Characterization of multiferroic LiTMxCu2−xO2 (TM=Ni and Zn) single crystals

We investigate a series of single crystalline samples of LiT_MxCu_2−xO₂ (T_M=Ni and Zn) grown by floating-zone technique. As-grown crystals showed a clear X-ray diffraction pattern of pure(single) phase. These crystals exhibit varied magnetic and electrical properties owing to successful incorporation of Ni and Zn dopants.     

Specific heat and magnetic susceptibility of single-crystalline ZnCr2−xAlxSe4 (x=0.15, 0.23)

A correlation between the second critical field H_c2 of the helix to paramagnetic transition and the magnetic specific heat C-peak was found in ZnCr_2−xAl_xSe₄ spinel single crystals with x=0.15, 0.23. The specific heat peak is anomalously sharp for all finite magnetic fields used here and this points to a first order magneto-structural transition (from cubic to tetragonal symmetry). The C(T)-peak is increasingly suppressed as the external field increases. Approaching the Neel temperature T_N, a broad ac-magnetic susceptibility peak is observed for zero dc-magnetic field. That peak does not show an energy loss and thus points towards a return to a second order type of transition. The magnetic contribution to the specific heat displays a sharp peak at T_N and is maximal at the spin fluctuation temperature T_sf=34 K. T_sf is related to the maximum of the magnetic susceptibility at T_m=40 K (at 50 kOe) in the spin fluctuation region, as evidenced by the entropy exceeding 90% of the entropy calculated classically for the complete alignment of the Cr spins, (2−x)R ln(2S+1). The X-ray photoelectron spectroscopy (XPS) data indicate that Al-substitution does not affect Cr³⁺ 3d³ electronic configuration.     

Preparation,characterization and photocatalytic performance of noble metals (Ag,Pd, Pt,Rh) deposited on sponge-like ZnO microcuboids

Novel sponge-like ZnO microcuboids with a hierarchical structure were fabricated via an alcoholic thermal process. Then a series of noble metals (Ag, Pd, Pt, Rh) was loaded onto the microcuboids. The samples obtained were characterized by nitrogen physical adsorption, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectroscopy (DRS), and X-ray photoelectron spectroscopy (XPS). The results show that the ZnO microcuboids have a high surface area and a sponge-like hierarchical structure. Activity tests for the degradation of acid orange II dye showed that the noble metals enhanced the activity of ZnO to different extents. For loading of 0.5 wt.%, the activity enhancement decreased in the order Pd>Ag>Pt>Rh. Co-loading of Pd and Ag had a detrimental effect on activity compared to single loading. The enhanced photocatalytic performance can be attributed to an increase in the rate of separation of photogenerated e^–/h⁺ pairs induced by the noble metals.     

Metastable phenomena in lutetium nitrate crystal

The ac conductivities along the c-axis of the lutetium nitrate crystal were measured successively in the frequency range from 0.5 to 10⁵ Hz at temperatures from 290 to 210 K. The metastable behaviors of the conductivity were found in the temperature region above 200 K. The fluctuation was given by the successive measurements of the time series of the ac conductivities and represented by non-Gaussian probability distribution function. The effect of the metastable singularity on Raman scattering spectra was observed in the metastable temperature region.     

Optical properties of Er:SrMoO4 single crystal

Er³⁺:SrMoO₄ crystal of high optical quality was grown by the Czochralski method. The room temperature polarized absorption and emission spectra together with the lifetime decay curve were measured. Based on the Judd-Ofelt theory, three intensity parameters, radiative transition rates, radiative lifetimes and fluorescent branching ratios, were obtained. Emission cross-section and gain cross-section around 1.54 μm were also obtained.     

Optical and electric properties of Nb-doped anatase TiO2 single crystal

Nb-doped anatase TiO₂ single crystal has been grown by chemical vapour transport method. Raman spectra shows that the obtained crystal with Nb of 0.08 wt% has typical anatase structure. An absorption band was observed at around 2.2 eV, which seems to be due to the d-d transition in the conduction band. The electron paramagnetic resonance and electric resistivity measurements show that the doped niobium makes quite shallow donor level whose orbital is d_xy-like centered at the titanium position of anatase.     

On the crystal geometry influence on the growth of fast-growing surfaces

The external morphology of a given crystal is determined by the growth conditions, growth time and geometry of the crystal. Up to now, it has been believed that the growth conditions which influence the relative growth rates of surfaces play the key role in the formation of the final crystal morphology. In this paper, it is shown that the geometry of a given crystal, expressed by the trigonometric function of appropriate interfacial angles, may influence to a great degree the crystallisation process and the morphology of crystals. For example, it is shown that at particular geometry of a crystal, a given surface may exist in the habit and develop its size although it grows much faster than the neighbouring surfaces.     

Synthesis, growth and characterization of novel second harmonic nonlinear chalcone crystal

Nonlinear optical (NLO) materials are useful in many of the industrial applications. New NLO chalcone derivative (2E)-3-[4-(methylsulfanyl)phenyl]-1-(4-nitrophenyl)prop-2-en-1-one (4N4MSP) crystals have been grown by slow evaporation technique at ambient temperature. The grown crystals were subjected to single crystal X-ray diffraction study. The crystal has noncentrosymmetric structure in the orthorhombic system with space group Aba2 and unit cell parameters a=14.0647(15) Å, b=33.738(4) Å and c=6.0039(6) Å. To confirm the presence of various functional groups in the compound, FT-IR spectrum was recorded. The crystal was subjected to TGA/DTA analysis to find its thermal stability. The grown crystals were characterized for their optical transmission and mechanical hardness. The second harmonic generation (SHG) efficiency of the crystal is obtained by classical powdered technique using Nd:YAG laser and its value is 28.57 times that of urea. The laser damage threshold for 4N4MSP crystal was determined using Q-switched Nd:YAG laser. The refractive index values for green and red wavelengths were measured by Brewster angle technique. The dielectric and electrical measurements were carried out to study the different polarization mechanism and conductivity of the crystal. Good thermal, mechanical, transmission and SHG response make it desirable for the NLO applications.     

Paramagnetic susceptibilities, crystal field Stark energies and hyperfine properties of Eu in europium trifluoromethanesulfonate nonahydrate

Hexagonal single crystals of europium trifluoromethanesulfonate nonahydrate (EuTFMS) have been prepared. The paramagnetic susceptibility perpendicular to the symmetry axis (c-axis, χ_⊥) and the principal magnetic anisotropy (Δχ=χ_||−χ_⊥) were measured in the temperature range of 300-13 and 300-80 K, respectively. The paramagnetic susceptibility parallel to the c-axis (χ_||) was calculated using the values of χ_⊥ and Δχ. χ_|| and χ_⊥ increase slowly with decrease of temperature and below ∼93 K, χ_⊥ is more or less constant. But χ_|| levels off below ∼137 K. The calculated value of the effective magnetic moment (P_eff) of Eu³⁺ in the crystalline environment of EuTFMS decreases with lowering of temperature. The Raman and Fourier transform infrared (FTIR) spectra of EuTFMS were recorded in the wavenumber range of 10-1800 and 370-6000 cm⁻¹, respectively. A good theoretical simulation of the observed magnetic properties including the CF Stark energies of the ground term (⁷F) extracted from the Raman and FTIR spectra of Eu³⁺ in EuTFMS have been achieved using one electron crystal field (CF) analysis. The electronic specific heat and other relevant CF dependent hyperfine properties, viz, nuclear quadrupole splitting and hyperfine specific heat have been computed.     

Photocatalytic photodegradation of xanthate over C, N, S-tridoped TiO2 nanotubes under visible light irradiation

C, N, S-tridoped TiO₂ nanotubes were synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), the Brunauer-Emmett-Teller method (BET), and UV-vis diffuse reflectance spectroscopy (DRS). The UV-diffuse reflectance spectra of all the C, N, S-tridoped TiO₂ nanotubes greatly extended the absorption edge to the visible light region, and the absorbance in the visible region increased with increasing molar ratio of thiourea to Ti (R), which could be attributed to C, N, S-tridoping in the form of cation C-doping, interstitial N-doping, cation S-doping, and adsorbed ions’ states. The photocatalytic activity of C, N, S-tridoped TiO₂ nanotubes was evaluated by photocatalytic photodegradation of potassium ethyl xanthate (KEX) under visible light irradiation. It was found that the photocatalytic activity of the prepared samples increased with increasing molar ratio of thiourea to Ti (R). At R=6, the photocatalytic activity of the tridoped sample TNTS-6 reached a maximum value. With further increase in R, photocatalytic activity of the sample decreased, which could be attributed to the high visible light activity resulting from the balance between visible light absorption and recombination of electron/hole pairs.     

TiO2 nanoparticles with high ability for selective adsorption and photodegradation of textile dyes under visible light by feasible preparation

Particular TiO₂ nanoparticles with high selective photocatalytic oxidation of anionic dyes are prepared by a feasible hydrothermal method. Moreover, its photocatalytic selectivity can be easily switched to cationic dyes by a simple post-treatment in ammonia solution, which makes the prepared TiO₂ have bi-directional selectivity in dye photodegradation. Based on the photocatalytic performances and the structure and surface characteristics of the catalyst, the bi-directional selectivity of the catalysts is found to be closely related to the adsorption selectivity. The adsorption selectivity originates from surface charge groups, which are introduced during the preparation and post-treatment progresses. This study provides a facile and economical approach towards selective degradation of dyes with high efficiency by the special TiO₂ nanoparticles synthesized through a simple hydrothermal method, which may be used practically in the future.     

Morphology, structure and photocatalytic performance of ZnIn2S4 synthesized via a solvothermal/hydrothermal route in different solvents

Hexagonal ZnIn₂S₄ photocatalysts with different morphology and crystallinity (micro-structures) were prepared in aqueous-, methanol- and ethylene glycol-mediated conditions via a solvothermal/hydrothermal method. The aqueous- and methanol-mediated ZnIn₂S₄ presented to be Flowering-Cherry-like microsphere, while the ethylene glycol-mediated ZnIn₂S₄ presented to be micro-cluster. In comparison with two other products, aqueous-mediated ZnIn₂S₄ possessed the best crystallinity (micro-structure), which resulted in the highest photocatalytic activity for hydrogen evolution under visible-light irradiation. Additionally, aqueous-mediated ZnIn₂S₄ was found to be more stable than the other two ZnIn₂S₄ photocatalysts while undergoing the photocatalytic process. During the photocatalytic reaction, the average rates for hydrogen production over aqueous-, methanol- and ethylene glycol-mediated ZnIn₂S₄ were determined to be 27.3, 12.4 and 9.1 μmol h^-1, respectively, in the present photocatalytic systems.     

Structure determination, magnetic and optical properties of a new chromium(II) thioantimonate, [Cr((NH2CH2CH2)3N)]Sb4S7

The chromium(II) antimony(III) sulphide, [Cr((NH₂CH₂CH₂)₃N)]Sb₄S₇, was synthesised under solvothermal conditions from the reaction of Sb₂S₃, Cr and S dissolved in tris(2-aminoethyl)amine (tren) at 438 K. The products were characterised by single-crystal X-ray diffraction, elemental analysis, SQUID magnetometry and diffuse reflectance spectroscopy. The compound crystallises in the monoclinic space group P2₁/n with a=7.9756(7), b=10.5191(9), c=25.880(2) Å and β=90.864(5)°. Alternating SbS₃³⁻ trigonal pyramids and Sb₃S₆³⁻ semi-cubes generate Sb₄S₇²⁻ chains which are directly bonded to Cr(tren)²⁺ pendant units. The effective magnetic moment of 4.94(6)μ_B shows a negligible orbital contribution, in agreement with expectations for Cr(II):d⁴ in a ⁵A ground state. The measured band gap of 2.14(3) eV is consistent with a correlation between optical band gap and framework density that is established from analysis of a wide range of antimony sulphides.     

Surface segregation in yttria-stabilized zirconia by means of angle resolved X-ray photoelectron spectroscopy

Surface segregation of cations in undoped and titanium-doped yttria-stabilized zirconia was studied in air in the temperature range from 800 to 1400°C. Surface composition and distribution of the elements across the surface layer was examined using angle resolved X-ray photoelectron spectroscopy. The annealing procedure induced a silicon-rich surface layer of low zirconium concentration. The yttrium concentration only slightly increased at the surface. Enrichment factor of titanium in the titanium-doped yttria-stabilized zirconia was found to be higher than that of yttrium. No significant correlation between segregation of other cations was found.     

Surface modification of Cu metal particles by the chemical reaction between the surface oxide layer and a halogen surfactant

Surface oxides on small (2–5 μm) copper metal particles can be removed by chemical reaction with tris(2,3-dibromopropyl) isocyanurate (TIC) in diethylene glycol mono-n-hexyl ether (DGHE) solution under mild conditions where metal particles are not damaged. Surface oxides convert to copper bromide species and subsequently dissolve into the solvent. It was found that resultant surface species are resistant to re-oxidation due to remaining surface bromides. This finding opens up a possibility to create microclines based on cheap copper nanoparticles.     

IR operated novel Ag0.98Cu0.02GaGe3Se8 single crystals

In this work, we report on the structural and optical properties of novel Ag_0.98Cu_0.02GaGe₃Se₈ single crystals that were synthesized by the Bridgman–Stockbarger technique. We have performed illumination by 10.6 μm CO₂ pulsed laser working in the microsecond time duration regime. Such illumination allows causing substantial changes for both pure electronic nonlinear optical effects like optical second harmonic generation as well as piezooptical effects described by the fourth rank tensors. The measurements of the piezo-optical effects were carried out at different temperatures. The effects are observed only during the IR CO₂ laser illumination and are disappeared after switching off the illumination. Simultaneously the IR induced optical second harmonic generation at Er:glass laser fundamental wavelength 1540 nm was performed during illumination by nanosecond Nd:YAG and Er³⁺:glass laser. The observed effects allow to use the studied materials as promising for IR-optoelectronic devices.     

Preparation of nitrogen-doped titanium dioxide with visible-light photocatalytic activity using a facile hydrothermal method

Nitrogen-doped TiO₂ (N-TiO₂) nanoparticles have been successfully prepared via a direct and simple hydrothermal reaction of a commercial Degussa P25 with triethanol amine as solvent and nitrogen source. As-prepared N-TiO₂ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible light (UV-vis) absorption spectra, electron probe microanalysis (EPMA) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirm that hydrothermal reaction is an effective way to incorporate nitrogen into the TiO₂ lattice, especially nitrogen substitute for titanium. The nitrogen concentration in TiO₂ can be as high as 21% (molar ratio), which is described as Ti_1−yO_2−xN_x+y (in this paper, x=0.36, y=0.27, i.e., Ti_0.73O_1.64N_0.63). The chemical statuses of N have been assigned to N-Ti-O and O-N-O in the TiO₂ lattice as identified by XPS. Photocatalytic degradation of methyl orange has been carried out in both UV-vis (simulated solar light) and the visible region (λ>400 nm). N-TiO₂ exhibits higher activity than the Degussa P25 TiO₂ photocatalyst, particularly under visible-light irradiation. This study has developed a promising and practical pathway to new nitrogen-doped photocatalysts.     

Electronic structure and optical properties of BiSI crystal

Electronic structure and optical properties of BiSI crystal were investigated by the full potential linearized augmented plane wave (FL-LAPW) method with density functional theory (DFT). The complex dielectric function and optical constants, such as optical absorption coefficient, refractive index, extinction coefficient, energy-loss spectrum and reflectivity, were calculated. The optical properties of BiSI crystal were studied experimentally by spectroscopic ellipsometry. The experimental results were compared with the theoretical spectra of complex dielectric functions and with the spectra of a pseudo-dielectric function (PDF). This method shows that experimental spectra consist of four Laurence lines sum.     

Photoemission studies of Cu intercalated NbSe2

We report growth and angle resolved photoemission studies of Cu intercalated NbSe₂. Cu_xNbSe₂ with x=0, 0.04 and 0.08 were grown by iodine vapor transport method. Intercalation and doping was confirmed by the change in the c-axis lattice constant and the change in the electronic structure, respectively. To investigate the nesting condition, we performed auto-correlation analysis on the data. We find that the magnitude of the nesting vector decreases with doping but the direction remains unchanged. Our observation is consistent with the nesting coming from intra-pocket transition.     

Microhardness and fracture mechanics of flux grown samarium doped gadolinium vanadate (Sm:GdVO4) single crystal

Indentation induced hardness studies on flux grown samarium doped gadolinium vanadate (Sm:GdVO₄) crystals are reported. Mechanical characteristics including Vickers microhardness, fracture mechanics, crack propagation, brittleness index and yield strength are assessed. The mechanical behaviour of the crystal is explained using various theoretical models viz., Meyer’s law, proportional specimen resistance (PSR) and Hays and Kendall’s approach. Variation of microhardness with load is found to be non-linear and is best explained by the concept of Newtonian resistance pressure as proposed by Hays and Kendall’s law. Classification of cracks as median type is explained. The values of fracture toughness (K_c), brittleness index (B_i) and yield strength (σ_y) have also been calculated.