Reactions involving CO2, H2O,and NH3: The formation of (i) carbamic acid, (ii) urea,and (iii) carbonic acid

A complete understanding of the synthesis of urea, (NH₂)₂CO, from NH₃, CO₂, and H₂O remains an unsolved problem. It is considered that the formation of the intermediate ammonium carbamate (or the equivalent carbamic acid) takes place through the interaction of neutral species, and that this part of the synthesis is open to ab initio computations. Such calculations are reported on the formation of carbamic acid from NH₃, CO₂, and H₂O. We have also investigated the formation of carbonic acid from CO₂ and H₂O showing that the six-membered ring transition state is non-planar, in contradiction with earlier reported calculations.     

Mechanism of a chemical classic: quantum chemical investigation of the autocatalyzed reaction of the serendipitous wöhler synthesis of urea

The detailed reaction pathways for the ammonium cyanate transformation into urea (W?hler's reaction) in the gas phase, in solution, and in the solid state have exhaustively been explored by means of first-principles quantum chemical calculations at the B3LYP level of theory using the 6-31G(d,p) basis set. This serendipitous synthesis of urea is predicted to proceed in two steps; the first step involves the decomposition of the ammonium cyanate to ammonia and isocyanic or cyanic acid, and the second one, which is the main reaction step (and probably the rate-determining step), involves the interaction of NH(3) with either isocyanic or cyanic acid. Several alternative pathways were envisaged for the main reaction step of W?hler's reaction in a vacuum involving the formation of "four-center" transition states. Modeling W?hler's reaction in aqueous solution and in the solid state, it was found that the addition of NH(3) to both acids is assisted (autocatalyzed) by the active participation of extra H(2)O and/or NH(3) molecules, through a preassociative, cooperative, and hydrogen-transfer relay mechanism involving the formation of "six-center" or even "eight-center" transition states. The most energetically economic path of the rate-determining step of W?hler's reaction is that of the addition of NH(3) to the C=N double bond of isocyanic acid, directly affording urea. An alternative pathway corresponding to the anti-addition of ammonia to the Ctbd1;N triple bond of cyanic acid, yielding urea's tautomer HN=C(OH)NH(2), seems to be another possibility. In the last case, urea is formed through a prototropic tautomerization of its enolic form. The energies of the reactants, products, and all intermediates along with the barrier heights for each reaction path have been calculated at the B3LYP/6-31G(d,p) level of theory. The geometry optimization and characterization of all of the stationary points found on the potential energy hypersurfaces was performed at the same level of theory.     

Amperometric Urea Biosensor Using Aminated Glassy Carbon Electrode Covered with Urease Immobilized Carbon Sheet,Based on the Electrode Oxidation of Carbamic Acid

A large oxidation current can be observed when ammonium carbamate aqueous solution is electrolyzed using a glassy carbon electrode (GCE) at a potential exceeding 1.0 V vs. Ag/AgCl and amino groups are introduced at the surface of the GCE. Aminated GCE exhibits the electrocatalytic activity of the oxidation of ammonium carbamate that is produced from urea as an intermediate product of urease reaction, and a distinct oxidation current is observed when the aminated GCE is used to oxidize the urea in the urease solution. A novel amperometric determination method to detect urea has been developed. This method is based on the electrooxidation of carbamic acid produced during urease reactions. Urease is immobilized to polymaleimidostyrene (PMS) coated on the insulated amorphous carbon sheet set on the aminated GCE surface. A good linear relationship is observed between urea concentration and the electrolytic current of the urease‐immobilized electrode in the concentration range from 0.5 mM to 21.0 mM. The proposed urea biosensor has an effective merit in that the interference resulting from ammonia and pH change caused by the urease reaction can be eliminated, differing from conventional urea biosensors.     

A computational study of the heats of reaction of substituted monoethanolamine with CO2

Various amines have been considered as materials for chemical capture of CO(2) through liquid-phase reactions to form either carbamate or carbamic acid products. One of the main challenges in these CO(2)-amine reactions lies in tuning the heat of reaction to achieve the correct balance between the extent of reaction and the energy cost for regeneration. In this work, we use a computational approach to study the effect of substitution on the heats of reaction of monoethanolamine (MEA). We use ab initio methods at the MP2/aug-cc-pVDZ level, coupled with geometries generated from B3LYP/6-311++G(d,p) density functional theory along with the conductor-like polarizable continuum model to compute the heats of reaction. We consider two possible reaction products: carbamate, having a 2:1 amine:CO(2) reaction stoichiometry, and carbamic acid, having a 1:1 stoichiometry. We have considered CH(3), NH(2), OH, OCH(3), and F substitution groups at both the α- and β-carbon positions of MEA. We have experimentally measured heats of reaction for MEA and both α- and β-CH(3)-substituted MEA to test the predictions of our model. We find quantitative agreement between the predictions and experiments. We have also computed the relative basicities of the substituted amines and found that the heats of reaction for both carbamate and carbamic acid products are linearly correlated with the computed relative basicities. Weaker basicities result in less exothermic heats of reaction. Heats of reaction for carbamates are much more sensitive to changes in basicity than those for carbamic acids. This leads to a crossover in the heat of reaction so that carbamic acid formation becomes thermodynamically favored over carbamate formation for the weakest basicities. This provides a method for tuning the reaction stoichiometry from 2:1 to 1:1.     

Equilibrium vs ground-state planarity of the CONH linkage

Planarity of the XC(=)NHY linkage has been investigated in unprecedented detail in a number of relatively simple compounds, including formamide (X = Y = H), acetamide (X = CH3, Y = H), urea (X = NH2, Y = H), carbamic acid (X = OH, Y = H), and methyl carbamate (X = OCH3, Y = H). Reliable estimates of the equilibrium structures of formamide, cyanamide, acetamide, urea, carbamic acid, methylamine, dimethyl ether, and methyl carbamate are derived, mostly for the first time. It is shown that formamide, considered prototypical for the amide linkage, is not typical as it has a planar equilibrium amide linkage corresponding to a single-minimum inversion potential around N. In contrast, several molecules containing the CONH linkage seem to have a pyramidalized nitrogen at equilibrium and a double-minimum inversion potential with a very small inversion barrier allowing for an effectively planar ground-state structure. Observables of rotational spectroscopy, including ground-state inertial defects, quadrupole coupling and centrifugal distortion constants, and dipole moment components, as well as equilibrium C=O and C-N bond lengths are reviewed in their ability to indicate the planarity of the effective and possibly the equilibrium structures.     

Mechanisms and kinetics for sorption of CO2 on bicontinuous mesoporous silica modified with n-propylamine

We studied equilibrium adsorption and uptake kinetics and identified molecular species that formed during sorption of carbon dioxide on amine-modified silica. Bicontinuous silicas (AMS-6 and MCM-48) were postsynthetically modified with (3-aminopropyl)triethoxysilane or (3-aminopropyl)methyldiethoxysilane, and amine-modified AMS-6 adsorbed more CO(2) than did amine-modified MCM-48. By in situ FTIR spectroscopy, we showed that the amine groups reacted with CO(2) and formed ammonium carbamate ion pairs as well as carbamic acids under both dry and moist conditions. The carbamic acid was stabilized by hydrogen bonds, and ammonium carbamate ion pairs formed preferably on sorbents with high densities of amine groups. Under dry conditions, silylpropylcarbamate formed, slowly, by condensing carbamic acid and silanol groups. The ratio of ammonium carbamate ion pairs to silylpropylcarbamate was higher for samples with high amine contents than samples with low amine contents. Bicarbonates or carbonates did not form under dry or moist conditions. The uptake of CO(2) was enhanced in the presence of water, which was rationalized by the observed release of additional amine groups under these conditions and related formation of ammonium carbamate ion pairs. Distinct evidence for a fourth and irreversibly formed moiety was observed under sorption of CO(2) under dry conditions. Significant amounts of physisorbed, linear CO(2) were detected at relatively high partial pressures of CO(2), such that they could adsorb only after the reactive amine groups were consumed.     

A spectroscopic study of model urethanes

The synthesis, far infrared spectra, temperature-dependent mid-infrared spectra in the carbonyl and NH stretching regions and the Fourier transform Raman spectra are reported for polycrystalline samples of three small diurethanes, 1,3-phenyl di(carbamic acid methyl ester),2,6-toluene di(carbamic acid methyl ester) and 2,4-toluene di(carbamic acid methyl ester). An ab initio geometry optimization is reported for methyl N-phenyl carbamate using STO-3G and 3-21G basis sets, and for the three small diurethanes by molecular mechanics methods using the Dreiding I force field. The results suggest that, in isotropic surroundings, only a very small number of the 256 possible conformers of the urethane groups in the three small diurethanes contribute appreciably to the structure.     

Synthesis of Sulfonimidamides from Sulfenamides via an Alkoxy‐amino‐λ6‐sulfanenitrile Intermediate

Sulfonimidamides are intriguing new motifs for medicinal and agrochemistry, and provide attractive bioisosteres for sulfonamides. However, there remain few operationally simple methods for their preparation. Here, the synthesis of NH‐sulfonimidamides is achieved directly from sulfenamides, themselves readily formed in one step from amines and disulfides. A highly chemoselective and one‐pot NH and O transfer is developed, mediated by PhIO in iPrOH, using ammonium carbamate as the NH source, and in the presence of 1 equivalent of acetic acid. A wide range of functional groups are tolerated under the developed reaction conditions, which also enables the functionalization of the antidepressants desipramine and fluoxetine and the preparation of an aza analogue of the drug probenecid. The reaction is shown to proceed via different and concurrent mechanistic pathways, including the formation of novel S≡N sulfanenitrile species as intermediates. Several alkoxy‐amino‐λ⁶‐sulfanenitriles are prepared with different alcohols, and shown to be alkylating agents to a range of nucleophiles.     

Kinetics of the reversible reaction of CO2(aq) with ammonia in aqueous solution

The kinetics of the interactions of aqueous ammonia with aqueous carbon dioxide/carbonate species has been investigated using stopped-flow techniques by monitoring the pH changes via indicators. The reactions include the reversible formation of ammonium carbamate/carbamic acid. A complete reaction mechanism has been established, and the temperature dependence of all rate and equilibrium constants including the protonation constant of the amine between 15 and 45 °C are reported and analyzed in terms of Arrhenius, Eyring, and van't Hoff relationships.     

A "Nitrate Route" for the low temperature "Fast SCR" reaction over a V2O5-WO3/TiO2 commercial catalyst

A novel mechanism is proposed for the Fast SCR reaction of NH(3), NO and NO(2) at low temperature involving the formation of ammonium nitrate as intermediate and its subsequent reaction with NO as the rate determining step.     

苯基脲与甲醇合成苯氨基甲酸甲酯的研究

采用苯基脲与甲醇反应合成了苯氨基甲酸甲酯,考察了不同催化剂、原料配比及反应工艺条件的影响,确定了适宜的合成条件,并根据产物分布对催化反应机理进行了初步探讨.结果表明,以PbO为催化剂,于140℃反应4h后,苯基脲转化率为95.2%,苯氨基甲酸甲酯收率为80.6%.     

Carbamic acid: molecular structure and IR spectra.

Infrared absorption spectra of mixed H2O, NH3 and 12CO2/13CO2 ices subjected to 1 MeV proton irradiation were investigated. The results of analyses of the spectra suggest formation of carbamic acid at low temperatures. The stability of this compound in the solid phase is attributed to intermolecular hydrogen bonding of the zwitter-ion (NH3+ COO-) structure.     

Mechanistic aspects of the solid-state transformation of ammonium cyanate to urea at high pressure

The chemical transformation of ammonium cyanate into urea has been of interest to many generations of scientists since its discovery by Friedrich W?hler in 1828. Although widely studied both experimentally and theoretically, several mechanistic aspects of this reaction remain to be understood. In this paper, we apply computational methods to investigate the behavior of ammonium cyanate in the solid state under high pressure, employing a theoretical approach based on the self-consistent-charges density-functional tight-binding method (SCC-DFTB). The ammonium cyanate crystal structure was relaxed under external pressure ranging from 0 to 700 GPa, leading to the identification of five structural phases. Significantly, the phase at highest pressure (above 535 GPa) corresponds to the formation of urea molecules. At ca. 25 GPa, there is a phase transition of ammonium cyanate (from tetragonal P4/nmm to monoclinic P21/m) involving a rearrangement of the ammonium cyanate molecules. This transformation is critical for the subsequent transformation to urea. The crystalline phase of urea obtained above 535 GPa also has P21/m symmetry (Z = 2). This polymorph of urea has never been reported previously. Comparisons to the known (tetragonal) polymorph of urea found experimentally at ambient pressure suggests that the new polymorph is more stable above ca. 8 GPa. Our computational studies show that the transformation of ammonium cyanate into urea is strongly exothermic (enthalpy change -170 kJ mol-1 per formula unit between 530 and 535 GPa). The proposed mechanism for this transformation involves the transfer of two hydrogen atoms of the ammonium cation toward nitrogen atoms of neighboring cyanate anions, and the remaining NH2 group creates a C-NH2 bond with the cyanate unit.     

The initial step of silicate versus aluminosilicate formation in zeolite synthesis: a reaction mechanism in water with a tetrapropylammonium template

The initial step for silicate and aluminosilicate condensation is studied in water in the presence of a realistic tetrapropylammonium template under basic conditions. The model corresponds to the synthesis conditions of ZSM5. The free energy profile for the dimer formation ((OH)(3)Si-O-Si-(OH)(2)O(-) or [(OH)(3)Al-O-Si-(OH)(3)](-)) is calculated with ab initio molecular dynamics and thermodynamic integration. The Si-O-Si dimer formation occurs in a two-step manner with an overall free energy barrier of 75 kJ mol(-1). The first step is associated with the Si-O bond formation and results in an intermediate with a five-coordinated Si, and the second one concerns the removal of the water molecule. The template is displaced away from the Si centres upon dimer formation, and a shell of water molecules is inserted between the silicate and the template. The main effect of the template is to slow down the backward hydrolysis reaction with respect to the condensation one. The Al-O-Si dimer formation first requires the formation of a metastable precursor state by proton transfer from Si(OH)(4) to Al(OH)(4)(-) mediated by a solvent molecule. It then proceeds through a single step with an overall barrier of 70 kJ mol(-1). The model with water molecules explicitly included is then compared to a simple calculation using an implicit continuum model for the solvent. The results underline the importance of an explicit and dynamical treatment of the water solvent, which plays a key role in assisting the reaction.     

Gas‐Phase Elimination Reaction of Ethyl (5‐cyanomethyl‐1,3,4‐thiadiazol‐2‐yl)carbamate: A Computational Study

The gas‐phase elimination reaction of ethyl (5‐cyanomethyl‐1,3,4‐thiadiazol‐2‐yl)carbamate has been studied computationally at the MP2/6–31++G(2d,p) level of theory. The values of the activation parameters and rate constants for the thermal decomposition were evaluated over a temperature range from 405.0 to 458.0 K. The temperature dependence of the rate constants was used to deduce the modified Arrhenius expression: log k_{405–458 K} = (9.01 ± 0.49) + (1.32 ± 0.16) log T – (6946 ± 30) 1/T, which is in good agreement with the expression obtained from experimental data. The results confirm that the mechanism is a cis‐concerted elimination that occurs in two steps: The first one corresponds to the formation of ethylene and an intermediate, 5‐(cyanomethyl)‐1,3,4‐thiadiazol‐2‐yl‐carbamic acid, via a six‐membered cyclic transition state, and the second one is the decarboxylation of this intermediate via a four‐membered cyclic transition step, leading to carbon dioxide and the corresponding 1,3,4‐thiadiazole derivative (5‐amino‐1,3,4‐thiadiazole‐2‐acetonitrile). The connectivity of transition states with their respective minima was verified through intrinsic reaction coordinate calculations, and the progress of the reaction was followed by means of Wiberg bond indices, resulting that both transition states have an “early” character, nearer to the reactants than to the products.     

Formation of neutral methylcarbamic acid (CH3NHCOOH) and methylammonium methylcarbamate [CH3NH3+][CH3NHCO2-] at low temperature

We study low temperature reactivity of methylamine (CH3NH2) and carbon dioxide (CO2) mixed within different ratios, using FTIR spectroscopy and mass spectrometry. We report experimental evidence that the methylammonium methylcarbamate [CH3NH3(+)][C3NHCO2(-)] and methylcarbamic acid (CH3NHCOOH) are formed when the initial mixture CH3NH2:CO2 is warmed up to temperatures above 40 K. An excess of CH3NH2 favors the carbamate formation while an excess of CO2 leads to a mixture of both methylammonium methylcarbamate and methylcarbamic acid. Quantum calculations show that methylcarbamic acid molecules are associated into centrosymmetric dimers. Above 230 K, the carbamate breaks down into CH3NH2 and CH3NHCOOH, then this latter dissociates into CH3NH2 and CO2. After 260 K, it remains on the substrate a solid residue made of a well-organized structure coming from the association between the remaining methylcarbamic acid dimers. This study shows that amines can react at low temperature in interstellar ices rich in carbon dioxide which are a privileged place of complex molecules formation, before being later released into "hot core" regions.     

Water gas shift activity of Co-Mo/MgO-Al2O3 catalysts presulfided with ammonium sulfide

Co-Mo/MgO-Al2O3 catalyst was presulfided with ammonium sulfide in aqueous solution and activated with synthesis gas for water gas shift reaction. The assay results indicate that the presulfided Co-Mo/MgO-Al2O3 catalyst exhibits an excellent catalytic activity and stability. XRD and EPR characterization results show that the O-S exchange might occur during the impregnation, leading to the formation of (NH4)2MoS4 (or (NH4)2MoxSy) precursor, which was then thermally decomposed and reduced to MoS2. The higher c...     

Oxyhalogen-sulfur chemistry: kinetics and mechanism of oxidation of N-acetylthiourea by chlorite and chlorine dioxide

The oxidation reactions of N-acetylthiourea (ACTU) by chlorite and chlorine dioxide were studied in slightly acidic media. The ACTU-ClO(2)(-) reaction has a complex dependence on acid with acid catalysis in pH > 2 followed by acid retardation in higher acid conditions. In excess chlorite conditions the reaction is characterized by a very short induction period followed by a sudden and rapid formation of chlorine dioxide and sulfate. In some ratios of oxidant to reductant mixtures, oligo-oscillatory formation of chlorine dioxide is observed. The stoichiometry of the reaction is 2:1, with a complete desulfurization of the ACTU thiocarbamide to produce the corresponding urea product: 2ClO(2)(-) + CH(3)CONH(NH(2))C=S + H(2)O --> CH(3)CONH(NH(2))C=O + SO(4)(2-) + 2Cl(-) + 2H(+) (A). The reaction of chlorine dioxide and ACTU is extremely rapid and autocatalytic. The stoichiometry of this reaction is 8ClO(2)(aq) + 5CH(3)CONH(NH(2))C=S + 9H(2)O --> 5CH(3)CONH(NH(2))C=O + 5SO(4)(2-) + 8Cl(-) + 18H(+) (B). The ACTU-ClO(2)(-) reaction shows a much stronger HOCl autocatalysis than that which has been observed with other oxychlorine-thiocarbamide reactions. The reaction of chlorine dioxide with ACTU involves the initial formation of an adduct which hydrolyses to eliminate an unstable oxychlorine intermediate HClO(2)(-) which then combines with another ClO(2) molecule to produce and accumulate ClO(2)(-). The oxidation of ACTU involves the successive oxidation of the sulfur center through the sulfenic and sulfinic acids. Oxidation of the sulfinic acid by chlorine dioxide proceeds directly to sulfate bypassing the sulfonic acid. Sulfonic acids are inert to further oxidation and are only oxidized to sulfate via an initial hydrolysis reaction to yield bisulfite, which is then rapidly oxidized. Chlorine dioxide production after the induction period is due to the reaction of the intermediate HOCl species with ClO(2)(-). Oligo-oscillatory behavior arises from the fact that reactions that form ClO(2) are comparable in magnitude to those that consume ClO(2), and hence the assertion of each set of reactions is based on availability of reagents that fuel them. A computer simulation study involving 30 elementary and composite reactions gave a good fit to the induction period observed in the formation of chlorine dioxide and in the autocatalytic consumption of ACTU in its oxidation by ClO(2).     

Combustion synthesized crystalline La-Mn perovskite catalysts: Role of fuel molecule on thermal and chemical events

Solution combustion synthesis (SCS) technique was applied to produce LaMnO_3+δ with the aim to investigate the effect of the chemical nature of a series of six fuel molecules (glycine, maleic acid, succinic acid, citric acid, acetic acid, urea) on the combustion reaction mechanism and physicochemical properties of the as-prepared powders. The whole SCS process was found to involve two types of combustion reactions depending on the used sacrificial molecules. Type I (with glycine, maleic acid and succinic acid) was characterized by a one-step exothermic reaction implying a semi-decomposed mixed nitrate-fuel complex and NO₂ arising from manganese nitrate decomposition. The heat emission allows reaching the temperature suitable for well crystallized as-prepared perovskite powders. Type II (with citric acid, acetic acid and urea) was typified by a multi stage process in which intermediate decomposition reactions occurred before the formation of a mixed nitrate-fuel complex. In this case, the heat emission became lower than that expected from stoichiometric reaction, thus limiting the completion of the direct reaction for perovskite production. Consequently, part (with citric acid and acetic acid) or totally (with urea) of lanthanum and manganese remained distinctly combined in two amorphous phases (La(OH)₂NO₃, MnO_x) that were intimately mixed. With respect to other fuels, combustion synthesis, using glycine, produced better crystallized, more defective and performant catalytic perovskite phase toward deep ethanol oxidation.