混合配体的铜(Ⅱ)配合［Cu(C2H4O2N)(C12H8N2)(H2O)］.ClO4.2.5H2O的合成、性质及晶体结构

本文对甘氨酸、1,10-邻菲咯啉铜(Ⅱ)固体配合物进行了合成和表征,并利用X射线分析研究了其晶体结构。     

一个含二茂铁基的镉配合物Cd(dppf)I2的合成和表征

The complex containing ferroceneyl, Cd(dppf)I₂(dppf=1,1-bis(diphenylphosphino) ferrocene), was syn-thesized and characterized by IR, Uv-vis DRIS spectrum and X-ray diffraction. The crystal belongs to monoclinic, space group C2/c, a=37.439(3)?, b=10.2472(6)?, c=18.719(1)?, β=110.4715(16)°, V=6727.8(8)?³, Z=8, D_c=1.818g·cm^-3, F(000)=3536, μ=3.015mm^-1, R=0.0308, wR=0.0692. dppf coor-dinates to Cd(Ⅱ) as bidentate ligand, and the coordination environment of Cd(Ⅱ) is a distorted tetrahedron. The electronic structures of Cd(dppf)I₂ and Cd(dppf)Br₂ are discussed by quantum chemistry calculation.     

新型一维链状配位聚合物[Cd2(C23H14O6)2(C10H9N3)2(H2O)]n的研究

配位超分子聚合物的设计合成与应用研究一直是配位化学、超分子化学、生物无机化学及材料科学等领域的热点研究课题之一,具有微孔结构的配位聚合物吸引了许多科学家的目光,这不仅因为该类配合物具有新颖的结构,展现出多种诱人的拓扑结构,更主要的 是因为它们在离子交换、催化、磁性材料、光学材料及气体贮存领域的应用潜力[1～3].     

二维网状配合物[Co(dimb)2(MeOH)2](ClO4)2的合成及晶体结构

设计并合成了一个含咪唑基团的柔性双齿配体:1,3-二(咪唑基-1′-甲基)-5-甲基苯(dimb)(1),并进行了 ¹H NMR和结构表征。通过dimb与高氯酸钴的反应,得到了一个新型的具有二维网状结构的配合物:[Co(dimb)₂(MeOH)₂](ClO₄)₂(2)。X-射线晶体结构测定表明,这两个化合物的晶体学参数分别为:配体(1)属单斜晶系, 空间群     

配合物[1-(4′-bromo-2′-fluorobenzyl)pyridinium]2[Ni(mnt)2]和[1-(4′-bromo-2′-fluorobenzyl)pyrazinium]2[Ni(mnt)2](mnt2-=maleonitriledithiolate dianion)的合成及晶体结构

本文报道两个含双(马来二氰基二硫烯)镍(Ⅱ)配合物阴离子的离子对化合物。对阳离子为1-(4′-溴-2′-氟苄基)吡啶 盐时,生成配合物1。晶体数据:三斜晶系,空间P1群,a=0.7086(2)nm,b=1.0968(3)nm,c=1.1775(3)nm,α=69.914(5)°,β=89.495(5)°,γ=74.765(5)°,V=0.8259(4)nm³,Z=1。对阳离子为1-(4′-溴-2′-氟苄基)吡嗪鎓盐时,生成配合物2。晶体数据:单斜晶系,空间群P2₁/n,a=0.71554(17)nm,b=1.4262(3)nm,c=1.6725(4)nm,β=100.396(4)°,V=1.6788(7)nm³,Z=4。两个配合物中,阴离子为拟平面结构,镍原子均位于对称中心。变换对阳离子上的芳环种类对晶体的堆积结构产生影响。     

一维链{[Mn2(2，2′-bipy)4(3，3′-tda)]·2ClO4}n配合物的合成、结构与磁性研究

由于柔性羧酸配体具有丰富多样的配位方式和灵活多变的分子结构,可以用来设计合成多种具有新颖结构和性质的配位聚合物,因而正逐渐引起研究者的关注[1-6].     

配合物{CuS2P（OCH2Ph）2[Fe（η^5-C5H4PPh2）2]}的合成和晶体结构

以二烷基二硫代磷酸亚铜和二茂铁基双膦配体为原料,二氯甲烷为溶剂合成了一个新颖的晶体化合物{CuS2P(OCH2Ph)2[Fe(η5-C5H4PPh2)2]}1。其结构通过IR,元素分析和X-射线单晶衍射法确定。化合物1中的铜原子与螯合配体dppf中的两个磷原子配位[Cu-P键长分别是2.2492(5)和2.2364(4)],并与dtp中的两个硫原子配位[Cu-S键长分别是2.4055(5)和2.4582(5)],中心铜原子形成扭曲的四面体构型。     

配合物Bi[S2P（OC6H4But-p）2]3的合成和晶体结构

合成了配合物Bi[S2P(OC6H4But-p)2]3,通过元素分析、红外光谱、紫外-可见光谱、热重分析和X-射线衍射法进行了结构表征。该晶体属于单斜晶系,C2/c空间群;晶胞参数为:a=30.907(5),b=12.7421(9),c=20.287(2),α=90.00°,β=120.925(18)°,γ=90.00°,V=6853.7(19)3,Dc=1.338g/cm3,Z=4,F(000)=2804,μ(Mo Kα)=2.869mm-1,S=1.062,(Δ/σ)max=0.001,R1=0.0621,wR2=0.1906(I>2σ(I))。晶体结构研究表明,配合物中的(p-ButC6H4O)2PS2-为双齿配体,Bi(III)原子与3个配体(p-ButC6H4O)2PS2-的6个S原子配位形成了畸变八面体构型,分子通过C3—H3…O3氢键形成了一维链状结构。     

锡(Ⅳ)N,N-二取代荒酸配合物Ph3SnS2CN(CH3)C6H5、 Ph3SnS2CN(C4H8NH)和SnCl2(S2CNEt2)2的合成、表征及晶体结构

Three tin (Ⅳ) complexes with N,N-dialkyl dithiocarbamates Ph₃SnS₂CN(CH₃)C₆H₅ (1),Ph₃SnS₂CN(C₄H₈NH) (2) and Sn(Cl)₂(S₂CNEt₂)₂ (3) have been synthesized. The crystal structures have been determined by X-ray sin- gle crystal diffraction. A crystal of the complex 1 is triclinic with space group P1, a=0.9485(3)nm, b=1.0491(3)nm, c=1.3631(4)nm, α=70.996(4)°, β=72.294(4)°, γ=79.609(4)°, Z=2, V=1.2168(6)nm³, D_c=1.453g·cm^-3, μ=1.234mm^-1, R=0.0442, wR=0.0858. A crystal of the complex 2 is monoclinic with space group P2(1)/c, a=1.2214(2)nm, b=1.1651(2)nm, c=1.5769(3)nm,β=99.039(2)°, Z=2, V=2.2162(7)nm³, D_c=1.532g·cm^-3, μ=1.352mm^-1, R=0.0267, wR=0.0591. A crystal of the complex 3 is triclinic with space group P1, a=0.7179(2)nm, b=0.9256(3)nm, c=1.5327(5)nm,α=93.857(4)°,β=98.992(4)°, γ=109.481(4)°, Z=2, V=0.9405(5)nm³, D_c=1.717g·cm^-3, μ=2.076mm^-1, R=0.0263, wR=0.0662. In the complexes 1 and 2 the tin atoms rendered five-coordination in a distorted tigonal bipyramidal structure and in the complex 3 the tin atom rendered six-coordination in a distorted octahedron structure. CCDC: 1, 179918; 2, 180024; 3, 180004.     

A2Ca[B4O5(OH)4]2·8H2O(A=Rb,Cs)硼氧酸盐复盐的合成与表征

硼氧酸盐晶体结构复杂，因此出现了许多具有特殊物理性能的晶体功能材料犤１，２犦，尤其是重稀碱金属硼氧酸盐（或复盐），如CsLiB６O１０犤３犦、LiRbB４O７犤４犦和CsB３O５（CBO）犤５犦都是非线性光学材料。一些学者对铷、铯的偏硼氧酸盐、四硼氧酸盐和五硼氧酸盐的合成、性质及晶体结构等进行过研究犤６～９犦。硼氧酸盐复盐，大多为碱金属和碱土金属、碱金属和碱金属及碱土金属和碱土金属的硼氧酸盐犤１０犦，如自然界存在的钠硼解石狖NaCa犤B５O６（OH）６犦·５H２O狚、硼钠镁石狖Na２Mg犤B６O８（OH）４犦２·６H２O…     

HBF4·OEt2 as a versatile reagent for the Hosomi-Sakurai allylation and Prins cyclization: one-pot synthesis of symmetrical 4-fluorotetrahydropyrans

The synthesis of symmetrical 2,6-disubstituted 4-fluorotetrahydropyran derivatives has been achieved using HBF₄·OEt₂ via a tandem allylation and Prins cyclization. This is a highly efficient and diastereoselective approach for the preparation of 4-fluorotetrahydropyrans in a single step. The use of readily available and easy to handle reagent HBF₄·OEt₂ makes this method simple, convenient and practical.     

HBF4·OEt2 as a mild and versatile reagent for the Ritter amidation of olefins: a facile synthesis of secondary amides

A variety of alkenes undergo smooth amidation with nitriles in the presence of HBF₄·OEt₂ at room temperature under mild conditions to afford the corresponding secondary amides in good to excellent yields. This is a highly efficient method for the preparation of α-aryl ethyl amides especially from vinyl arenes without any side reactions such as olefin polymerization. The use of readily available and easy to handle reagent HBF₄·OEt₂ makes this method simple, convenient, and practical.     

Mn-Na2WO4/SiO2催化剂表面活性中心结构的DFT研究

Mn Na2WO4/SiO2 is one of the best catalysts for oxidative coupling of methane.To investigate the nature of active centers and the reaction mechanism,the structure of possible metal sites formed by tungsten and manganese over the silica surface were studied using molecular simulation method and ab initio DFT calculations.Silica support exists in the catalyst as 岐瞔ristobalite and its (111) face exposes preferentially to the surface.The calculated results show that tungsten interacts with the silica surface by three or one bridge oxygen atoms to form tetrahedral [WO4],and manganese interacts with single bridge oxygen to form dispersed [MnO4] or exists as oxide clusters.The nature of the molecular orbitals and the electronic structure suggest that the tetrahedral [WO4] site with single bridge oxygen is the most probable active center responsible for methane activation.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

可见光响应的Co3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag₃PO₄纳米颗粒、磷酸钴（Co₃（PO₄）₂,CoP）纳米片以及它们两者的纳米复合结构（CoP/Ag₃PO₄）,同时还比较了它们的可见光催化活性. 采用场发射扫描电镜（FESEM）、X 射线衍射（XRD）、紫外-可见（UV-Vis）吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征. 结果表明,CoP/Ag₃PO₄复合纳米结构的可见光降解甲基橙（MO）的速率和循环稳定性均明显优于其它两种物质. 这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴. 此外,我们还发现CoP/Ag₃PO₄降解另一种阳离子型染料——罗丹明B（RhB）的能力则远不如纯Ag₃PO₄,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力. 本文提供了一种廉价制备高效可见光催化剂的新方法.     

MgAl2O4尖晶石对锂离子电池正极材料LiMn2O4的循环性能影响研究

MgAl₂O₄ spinel doping into cathode materials LiMn₂O₄ was used to improve the cyclic performance of the cathode. X-ray analysis results showed, when MgAl₂O₄ precursors were mixed with LiMn₂O₄ and sintered at 770 ℃ for 12 hour, MgAl₂O₄-LiMn₂O₄ mulriple spinel with the same physical characteristics as pure LiMn₂O₄ were synthesized. The electro-chemical performance testing showed, comparing with pure LiMn₂O₄, the first charge-discharge capacity of doping materials somewhat reduced, but the cyclic performance improved. The mechanism for doping material was also discussed.     

g-C3N4/CeO2异质结材料的制备及其光催化性能的研究

以三聚氰胺、硝酸铈为原料,通过高温煅烧法制备了不同CeO₂含量的片层状g-C₃N₄/CeO₂,通过XRD、FT-IR、XPS等对系列g-C₃N₄-CeO₂材料进行了表征,考察了材料在可见光(λ≥420nm)条件下降解盐酸四环素(TC)的光催化活性。与单纯的g-C₃N₄相比,g-C₃N₄/CeO₂-30%具有更优异的光催化性能,这是由于g-C₃N₄-CeO₂间的异质结作用促进了光生电子和空穴分离。自由基捕获实验证实·O^-₂在催化反应过程中起到主要作用,并提出了相应的光催化机理。     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

高质量Cu2ZnSnS4纳米晶的合成及其自组装行为的研究

本文以简单的无机盐,包括醋酸铜、醋酸锌、四氯化锡为原料,以硬脂酸和硬脂胺作为保护剂,以二苯醚作为溶剂,采用高温热注射的方法,合成出了高质量的具有自组装行为的Cu₂ZnSnS₄纳米晶,并详细研究了酸和胺对于纳米晶形貌的影响。研究结果表明,随着硬脂酸用量的增加,Cu₂ZnSnS₄纳米晶的尺寸逐渐变大,并且呈现出具有多个棱角的复杂结构。此方法制备的Cu₂ZnSnS₄纳米晶对于紫外和可见光区均有很强的吸收,是构筑高效、低耗的薄膜太阳能电池的理想材料。