCNTs/CILE was carefully studied in pH 7.0 phosphate buffer solution (PBS). Cyclic voltammetric results indicated that a pair of well‐defined and quasireversible voltammetric peaks of Hb heme Fe(III)/Fe(II) was obtained with the formal potential (E°') at ?0.306 V (vs. SCE). The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n) and the apparent heterogeneous electron transfer rate constant (k_s) were calculated as 0.34, 0.989 and 0.538 s^?1, respectively. The fabricated Hb modified electrode showed good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) in the concentration range from 20.0 to 150.0 mmol/L with the detection limit of 10.0 mmol/L (3σ).     

Transparent and Conductive Polyethylene Oxide Film by the Introduction of Individualized Single‐Walled Carbon Nanotubes

It is demonstrated that an optically transparent and electrically conductive polyethylene oxide (PEO) film is fabricated by the introduction of individualized single‐walled carbon nanotubes (SWNTs). The incorporated SWNTs in the PEO film sustain their intrinsic electronic and optical properties and, in addition, the intrinsic properties of the polymer matrix are retained. The individualized SWNTs with smaller diameter provide high transmittance as well as good electrical conductivity in PEO films.

     

Spatially Controllable DNA Condensation by a Water‐Soluble Supramolecular Hybrid of Single‐Walled Carbon Nanotubes and β‐Cyclodextrin‐Tethered Ruthenium Complexes

A supramolecular hybrid is prepared by the supramolecular surface modification of single‐walled carbon nanotube (SWCNT) with cationic β‐cyclodextrin‐tethered ruthenium complexes through a spacer molecule that contains both an adamantane and a pyrene moiety. By employing the supramolecular hybrid, spatially controllable DNA condensation along the SWCNT skeleton is achieved by anchoring cationic ruthenium complexes on the surface. Furthermore, because of the unique physiological properties of SWCNTs, the cationic supramolecular hybrid can be used as a nonviral gene delivery system with the ruthenium complexes as a fluorescent probe to monitor uptake of DNA by cells.     

Voltammetric Determination of Xanthine with a Single‐Walled Carbon Nanotube‐Ionic Liquid Paste Modified Glassy Carbon Electrode

Single‐walled carbon nanotube (SWNT) and room temperature ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexaflourophosphate, BMIMPF₆) were used to fabricate paste modified glassy electrode (GCE). It was found that the electrode showed sensitive voltammetric response to xanthine (Xt). The detection limit was 2.0×10^?9 M and the linear range was 5.0×10^?9 to 5.0×10^?6 M. The electrode also displayed good selectivity and repeatability. In the presence of uric acid (UA) and hypoxanthine (Hx) the response of Xt kept almost unchanged. Thus this electrode could find application in the determination of Xt in some real samples. The analytical performance of the BMIMPF₆‐SWNT/GCE was demonstrated for the determination of Xt in human serum and urine samples.     

Electrooxidation of Chlorophenols Catalyzed by Nickel Octadecylphthalocyanine Adsorbed on Single‐Walled Carbon Nanotubes

We described the synthesis of nickel octadecylphthalocyanine (NiPc(C₁₀H₂₁)₈), followed by its adsorption on single‐walled carbon nanotubes (SWCNT) to form SWCNT‐NiPc(C₁₀H₂₁)₈ conjugates. SWCNT‐NiPc(C₁₀H₂₁)₈ was used to modify a glassy carbon electrode (GCE) and for the electrooxidation of 4‐chlorophenol and 2,4‐dichlorophenol. The SWCNT and NiPc(C₁₀H₂₁)₈ have a synergistic effect on each other in terms of improving electrocatalysis for the detection of chlorophenols. The stability of the electrode improved in the presence of NiPc(C₁₀H₂₁)₈ or NiPc compared to the bare GCE. The presence of SWCNT improves the electrocatalytic behaviour of NiPc(C₁₀H₂₁)₈ but not of unsubstituted NiPc. All modified electrodes showed improved stability towards the detection of 2,4‐dichlorophenol. The best stability for 4‐CP detection was observed in the presence of SWCNT for NiPc(C₁₀H₂₁)₈.     

Electrochemical Behavior and Determination of L‐Tyrosine at Single‐walled Carbon Nanotubes Modified Glassy Carbon Electrode

Based on single‐walled carbon nanotubes (SWCNTs) modified glassy carbon electrode (GCE/SWCNTs), a novel method was presented for the determination of L ‐tyrosine. The GCE/SWCNTs exhibited remarkable catalytic and enhanced effects on the oxidation of L ‐tyrosine. In 0.10 mol/L citric acid‐sodium citrate buffer solution, the oxidation potential of L ‐tyrosine shifted negatively from +1.23 V at bare GCE to +0.76 V at GCE/SWCNTs. Under the optimized experimental conditions, the linear range of the modified electrode to the concentration of L ‐tyrosine was 5.0×10^?6–2.0×10^?5 mol/L (R₁=0.9952) and 2.7×10^?5–2.6×10^?4 mol/L (R₂=0.9998) with a detection limit of 9.3×10^?8 mol/L. The kinetic parameters such as α (charge transfer coefficient) and D (diffusion coefficient) were evaluated to be 0.66, 9.82×10^?5 cm² s^?1, respectively. And the electrochemical mechanism of L ‐tyrosine was also discussed.     

Polyaniline/Single‐Walled Carbon Nanotubes Composite Based Triglyceride Biosensor

Nanocomposite film comprising of polyaniline (PANI) and single walled carbon nanotubes (SWCNT) has been fabricated onto indium‐tin‐oxide (ITO) coated glass plate using electrophoretic technique. Co‐immobilization of glycerol dehydrogenase (GDH) and lipase (LIP) has been done via N‐ethyl‐N′‐(3‐dimethylaminopropyl) carbodiimide and N‐hydroxysuccinimide chemistry to explore its application for triglyceride (tributyrin) sensing. Response studies have been done using linear sweep voltammetry revealing that LIP‐GDH/PANI‐SWCNT‐TB/ITO bioelectrode can detect tributyrin in the range of 50 to 400 mg dL^?1 with low Michaelis–Menten constant of 1.138 mM, improved response time of 12 s, high sensitivity as 4.28×10^?4 mA mg^?1 dL and storage stability of about 13 weeks.     

Sorting Semiconducting Single‐Walled Carbon Nanotubes by Water‐Soluble Polyfluorene Assisted Electrophoresis and Its Application in Field‐effect Transistors

We report a considerably promising method based on agarose gel electrophoresis (AGE) to separate single‐walled carbon nanotubes by adding a water‐soluble polyfluorene (w‐PFO) as surfactant into the agarose gel. In this effective method, the AGE/w‐PFO gel network will trap more semiconducting single‐walled carbon nanotubes (SWNTs) with the assistance of w‐PFO, for the strong interaction between w‐PFO and semiconducting species. The optical absorbance, photoluminescence emission and resonant Raman scattering characterization were used to verify the separation effect. The purity of separated semiconducting species is as high as (98±1)%. The demonstrated field effect transistors give the on/off ratio and mobility about 27000 and 10.2 cm²·V^?1·s^?1, respectively.     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

Paste Electrode Based on Short Single‐Walled Carbon Nanotubes and Room Temperature Ionic Liquid: Preparation,Characterization and Application in DNA Detection

A paste electrode (SWNT&RTIL PE) has been prepared using carboxylic group‐functionalized short single‐walled carbon nanotubes (SWNTs) mixed with 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆, one kind of room temperature ionic liquid, RTIL). Its electrochemical behavior was investigated by cyclic voltammetry and electrochemical impedance spectroscopy in comparison with the paste electrode using mineral oil as a binder. Results highlighted the advantages of the paste electrode: not only higher conductivity, but also lower potential separation (ΔE_p), higher peak current (i_p) and better reversibility towards dopamine (DA), methylene blue (MB) and K₃[Fe(CN)₆]. The SWNT&RTIL PE could be used to detect the number of guanine bases and adenine bases contents in per mol oligonucleotides according to the current response in the range of 0.05–2.0 nM. Based on the current response of guanine bases, oligonucleotides could be detected sensitively in the B–R buffer solution with a detection limit of 9.9 pM. The heterogeneous electron transfer rate constant (k_s) of guanine bases contents in the oligonucleotides was investigated and its value was 0.90 s^?1. In essence the SWNT&RTIL PE showed high sensitivity, reliability, stability and reproducibility for the detection of DNA.     

Single‐Walled Carbon Nanotubes Modified Gold Electrodes as an Impedimetric DNA Sensor

A gold surface modified with a self‐assembled monolayer of 11‐amino‐1‐undecanethiol (AUT) was used for the covalent immobilization of oxidized single‐walled carbon nanotubes (SWNTs). The as‐described SWNTs‐modified substrate was subsequently used to attach single‐stranded deoxyribonucleic acid (ssDNA) used as a substrate for DNA hybridization. Electrochemical impedance spectroscopy measurements were performed to follow the DNA hybridization process by using the redox couple [Fe(CN)₆]^3−/4− as a marker ion. Specifically, changes in charge transfer resistance obtained from the Nyquist plots were used as the sensing parameter of DNA hybridization. The substrate sensitivity towards changes in target DNA concentration, its selectivity toward different DNA sequences and its reusability are successfully demonstrated in this report.     

Functionalization of Single‐Walled Carbon Nanotubes

Through chemical functionalization of single‐walled carbon nanotubes, the prerequisites for possible applications of such nanostructures are established. The derivatized tubes differ from the crude materials in their good solubility, which enables both a more extensive characterization and subsequent chemical reactivity. Current derivatization methods include defect and covalent sidewall functionalization, as well as noncovalent exo‐ and endohedral functionalization. In this way, for example, a range of nanotubes can be prepared: with sidewall substituents, wrapped with polymers, or with guest molecules included. The current state of the literature is presented in this Minireview.