Effects of plasticizer and nanofiller on the dielectric dispersion and relaxation behaviour of polymer blend based solid polymer electrolytes

Solid polymer electrolytes consisted of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) blend (50:50 wt/wt%) with lithium triflate (LiCF₃SO₃) as a dopant ionic salt at stoichiometric ratio [EO + (CO)]:Li⁺ = 9:1, poly(ethylene glycol) (PEG) as plasticizer (10 wt%) and montmorillonite (MMT) clay as nanofiller (3 wt%) have been prepared by solution cast followed by melt–pressing method. The X–ray diffraction study infers that the (PEO–PMMA)–LiCF₃SO₃ electrolyte is predominantly amorphous, but (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG electrolyte has some PEO crystalline cluster, whereas (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG–3 wt% MMT electrolyte is an amorphous with intercalated and exfoliated MMT structures. The complex dielectric function, ac electrical conductivity, electric modulus and impedance spectra of these electrolytes have been investigated over the frequency range 20 Hz to 1 MHz. These spectra have been analysed in terms of the contribution of electrode polarization phenomenon in the low frequency region and the dynamics of cations coordinated polymer chain segments in the high frequency region, and also their variation on the addition of PEG and MMT in the electrolytes. The temperature dependent dc ionic conductivity, dielectric relaxation time and dielectric strength of the plasticized nanocomposite electrolyte obey the Arrhenius behaviour. The mechanism of ions transportation and the dependence of ionic conductivity on the segmental motion of polymer chain, dielectric strength, and amorphicity of these electrolytes have been explored. The room temperature ionic conductivity values of the electrolytes are found ∼10⁻⁵ S cm⁻¹, confirming their use in preparation of all-solid-state ion conducting devices.     

Dielectric spectroscopy and confirmation of ion conduction mechanism in direct melt compounded hot-press polymer nanocomposite electrolytes

Solid-type polymer nanocomposite electrolyte (PNCE) comprising poly(ethylene oxide) (PEO), lithium perchlorate (LiClO₄) and montmorillonite (MMT) nano-platelets were synthesized by direct melt compounded hot-press technique at 70 °C under 3 tons of pressure. The spectra of complex dielectric function, electric modulus and alternating current (ac) electrical conductivity, and complex impedance plane plots of these materials were investigated in the frequency range 20 Hz to 1 MHz at ambient temperature. The variation of electrode polarization and ionic conduction relaxation times with MMT concentration up to 20 wt.% confirms their strong correlation with direct current ionic conductivity. The predominance of exfoliated MMT structures in PEO matrix and their effect on cation conduction mechanism and ion pairing were discussed by considering a supramolecular transient cross-linked structure. The normalized ac conductivity as a function of scaled frequency of these PNCE materials obey the universal time–concentration superposition behaviour alike the disordered solid ionic conductors.     

Structural and thermal studies of PVA:NH4I

Proton-conducting polymer electrolytes based on poly vinyl alcohol (PVA; 88% hydrolyzed) and ammonium iodide (NH₄I) has been prepared by solution casting method with different molar ratios of polymer and salt using DMSO as solvent. DMSO has been chosen as a solvent due its high dielectric constant and also its plasticizing nature. The ionic conductivity has been found to increase with increasing salt concentration up to 25 mol% beyond which the conductivity decreases and the highest ambient temperature conductivity has been found to be 2.5×10⁻³ S cm⁻¹. The conductivity enhancement with addition of NH₄I has been well correlated with the increase in amorphous nature of the films confirmed from XRD and differential scanning calorimetry (DSC) analyses. The temperature-dependent conductivity follows the Arrhenius relation. The polymer-proton interactions have been analyzed by FTIR spectroscopy.     

Dielectric Relaxations and Structures of Nanoclay in Solution Cast Poly(Ethylene Oxide)– Montmorillonite Clay Nanocomposites

The relative complex dielectric function, electric modulus and alternating current electrical conductivity spectra and complex impedance plane plots of aqueous solution cast poly(ethylene oxide)–montmorillonite clay (PEO–MMT) nanocomposite films were investigated over the frequency range 20 Hz to 1 MHz at ambient temperature. The intercalated and exfoliated structures of nanoclay dispersed in PEO matrix were recognized by the significant change in real part of dielectric function with clay concentration in the range 0%–20 wt%. The relaxation times corresponding to PEO chain segmental motion and ionic conduction relaxation processes were used to explore the interactions compatibility between PEO molecules and the dispersed MMT clay nanoplatelets and their effect on PEO chain dynamics. Real part of conductivity spectra of these nanocomposites over five decades of frequency has nonlinear behavior, which is influenced by the MMT clay concentration. The complex impedance plane plots confirm the bulk properties of these nanocomposites over the experimental frequency range.     

Effect of different anions of lithium salt and MMT nanofiller on ion conduction in melt-compounded PEO–LiX–MMT electrolytes

Polymer nanocomposite electrolyte (PNCE) films composed of poly(ethylene oxide) (PEO), lithium salt ( \textLiX;  \textX = ClO₄ ^- ,  BF₄ ^- ,  CF₃SO₃ ^- {\text{LiX}};\;{\text{X}} = ClO_4^{ - },\;BF_4^{ - },\;C{F_3}SO_3^{ - } ) and montmorillonite (MMT) clay as nanofiller were prepared by melt-compounded hot-pressed technique at 70 °C under 3 tons of pressure. The ionic conductivity and relaxation behaviour of the films were investigated by dielectric relaxation spectroscopy in the frequency range of 20 Hz to 1 MHz at ambient temperature. The results revealed that the ionic conductivity of the PNCE films having 20:1 stoichiometric ratio of ethylene oxide monomer units to the lithium cation are governed by the size of different anions and the dissociation constant of salt, and also MMT concentration. It was found that PEO–LiBF₄ film has comparative high dc ionic conductivity, whereas both the LiBF₄ and LiClO₄ containing PNCE films exhibit anomalous conductivity behaviour with varying MMT concentration. The PEO–LiCF₃SO₃ film has two orders of magnitude low value of dc ionic conductivity as compared to that of the other salts electrolyte films, but its conductivity enhances by one order of magnitude when 2 wt.% MMT is added as filler. A correlation between the values of ionic conductivity, conductivity relaxation time and the real part of permittivity at 1 MHz were found and the same was discussed in relation to the transient ion-dipolar type cross-linked structural behaviour of the polymeric nanocomposite electrolytes.     

Effect of melt compounding temperature on dielectric relaxation and ionic conduction in PEO–NaClO<Subscript>4</Subscript>–MMT nanocomposite electrolytes

Polymer nanocomposite electrolytes (PNCEs) of poly(ethylene oxide) and sodium perchlorate monohydrate complexes with montmorillonite (MMT) clay up to 20 wt.% MMT concentration of poly(ethylene oxide) (PEO) are synthesized by melt compounding technique at melting temperature of PEO (∼70 °C) and NaClO₄ monohydrate (∼140 °C). Complex dielectric function, electric modulus, alternating current (ac) electrical conductivity, and impedance properties of these PNCEs films are investigated in the frequency range 20 Hz to 1 MHz at ambient temperature. The direct current conductivity of these materials was determined by fitting the frequency-dependent ac conductivity spectra to the Jonscher power law. The PNCEs films synthesized at melting temperature of NaClO₄ monohydrate have conductivity values lower than that of synthesized at PEO melting temperature. The complex impedance plane plots of these PNCEs films have a semicircular arc in upper frequency region corresponding to the bulk material properties and are followed by a spike in the lower frequency range owing to the electrode polarization phenomena. Relaxation times of electrode polarization and ionic conduction relaxation processes are determined from the frequency values corresponding to peaks in loss tangent and electric modulus loss spectra, respectively. A correlation is observed between the ionic conductivity and dielectric relaxation processes in the investigated PNCEs materials of varying MMT clay concentration. The scaled ac conductivity spectra of these PNCEs materials also obey the ac universality law.     

Impedance and dielectric studies of nanocomposite polymer electrolyte systems using MMT and ferroelectric fillers

Impedance and dielectric properties of nanocomposite polymer electrolyte systems modified with nano size MMT and ferroelectric fillers have been investigated for varying lithium to oxygen ratios. The changes in the structural properties of the electrolyte samples were characterized by X-ray diffraction (XRD) and differential scanning calorimetric (DSC) technique. The ion transport number estimated by DC polarization technique is found to be between 0.86 and 0.95. The bulk conductivities of nanocomposite polymer electrolyte films were studied using impedance spectroscopic technique. The impedance plot shows high frequency semicircle, due to the bulk effect of sample and maximum ionic conductivity of 2.15 × 10⁻⁴ Scm⁻¹ was observed for (PEO)₄LiCBSM at 323 K with lithium to oxygen ratio 1: 4. The complex impedance data was used to evaluate ionic conductivity and dielectric relaxation process, to understand the ion transport mechanism in these systems.

     

Structure, thermal and transport properties of PVAc-LiClO4 solid polymer electrolytes

The lithium ion conducting solid polymer electrolytes (SPE) based on PVAc-LiClO₄ of various compositions were prepared by solution casting technique. Structure and surface morphology characterization were studied by X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) measurements, respectively. Thermal and conductivity behavior of polymer-salt complexes were studied by employing differential scanning calorimetry (DSC) and ac impedance measurements, respectively. XRD and SEM analyses indicate the amorphous nature of the polymer-salt complexes. DSC measurements show decrease in T_g with the increase in LiClO₄ concentrations. The bulk conductivity of the PVAc:LiClO₄ polymer electrolytes was found to vary between 7.6×10⁻⁷ and 6.2×10⁻⁵ S cm⁻¹ at 303 K with the increase in salt concentration. The temperature dependence of the polymer electrolyte complexes appear to obey Arrhenius law.     

The conductivity and dielectric studies of solid polymer electrolytes based on poly (acrylamide-co-acrylic acid) doped with sodium iodide

Solid polymer electrolyte thin films based on polyacrylamide-co-acrylic acid (PAAC) doped with sodium iodide (NaI) with different ratios of polymer and salt added with fixed amount of additive of propylene carbonate (PC) were prepared by using solution casting method. The PC was added to the mixture of the solution to provide more flexibility to the polymer film by increasing the plasticity of the thin film membrane. The conductivity and dielectric studies were carried out on these thin films to understand the ion transport properties of the polymer electrolytes. The highest conductivity obtained was 1.88?×?10^?5 S cm^?1 for the 30% NaI salt-doped polymer electrolyte system at room temperature. The temperature-dependent conductivity agrees with Arrhenius relationship which shows that hopping mechanism of ions in the polymer matrix. The dielectric properties especially the loss tangent used to analyze the segmental relaxation of the polymer chain as more concentration of salt was incorporated. The electric modulus was studied to understand the electrical relaxation processes to overcome electrode polarization effect.     

Experimental investigations on plasticized PMMA/PVA polymer blend electrolytes

Blend based polymer electrolytes composed of poly (methyl methacrylate) (PMMA), poly(vinylalcohol) (PVA) and LiClO₄ are prepared using solvent casting technique. The polymer films are characterized by XRD and FTIR studies to determine the molecular environment for the conducting ions. These polymer films have been investigated in terms of ionic conductivity using the results of impedance studies. The influence of the blend composition on the electrochemical behaviour is also discussed. The highest room temperature conductivity obtained for the film consisting of PMMA, PVA, LiClO₄ and DMP is 0.06×10⁻³ S/cm at 303 K. The PMMA-PVA blend based polymer electrolytes look very desirable and promising for lithium battery applications.     

Influence of lithium potassium zirconate nanoparticles on the electrical properties and structural characteristics of poly(vinyl alcohol) films

We investigated the influence of lithium potassium zirconate (LiKZrO₃) nanoparticles on the electrical properties and structural characteristics of poly(vinyl alcohol) (PVA) films. PVA/LiKZrO₃ nanocomposite films were prepared by casting of aqueous solutions with varying LiKZrO₃ content (0.5, 1.0, and 2.0 wt.%). The dielectric constant (ε′), dielectric loss (ε″), AC conductivity (σ_ac), dielectric loss tangent (tan δ), and electric modulus (M′ and M″) of the nanocomposite films were measured over a range of frequencies at ambient temperature. The results show increases in σ_ac and M′ with frequency, whereas ε′, ε″, and tan δ decreased with increasing frequency. The films were also characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) techniques. DSC and XRD revealed the nature of LiKZrO₃ nanoparticle interaction with the PVA matrix. TGA analysis revealed an increase in thermal stability of the nanocomposites with increasing nanoparticle concentration. Scanning electron microscopy confirmed uniform dispersion of LiKZrO₃ nanoparticles in the PVA matrix.     

Investigation of dibutyl phthalate as plasticizer on poly(methyl methacrylate)–lithium tetraborate based polymer electrolytes

Polymer electrolyte membranes, comprising of poly(methyl methacrylate) (PMMA), lithium tetraborate (Li₂B₄O₇) as salt and dibutyl phthalate (DBP) as plasticizer were prepared using a solution casting method. The incorporation of DBP enhanced the ionic conductivity of the polymer electrolyte. The polymer electrolyte containing 70 wt.% of poly(methyl methacrylate)–lithium tetraborate and 30 wt.% of DBP presents the highest ionic conductivity of 1.58 × 10⁻⁷ S/cm. The temperature dependence of ionic conductivity study showed that these polymer electrolytes obey Vogel–Tamman–Fulcher (VTF) type behaviour. Thermogravimetric analysis (TGA) was employed to analyse the thermal stability of the polymer electrolytes. Fourier transform infrared (FTIR) studies confirmed the complexation between poly(methyl methacrylate), lithium tetraborate and DBP.     

Dielectric and conductivity relaxations in PVAc based polymer electrolytes

The polymer electrolytes composed of a blend of poly (vinyl acetate) (PVAc) and poly (methylmethacrylate) (PMMA) as a host polymer and LiClO₄ as a salt are prepared by a solution casting technique. The formation of blend polymer- salt complex has been confirmed by FT-IR spectral studies. The conductivity- temperature plots are found to follow an Arrhenius nature. Arrhenius plot shows the decrease in activation energy with the increase in salt concentration. The dielectric behaviour of the sample is analysed using dielectric permittivity (ε′), dielectric loss (ε″) and electric modulus (M″) of the samples. The impedance cole- cole plot shows the high frequency semi- circle is due to the bulk effect of the material and the depression in the semicircle shows the non-Debye nature of the material. The bulk conductivity is found to vary between 2.5×10⁻⁵ Scm⁻¹ to 1.7×10⁻³ Scm⁻¹ with the increase of salt concentration of blend polymer samples. The migration energy derived from the dissipation factor is almost equal to the activation energy calculated from conductivity. The modulus spectrum of the samples shows the non-Debye behaviour of the polymer electrolyte films. The low frequency dispersion of the dielectric constant implies the space charge effects arising from the electrodes. Paper presented at the 2nd International Conference on Ionic Devices, Anna University, Chennai, India, Nov. 28–30, 2003.     

The role of zirconium oxide as nano-filler on the conductivity,morphology, and thermal stability of poly(methyl methacrylate)–poly(styrene-co-acrylonitrile)-based plasticized composite solid polymer electrolytes

The plasticized composite solid polymer electrolytes (CSPE) involving polymer blends poly(methyl methacrylate)-poly(styrene-co-acrylonitrile) (PMMA-SAN), plasticizers ethylene carbonate (EC), and propylene carbonate (PC) with lithium triflate (LiCF₃SO₃) as salt and varying concentration of composite nano-filler zirconium oxide (ZrO₂) is prepared by solution casting technique using THF as solvent. The powder X-ray diffraction (XRD) studies reveal amorphous nature of the CSPE samples. Fourier transform infrared (FT-IR) spectroscopy studies reveal interaction of Li⁺ ion with plasticizers, both C=O and OCH₃ group of the PMMA, while nitrile group of SAN is inert. AC impedance and dielectric studies reveal that the ionic conductivity (σ), dielectric constant (ε’), and dielectric loss (ε”) of the prepared CSPE samples increase with increasing content of ZrO₂ nano-filler up to 6 wt% and decrease with further additions. The temperature dependence of ionic conductivity follows Arrhenius relation and indicates ion-hopping mechanism. The sample Z2 (6 wt% ZrO₂) with relaxation time τ of 8.13?×?10^–7 s possess lowest activation energy (E_a?=?0.23 eV) and highest conductivity (2.32?×?10^–4 S cm^?1) at room temperature. Thermogravimetric analysis (TGA) reveals thermal stability of highest conducting sample Z2 up to 321 °C after complete removal of residual solvent, moisture, and its impurities. Differential scanning calorimetric (DSC) studies reveal absence of glass transition temperature (T_g) corresponding to atactic PMMA for the CSPE Z2, while isotactic PMMA component shows T_g around 70 °C, which is due to increased interaction of filler with PMMA leading to change in its tacticity. Scanning electron microscopy (SEM) analysis reveals blending of PMMA/SAN polymers and lithium triflate salt. The incorporation of nano-filler ZrO₂ leads to change in surface topology of polymer matrix. Rough surface of the CSPE Z2 leads to new pathway for ionic conduction leading to maximum ionic conductivity.     

An insight into the interactions between LiN(CF3SO2)2 - γBL/DMF — PMMA by FTIR spectroscopy

FTIR spectroscopic analysis has been carried out for liquid electrolytes containing lithium —(trifluormethanesulfonimide or imide) salt as the ion source, a binary solvent composed of γBL and DMF and gel electrolytes containing PMMA. These studies illustrate that for all electrolytes, the cation (Li⁺) — solvent interaction is predominant and occurs through the carbonyl oxygen and the electron rich nitrogen atom of the solvating medium i.e., the binary solvent. Ionic conductivity trends upon varying lithium imide concentration, exhibit a single maximum in both liquid and gel polymeric electrolytes. The conductivity at 25 °C (σ₂₅) decline at high salt concentrations attributable to ion aggregation or cation-anion association, has been explained on the basis of detailed spectral analysis. Addition of PMMA as a gelatinizing agent to liquid electrolytes does not affect the conduction mechanism drastically, which is evident from conductivity measurements and is supplemented by spectral studies.     

Electrical conduction and dielectric properties of vanadium phosphate glasses doped with lithium

AC conductivity and dielectric studies on vanadium phosphate glasses doped with lithium have been carried out in the frequency range 0.2-100 kHz and temperature range 290-493 K. The frequency dependence of the conductivity at higher frequencies in glasses obeys a power relationship, σ_ac=Aω^s. The obtained values of the power s lie in the range 0.5≤s≤1 for both undoped and doped with low lithium content which confirms the electron hopping between V⁴⁺ and V⁵⁺ ions. For doped glasses with high lithium content, the values of s≤0.5 which confirm the domination of ionic conductivity. The study of frequency dependence of both dielectric constant and dielectric loss showed a decrease with increasing frequency while they increase with increasing temperature. The results have been explained on the basis of frequency assistance of electron hopping besides the ionic polarization of the glasses. The bulk conductivity increases with increasing temperature whereas decreases with increasing lithium content which means a reduction of the V⁵⁺.     

Influence of sintering conditions and doping on the dielectric relaxation originating from the surface layer effects in CaCu3Ti4O12 ceramics

Detailed investigations into the dielectric dispersion phenomenon in the giant dielectric constant material CaCu₃Ti₄O₁₂ (CCTO) around room temperature revealed the existence of two successive dielectric relaxations. In the temperature domain, a new dielectric relaxation was clearly observed around 250 K, in addition to the well-investigated dielectric relaxation close to 100 K. The effect of sintering and doping (La³⁺) on the strength of these dielectric relaxations were studied in detail. The sintering temperature as well as its duration was found to have tremendous influence on the dielectric relaxation that was encountered around 250 K. This Maxwell-Wagner (M-W) type of relaxation was found to be originating from the surface layer containing the Cu-rich phase, which was ascribed to the difference in the oxygen content between the surface and the interior of the sample. Interestingly, this particular additional relaxation was not observed in La_2/3Cu₃Ti₄O₁₂, a low dielectric constant member of the CCTO family, in which the segregation of Cu-rich phase on the surface was absent. Indeed the correlation between the new relaxation and the presence of Cu-rich phase in CCTO ceramics was further corroborated by the absence of the same after removing the top and bottom layers.     

Structural, vibrational and electrical characterization of PVA-NH4Br polymer electrolyte system

Polymer electrolyte based on PVA doped with different concentrations of NH₄Br has been prepared by solution casting technique. The complexation of the prepared polymer electrolytes has been studied using X-ray diffraction (XRD) and Fourier transform infra red (FTIR) spectroscopy. The maximum ionic conductivity (5.7×10⁻⁴ S cm⁻¹) has been obtained for 25 mol% NH₄Br-doped PVA polymer electrolyte. The temperature dependence of ionic conductivity of the prepared polymer electrolytes obeys Arrhenius law. The ionic transference number of mobile ions has been estimated by dc polarization method and the results reveal that the conducting species are predominantly ions. The dielectric behavior of the polymer electrolytes has been analyzed using dielectric permittivity and electric modulus spectra.     

Dielectric relaxation and a.c. conduction phenomena of PbO-PbF2-B2O3 glasses doped with FeO

PbO-PbF₂-B₂O₃ glasses containing different concentrations of FeO have been prepared. The glasses are characterized by X-ray diffraction and differential thermal analysis. The dielectric properties viz., dielectric constant, loss, conductivity, over a moderately wide range of frequency and temperature and dielectric breakdown strength have been investigated. The results of these studies have been analyzed in the light of different oxidation states of iron with the aid of the data on IR, ESR, optical absorption and magnetic susceptibility measurements. The analysis shows that iron ions exist mainly in Fe³⁺ state, occupy tetrahedral positions and increase the insulating strength of the glass if FeO is present in smaller concentrations. However, if FeO is present in higher concentrations in the glass matrix, (i) the dielectric relaxation intensity has been observed to increase, (ii) the intensity and the half width of the ESR signal has been observed to decrease and (iii) the value of magnetic moment (evaluated from magnetic susceptibility) has been observed to drop to a value of 4.6 μ_B from 5.7 μ_B. From these results it has been concluded that in this concentration range, iron ions exist mainly in divalent state.     

Conductivity studies of plasticized PEO–HPF6–fumed silica nanocomposite polymer electrolyte system

The effect of the addition of propylene carbonate (PC) on the ion transport behaviour of nanocomposite polymer electrolytes having composition of polyethylene oxide?Chexafluorophosphoric acid?Cfumed silica has been studied. The ionic conductivity of 6.89?×?10^?4 S cm^?1 at 298?K has been obtained for these electrolytes along with good mechanical and thermal properties. The variation of ¹H NMR linewidth with temperature shows line narrowing at the glass transition and melting temperature of the electrolytes which suggests the onset of long-range ion translational motion. The increase in ionic conductivity with the addition of PC is related to the transformation of these electrolytes to the amorphous phase which has been supported by X-ray diffraction results. The polymer electrolytes are thermally stable up to around 498?K and hence are suitable for various applications.