Ion implantation inducing nanovoids characterized by TEM and STEM

The evolution of nanoparticles in sequentially ion-implanted Ag and Ag/Cu into silica glasses has been studied. The doses for implantation (×10¹⁶ ions/cm²) were 5Ag, 5Ag/5Cu and 5Ag/15Cu. Ag nanoclusters have been formed in the implanted 5Ag specimen. In the implanted 5Ag/5Cu specimen, some formed nanoclusters have brighter center features. With an increase of Cu ions dose, the nanoclusters with brighter center features become prevalent. The microstructural properties of the nanoparticles are characterized by transmission electron microscopy. Scanning transmission electron microscope high-angle annular dark field and high-resolution transmission electron microscopy are also utilized to study the formed nanoparticles. The results show that nanovoids have been induced into metal nanoparticles during the ion implanting process, not the core-shell nanoparticles as other workers believed. The nanovoids can be the aggregation of vacancies induced by irradiation.     

Controllable Formation of Niobium Nitride/Nitrogen‐Doped Graphene Nanocomposites as Anode Materials for Lithium‐Ion Capacitors

Niobium nitride/nitrogen‐doped graphene nanosheet hybrid materials are prepared by a simple hydrothermal method combined with ammonia annealing and their electrochemical performance is reported. It is found by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) that the as‐obtained niobium nitride nanoparticles are about 10–15 nm in size and homogeneously anchored on graphene. A non‐aqueous lithium‐ion capacitor is fabricated with an optimized mass loading of activated carbon cathode and the niobium nitride/nitrogen‐doped graphene nanosheet anode, which delivers high energy densities of 122.7–98.4 W h kg^?1 at power densities of 100–2000 W kg^?1, respectively. The capacity retention is 81.7% after 1000 cycles at a current density of 500 mA g^?1. The high energy and power of this hybrid capacitor bridges the gap between conventional high specific energy lithium‐ion batteries and high specific power electrochemical capacitors, which holds great potential applications in energy storage for hybrid electric vehicles.     

ZnO nanoparticles anchored on nitrogen and sulfur co-doped graphene sheets for lithium-ion batteries applications

Herein, we demonstrate a facile one-step hydrothermal synthesis route to anchor ZnO nanoparticles on nitrogen and sulfur co-doped graphene sheets. The detailed material and electrochemical characterization have been carried out to demonstrate the potential of novel ZnO/NSG nanocomposite in Li-ion battery (LIBs) applications. The structure and morphology of nanocomposite were assessed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The as-synthesized ZnO/NSG nanocomposite has been studied as anode material in LIBs and delivered a high initial discharge capacity of 1723 mAh g^?1, at the current density of 200 mA g^?1. After 100 cycles, the ZnO/NSG nanocomposites demonstrated a high reversible capacity of 720 mAh g^?1 and coulombic efficiency of 99.8%, which can be attributed to the porous three-dimensional network, constructed by ZnO nanoparticles and nitrogen and sulfur co-doped graphene. Moreover, the designed nanocomposite has shown excellent rate capability and lower charge transfer resistance. These results are promising and encourage further research in the area of ZnO-based anodes for next-generation LIBs.     

N-doped graphene/Bi nanocomposite with excellent electrochemical properties for lithium–ion batteries

N-doped graphene/Bi nanocomposite was prepared via a two-step method, combining the gas/liquid interface reaction with the rapid heat treatment method. The as-prepared sample was characterized by X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS), and elemental analyzer. The XRD, FESEM, XPS, and elemental analysis results confirm the successful synthesis of N-doped graphene/Bi nanocomposite. As a result, the prepared N-doped graphene/Bi nanocomposite as an anode material for lithium-ion batteries delivers excellent electrochemical performance. A high lithium storage capacity of about 522 mAh g^?1 in the voltage range of 0.01–3.5 V is obtained. After 50 cycles at different current densities from 50 to 1000 mA g^?1, the specific capacity can still remain 386 mAh g^?1. Even at the high current density of 1000 mA g^?1, the N-doped graphene/Bi nanocomposite can still deliver a specific capacity of 218 mAh g^?1. The excellent electrochemical performance of the N-doped graphene/Bi nanocomposite is supposed to benefit from the high electronic conductivity of nitrogen-doped graphene and the synergistic effect of bismuth nanoparticles and nitrogen-doped graphene.     

Green synthesis of silver-graphene nanocomposite-based transparent conducting film

In the present work, silver nanoparticles (Ag NPs)/graphene nanocomposite has been synthesized successfully by simple solvothermal method via green route. Citric acid is used as green reducing agent for the reduction of graphene oxide (GO) and Ag ions. Silver nitrate is used as a precursor material for Ag NPs. As synthesized Ag NPs/graphene nanocomposite has been characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infra-red spectroscopy, UV–vis spectroscopy, thermal gravimetric analysis, field emission scanning electron microscopy, and X-ray photoelectron spectroscopy. Experimental results confirm the reduction of GO and the successful formation of Ag NPs decorated graphene nanosheets. In addition, spray coating technique is employed for the fabrication of transparent conducting films. Enhancement in the optoelectrical signatures has been achieved using thermal graphitization of fabricated films. Thermal graphitization at 800 °C for 1 h marks the best performance of fabricated film with sheet resistance of ~3.4 kΩ/□ and transmittance (550 nm) of ~66.40%, respectively.     

Preparation of Co3O4 nanoplate/graphene sheet composites and their synergistic electrochemical performance

Co₃O₄ nanoplate/graphene sheet composites were prepared through a two-step synthetic method. The composite material as prepared was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The platelet-like morphology of Co₃O₄ leads to a layer-by-layer-assembled structure of the composites and a good dispersion of Co₃O₄ nanoplates on the surface of graphene sheets. The electrochemical characteristics indicate that the specific capacitance of the composites is 337.8 F?g^?1 in comparison with the specific capacitance of 204.4 F?g^?1 without graphene sheets. Meanwhile, the composites have an excellent rate capability and cycle performance. The results show that the unique microstructure of the composites enhances the electrochemical capacitive performance of Co₃O₄ nanoplates due to the three-dimensional network of graphene sheets for electron transport increasing electric conductivity of the electrode and providing unobstructed pathways for ionic transport during the electrochemical reaction.     

Electrochemical synthesis of Ag nanoparticles supported on glassy carbon electrode by means of p-isopropyl calix[6]arene matrix and its application for electrocatalytic reduction of H2O2

The silver nanoparticles were prepared on the glassy carbon (GC) electrode, modified with p-iso propyl calix[6]arene, by preconcentration of silver ions in open circuit potential and followed by electrochemical reduction of silver ions. The stepwise fabrication process of Ag nanoparticles was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. The prepared Ag nanoparticles were deposited with an average size of 70 nm and a homogeneous distribution on the surface of electrode. The observed results indicated that the presence of calixarene layer on the electrode surface can control the particle size and prevent the agglomeratione and electrochemical deposition is a promising technique for preparation of nanoparticles due to its easy-to-use procedure and low cost of implementation. Cyclic voltammetry experiments showed that Ag nanoparticles had a good catalytic ability for the reduction of hydrogen peroxide (H₂O₂). The effects of p-isopropyl calix[6]arene concentration, applied potential for reduction of Ag⁺, number of calixarene layers and pH value on the electrocatalytic ability of Ag nanoparticles were investigated. The present modified electrode exhibited a linear range from 5.0 × 10⁻⁵ to 6.5 × 10⁻³ M and a detection limit 2.7 × 10⁻⁵ M of H₂O₂ (S/N = 3) using amperometric method.     

The mechanism of metal nanoparticle formation in plants: limits on accumulation

Metal nanoparticles have many potential technological applications. Biological routes to the synthesis of these particles have been proposed including production by vascular plants, known as phytoextraction. While many studies have looked at metal uptake by plants, particularly with regard to phytoremediation and hyperaccumulation, few have distinguished between metal deposition and metal salt accumulation. This work describes the uptake of AgNO₃, Na₃Ag(S₂O₃)₂, and Ag(NH₃)₂NO₃ solutions by hydroponically grown Brassica juncea and the quantitative measurement of the conversion of these salts to silver metal nanoparticles. Using X-ray absorption near edge spectroscopy (XANES) to determine the metal speciation within the plants, combined with atomic absorption spectroscopy (AAS) for total Ag, the quantity of reduction of Ag^I to Ag⁰ is reported. Transmission electron microscopy (TEM) showed Ag particles of 2–35 nm. The factors controlling the amount of silver accumulated are revealed. It is found that there is a limit on the amount of metal nanoparticles that may be deposited, of about 0.35 wt.% Ag on a dry plant basis, and that higher levels of silver are obtained only by the concentration of metal salts within the plant, not by deposition of metal. The limit on metal nanoparticle accumulation, across a range of metals, is proposed to be controlled by the total reducing capacity of the plant for the reduction potential of the metal species and limited to reactions occurring at an electrochemical potential greater than 0 V (verses the standard hydrogen electrode).     

Synthesis of graphene oxide sheets decorated by silver nanoparticles in organic phase and their catalytic activity

The graphene oxide(GO) sheets decorated by Ag nanoparticles were prepared using a liquid–liquid two-phase method at the room temperature. The synthesized samples existed in the organic phase and were characterized by X-ray diffraction, transmission electron microscopy, UV–vis spectroscopy and Raman spectra. The results demonstrate that these silver-nanoparticles with diameter of about 10 nm assembled on graphene oxide sheets are flexible and can form stable suspensions in organic phase. Raman signals of graphene oxide sheets are increased by the attached silver nanoparticles, displaying higher surface-enhanced Raman scattering activity. Furthermore, Ag/GO are found to serve as effective catalysts to activate the reduction of 4-nitrophenol (4NP) in the presence of NaBH₄.     

Sn and SnO2-graphene composites as anode materials for lithium-ion batteries

Sn and SnO₂-graphene composites were synthesized using hydrothermal process, followed by annealing in Ar/H₂ atmosphere, and characterized using x-ray diffraction, scanning electron microscopy, and transition electron microscopy. The results indicated that the polycrystalline metallic Sn forms nanospheres with a diameter of 100?～?300 nm, while the SnO₂ nanoparticles are much smaller with a size below 15 nm, which adsorb tightly on the surface of graphene sheets. The Sn and SnO₂-gaphene composites showed good electrochemical performance. After 55 charging/discharging cycles, the capacity remains above 440 mAh/g at a cycling rate of 400 mA/g and the coulombic efficiency is 99.1 %. The good electrochemical properties of the composites are partially contributed to the graphene component with good mechanical flexibility and electrical conductivity, which is an excellent carbon matrix for dispersing the Sn and SnO₂ nanostructures and provides the electron transport pathways as well.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.     

退火法制备石墨烯-银纳米粒子及其增强拉曼实验

针对目前SERS基底上金属颗粒制备过程中存在的分布不均匀、易氧化和稳定性差等缺点,通过热蒸镀和高温退火获得分布均匀的SERS基底;同时结合石墨烯优良的光学性能、化学惰性、荧光猝灭以及本身的SERS增强等优点,制备了稳定的石墨烯-银纳米颗粒（GE/AgNPs）复合结构SERS基底。通过GE/AgNPs复合结构的拉曼光谱稳定性试验证明了石墨烯在GE/AgNPs结构中起到隔绝银纳米颗粒与空气直接接触及催化氧化银脱氧的作用,有利于SERS基底的时间稳定性。(1) 石墨烯、Ag纳米颗粒及其复合结构的制备。首先采用热蒸镀和高温退火的方法使Ag纳米颗粒均匀地沉积在SiO₂/Si基底上,再采用化学气相沉积法在Cu箔上制备少层石墨烯,并用湿法转移法将石墨烯转移到目标基底上,并实验研究了以不同的退火顺序对GE/AgNPs基底造成的影响。(2) 石墨烯、Ag纳米颗粒及其复合基底的表征。分别采用光学显微镜、扫描电子显微镜和拉曼光谱进行表征,得到转移后的纯石墨烯较完整地覆盖在SiO₂/Si基底上面,表面比较平整,但在少数地方仍然存在褶皱和杂质;SEM表征结果表明对于不同制备流程的GE/AgNPs复合结构上的Ag纳米颗粒基本呈球形。基本符合Ostwald熟化理论,通过对退火温度和时间的控制能获得平均粒径在40~60 nm的银颗粒,且分布较均匀。此外,在不同退火顺序中,石墨烯的加入对银纳米颗粒的扩散形成扩散势垒,从而出现较大的不规则的颗粒。(3) 基底稳定性试验和仿真分析。通过基底本身的Raman mapping测试,分析了石墨烯拉曼特征峰峰值和半高宽的变化,得知基底对石墨烯本身的拉曼增强效果主要来源于银纳米颗粒间的电磁场增强。同时采用浓度为10-6 mol·L-1的罗丹明6G (R6G)水溶液作为探针分子,对转移了石墨烯的GE/AgNPs复合基底和未转移石墨烯的Ag纳米颗粒基底进行了SERS稳定性实验。结果表明GE/AgNPs复合基底在1~33 d内衰减较缓慢,30 d后仍能探测到拉曼信号约为原来信号的35.1%~40.6%;而纯Ag基底上随着Ag纳米颗粒在空气中迅速氧化,基底的SERS性能显著下降,在30 d后只有原来信号的5.9%~11.3%。此外,通过实验得到覆盖了石墨烯之后的增强因子约为6.05×105。最后采用时域有限差分算法（FDTD）计算了复合结构的电磁场分布和理论增强因子,其理论增强因子可以达到5.7×105。实验和仿真结果的差异,主要是源于石墨烯的化学增强作用。     

Preparation and electrochemical properties of LiFePO<Subscript>4</Subscript>/graphene composites from tailoring graphene oxides

LiFePO₄/graphene composites have been prepared by using tailoring graphene oxide (GO) nanosheets as precursors. The structure and electrochemical properties of the composites were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman microscopy, and a variety of electrochemical testing techniques. The decrease in graphene size reduces the contact resistance between activated materials, and enhances the lithium-ion transport in LiFePO₄/graphene composites. With low weight fractions of small-size graphene sheets, the composites show better electrochemical performance than those with large size graphene sheets.     

Silver-coated LiVPO4F composite with improved electrochemical performance as cathode material for lithium-ion batteries

Nano-structured LiVPO₄F/Ag composite cathode material has been successfully synthesized via a sol–gel route. The structural and physical properties, as well as the electrochemical performance of the material are compared with those of the pristine LiVPO₄F. X-ray diffraction (XRD) and scanning electron microscopy (SEM) reveal that Ag particles are uniformly dispersed on the surface of LiVPO₄F without destroying the crystal structure of the bulk material. An analysis of the electrochemical measurements show that the Ag-modified LiVPO₄F material exhibits high discharge capacity, good cycle performance (108.5 mAh g⁻¹ after 50th cycles at 0.1 C, 93% of initial discharge capacity) and excellent rate behavior (81.8 mAh g⁻¹ for initial discharge capacity at 5 C). The electrochemical impedance spectroscopy (EIS) results reveal that the adding of Ag decreases the charge-transfer resistance (R_ct) of LiVPO₄F cathode. This study demonstrates that Ag-coating is a promising way to improve the electrochemical performance of the pristine LiVPO₄F for lithium-ion batteries cathode material.     

Silver-coated graphene electrode produced by electrolytic deposition for electrochemical behaviors

This study evaluates the excellent electrochemical performance of silver (Ag)-coated graphene electrode using an electrolytic deposition technique. Ag particles are introduced to the graphene surface as a function of the applied current. A half cell of the Ag-coated graphene electrode is fabricated to examine the electrochemical performance, such as the charge–discharge behaviors, cyclic voltammetry, and specific capacitance. As a result, the electrochemical performance of the Ag-coated graphene electrode is two times higher than that of the crude graphene electrode.     

Synthesis of N-doped graphene/SnS composite and its electrochemical properties for lithium ion batteries

N-doped graphene/SnS composite as high-performance anode materials has been synthesized by a simultaneous solvothermal method using ethylene glycol as solvent. The morphology, structure, and electrochemical performance of N-doped graphene/SnS composite were investigated by transmission electron microscope (TEM), X-ray diffraction (XRD), Raman spectra, Fourier transform infrared (FTIR) spectra, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. The SnS nanoparticles with sizes of 3–5 nm uniformly distribute on the N-doped graphene matrix. The N-doped graphene/SnS composite exhibits a relatively high reversible capacity and good cycling stability as anode materials for lithium ion batteries. The good electrochemical performance can be due to that the N-doped graphene as electron conductor improves the electronic conductivity of composite and elastic matrix accommodates the large volume changes of SnS during the cycles.     

Plasmon enhanced CdS-quantum dot sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

CdS-quantum dot sensitized solar cell using ZnO nanorods (ZnO NRs) array deposited with Ag nanoparticles (Ag NPs) as photoanode was fabricated. Light absorption effect of Ag NPs on improvement of the cell performance was investigated. Performance improvement of metal nanoparticles (MNPs) was controlled by the structure design and architecture. Different decorations and densities of Ag NPs were utilized on the photoanode. Results showed that using 5% Ag NPs in the photoanode results in the increased efficiency, fill factor, and circuit current density from 0.28% to 0.60%, 0.22 to 0.29, and 2.18 mA/cm² to 3.25 mA/cm², respectively. Also, incident photon-to-current efficiencies (IPCE) results showed that cell performance improvement is related to enhanced absorption in the photoanode, which is because of the surface plasmonic resonance and light scattering of Ag NPs in the photoanode. Measurements of electrochemical impedance spectroscopy revealed that hole transfer kinetics increases with introduction of Ag NPs into photoanode. Also, it is shown that chemical capacitance increases with introduction of Ag NPs. Such increase can be attributed to the surface palsmonic resonance of Ag NPs which leads to absorption of more light in the photoanode and generation of more photoelectron in the photoanode.     

Decorating graphene sheets with Pt nanoparticles using sodium citrate as reductant

In this paper, we proposed a novel and green approach for the synthesis of graphene nanosheets (GNS) and Pt nanoparticles-graphene nanosheets (Pt/GNS) hybrid materials, employing graphene oxide (GO) as precursor and sodium citrate as environmentally friendly reducing and stabilizing agent. The microstructures of GO and Pt/GNS were characterized by high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), Raman spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD) and electrochemical measurements. The results confirmed that the uniform size distribution of Pt nanoparticles on the surface of GNS without agglomerates could be easily obtained via using sodium citrate as reductant, moreover the Pt/GNS hybrids exhibited high electrochemical activity.     

Encapsulation of SnO2/Sn Nanoparticles into Mesoporous Carbon Nanowires and its Excellent Lithium Storage Properties

A peculiar nanostructure of encapsulation of SnO₂/Sn nanoparticles into mesoporous carbon nanowires (CNWs) has been successfully fabricated by a facile strategy and confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high‐resolution TEM (HRTEM), X‐ray diffraction (XRD), BET, energy‐dispersive X‐ray (EDX) spectrometer, and X‐ray photoelectron spectroscopy (XPS) characterizations. The 1D mesoporous CNWs effectively accommodate the strain of volume change, prevent the aggregation and pulverization of nanostructured SnO₂/Sn, and facilitate electron and ion transport throughout the electrode. Moreover, the void space surrounding SnO₂/Sn nanoparticles also provides buffer spaces for the volumetric change of SnO₂/Sn during cycling, thus resulting in excellent cycling performance as potential anode materials for lithium‐ion batteries. Even after 499 cycles, a reversible capacity of 949.4 mAh g^?1 is retained at 800 mA g^?1. Its unique architecture should be responsible for the superior electrochemical performance.     

Green synthesis of silver nanoparticle-decorated porous reduced graphene oxide for antibacterial non-enzymatic glucose sensors

A simple and environmentally friendly approach was developed to fabricate silver nanoparticle (Ag NP)-decorated porous reduced graphene oxide (grGO) using glucose as a crosslinking and reducing agent. Physicochemical analysis, such as X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission-scanning electron microscopy (FE-SEM) were used to confirm the structural, morphological characteristics of the as-prepared samples. The electrocatalytic activity of Ag/grGO towards glucose oxidation was examined by cyclic voltammetry and amperometry. The fabricated sensor showed excellent sensitivity of 725.0 μA cm^?2 mM^?1 with a rapid response time of 11 s. Furthermore, the hybrids showed significant antibacterial activity against Escherichia coli with 99.76% antibacterial efficiency after 18 h.