Synthesis and luminescence properties of needle-like SrAl2O4:Eu, Dy phosphor via a hydrothermal co-precipitation method

Needle-like SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had been prepared by calcining the precursors obtained from hydrothermal process at the temperature of 1100 °C in a weak reductive atmosphere of active carbon. The crystal structure, morphology and optical properties of the composites were characterized. X-ray diffraction (XRD) patterns illustrated that the single-phase SrAl₂O₄ was formed at 1100 °C, which is much lower than that prepared by the traditional method. The transmission electron microscope (TEM) observation revealed the precursors and the resulted SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors had well-dispersed distribution and needle-like morphology with an average diameter about 150 nm at the center and the length up to 1 μm. After irradiation by ultraviolet radiation with 350 nm for 5 min, the phosphors emit green color long-lasting phosphorescence corresponding to the typical emission of Eu²⁺ ion, both the PL spectra and luminance decay revealed that the phosphors had efficient luminescent and long lasting properties.     

Synthesis and photoluminescence properties of NaPbB5O9:Dy phosphor materials for white light applications

Given the recent increased interest in phosphor materials and their applications, we analyzed a new NaPbB₅O₉:Dy³⁺ phosphor material with different concentrations of Dy³⁺. In particular, we investigated the crystal structure, morphology, and luminescence properties of these materials. X-ray diffraction analyses confirmed the formation of NaPbB₅O₉:Dy³⁺ phosphor powder. The functional groups present in the phosphor materials were examined by Fourier transform infrared spectroscopy. Scanning electron microscope images showed that the size of the grains was in the micrometer range. Photoluminescence spectra were recorded at different excitation wavelengths for the phosphor materials and we analyzed the variation in the intensity of the emission bands with different concentrations of Dy³⁺ ions. The color co-ordinates were calculated and used to characterize the color of the phosphor. We found that the emission colors of the Dy³⁺-doped NaPbB₅O₉ powders depended on the Dy³⁺ ion doping concentration and the excitation wavelength.     

Photoluminescence properties of BaMgAl10O17:Eu phosphor prepared by the flux method

BaMgAl₁₀O₁₇:Eu²⁺ phosphors were synthesized by the flux method. When the appropriate amounts of fluxes are added, the synthesis temperature reduced by at least 200 °C compared with the conventional solid-state reaction method. SEM images demonstrated that addition of the flux in the process of phosphor synthesis benefitted the size and morphology of BaMgAl₁₀O₁₇:Eu²⁺ phosphor particles. Photoluminescence measurements under VUV excitation indicated that the luminescent intensity of the phosphor enhanced by adding the flux system (BaF₂+Li₂CO₃). Addition of the flux system can not only enhance the luminescence efficiency and improve the stability, but also control the morphology and grain size of the phosphor. Replacement of Ba²⁺ by Li⁺ could generate traps, which result in slightly longer decay time.     

White-light long-lasting phosphorescence from Tb-activated Y2O2S phosphor

The white-light long-lasting phosphors Y₂O₂S:Tb³⁺, Sr²⁺ or/and Zr⁴⁺ were prepared and studied. The white-light afterglow emission after the irradiation with 254 nm UV are composed of the blue light emission and the yellowish-green light emission, originating from the transitions of ⁵D₃→⁷F₅, ⁵D₄→⁷F₅ in Tb³⁺ when the Tb³⁺ concentration is not higher than 0.3 at%. The codoped Sr²⁺ and Zr⁴⁺ ions act as trap-creating ions. The afterglow can last over 21 min in the dark for Y₂O₂S:Tb³⁺0.3%, Sr²⁺4%, Zr⁴⁺4% after irradiation by 254 nm ultraviolet light. Y₂O₂S:Tb³⁺ may be a promising material for the development of white-light long-lasting phosphor since the Tb³⁺ has a high luminescent efficiency and the dominant excitation band of 4f →5d is located at 220-300 nm.     

Temperature Raman scattering study of CaAl0.5Ta0.5O3 perovskite crystal

Temperature Raman scattering studies were performed for CaAl_0.5Ta_0.5O₃ crystal. This material features NaCl-type ordering of Al³⁺ and Ta⁵⁺ ions at the B-site superimposed onto b⁻b⁻c⁺ octahedral tilting. Because of the existing twin-related domains in crystal structure, the micro-Raman measurements were carried out at room temperature. Some differences in Raman spectra obtained using macro- and micro-Raman system were revealed. Most of the Raman modes show monotonous red-shift with the increase in temperature. Only the cubic-like fully symmetric A_1g mode slightly increases its frequency with an increase in temperature. There are no uncontinuous changes of mode frequency in the temperature range studied. It indicates the stable character of static distortions of crystal structure relying on changes of octahedra tilt angle.     

Synthesis process and the luminescence properties of rare earth doped NaLa(WO4)2 nanoparticles

Rare earth doped NaLa(WO₄)₂ nanoparticles have been prepared by a simply hydrothermal synthesis procedure. The X-ray diffraction (XRD) pattern shows that the Eu³⁺-doped NaLa(WO₄)₂ nanoparticles with an average size of 10-30 nm can be obtained via hydrothermal treatment for different time at 180 °C. The luminescence intensity of Eu³⁺-doped NaLa(WO₄)₂ nanoparticles depended on the size of the nanoparticles. The bright upconversion luminescence of the 2 mol% Er³⁺ and 20 mol% Yb³⁺ codoped NaLa(WO₄)₂ nanoparticles under 980 nm excitation could also be observed. The Yb³⁺-Er³⁺ codoped NaLa(WO₄)₂ nanoparticles prepared by the hydrothermal treatment at 180 °C and then heated at 600 °C shows a 20 times stronger upconversion luminescence than those prepared by hydrothermal treatment at 180 °C or by hydrothermal treatment at 180 °C and then heated at 400 °C.     

A novel blue-emitting long-lasting proyphosphate phosphor Sr2P2O7:Eu,Y

By introducing the Y³⁺ into Sr₂P₂O₇:Eu²⁺, we successfully prepared a kind of new phosphor with blue long-lasting phosphorescence by the high-temperature solid-state reaction method. In this paper, the properties of Sr₂P₂O₇:Eu²⁺,Y³⁺ were investigated utilizing XRD, photoluminescence, luminescence decay, long-lasting phosphorescence and thermoluminescence (TL) spectra. The phosphor emitted blue light that was related to the 4f⁶5d¹-⁸S_7/2 transition of Eu²⁺. The bright blue phosphorescence could be observed by naked eyes even 8 h after the excitation source was removed. Two TL peaks at 317 and 378 K related to two types of defects appeared in the TL spectrum. By analyzing the TL curve the depths of traps were calculated to be 0.61 and 0.66 eV. Also, the mechanism of LLP was discussed in this report.     

Porous LiNi0.75Co0.25O2 microspheres prepared via a hydrothermal process as cathode material for lithium ion batteries

Porous LiNi_0.75Co_0.25O₂ microspheres are successfully prepared by a simple hydrothermal process by using H[Ni_0.75Co_0.25OOH]₃ and LiOH as starting materials in the presence of urea for the first time. The synthesized samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), specific surface area (S_BET), and electrochemical performance. The synthesized LiNi_0.75Co_0.25O₂ has a good electrochemical performance with an initial discharge capacity of 169.3 mA g⁻¹ and good capacity retention of 96.7% after 50 cycles at 0.2 C (25 mA g⁻¹). The electrochemical lithium ion insertion/extraction process is quite reversible even at 5 C. Furthermore, the structure in the charge-discharge process is stable and the impedance increased slowly during cycling.     

Magnetic susceptibility of vanadium garnets NaPb2Co2V3O12 and NaPb2Ni2V3O12

Vanadium garnets NaPb₂Co₂V₃O₁₂ and NaPb₂Ni₂V₃O₁₂ have been successfully synthesized. The X-ray diffraction experiments indicate that these compounds have the garnet structure of cubic symmetry of space group with the lattice constant of 12.742 Å (NaPb₂Co₂V₃O₁₂) and 12.666 Å (NaPb₂Ni₂V₃O₁₂), respectively. The magnetic susceptibility of NaPb₂Ni₂V₃O₁₂ shows the Curie-Weiss paramagnetic behavior between 4.2 and 350 K. The effective magnetic moment μ_eff of NaPb₂Ni₂V₃O₁₂ is 3.14 μ_B due to Ni²⁺ ion at A-site and the Weiss constant is −3.67 K (antiferromagnetic sign). For NaPb₂Co₂V₃O₁₂, the simple Curie-Weiss law cannot be applicable. The ground state is the spin doublet and the first excited state is spin quartet , according to Tanabe-Sugano energy diagram on the basis of octahedral crystalline symmetry. This excited spin quartet state just a bit higher than ground state influences strongly the complex temperature dependence of magnetic susceptibility for NaPb₂Co₂V₃O₁₂.     

Synthesis and crystallographic studies of garnet-type AgCa2Mn2V3O12 and NaPb2Mn2V3O12

High-purity powder specimens of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ have been successfully synthesized by solid-state chemical reaction. The Rietveld refinements from X-ray powder diffraction data verified that these compounds have the garnet-type structure (space group , No. 230) with the lattice constant of a=12.596(2) Å for AgCa₂Mn₂V₃O₁₂ and a=12.876(2) Å for NaPb₂Mn₂V₃O₁₂. Calculation of the bond valence sum supported that Mn is divalent and V is pentavalent in these garnets. Estimation of the quadratic elongation and the bond angle variance showed that the distortions of the MnO₆ octahedra and the VO₄ tetrahedra are significantly suppressed. Our new results of AgCa₂Mn₂V₃O₁₂ and NaPb₂Mn₂V₃O₁₂ are compared to those of AgCa₂M₂V₃O₁₂ and NaPb₂M₂V₃O₁₂ (M=Mg, Co, Ni, Zn).     

Recent development and application of Li4Ti5O12 as anode material of lithium ion battery

Lithium-ion batteries with both high power and high energy density are one of the promising power sources for electric devices, especially for electric vehicles (EV) and other portable electric devices. One of the challenges is to improve the safety and electrochemical performance of lithium ion batteries anode materials. Li₄Ti₅O₁₂ has been accepted as a novel anode material of power lithium ion battery instead of carbon because it can release lithium ions repeatedly for recharging and quickly for high current. However, Li₄Ti₅O₁₂ has an insulating character due to the electronic structure characterized by empty Ti 3d-states, and this might result in the insufficient applications of LTO at high current discharge rate before any materials modifications. This review focuses first on the present status of Li₄Ti₅O₁₂ including the synthesized method, doping, surface modification, application and theoretical calculation, then on its near future development.     

Vibrational and Fe-Mössbauer spectra of LaFeGe2O7 and NdFeGe2O7

The infrared, Raman and ⁵⁷Fe-Mössbauer spectra of LaFeGe₂O₇ and NdFeGe₂O₇ were recorded and analysed on the basis of their structural characteristics. Some comparisons with the stoichiometrically related materials containing the heavier lanthanides are made, showing that it is possible to differentiate spectroscopically both groups of materials. The Mössbauer parameters clearly reflect the small structural differences in the FeO₅-polyhedra present in these compounds.     

Advanced electrochemical performance of LiMn1.4Cr0.2Ni0.4O4 as 5 V cathode material by citric-acid-assisted method

Spinel LiMn₂O₄ and LiMn_1.4Cr_0.2Ni_0.4O₄ cathode materials were successfully synthesized by the citric-acid-assisted sol-gel method with ultrasonic irradiation stirring. The structure and electrochemical performance of the as-prepared powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometer, cyclic voltamogram (CV) and the galvanostatic charge-discharge test in detail. XRD shows that all the samples have high phase purity, and the powders are well crystallized. SEM exhibits that LiMn_1.4Cr_0.2Ni_0.4O₄ has more uniform cubic-structure morphology than that of LiMn₂O₄. EDX reveals that a small amount of Mn³⁺ still exists in LiMn_1.4Cr_0.2Ni_0.4O₄. The galvanostatic charge-discharge test indicates that the initial discharge capacities for the LiMn_1.4Cr_0.2Ni_0.4O₄ and LiMn₂O₄ at 0.15 C discharge rates are 130.8 and 130.2 mAh g⁻¹, respectively. After 50 cycles, their capacity are 94.1% and 85.1%, respectively. The CV curve implies that Ni and Cr dual substitutions are beneficial to the reversible intercalation and deintercalation of Li⁺, and suppress Mn³⁺ generation at high temperatures and provide improved structural stability.     

Preparation, characterization and electrochemical property of Sn-Fe-Mo-Al2O3 multi-phase composites

A novel technique has been developed to synthesize Sn-Fe-Mo-Al₂O₃, while nanoscale dispersion of a highly active tin phase was finely distributed in a stable inert multi-phase. The precursor was prepared by co-precipitation method with SnCl₄, FeCl₃, AlCl₃ and (NH₄)₆Mo₇O₂₄ as the raw materials. Sn-Fe-Mo-Al₂O₃ mixture was produced by reducing the precursor with H₂. The product was characterized by X-ray diffraction (XRD), ICP and scanning electron microscopy (SEM). The performance of the electrode was investigated. The Sn-Fe-Mo-Al₂O₃ electrode was found to have an initial charge capacity of over 461 mAh/g, and a reversible volumetric capacity of 2090 mAh/cm³, which is two times larger than that of graphite electrode (800 mAh/cm³). The coulomb efficiency in the first cycle was over 55%, but its cyclability was not improved significantly. In order to enhance the cycle performance, we investigated the anode after heat treated at 270 °C for 12 h. Under the same condition, the first charge-discharge characteristics were almost equivalent to the as-coated anode, and the retention capacity ratio after 20 cycles was improved from 41.1% to 86.5%. The heat-treated Sn-Fe-Mo-Al₂O₃ electrode exhibited better cycle life. The electrochemical reaction of the Sn-Fe-Mo-Al₂O₃ electrode with Li may obey the alloying-dealloying mechanism of Li_xSn(x?4.4) formation in the other tin-based electrodes.     

Self-assembled CaMoO4 and CaMoO4:Eu hierarchical superstructures: Facile sonochemical route synthesis and tunable luminescent properties

Tetragonal CaMoO₄ and CaMoO₄:Eu³⁺ with various novel three-dimensional (3D) hierarchical architectures were successfully synthesized via a facile, efficient sonochemistry process in the absence of any surfactant or template. XRD, EDS, FE-SEM, and photoluminescence (PL) were employed to characterize the as-obtained products. It was found that morphology modulation could be easily realized by changing pH value of the precursor. The pH value of the precursor not only affected the substructures of the hierarchical structures, but also determined the size distributions of the final products. The formation mechanism for different hierarchical architectures was proposed on the basis of time-dependent experiments. The luminescence spectra showed that CaMoO₄:Eu³⁺ phosphors can be effectively excited by the near ultraviolet (UV) (396 nm) and blue (466 nm) light, and exhibited strong red emission around 615 nm, which was attributed to the Eu³⁺⁵D₀→⁷F₂ transition. Compared with Y₂O₃:Eu³⁺ phosphor, CaMoO₄:Eu³⁺ is much more stable, efficient and suitable, therefore, this phosphors could be a promising red component for possible applications in the field of LEDs.     

Preparation and characterization of NiFe2O4/NiO composite film via a single-source precursor route

NiFe₂O₄/NiO nanocomposite thin films have been successfully prepared through a facile route using nickel iron layered double hydroxide (NiFe-LDH) as a single-source precursor. This synthetic approach mainly involves the formation of NiFe-LDH film by casting the slurry of NiFe-LDH precursor on the α-Al₂O₃ substrate, followed by high-temperature calcination. The composition, microstructure and properties of the films were characterized in detail by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and vibrating sample magnetometer (VSM). The results indicate that NiFe₂O₄/NiO composite film was composed of granules with diameter less than 100 nm, and the thickness of the film was in the range 1-2 μm. The magnetization of the film can be tuned by alternating the Ni/Fe molar ratio of LDH precursor. In addition, the method developed should be easily extended to fabricate other MFe₂O₄/MO composite film systems with specific applications just by an appropriate combination of divalent/trivalent composition in the precursor of LDHs.     

Photoluminescence and gamma-ray irradiation of SrAl2O4:Euand Y2O3:Eu phosphors

Y₂O₃:Eu³⁺ phosphor is a very attractive material for use as a red phosphor in many fields. SrAl₂O₄:Eu²⁺ belongs to long lasting phosphor (LLP) and it is a useful bluish-green luminescence material, which can also be a promising candidate as a simple and easy-to-use radiation detection element for visual display of two dimensional radiation distributions. In the present study, both these two kinds of phosphors were synthesized using high temperature solid state reactions. In our work, the influence of gamma-ray irradiation on the properties of these two kinds of phosphors was studied by comparing photoluminescence, brightness and the decay curve of unirradiated and gamma-ray-irradiated samples. Conclusions from the present work can be briefly summarized as follows. In irradiated samples, the brightness is decreased without sensible change in the wavelength distribution of the luminescence spectrum and in the decay kinetic upon gamma exposure. Moreover, the emission due to Eu³⁺→Eu²⁺ conversion in Y₂O₃:Eu³⁺ phosphors was not observed in our sample after irradiation to high exposure. Also the brightness of SrAl₂O₄:Eu²⁺ phosphor turned out to decrease after the exposition to ionizing radiation while the luminescence wavelength distribution remained unchanged. The reason for the effect of gamma-ray irradiation on the properties of phosphors is also discussed in the paper.     

Synthesis and electrochemical performances of Li4Ti4.95Al0.05O12/C as anode material for lithium-ion batteries

Spinel compounds Li₄Ti_5−xAl_xO₁₂/C (x=0, 0.05) were synthesized via solid state reaction in an Ar atmosphere, and the electrochemical properties were investigated by means of electronic conductivity, cyclic voltammetry, and charge-discharge tests at different discharge voltage ranges (0-2.5 V and 1-2.5 V). The results indicated that Al³⁺ doping of the compound did not affect the spinel structure but considerably improved the initial capacity and cycling performance, implying the spinel structure of Li₄Ti₅O₁₂ was more stable when Ti⁴⁺ was substituted by Al³⁺, and Al³⁺ doping was beneficial to the reversible intercalation and deintercalation of Li⁺. Al³⁺ doping improved the reversible capacity and cycling performance effectively especially when it was discharged to 0 V.     

Intralamellar structural modifications related to the proton exchanging in K4Nb6O17 layered phase

Basic structural aspects about the layered hexaniobate of K₄Nb₆O₁₇ composition and its proton-exchanged form were investigated mainly by spectroscopic techniques. Raman spectra of hydrous K₄Nb₆O₁₇ and H₂K₂Nb₆O₁₇·H₂O show significant modifications in the 950-800 cm⁻¹ region (Nb-O stretching mode of highly distorted NbO₆ octahedra). The band at 900 cm⁻¹ shifts to 940 cm⁻¹ after the replacement of K⁺ ion by proton. Raman spectra of the original materials and the related deuterated samples are similar suggesting that no isotopic effect occurs. Major modifications were observed when H₂K₂Nb₆O₁₇ was dehydrated: the relative intensity of the band at 940 cm⁻¹ decreases and new bands seems to be present at about 860-890 cm⁻¹. The H⁺ ions should be shielded by the hydration sphere what preclude the interaction with the layers. Removing the water molecules, H⁺ ions can establish a strong interaction with oxygen atoms, decreasing the bond order of Nb-O linkage. X-ray absorption near edge structure studies performed at Nb K-edge indicate that the niobium coordination number and oxidation state remain identical after the replacement of potassium by proton. From the refinement of the fine structure, it appears that the Nb-Nb coordination shell is divided into two main contributions of about 0.33 and 0.39 nm, and interestingly the population, i.e., the number of backscattering atoms is inversed between the two hexaniobate materials.