AN INVESTIGATION ON KINETICS AND REACTIVE SPECIES IN ANIONIC TELOMERIZATION OF BUTADIENE INITIATED BY n-BUTYLLITHIUM/N, N, N'''', N''''-TETRAMETHYLETHYLENE DIAMINE

The polymerization rate of butadiene in toluene initiated by n-butyllithium and tetramethyl ethy-lene diamine as well as the micro-structure and degree of association of polybutadiene were deter-mined. The effect of TMEDA/n-BuLi (abbr. A/Li) and temperature on the polymerization rate,molecular weight, molecular weight distribution and structure of polybutadiene was investigated. Ac-tivation energy of the propagation reaction and chain transfer reaction, together with the chain trans-fer reaction rate constant were estimated. Kinetic parameters and contribution of different reactivespecies to polymerization rate were calculated by Nonlinear Least-Squares Method. A kinetic equa-tion was proposed. The mechanism of anionic chain transfer reaction was discussed.     

EFFECTS OF GELATION RETARDATION ON THERMAL RESPONSE BEHAVIOR OF PNIAPM GELS： A METHOD TO IMPROVE THEIR DESWELLING KINETICS

P(N-isopropylacrylamide)(PNIPAM)prepared by reversible addition fragmentation chain transfer(RAFT) polymerization exhibited gelation retardation.The intermediate before gelation was characterized and indicated the presence of branched or hyperbranched chains.The swelling behavior was investigated,and the gel by RAFT polymerization(RAFT gel)showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional gels(CG).The study was extended to gels prepared by using 2-hydroxy-1-ethanethiol as chain transfer agent and by using low concentration solutions. The two systems also exhibited retardation effects and improved deswelling kinetics.The different swelling behaviors of these gels and CG could be attributed to the presence of dangling chains caused by gelation retardation.     

Fabrication of triple-shelled hollow spheres with optical properties via RAFT polymerization

<正>The triple-shelled hollow spheres with optical properties were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization.After removal the core templates of the poly(styrene),the hollow silica spheres were obtained.The coating process of poly(methyl methacrylate)(PMMA) on the hollow silica spheres surface via surface RAFT polymerization was performed subsequently.The polymers coated on the hollow spheres surfaces were end-functionalized by trithiocarbonate,and they were used as RAFT agent to proceed the chain extension polymerization using Tb complex as monomer.The samples were characterized by FT-IR,SEM and luminescence spectroscopy respectively.The results indicated that the triple-shelled hollow spheres had been prepared successfully and the average diameter of the hollow core was about 1μm.     

Conventional Radical and RAFT Alternating Copolymerizations of Hydroxyalkyl Vinyl Ethers and Dialkyl Maleates

The alternating copolymerization of hydroxyalkyl vinyl ethers and dialkyl maleates is investigated by conventional radical polymerization and reversible addition-fragmentation chain transfer polymerization(RAFT). The influence of comonomer structure, comonomer feeding ratios, and monomer concentrations on the copolymerization and the copolymer structure have been investigated systematically. With 2-hydroxyethyl vinyl ether(HEVE) and dimethyl maleates(DMM) as comonomers, a well-defined alternatin...     

The reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization of vinyl acetate mediated by xanthate

The reversible addition-fragmentation chain transfer(RAFT) miniemulsion polymerization of vinyl acetate(VAc) mediated by methyl(methoxycarbonothioyl) sulfanyl acetate(MMSA) was carried out.The results showed that polymerizations initiated by AIBN and KPS proceeded in a controlled way.The RAFT miniemulsion polymerization of VAc initiated by KPS showed the shorter inhibition period,higher propagation rate coefficient and final conversion than those in experiment initiated by AIBN.When the monomer conversio...     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Homopolymerization of N-pyrimidinyl acrylamide

Homopolymerization of N-pyrimidinyl acrylamide(NPA)was reported for the first time.The polymer(polyNPA)was soluble only in acidic media and fluoroalcohols,and only in fluoroalcohol was homogeneous polymerization of NPA feasible.~1H NMR analysis proved that a 1:1 H-bonding complex could be formed between NPA andα,α-bis(trifluoromethyl)phenyl propan-2-ol (BTMP).Cumyl dithiobenzoate mediated reversible addition-fragmentation chain transfer(RAFT)polymerization of NPA in BTMP was carried out.~1H NMR analyses proved that the molecular weight increased linearly with the monomer conversion.The polymer prepared in conventional solvents was atactic while in protic media the syndiotacticity was slightly enhanced.     

Molecularly Imprinted Polymers on Chloromethyl Polystyrene Resin Prepared via RAFT Polymerization

Surface molecularly imprinted polymers (SMIP) was prepared via the reversible addition-fragmentation chain transfer (RAFT) polymerization on the chloromethyl polystyrene resin (CPR) in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.     

Synthesis of a novel centipede-like copolymer of styrene and methyl methacrylate

A well-defined,A2B-type,centipede-like copolymer of styrene and methyl methacrylate(PS-PS-PMMA) was synthesized by the combination of living anionic polymerization and atom transfer radical polym-erization(ATRP) . The synthetic approach involves the coupling reaction of polystyrene(PS) backbone bearing 1,1-diphenylethene(DPE) pendant groups,produced by ATRP and Wittig reaction,with living polystyryllithium(PSLi) ,and subsequent polymerization of the resulting 1,1-diphenylmethyl anions with methy methacrylate. The centipede-like copolymer was characterized by 1H NMR,IR,SEC,SLS,and DSC measurements.     

Effect of Temperature-responsive Solution Behavior of PNIPAM-bPPEOMA-b-PNIPAM on Its Inclusion Complexation with α-Cyclodextrin

The effect of temperature-responsive solution behavior of PNIPAM-b-PPEOMA-b-PNIPAM on its inclusion complexation with α-cyclodextrin was studied. The triblock polymer was prepared by reversible addition-fragmentation chain transfer(RAFT) polymerization and formed inclusion complexes(ICs) after selective threading of the PEO segment of the triblock polymer through the cavities of α-CD units. For comparison, PPEOMA homopolymer was prepared and the inclusion complexation with α-CD was also studied. The ICs were prepared with α-CD when the polymer was in different conformations by changing the temperature, and the formed ICs were characterized by XRD, 1H-NMR, TGA and DSC. The solutions of the ICs show temperature-responsive clear/turbid transition or fluidic emulsion/gel transition depending on the concentration of the α-CD added, and the stoichiometry determined by 1H-NMR and TGA indicates that the stoichiometry of EO to α-CD of the resulted ICs increases with increasing of temperature.     

Synthesis of α-Bromine- Terminated Polystyrene Macroinitiator and Its Initiation of MMA Polymerization by ATRP

In the present paper the synthesis of block copolymers via the transformation from living anionic polymerization (LAP) to atom transfer radical polymerization (ATRP) was described. Α-Bromine-terminated polystyrenes(PStBr) in the LAP step was prepared by using n-BuLi as initiator, tetrahydrofuran (THF) as the activator, α-methylstyrene (α-MeSt) as the capping group and liquid bromine (Br2) as the bromating agent. The effects of reaction conditions such as the amounts of α-MeSt, THF, and Br2 as well as molecular weight of polystyrene on the bromating efficiency (BE) and coupling extent (CE) were examined. The present results show that the yield of PStBr obtained was more than 93.8% and the coupling reaction was substantially absent. PStBr was further used as the macroinitiator in the polymerization of methyl-methacrylate(MMA) in the presence of copper(Ⅰ) halogen and 2,2-bipyridine(bpy) complexes. It was found that the molecular weight of the resulted PSt-b-PMMA increased linearly with the increase of the conversion of MMA and the polydispersity was 1.2-1.6. The structures of PStBr and P(St-b-MMA) were characterized by 1H NMR spectra.     

SYNTHESIS OF AMPHIPHILIC COMB-SHAPED COPOLYMERS USED FOR SURFACE MODIFICATION OF PVDF MEMBRANES

The synthesis of a novel amphiphilic comb-shaped copolymer consisting of a main chain of styrene-(N-(4- hydroxyphenyl) maleimide)(SHMI) copolymer and poly(ethylene glycol) methyl ether methacrylate(PEGMA) side groups was achieved by atom transfer radical polymerization(ATRP).The amphiphilic copolymers were characterized by ~1H-NMR, Fourier transform infrared(FTIR) spectroscopy and gel permeation chromatography(GPC).From thermogravimetric analysis (TGA),the decomposition temperature of SHMI-g-PEGMA is low...     

Synthesis of polystyrene-styrene/butadiene diblock copolymers via reversible addition-fragmentation chain transfer miniemulsion polymerization

<正>Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ~1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.     

Synthesis of Well-Defined Dendritic-Linear Diblock and Triblock Copolymers by Controlled Free Radical Polymerization

Recently, significant progress has been made in the field of living free radical polymerization such as nitroxide-mediated stable free radical polymerization, atom transfer radical polymerization (ATRP), reverse ATRP and reversible addition-fragmentation chain transfer1. Among them, ATRP has been successfully applied to the synthesis of well-defined comb, gradient, star and dendritic macromolecules. Recent advances have been carried toward new initiators, metals and ligands. As a new cl…     

Evaluation of the clenbuterol imprinted monolithic column prepared by reversible addition-fragmentation chain transfer polymerization

To make more homogenous organic monolithic structure,reversible addition-fragmentation chain transfer(RAFT) process was employed in the synthesis of the clenbuterol imprinted polymer.In the synthesis,the influence of synthetic conditions on the polymer structure and separation efficiency was studied.The result demonstrated that the imprinted columns prepared with RAFT process have higher column efficiency and selectivity than the columns prepared with conventional polymerization in the present study,whic...     

A new method for synthesizing hyperbranched polymers with reductive groups using redox/RAFT/SCVP

The novel hyperbranced polymers containing reductive groups were successfully prepared and characterized using redox/reversible addition fragmentation chain transfer(RAFT)/self-condensing vinyl polymerization(SCVP) method. Several redox initiating chemicals such as Cu(III)/―CONH2, Ce(IV)/―CONH2 and Ce(IV)/―OH were chosen to increase the free radical generating rate, and the chain transfer agent(CTA) was used to reduce the molecular chain propagating rate, in order to obtain polymers with high degree of branching. Detailed analyses based on the molecular weight, ? value and the degree of branching of polymers(DB) obtained from 1H-NMR spectra and multi detector size exclusion chromatography(MDSEC) suggested the acquiring of hyperbranced polyacrylamides with Cu(III)/―CONH2 and Ce(IV)/―CONH2 as initiator in the presence of the CTA. Meanwhile, the as-prepared poly(N-hydroxymethyl acrylamide)(PNHAM) with higher DB value(0.48) proved that using Ce(IV)/―OH as the initiator could increase the free radical generating rate and diminish the gap between the propagating rate and the initiation rate during the reaction procedure. In addition, the effect of oxidant concentration on the Mark-Houwink index(?) value and the DB was also studied.     

Synthesis and Microphase Separation Behavior of Random,Mixed Cylindrical Brush Copolymers Bearing Polystyrene and Poly(ε-caprolactone) Side Chains

A series of mixed, random cylindrical brush copolymers bearing polystyrene(PS) and poly(ε-caprolactone)(PCL) side chains were synthesized via the combination of ring-opening polymerization(ROP) and atom transfer radical polymerization(ATRP). These novel cylindrical brush copolymers have been characterized by means of nuclear magnetic resonance(NMR) spectroscopy, gel permeation chromatography(GPC) and differential scanning calorimetry(DSC). It was found that the mikto-armed cylindrical brush copolymers were microphase-separated in bulks and that the morphologies were dependent on the mass ratios of PS to PCL side chains. One of the cylindrical brush copolymers was employed to incorporate into epoxy thermoset to investigate effect of the mikto-armed cylindrical brush architecture on the reaction-induced microphase separation behavior. Depending on the concentration of the cylindrical brush in epoxy, the thermosets can display the morphologies with the spherical, worm-like and lamellar PS microdomains dispersing in continuous thermosetting matrices.     

Molecularly Imprinted Polymers on Chloromethyl Polystyrene Resin Prepared v/a RAFT Polymerization

Surface molecularly imprinted polymers （SMIP） was prepared via the reversible addition-fragmentation chain transfer （RAFT） polymerization on the chloromethyl polystyrene resin （CPR） in the presence of the template D-phenylalanine. The structure of SMIP was characterized by FTIR and SEM. The adsorption behavior of D-phenylalanine of SMIP was preliminarily investigated.     

阻聚剂对MMA原子转移自由基聚合的影响

Effect of a series of inhibitors as additives on atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with FeCl2/PPh3 as catalyst system was studied, including 2,4,6-trinitrophenol (TNP), 4-methoxyphenol (4-MP), hydroquinone (HQ) and nitrobenzene (NB). It was found that TNP was the only. efficient additive for ATRP among these inhibitors. In the presence of small amounts of TNP, the polymerization proceeded rapidly after induction period to yield the polymers with controlled molecular weights and narrow molecular weight distributions (MWD). The initiating efficiency of the modified catalyst system with TNP was increased. The mechanism was proposed and confirmed by the end group analysis of the polymer.     

SYNTHESIS AND CHARACTERIZATION OF HYPERBRANCHED VINYL POLYMERS FROM RAFT POLYMERIZATION OF AN ASYMMETRIC DIVINYL MONOMER

Hyperbranched vinyl polymers were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of a styrenic asymmetric divinyl monomer.This was achieved by using cumyl dithiobenzoate or S-dodecyl-S′- (α,α′-dimethyl-α″-acetic acid)trithiocarbonate as the chain transfer agent,1,1′-azobis(cyclohexanecarbonitrile) or thermal initiation as a source of radicals.Cross-linking was inhibited by a rapid RAFT-based equilibrium between active propagation chains and dormant species,and thus a h...