Interconversion of stannylium ions in the C<Subscript>4</Subscript>H<Subscript>11</Subscript>Sn<Superscript>+</Superscript> system

B3LYP method with the LANL2DZ basis for tin and aug-cc-pVDZ basis for carbon and hydrogen were used to obtain the equilibrium geometry of the main (with a positive charge on the tin) isomers in the C₄H₁₁Sn⁺ system and the transition states at their interconversion. As in the case of silicon and germanium, the cations of lighter elements of the 14th group, the most stable isomer is shown to be the tertiary ion, however, the energy of its complexes with ethane and propane is higher only by several kJ mol⁻¹. Nevertheless, the formation of these complexes from the tertiary ion requires overcoming a rather high barrier (293 and 272 kJ mol⁻¹, respectively). The barrier for isomerization of the secondary ion in the ethane complex is somewhat lower (222 kJ mol⁻¹), but still is significantly greater than the energy gained at the appearance of the nucleogenic ion. The most probable transformation pathways of the nucleogenic stannylium ions are the formation of complexes with ethylene, which requires overcoming barriers of 130 and 117 kJ mol⁻¹ for the tertiary and secondary ions, respectively.     

Calculations of thermodynamic stability of CpCoC<Subscript>2</Subscript>B<Subscript>9</Subscript>H<Subscript>11</Subscript> cobaltacarborane isomers

Quantum-chemical calculations of the geometry and energies of nine possible isomers of 12-vertex cobaltacarborane CpCoC₂B₉H₁₁ (1) were carried out by the DFT method (PBEPBE/DGDZVP/DGA1). Thermodynamic stability of the isomers increases with increasing distance between the carbon atoms in the cage and is virtually independent of the position of the CpCo vertex. The relative stabilities of the 1,2,3-(17.57 kcal mol⁻¹), 1,2,4-(3.72 kcal mol⁻¹), and 1,2,9-isomers of 1 (0 kcal mol⁻¹) are similar to the corresponding values for the ortho (17.61 kcal mol⁻¹), meta (3.21 kcal mol⁻¹), and para isomers (0 kcal mol⁻¹) of carborane C₂B₁₀H₁₂. The results of the present study confirm a close similarity of the CpCo and BH fragments in metallacarborane chemistry. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1557–1559, July, 2005.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Synthesis of pyridyl derivatives for the future functionalization of biomolecules labeled with the fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> precursor

In this paper, we investigated three ligand systems, symmetric and asymmetric pyridyl-containing tridentate ligands (L¹NH₂ = (bis(2-pyridylmethyl)-amino)-ethylamine, L²H = (bis(2-pyridylmethyl)-amino)-acetic acid, L³NH₂ = [(6-amino-hexyl)-pyridyl-2-methyl-amino]-acetic acid) as bifunctional chelating agents for labeling biomolecules. These ligands reacted with the precursor fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and yielded the radioactive complexes fac-[¹⁸⁸Re(CO)₃L] (L = three ligands), which were identified by RP-HPLC. The corresponding stable rhenium tricarbonyl complexes (1–3) were allowed for macroscopic identification of the radiochemical compounds. ¹⁸⁸Re tricarbonyl complexes, with log P _o/w values ranging from −1.36 to −0.32, were obtained with yields of ≥90% using ligand concentrations within the 10⁻⁶−10⁻⁴M range. Challenge studies with cysteine and histidine revealed the high stability properties of these radioactive complexes, and biodistribution studies in normal mice indicated a fast rate of blood clearance and high rate of total radioactivity excretion, primarily through the renal-urinary pathway. In summary, these asymmetric and symmetric pyridyl-containing tridentate ligands are potent bifunctional chelators for the future biomolecules labeling of fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺.     

Composition of the gas phase over Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and the enthalpies of atomization of AlO,Al<Subscript>2</Subscript>O,and Al<Subscript>2</Subscript>O<Subscript>2</Subscript>

The A1, O, AlO, A1₂O, Al₂O₂, WO₂, and WO₃, partial pressures in the vapor over Al₂O₃ in a tungsten Knudsen effusion cell between 2300 and 2600 K were derived from A1⁺, O⁺, AlO⁺, A1₂O⁺, Al₂O₂⁺, WO₂⁺, and WO₃⁺, ion intensities. The mass spectrometer was calibrated against the equilibrium constant of the WO₃(g) = WO₂(g) + O(g) reaction. Refined values of the ionization cross sections of AlO and A1₂O₂ were used in the partial pressure calculations. The enthalpies of atomization of aluminum suboxides were determined to be Δ_at H ^o(AlO, g, 0) = 510.7 ± 3.3 kJ mol⁻¹, Δ_at H ^o(Al₂O, g, 0) = 1067.2 ± 6.9 kJ mol⁻¹, and Δ_at H ^o(Al₂O₂, g, 0) = 1556.7 ± 9.9 kJ mol⁻¹.     

Molecular modeling of hydration properties of hydrophobic ions Li<Superscript>+</Superscript>@C<Subscript>60</Subscript> and K<Superscript>+</Superscript>@C<Subscript>60</Subscript>

The Gibbs free energies of solvation (ΔG _s) and the electronic structures of endohedral metallofullerenes M⁺@C₆₀ (M⁺= Li⁺, K⁺) were calculated within the framework of the density functional theory and the polarizable continuum model. In water environment, the equilibrium position of K⁺ is at the center of the fullerene cavity whereas that of Li⁺ is shifted by 0.14 nm toward the fullerene cage. The Li⁺ cation is stabilized by interactions with both the fullerene and solvent. The equilibrium structures of both endohedral metallofullerenes are characterized by very close ΔG _s values. In particular, the calculated ΔG _s values for K⁺@C₆₀ are in the range from −124 to −149 kJ mol⁻¹ depending on the basis set and on the type of the density functional. Molecular dynamics simulations (TIP3P H₂O, OPLS force field, water sphere of radius 1.9 nm) showed that the radial distribution functions of water density around C₆₀ and M⁺@C₆₀ are very similar, whereas orientations of water dipoles around the endohedral metallofullerenes resemble the hydration pattern of isolated metal ions.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

Functionalization of one or two methyl groups in the [Cp*<Subscript>2</Subscript>RuBr]<Superscript>+</Superscript>Br<Superscript>−</Superscript> complex in the reaction with bromine

The reaction of [Cp*₂RuBr]⁺Br⁻ with bromine in CH₂Cl₂ (CD₂Cl₂) in an inert atmosphere at room temperature produces the complexes [Cp*Ru(Br)C₅Me₄CH₂Br]⁺Br₃ ⁻ (syn conformer), [Cp*Ru(Br)C₅Me₃(CH₂Br)₂]⁺ (syn and anti conformers), and [Ru(Br)(C₅Me₄CH₂Br)₂]⁺ (syn conformer). All complexes were characterized by ¹H and ¹³C NMR spectroscopy; the former complex, by elemental analysis. These complexes were also prepared by the reaction of [Cp*RuC₅Me₄CH₂]⁺BF₄ ⁻ with bromine in CH₂Cl₂. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2712–2718, December, 2005.     

Solubility and hydrolysis of lutetium at different [Lu<Superscript>3+</Superscript>]<Subscript>initial</Subscript>

Solubility product (Lu(OH)_3(s)⇆Lu³⁺+3OH⁻) and first hydrolysis (Lu³⁺+H₂O⇆Lu(OH)²⁺+H⁺) constants were determined for an initial lutetium concentration range from 3.72·10⁻⁵ mol·dm⁻³ to 2.09·10⁻³ mol·dm⁻³. Measurements were made in 2 mol·dm⁻³ NaClO₄ ionic strength, under CO₂-free conditions and temperature was controlled at 303 K. Solubility diagrams (pLu_aq vs. pC _H) were determined by means of a radiochemical method using ¹⁷⁷Lu. The pC _H for the beginning of precipitation and solubility product constant were determined from these diagrams and both the first hydrolysis and solubility product constants were calculated by fitting the diagrams to the solubility equation. The pC _H values of precipitation increases inversely to [Lu³⁺]_initial and the values for the first hydrolysis and solubility product constants were log₁₀ β* _Lu,H = −7.92±0.07 and log₁₀ K*_sp,Lu(OH)3 = −23.37±0.14. Individual solubility values for pC _H range between the beginning of precipitation and 8.5 were S _Lu3+ = 3.5·10⁻⁷ mol·dm⁻³, S _Lu(OH)2+ = 6.2·10⁻⁷ mol·dm⁻³, and then total solubility was 9.7·10⁻⁷ mol·dm⁻³.     

Electronic spectra of C<Subscript>6</Subscript>H<Superscript>+</Superscript> and C<Subscript>6</Subscript>H<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> in the gas phase

Measurement of the ³Π-³Π transition of C₆H⁺ in the gas phase near 19486 cm⁻¹ is reported. The experiment was carried out with a supersonic slit-jet expansion discharge using cavity ringdown absorption spectroscopy. Partly resolved P lines and observation of band heads permitted a rotational contour fit. Spectroscopic constants in the ground and excited-state were determined. The density of ions being sampled is merely 2×10⁸ cm⁻³. Broadening of the spectral lines indicates the excited-state lifetime to be ≈100 ps. The electronic transition of HC₆H₂⁺ at 26402 cm⁻¹ assumed to be ¹A₁-X¹A₁ in C_2v symmetry could not be rotationally resolved.     

Investigation into the formation of heteronuclear clusters of formula [{Ru<Subscript>6</Subscript>C(CO)<Subscript>16</Subscript>Ag<Subscript>2</Subscript>X}<Subscript>2</Subscript>]<Superscript>2−</Superscript> (X = Cl,Br or I)

Reaction of [Ru₆C(CO)₁₆]²⁻ with an excess of AgX (X = Cl, Br or I) affords heteronuclear clusters of formula [{Ru₆C(CO)₁₆Ag₂X}₂]²⁻ in 80% yield, which for X = I and X = Br/Cl were crystallographically characterised. The formation of the cluster was followed in solution using electrospray ionisation mass spectrometry (ESI-MS), which revealed the presence of a wide range of clusters with the general formula [{Ru₆C(CO)₁₆} _x Ag _y X _z ]^{(2x−y+z)−} where x = 1 or 2, y = 1, 2, 3 or 4 and z = 0, 1 or 2. The high yield of the product despite the evident complicated solution speciation is attributed to selective crystallisation of the observed compound driving the equilibrium toward this product.     

Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.     

Thermochemical properties of MnNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Homogeneous manganocolumbite (MnNb₂O₆) was synthesized from Nb₂O₅ and MnO oxides. Powder sample was orthorhombic with unit cell parameters: α = 0.5766 nm, b = 1.4439 nm, c = 0.5085 nm and V = 0.4234 nm³. Heat capacity over the temperature range of 313–1253 K was measured in an inert atmosphere with combined thermogravimetry and calorimetry using NETZSCH STA 449C Jupiter thermoanalyzer. Melting point was 1767 ± 3 K, enthalpy of melting was 144 ± 4 kJ mol⁻¹. Experimental heat capacity of MnNb₂O₆ is fitted to polynomial C _pm = 221.46 + 3.03 · 10⁻³ T + −39.79 · 10⁵ T ⁻² + 40.59 · 10⁻⁶ T ².     

Thermodynamic properties of strontium metaniobate SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

The heat capacity and the enthalpy increments of strontium metaniobate SrNb₂O₆ were measured by the relaxation method (2-276 K), micro DSC calorimetry (260-320 K) and drop calorimetry (723-1472 K). Temperature dependence of the molar heat capacity in the form C _pm=(200.47±5.51)+(0.02937±0.0760)T-(3.4728±0.3115)·10⁶/T ² J K⁻¹ mol⁻¹ (298-1500 K) was derived by the least-squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m⁰ (298.15 K)=173.88±0.39 J K⁻¹ mol⁻¹ was evaluated from the low temperature heat capacity measurements. The standard enthalpy of formation Δ_f H ⁰ (298.15 K)=-2826.78 kJ mol⁻¹ was derived from total energies obtained by full potential LAPW electronic structure calculations within density functional theory.     

Effects of La<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> on outward potassium channels in Vicia guard cells

Effects of La³⁺ and Eu³⁺ on outward potassium channels (K_out⁺) in Vicia guard cells have been studied by patch clamping technique. Extracellular La³⁺ inhibited K_out⁺ currents with a half-inhibition concentration (IC₅₀) of 81 μmol·L⁻¹. Interestingly, intracellular La³⁺ activated K_out⁺ currents at a free concentration of 1.13 × 10⁻¹⁴ mol·L⁻¹, and inhibited K_out⁺ currents at a free concentration of 5.86 × 10⁻¹⁴ mol·L⁻¹. Extracellular Eu³⁺ also activated K_out⁺ currents at concentrations of 10 μmol·L⁻¹ and 50 μmol·L⁻¹, and inhibited K_out⁺ currents at concentrations of more than 1 mmol·L⁻¹. The effects of La³⁺ and Eu³⁺ on K_out⁺ currents may contribute to regulation of the plant water status, which may be one of the mechanisms of the biological effect of rare earth elements.     

Theoretical study of the mechanism for C-H bond activation in spin-forbidden reaction between Ti<Superscript>+</Superscript> and C<Subscript>2</Subscript>H<Subscript>4</Subscript>

The mechanism of the spin-forbidden reaction Ti⁺(⁴F, 3d²4s¹) + C₂H₄→TiC₂H₂ ⁺ (²A₂) + H₂ on both doublet and quartet potential energy surfaces has been investigated at the B3LYP level of theory. Crossing points between the potential energy surfaces and the possible spin inversion process are discussed by means of spin-orbit coupling (SOC) calculations. The strength of the SOC between the low-lying quartet state and the doublet state is 59.3 cm⁻¹ in the intermediate complex IM1-⁴B₂. Thus, the changes of its spin multiplicity may occur from the quartet to the doublet surface to form IM1-²A₁, leading to a sig-nificant decrease in the barrier height on the quartet PES. After the insertion intermediate IM2, two distinct reaction paths on the doublet PES have been found, i.e., a stepwise path and a concerted path. The latter is found to be the lowest energy path on the doublet PES to exothermic TiC₂H₂ ⁺(²A₂) + H₂ products, with the active barrier of 4.52 kcal/mol. In other words, this reaction proceeds in the following way: Ti⁺+C₂H₄→⁴IC→IM1-⁴B₂→^4,2ISC→IM1-²A₁→[²TS_ins]→IM2→[²TS_MCTS]→IM5→TiC₂H₂ ⁺(²A₂)+H₂. Supported by ‘Qinglan’ Talent Engineering Funds by Tianshui Normal University.     

Isomerism in OBe3F3 + cation: anab initio study

Ab initio MP2/6-31G^*//HF/6-31G^*+ZPE(HF/6-31G^*) calculations of the potential energy surface in the vicinity of stationary points and the pathways of intramolecular rearrangements between low-lying structures of the OBe₃F₃ ⁺ cation detected in the mass spectra of μ₄-Be₄O(CF₃COO)₆ were carried out. Ten stable isomers with di- and tricoordinate oxygen atoms were localized. The relative energies of six structures lie in the range 0–8 kcal mol⁻¹ and those of the remaining four structures lie in the range 20–40 kcal mol⁻¹. Two most favorable isomers, aC _2v isomer with a dicoordinate oxygen atom, planar six-membered cycle, and one terminal fluorine atom and a pyramidalC _3v isomer with a tricoordinate oxygen atom and three bridging fluorine atoms, are almost degenerate in energy. The barriers to rearrangements with the breaking of one fluorine bridge are no higher than 4 kcal mol⁻¹, except for the pyramidalC _3v isomer (∼16 kcal mol⁻¹). On the contrary, rearrangements with the breaking of the O−Be bond occur with overcoming of a high energy barrier (∼24 kcal mol⁻¹). A planarD _3h isomer with a tricoordinate oxygen atom and linear O−Be−H fragments was found to be the most favorable for the OBe₃H₃ ⁺ cation, a hydride analog of the OBe₃F₃ ⁺ ion; the energies of the remaining five isomers are more than 25 kcal mol⁻¹ higher. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 420–430, March, 1999.     

PuPO<Subscript>4</Subscript>(cr,hyd.) Solubility Product and Pu<Superscript>3+</Superscript> Complexes with Phosphate and Ethylenediaminetetraacetic Acid

To determine the solubility product of PuPO₄(cr, hyd.) and the complexation constants of Pu(III) with phosphate and EDTA, the solubility of PuPO₄(cr, hyd.) was investigated as a function of: (1) time and pH (varied from 1.0 to 12.0), and at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration; (2) NaH₂PO₄ concentrations varying from 0.0001 mol⋅L⁻¹ to 1.0 mol⋅L⁻¹ and at a fixed pH of 2.5; (3) time and pH (varied from 1.3 to 13.0) at fixed concentrations of 0.00032 mol⋅L⁻¹ phosphate and 0.0004 mol⋅L⁻¹ or 0.002 mol⋅L⁻¹ Na₂H₂EDTA; and (4) Na₂H₂EDTA concentrations varying from 0.00005 mol⋅L⁻¹ to 0.0256 mol⋅L⁻¹ at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration and at pH values of approximately 3.5, 10.6, and 12.6. A combination of solvent extraction and spectrophotometric techniques confirmed that the use of hydroquinone and Na₂S₂O₄ helped maintain the Pu as Pu(III). The solubility data were interpreted using the Pitzer and SIT models, and both provided similar values for the solubility product of PuPO₄(cr, hyd.) and for the formation constant of PuEDTA⁻. The log ₁₀ of the solubility product of PuPO₄(cr, hyd.) [PuPO₄(cr, hyd.) \rightleftarrows\rightleftarrows Pu³⁺+PO₄^3-\mathrm{Pu}^{3+}+\mathrm{PO}_{4}^{3-}] was determined to be −(24.42±0.38). Pitzer modeling showed that phosphate interactions with Pu³⁺ were extremely weak and did not require any phosphate complexes [e.g., PuPO₄(aq), PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+}, Pu(H₂PO₄)₂⁺\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{2}^{+}, Pu(H₂PO₄)₃(aq), and Pu(H₂PO₄)₄^-\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{4}^{-}] as proposed in existing literature, to explain the experimental solubility data. SIT modeling, however, required the inclusion of PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+} to explain the data in high NaH₂PO₄ concentrations; this illustrates the differences one can expect when using these two different chemical models to interpret the data. Of the Pu(III)-EDTA species, only PuEDTA⁻ was needed to interpret the experimental data over a large range of pH values (1.3–12.9) and EDTA concentrations (0.00005–0.256 mol⋅L⁻¹). Calculations based on density functional theory support the existence of PuEDTA⁻ (with prospective stoichiometry as Pu(OH₂)₃EDTA⁻) as the chemically and structurally stable species. The log ₁₀ value of the complexation constant for the formation of PuEDTA⁻ [ Pu³⁺+EDTA^4-\rightleftarrows PuEDTA^-\mathrm{Pu}^{3+}+\mathrm{EDTA}^{4-}\rightleftarrows \mathrm{PuEDTA}^{-}] determined in this study is −20.15±0.59. The data also showed that PuHEDTA(aq), Pu(EDTA)₄^5-\mathrm{Pu(EDTA)}_{4}^{5-}, Pu(EDTA)(HEDTA)⁴⁻, Pu(EDTA)(H₂EDTA)³⁻, and Pu(EDTA)(H₃EDTA)²⁻, although reported in the literature, have no region of dominance in the experimental range of variables investigated in this study.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Standard molar enthalpies of formation of [RE(Gly)<Subscript>4</Subscript>(Im)(H<Subscript>2</Subscript>O)](ClO<Subscript>4</Subscript>)<Subscript>3</Subscript> (<Emphasis Type="Italic">RE</Emphasis>=Eu,Sm)

The two complexes, [RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)(RE = Eu, Sm), have been synthesized and characterized. The standard molar enthalpies of reaction for the following reactions, RECl₃·6H₂O(s)+4Gly(s)+Im(s)+3NaClO₄(s) = =[RE(Gly)₄(Im)(H₂O)](ClO₄)₃(s)+3NaCl(s)+5H₂O(l), were determined by solution-reaction colorimetry. The standard molar enthalpies of formation of the two complexes at T = 298.15 K were derived as Δ_f H _m^Θ {Eu(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = = −(3396.6±2.3) kJ mol⁻¹ and Δ_f H _m^Θ {Sm(Gly)₄(Im)(H₂O)}(ClO₄)₃(s)} = −(3472.7±2.3) kJ mol⁻¹, respectively.