The phase stability of Ca2TiO4 and related Ruddlesden–Popper phases

The Ruddlesden–Popper phases of the Ca–Ti–O system, Ca_n+1Ti_nO_3n+1, are investigated by means of atomistic simulations employing empirical pair potentials. The stability of the phases is examined in terms of various reaction schemes: the formation from the binary oxides, the addition of the perovskite oxide to a given phase, and the reaction between perovskite and rock-salt oxides. The energies of these reactions are compared with results previously obtained for the Ruddlesden–Popper phases of the Sr–Ti–O system. The importance of the disproportionation reaction of the various R–P phases in both Ca and Sr systems is also emphasized. The results obtained are in good agreement with experimental observations regarding both systems.     

Electrical conductivity and structural stability of SrCo1−xFexO3−δ

Perovskite compounds in the system of SrCo_1−xFe_xO_3−δ (x=0.2, 0.4 and 0.6) were synthesized by solid state reaction. SrCo_1−xFe_xO_3−δ shows the p-type small polaron conduction behavior. Electrical conductivity and oxygen vacancy content decrease with increase in Fe content. The incorporation of Fe increases the structural stability of SrCo_1−xFe_xO_3−δ at low temperatures, while decreasing the structural stability at high temperatures. Oxygen partial pressure has a strong influence on electrical conductivity. At low oxygen partial pressure, SrCo_0.8Fe_0.2O_3−δ will transform from cubic to orthorhombic structure. This structure can remain in 5%H₂/Ar only for a short time and then dissociates into Sr₃Fe₂O_6.64 and Co due to the reduction of B-site elements.     

Chemical reactions in TiO2/SnO2/TiCl4 hybrid electrodes and their impacts to power conversion efficiency of dye-sensitized solar cells

This study examined the applicability of TiO₂/SnO₂/TiCl₄ hybrid electrodes in dye-sensitized solar cells (DSSCs) by combining chemical modeling with experimentation. The interfacial chemical reactions in a TiO₂/SnO₂/TiCl₄ system were simulated using a thermochemistry software package, which led to the design and testing of hybrid working electrodes. Chemical thermodynamic modeling proved that TiCl₄ is an effective agent in removing Tiⁿ⁺ (n<4) and Sn^m+ (m<4) ion impurities from dry-mixed TiO₂/SnO₂ composite particles. Our results demonstrate that the power conversion efficiency of DSSC with a TiO₂/SnO₂/TiCl₄ hybrid electrode exceeds that of the conventional DSSC with a TiO₂ electrode due to the effects of light-scattering and the formation of additional absorbance (SnCl₂), which is an unexpected side effect of TiCl₄ treatment enabling the absorption of visible light. The proposed approach is ideally suited to establishing relationships between chemistry theory and the structure and performance of advanced DSSCs as well as photo-electro-chemical systems.     

Electrical properties of copper-manganese spinel solutions and their cation valence and cation distribution

The cation valence and distribution in copper manganese spinels containing 1.0-1.6 mol copper per formula unit (Cu_xMn_3−xO₄) was resolved from their electrical conductivity and thermoelectric properties. The limit of thermal stability of the cubic spinel phase was also determined for each stoichiometry. A corrected phase diagram for the Cu-Mn-O system in air is proposed accordingly. The electronic defect structure could be described through a chemical approach, involving the competition between the redox of Cu⁺ and Mn⁴⁺ to Cu²⁺ and Mn³⁺ and the disproportionation of the Jahn-Teller ion Mn³⁺ into Mn²⁺ and Mn⁴⁺. Thermodynamic parameters for the redox reaction were determined from experimental data as well as calculated, confirming the validity of the modeled defect equilibria.     

Effect of Gd doping on structural, electrical and magnetic properties of BiFeO3 electroceramic

Room temperature multiferroic electroceramics of Gd doped BiFeO₃ monophasic materials have been synthesized adopting a slow step sintering schedule. Incorporation of Gd nucleates the development of orthorhombic grain growth habit without the appearance of any significant impurity phases with respect to original rhombohedral (R3c) phase of un-doped BiFeO₃. It is observed that, the materials showed room temperature enhanced electric polarization as well as ferromagnetism when rare earth ions like Gd doping is critically optimized (x=0.15) in the composition formula of Bi_1+2xGd_2x/2Fe_1−2xO₃. We believe that magnetic moment of Gd⁺³ ions in Gd doped BiFeO₃ tends to align in the same direction with respect to ferromagnetic component associated with the iron sub lattice. The dielectric constant as well as loss factor shows strong dispersion at lower frequencies and the value of leakage current is greatly suppressed with the increase in concentration of x in the above composition. Addition of excess bismuth and Gd (x=0.1 and 0.15) caused structural transformation as well as compensated bismuth loss during high temperature sintering. Doping of Gd in BiFeO₃ also suppresses spiral spin modulation structure, which can change Fe-O-Fe bond angle or spin order resulting in enhanced ferromagnetic property.     

Structure and magnetic properties of Ca1−x−yMgxCu2+yO3 influenced by isoelectronic substitution x

Phases of the composition Ca_1−x−yMg_xCu_2+yO₃ have been prepared for the first time. The compounds are isostructural with the known end-members CaCu₂O₃ and MgCu₂O₃ showing a two-leg spin-ladder-like connection of copper and oxygen atoms within the Cu₂O₃-layer. Opposite the spin ladders this layer is folded, which results in a long-range antiferromagnetic ordering of these phases. The Néel temperature can be adapted by variation of x in Ca_1−x−yMg_xCu_2+yO₃ between 24 and 80 K. Several structural features, which influence the magnetic ordering, are discussed.     

Hyperfine interactions in some Aurivillius Bim+1Ti3Fem−3O3m+3 compounds

X-ray diffraction and Mössbauer spectroscopy were applied as complementary methods to investigate the structure and hyperfine interactions in the series of Bi_m+1Ti₃Fe_m−3O_3m+3 Aurivillius compounds with m=4, 6, 7 and 8. Samples were synthesized by the solid-state sintering method at various temperatures. As X-ray diffraction analysis proved, the compounds formed single phases at temperature above 993 K. Mössbauer studies have confirmed diffraction measurements. Compounds synthesized at 993 K contained residual hematite, however these sintered at elevated temperatures were single-phased materials. Room-temperature Mössbauer spectra of Bi_m+1Ti₃Fe_m−3O_3m+3 compounds revealed their paramagnetic properties, what is consistent with the literature data concerning the Néel temperature of these ceramics (T_N is smaller than room temperature). Detailed analysis of MS spectra allowed to state that iron ions may occupy both tetrahedral and octahedral sites in the crystallographic lattice of Aurivillius compounds.     

Solid-state NMR study of bioactive binary borosilicate glasses

A series of binary borosilicate glasses prepared by the sol-gel method are shown to be bioactive. Tetraethyl orthosilicate (TEOS) and trimethylborate (TMB) in acidic medium are used to prepare xB₂O₃·(1−x)SiO₂ glass systems for x=0.045-0.167. The formation of a layer of apatite-like mineral on the glass surface becomes apparent after soaking in simulated body fluid for 48 h. We have measured the ¹¹B-¹¹B homonuclear second moments of the borosilicate glasses and inferred that no macroscopic phase separation occurred in our glasses. The ¹¹B chemical shift data also show that the formation of clustered boroxol rings is negligible in our glass system. Although the bioactivity of our borosilicate glasses is less than that of CaO-SiO₂ sol-gel glasses, these simple binary systems could be taken as reference glass systems for the search of new bioactive borosilicate glasses.     

Theoretical study of metal-insulator transition in rhombohedral vanadium sesquioxide

The electronic structure and the metal-insulator transition (MIT) of V₂O₃ are investigated in the framework of density functional theory and GGA+U. It is found that, both the insulating and metallic phases can be realized in rhombohedral structure by varying the on-site Coulomb interaction, and the MIT in V₂O₃ can take place without any structure phase transition. Our calculated energy gap (0.63 eV) agrees with experimental result very well. The metallic phase exhibits high spin (S=1) character, but it becomes S=1/2 in insulating phase. According to our analysis, the Mott-Hubbard and the charge-transfer induce the MIT together, and it supports the mechanism postulated by Tanaka (2002) [11].     

Effects of protons and acceptor substitution on the electrical conductivity of La6WO12

Transport properties and non-stoichiometry of La_1−xCa_xW_1/6O₂ and La_1−yW_1/6O₂ (x=0, 0.005, 0.05; y=0.05, 0.1) have been characterized by means of impedance spectroscopy, the EMF-technique, H⁺/D⁺ isotope exchange, and thermogravimetry in the temperature range 300-1200 °C as a function of oxygen partial pressure and water vapor partial pressure. The materials exhibit mixed ionic and electronic conductivities; n- and p-type electronic conduction predominate at high temperatures under reducing and oxidizing conditions, respectively. Protons are the major ionic charge carrier under wet conditions and predominates the conductivity below ∼750 °C. The maximum in proton conductivity is observed for LaW_1/6O₂ with values reaching 3×10⁻³ S/cm at approximately 800 °C. The high proton conductivity for the undoped material is explained by assuming interaction between water vapor and intrinsic (anti-Frenkel) oxygen vacancies.     

Synthesis and structure refinement of layered perovskites Ba5−xLaxNb4−xTixO15 (x=0, 1, 2, 3 and 4) solid solutions

Ba_5−xLa_xNb_4−xTi_xO₁₅ solid solutions were prepared by solid state reaction method. Structural analysis for the stoichiometric phases was performed for x=0, 1, 2 and 3 by Rietveld analysis of neutron powder diffraction data. The x=0, 1 and 2 members could be refined in the space group P-3m1 (stacking sequence chhcc, polytypoid 5 H). There is a decrease in cell volume as x increases. La³⁺ occupies preferentially the A2 site (Wyckoff site 2d) and Ti⁴⁺ the B2 site (Wyckoff site 2c). As x increases there is an increase of the global instability index (GII) (which is a measure of the extent to which the BVS rule is violated over the whole structure) indicating the presence of intrinsic strains large enough to cause instability at room temperature. This strain is responsible for a structural change for the member with x=3, which could be refined in the space group P-3c1 (stacking sequence (chhcc)₂, polytypoid 2×5H=10H). This change in space group is associated with a cooperative rotation of (Nb/Ti)O₆ octahedra around the c-axis, necessary to accommodate the smaller La³⁺ ion in the cuboctahedral cavity.     

Preparation and characteristics of Sb-doped LiNiO2 cathode materials for Li-ion batteries

Compounds LiNi_1−xSb_xO₂ (x=0, 0.1, 0.15, 0.2, 0.25) were synthesized by the two-step calcination method. The structural and morphological properties of the products were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD analysis confirms that the uniform solid solution has been formed in the as-prepared compounds without any impurities. It is shown that the crystal lattice parameters (a, c) of the Sb-doped compounds are bigger than those of pure LiNiO₂ and the Sb-doped compound with x=0.2 consists of spherical-like nanoparticles with a mean grain size of 50 nm. The electrochemical performances of as-prepared samples were studied via galvanostatic charge-discharge cycling tests. The compound with x=0.2 exhibits excellent capacity retention during the charge-discharge processes due to its reinforced structural stability, and a discharge capacity of 102.4 mAh/g is still obtained in the voltage range of 2.5-4.5 V after 20 cycles. Thermal analysis further confirms that the structural stability of LiNi_0.8Sb_0.2O₂ is superior to that of pure LiNiO₂.     

A comparative study on the glass-forming ability of some alloys in the Sb-As-Se system by differential scanning calorimetry

The glass-forming ability and devitrification of alloys in the Sb-As-Se system have been studied by differential scanning calorimetry (DSC). A comparison of various simple quantitative methods to assess the level of stability of glassy materials in the above-mentioned system is presented. All these methods are based on the characteristic temperatures, obtained by heating of the samples in non-isothermal regime, such as the glass transition temperature, T_g, the temperature at which crystallization begins, T_in, the temperature corresponding to the maximum crystallization rate, T_p, or the melting temperature, T_m. In this work, a kinetic parameter K_r(T) is added to the stability criteria. The thermal stability of some ternary compounds of Sb_xAs_{0.60−(2x+y)}Se_0.40+x+y-type has been evaluated experimentally and correlated with the activation energies of crystallization by this kinetic criterion and compared with those evaluated by other criteria.     

Cation mobility and structural changes on the water removal in zeolite-like zinc hexacyanometallates (II)

The cation (A⁺) mobility and structural changes on the water molecules removal in zeolite-like zinc hexacyanometallates series, Zn₃A₂[Fe(CN)₆]₂·xH₂O with A=Na, K, Rb and Cs, were studied from X-ray diffraction data recorded for hydrated and anhydrous samples at room temperature and at 77 K. The crystal structure for the anhydrous phases were solved and refined and then compared with those corresponding to their hydrated form. On the water molecules removal the charge balancing cation (A⁺) migrates to favor a stronger interaction with the N ends of the CN bridges where the framework negative charge is located. This cation-framework interaction model is supported by the recorded IR spectra for both hydrated and anhydrous samples. The new cation position induces distortion for both the cavity shape and their windows and also leads to cavity volume reduction. This is relevant for the properties of this family of solids as porous materials and their behavior in adsorption and separation processes, among them for hydrogen storage.     

Effect of Bi2O3 on EPR, optical transmission and DC conductivity of vanadyl doped alkali bismuth borate glasses

Glasses with composition xBi₂O₃·(30−x)M₂O·70B₂O₃ (M=Li, Na) containing 2 mol% V₂O₅ have been prepared over the range 0≤x≤15 (x is in mol%). The electron paramagnetic resonance spectra of VO²⁺ of these glasses have been recorded in the X-band (≈9.3 GHz) at room temperature (RT≈300 K). Spin Hamiltonian parameters, g_∥, g_⊥, A_∥, A_⊥, dipolar hyperfine coupling parameter, P, and Fermi contact interaction parameter, K, have been calculated. The molecular orbital coefficients, α² and γ², have been calculated by recording the optical transmission spectra. In xBi₂O₃·(30−x)Li₂O·70B₂O₃ glasses there is decrease in the tetragonality of the V⁴⁺O₆ complex for x up to 6 mol% whereas for x≥6 mol%, tetragonality increases. In xBi₂O₃·(30−x)Na₂O·70B₂O₃ glasses there is increase in the tetragonality of the V⁴⁺O₆ complex with increasing x. The 3d_xy orbit expands with increase in Bi₂O₃:M₂O ratio. Values of the theoretical optical basicity, Λ_th, have also been reported. The DC conductivity increases with increase in temperature. The order of conductivity is 10⁻⁵ ohm⁻¹ m⁻¹ at low temperature and 10⁻³ ohm⁻¹ m⁻¹ at high temperature. The DC conductivity decreases and the activation energy increases with increase in Bi₂O₃:M₂O ratio.     

Defect clusters in titanium-substituted spinel-related lithium ferrite

The cation distribution in spinel-related titanium-substituted lithium ferrite, Li_0.5+0.5xFe_2.5−1.5xTi_xO₄ has been explored using interatomic potential and ab initio calculations. The results suggest that the cation distribution with Ti⁴⁺ substituting for Fe³⁺ on octahedral B sites and excess Li⁺ substituting for Fe³⁺ on tetrahedral A sites is stabilised by the formation of clusters of two octahedrally coordinated Ti⁴⁺ ions and one tetrahedrally coordinated Li⁺ ion linked through a common oxygen.     

Phase transformation behavior and dielectric characteristics of BaTi1−x(Al1/2Nb1/2)xO3 (0.01≤x≤0.40) ceramics

Microstructure, phase transformation behavior and dielectric properties of BaTi_1−x(Al_1/2Nb_1/2)_xO₃ (0.01≤x≤0.40) ceramics were investigated. A high level of (Al_1/2Nb_1/2)⁴⁺ substitution for Ti⁴⁺ ions was not conducive to the stability of the perovskite structure and resulted in the formation of BaAl₂O₄. As x was increased, lattice constants and unit cell volume decreased, reached a minimum at x=0.10 and then increased. The BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics at room temperature experienced a transformation from ferroelectric to paraelectric phase with increasing (Al_1/2Nb_1/2)⁴⁺ concentration. Meanwhile, permittivity of the BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics was markedly reduced, while Q value was slightly increased. Frequency dispersion of dielectric peak was obviously increased as x was increased from 0.01 to 0.10. It is of great interest that a dielectric abnormity represented by a broad dielectric peak at 200-400 K was observed for the composition with x=0.40.     

Synthesis,photophysical properties,and photocatalytic applications of Bi doped NaTaO3 and Bi doped Na2Ta2O6 nanoparticles

Phase formation and photophysical properties of bismuth doped sodium tantalum oxide (perovskite, defect pyrochlore) nanoparticles prepared by a hydrothermal method were studied in detail. It was revealed that the synthesis conditions like NaOH concentration and bismuth precursor (NaBiO₃·2H₂O) markedly affect the crystal structure of sodium tantalum oxide. At low NaOH concentration and high bismuth precursor (NaBiO₃·2H₂O) content, Bi doped Na₂Ta₂O₆ (defect pyrochlore) phase was predominantly formed, while at higher NaOH concentration, Bi doped NaTaO₃ (perovskite) phase was formed. It was observed that the defect pyrochlore (Bi doped Na₂Ta₂O₆) phase was formed and stabilized by the presence of dopant precursor (NaBiO₃·2H₂O). The chemical analysis of the samples confirmed the doping of Bi³⁺ cations in both phases. Doping of bismuth enabled visible light absorption up to 500 nm in perovskite and defect pyrochlore type sodium tantalum oxide. Bi doped NaTaO₃ samples showed better performance for the photocatalytic degradation of rhodamine B than that of Bi doped Na₂Ta₂O₆, under visible light irritation (λ>420 nm). The present results shed light on phase formation of sodium tantalate and these results are useful in understanding properties of NaTaO₃ based compounds, synthesized by the hydrothermal method.     

Synthesis and structural study of LaNi1−xMnxO3+δ perovskites

The synthesis of LaNi_1−xMn_xO_3+δ samples with different oxygen contents has been performed. Structural characterization was carried out by X-ray and neutron powder diffraction. The crystallographic structure of stoichiometric samples, δ=0, evolves from an orthorhombic (LaMnO₃) to a rhombohedral (LaNiO₃) unit cell. Oxygen excess, δ>0, seems to stabilize the rhombohedral unit cell. For instance, the unit cells at room temperature are orthorhombic and rhombohedral for LaNi_0.1Mn_0.9O_3.0 and LaNi_0.1Mn_0.9O_3.13, respectively. The X-ray patterns show the coexistence of both phases for LaNi_0.5Mn_0.5O_3+δ at room temperature. This coexistence is not ascribed to chemical inhomogeneities, but to a structural phase transition. Neutron patterns collected from 1.5 to 300 K show a continuous evolution except for LaNi_0.5Mn_0.5O_3.08 and LaNi_0.1Mn_0.9O_3.13, which show a phase transition at around 290 and 220 K, respectively. The neutron patterns suggest the presence of an ordered arrangement of Ni and Mn atoms in the crystallographic unit cell. Such arrangement indicates that LaNi_0.5Mn_0.5O₃ could be considered as a double perovskite (nominal formula, La₂NiMnO₆).     

Study of potassium-zinc borophosphate glasses

Potassium-zinc borophosphate glasses were prepared and studied in two compositional series xK₂O-(50−x)ZnO-10B₂O₃-40P₂O₅ and xK₂O-(50−x)ZnO-20B₂O₃-30P₂O₅ with x=0, 10, 20, 30, 40 and 50 mol% K₂O. The replacement of zinc by potassium decreases the density and increases the molar volume of these glasses, whereas glass transition temperature and chemical durability decrease with increasing potassium content. Structural changes were studied by ¹¹B and ³¹P MAS NMR and Raman spectroscopy. The observed changes in the spectra and the properties of the studied glasses can be ascribed to several reasons and namely to the differences in the space occupied by cations Zn²⁺ and 2K⁺, the differences in the electronegativity of zinc and potassium and a large difference in the field strength of Zn²⁺ and K⁺ cations and thus higher ionicity of K-O bonds in comparison with Zn-O bonds.