Green synthesis of halogenated thiophenes,selenophenes and benzo[b]selenophenes using sodium halides as a source of electrophilic halogens

Herein, we report the first synthesis of chlorinated benzo[b]selenophenes via environmentally friendly electrophilic chlorocyclization reaction using “table salt” as a source of “electrophilic chlorine” and ethanol as a solvent. In addition, the synthesis of diverse halogenated heterocycles, including 3-chloro, 3-bromo and 3-iodo thiophenes, selenophenes, and benzo[b]selenophenes was successfully accomplished under the same environmentally benign reaction conditions. This methodology has several advantages over other previously reported reactions as it employs simple starting compounds, an environmentally friendly solvent, ethanol, and non-toxic inorganic reagents under mild reaction conditions, resulting in the high product yields.     

Application of Deep Eutectic Solvents in the Synthesis of Substituted 2-Mercaptoquinazolin-4(3H)-Ones: A Comparison of Selected Green Chemistry Methods

In this study, deep eutectic solvents (DESs) were used as green and eco-friendly media for the synthesis of substituted 2-mercaptoquinazolin-4(3H)-ones from different anthranilic acids and aliphatic or aromatic isothiocyanates. A model reaction on anthranilic acid and phenyl isothiocyanate was performed in 20 choline chloride-based DESs at 80 °C to find the best solvent. Based on the product yield, choline chloride:urea (1:2) DES was found to be the most effective, while DESs acted both as solvents and catalysts. Desired compounds were prepared with moderate to good yields using stirring, microwave-assisted, and ultrasound-assisted synthesis. Significantly, higher yields were obtained with mixing and ultrasonication (16–76%), while microwave-induced synthesis showed lower effectiveness (13–49%). The specific contribution of this research is the use of DESs in combination with the above-mentioned green techniques for the synthesis of a wide range of derivatives. The structures of the synthesized compounds were confirmed by ¹H and ¹³C NMR spectroscopy.     

Synthesis of a new chiral nitrogen containing diselenide as a precursor for selenium electrophiles

The synthesis of a new chiral nitrogen containing diselenide is described starting from (1S,2S)-1,2-diphenylethylendiamine. The electrophilic selenium species generated from this diselenide have been used for methoxyselenenylation reactions at room temperature with good yields and high diasteroselectivities.     

Solubility Determination of c-Met Inhibitor in Solvent Mixtures and Mathematical Modeling to Develop Nanosuspension Formulation

The solubility and dissolution thermodynamics of new c-Met inhibitor, ABN401, were determined in eleven solvents and Transcutol^® HP–water mixture (TWM) from 298.15 to 318.15 K. The experimental solubilities were validated using five mathematical models, namely modified Apelblat, van’t Hoff, Buchowski–Ksiazaczak λh, Yalkowsky, and Jouyban–Acree van’t Hoff models. The experimental results were correlated and utilized further to investigate the feasibility of nanosuspension formation using liquid anti-solvent precipitation. Thermodynamic solubility of ABN401 increased significantly with the increase in temperature and maximum solubility was obtained with Transcutol^® HP while low solubility in was obtained water. An activity coefficient study indicated that high molecular interaction was observed in ABN401–Transcutol^® HP (THP). The solubility increased proportionately as the mole fraction of Transcutol^® HP increased in TWM, which was also supported by a solvent effect study. The result suggested endothermic and entropy-driven dissolution. Based on the solubility, nanosuspension was designed with Transcutol^® HP as solvent, and water as anti-solvent. The mean particle size of nanosuspension decreased to 43.05 nm when the mole fraction of ABN401 in THP, and mole fraction of ABN401 in TWM mixture were decreased to 0.04 and 0.1. The ultrasonicated nanosuspension appeared to give comparatively higher dissolution than micronized nanosuspension and provide a candidate formulation for in vivo purposes.     

Synthesis of Novel N-Acylhydrazones and Their C-N/N-N Bond Conformational Characterization by NMR Spectroscopy

In this article, a synthesis of N’-(benzylidene)-2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetohydrazides and their structural interpretation by NMR experiments is described in an attempt to explain the duplication of some peaks in their ¹H- and ¹³C-NMR spectra. Twenty new 6-methyl-1H-pyrazolo[3,4-b]quinoline substituted N-acylhydrazones 6(a–t) were synthesized from 2-chloro-6-methylquinoline-3-carbaldehyde (1) in four steps. 2-Chloro-6-methylquinoline-3-carbaldehyde (1) afforded 6-methyl-1H-pyrazolo[3,4-b]quinoline (2), which upon N-alkylation yielded 2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetate (3). The hydrazinolysis of 3 followed by the condensation of resulting 2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetohydrazide (4) with aromatic aldehydes gave N-acylhydrazones 6(a–t). Structures of the synthesized compounds were established by readily available techniques such as FT-IR, NMR and mass spectral studies. The stereochemical behavior of 6(a–t) was studied in dimethyl sulfoxide-d₆ solvent by means of ¹H NMR and ¹³C NMR techniques at room temperature. NMR spectra revealed the presence of N’-(benzylidene)-2-(6-methyl-1H-pyrazolo[3,4-b]quinolin-1-yl)acetohydrazides as a mixture of two conformers, i.e., E_(C=N)(N-N) synperiplanar and E_(C=N)(N-N) antiperiplanar at room temperature in DMSO-d₆. The ratio of both conformers was also calculated and E_{(C=N) (N-N)} syn-periplanar conformer was established to be in higher percentage in equilibrium with the E_{(C=N) (N-N)} anti-periplanar form.     

Two dimensional inorganic electride-promoted electron transfer efficiency in transfer hydrogenation of alkynes and alkenes

A simple and highly efficient transfer hydrogenation of alkynes and alkenes by using a two-dimensional electride, dicalcium nitride ([Ca₂N]⁺·e^–), as an electron transfer agent is disclosed. Excellent yields in the transformation are attributed to the remarkable electron transfer efficiency in the electride-mediated reactions. It is clarified that an effective discharge of electrons from the [Ca₂N]⁺·e^– electride in alcoholic solvents is achieved by the decomposition of the electride via alcoholysis and the generation of ammonia and Ca(OⁱPr)₂. We found that the choice of solvent was crucial for enhancing the electron transfer efficiency, and a maximum efficiency of 80% was achieved by using a DMF mixed isopropanol co-solvent system. This is the highest value reported to date among single electron transfer agents in the reduction of C–C multiple bonds. The observed reactivity and efficiency establish that electrides with a high density of anionic electrons can readily participate in the reduction of organic functional groups.     

Asymmetric selenomethoxylation of alkenes with camphorselenenyl sulfate

By reaction with ammonium persulfate the easily available diselenide derived from (1R)-(+)-camphor was converted into the camphorselenenyl sulfate. This chiral electrophilic selenium reagent reacted at room temperature with alkenes in the presence of methanol to afford selenomethoxylated adducts in good yields and with moderate to good facial selectivity. The two diastereomeric addition products could be separated in most cases.     

Cobalt diselenide nanobelts grafted on carbon fiber felt: an efficient and robust 3D cathode for hydrogen production

Design and fabrication of low-cost, highly efficient and robust three-dimensional (3D) hierarchical structure materials for electrochemical reduction of water to make molecular hydrogen is of paramount importance for real water splitting applications. Herein, a 3D hydrogen evolution cathode constructed by in situ growing of cobalt diselenide nanobelts on the surface of commercial carbon fiber felt shows exceptionally high catalytic activity with 141 mV overpotential to afford a current density of 10 mA cm^–2, and a high exchange current density of 5.9 × 10^–2 mA cm^–2. Remarkably, it also exhibits excellent catalytic stability, and could be used for more than 30 000 potential cycles with no decrease in the current density in 0.5 M H₂SO₄. This easily prepared 3D material with excellent electrocatalytic performance is promising as a realistic hydrogen evolution electrode.     

Preparation of a new chiral non-racemic sulfur-containing diselenide and applications in asymmetric synthesis

The synthesis of the new chiral non-racemic sulfur-containing diselenide, di-2-methoxy-6-[(1S)-1-(methylthio)ethyl]phenyl diselenide, is described. When treated with ammonium persulfate this diselenide is transformed into the corresponding selenenyl sulfate, which acts as a strong electrophilic reagent and adds to alkenes, in the presence of methanol or water, to afford the products of selenomethoxylation or selenohydroxylation, respectively, with excellent diastereoselectivities. Starting from alkenes containing internal nucleophiles, asymmetric cyclofunctionalization reactions also resulted in good chemical yields, complete regioselectivities, and high diastereoselectivities. This sulfur-containing diselenide can also be used in catalytic amounts to promote one-pot selenenylation-deselenenylation processes, from which several types of products can be obtained in high yield and with good enantiomeric excess.     

Cyclodehydration of cis-2-butene-1,4-diol with active methylene compounds catalyzed by a diphosphinidenecyclobutene-coordinated palladium complex

(π-Allyl)palladium triflate coordinated with 1,2-bis(4-methoxyphenyl)-3,4-bis(2,4,6-tri-t-butylphenylphosphinidene)cyclobutene (DPCB-OMe), [Pd(η³-C₃H₅)(DPCB-OMe)]OTf, efficiently catalyzes cyclodehydration of cis-2-butene-1,4-diol with active methylene compounds such as acetylacetone and ethyl acetoacetate in toluene in the presence of pyridine. The reactions can be performed in air, giving 2-vinyl-2,3-dihydrofurans in good to high yields.     

Synthesis of 3-Aryl-3-(Furan-2-yl)Propanoic Acid Derivatives,and Study of Their Antimicrobial Activity

Reactions of 3-(furan-2-yl)propenoic acids and their esters with arenes in Brønsted superacid TfOH affords products of hydroarylation of the carbon–carbon double bond, 3-aryl-3-(furan-2-yl)propenoic acid derivatives. According to NMR and DFT studies, the corresponding O,C-diprotonated forms of the starting furan acids and esters should be reactive electrophilic species in these transformations. Starting compounds and their hydroarylation products, at a concentration of 64 µg/mL, demonstrate good antimicrobial activity against yeast-like fungi Candida albicans. Apart from that, these compounds suppress Escherichia coli and Staphylococcus aureus.     

Efficient asymmetric selenocyclizations of alkenyl oximes into cyclic nitrones and 1,2-oxazines promoted by sulfur containing diselenides

Treatment of the di-2-[(1S)-1-(methylthio)ethyl]phenyl diselenide or of the di-2-methoxy-6-[(1S)-1-methylthio)ethyl]phenyl diselenide with bromine and silver triflate afforded the corresponding electrophilic selenylating triflates which were used in situ to promote the asymmetric selenocyclization of γ-alkenyl oximes and δ-phenyl-γ-alkenyl oximes. The course of these reactions and hence the structures of the cyclization products were dictated by the (E)- or (Z)-geometry of the starting oximes. The two types of cyclization products were either the cyclic nitrones or the 1,2-oxazines; in both cases the reactions proceeded with excellent yields, complete regioselectivity and good diastereoselectivity.     

Natural Deep Eutectic Solvent (NADES) Extraction Improves Polyphenol Yield and Antioxidant Activity of Wild Thyme (Thymus serpyllum L.) Extracts

Wild thyme (Thymus serpyllum L.) herbal dust has been recognized as a potential underutilized resource for the recovery of antioxidants. The aim of this paper was to optimize natural deep eutectic solvent (NADES) extraction of polyphenols to obtain improved antioxidant activity of extracts determined by selected in vitro assays (DPPH, FRAP, and ABTS). Twenty different NADES systems were investigated in the first step of the screening of the extraction solvent and l-proline (Pro)–glycerine (Gly) based solvents provided the best results. Preliminary experiments organized by 2⁵⁻¹ fractional factorial design narrowed down the number of extraction factors from five (temperature, extraction time, NADES type, water content and L/S ratio) to three and determined their experimental domain for the final step. A face-centered central composite design with temperature (40–55–70 °C), extraction time (60–120–180 min) and L/S ratio (10–20–30 g NADES/g sample) was applied for influence analysis and process optimization. Multi-response optimization suggested a temperature of 65 °C, time of extraction of 180 min and L/S ratio of 28 g NADES/g DW as optimal extraction parameters. Experimental validation confirmed good agreement between experimental and predicted results in the extract obtained at optimal conditions and the interactions in the most suitable NADES (N16; Pro–Gly–H₂O; 1:2:1) were confirmed by the ¹H-NMR.     

Spectroscopic Studies of Quinobenzothiazine Derivative in Terms of the In Vitro Interaction with Selected Human Plasma Proteins. Part 1

Plasma proteins play a fundamental role in living organisms. They participate in the transport of endogenous and exogenous substances, especially drugs. 5-alkyl-12(H)-quino[3,4-b][1,4]benzothiazinium salts, have been synthesized as potential anticancer substances used for cancer treatment. Most anticancer substances generate a toxic effect on the human body. In order to check the toxicity and therapeutic dosage of these chemicals, the study of ligand binding to plasma proteins is very relevant. The present work presents the first comparative analysis of the binding of one of the 5-alkyl-12(H)-quino[3,4-b][1,4]benzothiazinium derivatives (Salt1) with human serum albumin (HSA), α-1-acid glycoprotein (AGP) and human gamma globulin (HGG), assessed using fluorescence, UV-Vis and CD spectroscopy. In order to mimic in vivo ligand–protein binding, control normal serum (CNS) was used. Based on the obtained data, the Salt1 binding sites in the tertiary structure of all plasma proteins and control normal serum were identified. Both the association constants (K_a) and the number of binding site classes (n) were calculated using the Klotz method. The strongest complex formed was Salt1–AGP_complex (K_a = 7.35·10⁴ and 7.86·10⁴ mol·L⁻¹ at excitation wavelengths λ_ex of 275 and 295 nm, respectively). Lower values were obtained for Salt1–HSA_complex (K_a = 2.45·10⁴ and 2.71·10⁴ mol·L⁻¹) and Salt1–HGG_complex (K_a = 1.41·10⁴ and 1.33·10⁴ mol·L⁻¹) at excitation wavelengths λ_ex of 275 and 295 nm, respectively, which is a positive phenomenon and contributes to the prolonged action of the drug. Salt1 probably binds to the HSA molecule in Sudlow sites I and II; for the remaining plasma proteins studied, only one binding site was observed. Moreover, using circular dichroism (CD), fluorescence and UV-Vis spectroscopy, no effect on the secondary and tertiary structures of proteins in the absence or presence of Salt1 has been demonstrated. Despite the fact that the conducted studies are basic, from the scientific point of view they are novel and encourage further in vitro and in vivo investigations. As a next part of the study (Part 2), the second new synthetized quinobenzothiazine derivative (Salt2) will be analyzed and published.     

pH-Responsive N^C-Cyclometalated Iridium(III) Complexes: Synthesis,Photophysical Properties,Computational Results,and Bioimaging Application

Herein we report four [Ir(N^C)₂(L^L)]ⁿ⁺, n = 0,1 complexes (1–4) containing cyclometallated N^C ligand (N^CH = 1-phenyl-2-(4-(pyridin-2-yl)phenyl)-1H-phenanthro[9,10-d]imidazole) and various bidentate L^L ligands (picolinic acid (1), 2,2′-bipyridine (2), [2,2′-bipyridine]-4,4′-dicarboxylic acid (3), and sodium 4,4′,4″,4‴-(1,2-phenylenebis(phosphanetriyl))tetrabenzenesulfonate (4). The N^CH ligand precursor and iridium complexes 1–4 were synthesized in good yield and characterized using chemical analysis, ESI mass spectrometry, and NMR spectroscopy. The solid-state structure of 2 was also determined by XRD analysis. The complexes display moderate to strong phosphorescence in the 550–670 nm range with the quantum yields up to 30% and lifetimes of the excited state up to 60 µs in deoxygenated solution. Emission properties of 1–4 and N^CH are strongly pH-dependent to give considerable variations in excitation and emission profiles accompanied by changes in emission efficiency and dynamics of the excited state. Density functional theory (DFT) and time-dependent density functional theory (TD DFT) calculations made it possible to assign the nature of emissive excited states in both deprotonated and protonated forms of these molecules. The complexes 3 and 4 internalize into living CHO-K1 cells, localize in cytoplasmic vesicles, primarily in lysosomes and acidified endosomes, and demonstrate relatively low toxicity, showing more than 80% cells viability up to the concentration of 10 µM after 24 h incubation. Phosphorescence lifetime imaging microscopy (PLIM) experiments in these cells display lifetime distribution, the conversion of which into pH values using calibration curves gives the magnitudes of this parameter compatible with the physiologically relevant interval of the cell compartments pH.     

Copper(II)-Mediated Iodination of 1-Nitroso-2-naphthol

The 3-Iodo-1-nitrosonaphthalene-2-ol (I-NON) was obtained by the copper(II)-mediated iodination of 1-nitroso-2-naphthol (NON). The suitable reactants and optimized reaction conditions, providing 94% NMR yield of I-NON, included the usage of Cu(OAc)₂·H₂O and 1:2:8 Cu^II/NON/I₂ molar ratio between the reactants. The obtained I-NON was characterized by elemental analyses (C, H, N), high-resolution ESI⁺-MS, ¹H and ¹³C{¹H} NMR, FTIR, UV-vis spectroscopy, TGA, and X-ray crystallography (XRD). The copper(II) complexes bearing deprotonated I-NON were prepared as follows: cis-[Cu(I-NON–H)(I-NON)](I₃) (1) was obtained by the reaction between Cu(NON-H)₂ and I₂ in CHCl₃/MeOH, while trans-[Cu(I-NON–H)₂] (2) was synthesized from I-NON and Cu(OAc)₂ in MeOH. Crystals of trans-[Cu(I-NON–H)₂(THF)₂] (3) and trans-[Cu(I-NON–H)₂(Py)₂] (4) were precipitated from solutions of 2 in CHCl₃/THF and Py/CHCl₃/MeOH mixtures, respectively. The structures of 1 and 3–4 were additionally verified by X-ray crystallography. The characteristic feature of the structures of 1 and 3 is the presence of intermolecular halogen bonds with the involvement of the iodine center of the metal-bound deprotonated I-NON. The nature of the I···I and I···O contacts in the structures of 1 and 3, correspondingly, were studied theoretically at the DFT (PBE0-D3BJ) level using the QTAIM, ESP, ELF, NBO, and IGM methods.     

Oxidation of disulfides with electrophilic halogenating reagents: concise methods for preparation of thiosulfonates and sulfonyl halides

The reaction of aromatic or benzylic disulfides with 2.5 equiv of Selectfluor™ in acetonitrile/water (10:1) at room temperature efficiently produced the corresponding thiosulfonates. Conversely, the reaction of disulfides with 6.5 equiv of Selectfluor™ or thiosulfonates with 4.5 equiv of Selectfluor™ in refluxing acetonitrile/water (10:1) provided sulfonyl fluorides in high yields. Accufluor™ and FP-T300™ are also effective in preparing sulfonyl fluorides from disulfides under the similar reaction conditions. Sulfonyl chlorides or sulfonyl bromides were effectively obtained from the reaction of disulfides with 6 equiv of either N-chlorosuccinimide or N-bromosuccinimide in acetonitrile/water (10:1) at room temperature. Some other electrophilic chlorinating or brominating reagents are also able to be used instead of N-chlorosuccinimide or N-bromosuccinimide for the syntheses of sulfonyl halides from disulfides. These reactions of disulfides with electrophilic halogenating reagents are convenient methods to prepare thiosulfonates and sulfonyl halides.     

Optimizing Procedures of Ultrasound-Assisted Extraction of Waste Orange Peels by Response Surface Methodology

The simultaneous effects of three continuous factors: solvent concentration (50–100%), treated times (25–85 min), treated temperatures (25–55 °C), and two categorical factors: type of solvents (methanol or ethanol) and ultrasonic frequency (28 kHz or 40 kHz) on ultrasonic-assisted extraction yield from waste orange peels were evaluated and optimized by response surface methodology. Fourier Transform Infrared (FTIR) spectroscopy with a wavelength of 500 cm⁻¹ to 4000 cm⁻¹ was employed to rapidly identify the orange extracts. The significant polynomial regression models on crude extraction, sediments after evaporation, and precipitation yield were established (p < 0.05). Results revealed that solvent concentration affected crude extraction and precipitation yield linearly (p < 0.01). The optimal and practical ultrasound-assisted extraction conditions for increasing the precipitation yield were using 61.42% methanol with 85 min at 55 °C under 40 kHz ultrasonic frequency. The spectra of extracts showed a similar fingerprint of hesperidin.     

Selenium-catalyzed iodohydrin formation from alkenes

A new simple method for catalyzed iodohydroxylation of alkenes using stoichiometric amounts of water is described. The iodohydrins were prepared in good yields from the corresponding alkenes using N-iodosuccinimide, 2 equiv of H₂O, and catalytic amounts of diphenyl diselenide in MeCN.     

Replacing the Z-phenyl Ring in Tamoxifen® with a para-Connected NCN Pincer-Pt-Cl Grouping by Post-Modification

Post-modification of a series of NCN-pincer platinum(II) complexes [PtX(NCN-R-4)] (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]^–, R = C(O)H, C(O)Me and C(O)Et), X = Cl^– or Br^–) at the para-position using the McMurry reaction was studied. The synthetic route towards two new [PtCl(NCN-R-4)] (R = C(O)Me and C(O)Et) complexes used above is likewise described. The utility and limitations of the McMurry reaction involving these pincer complexes was systematically evaluated. The predicted “homo-coupling” reaction of [PtBr(NCN-C(O)H-4)] led to the unexpected formation of 3,3′,5,5′-tetra[(dimethylamino)methyl]-4,4′-bis(platinum halide)-benzophenone (halide = Br or Cl), referred to hereafter as the bispincer-benzophenone complex 13. This material was further characterized using X-ray crystal structure determination. The applicability of the pincer complexes in the McMurry reaction is shown to open a route towards the synthesis of tamoxifen-type derivatives of which one phenyl ring of Tamoxifen^® itself is replaced by an NCN arylplatinum pincer fragment. The newly synthesized derivatives can be used as potential candidates in anti-cancer drug screening protocols. Two NCN-arylpincer platinum tamoxifen type derivatives, 5 and 6, were successfully synthesized and of 5 the separation of the diastereomeric E-/Z-forms was achieved. Compound 6, which is the pivaloyl protected NCN pincer platinum hydroxy-Tamoxifen^® derivative, was obtained as a mixture of E-/Z-isomers. The new derivatives were further analyzed and characterized with ¹H-, ¹³C{¹H}- and ¹⁹⁵Pt{¹H}-NMR, IR, exact mass MS and elemental analysis.