Simultaneous Removal of Heavy Metals (Cu,Cd, Cr,Ni, Zn and Pb) from Aqueous Solutions Using Thermally Treated Romanian Zeolitic Volcanic Tuff

Increased concentrations of heavy metals in the environment are of public health concern, their removal from waters receiving considerable interest. The aim of this paper was to study the simultaneous adsorption of heavy metals (Cu, Cd, Cr, Ni, Zn and Pb) from aqueous solutions using the zeolitic volcanic tuffs as adsorbents. The effect of thermal treatment temperature, particle size and initial metal concentrations on the metal ions sorption was investigated. The selectivity of used zeolite for the adsorption of studied heavy metals followed the order: Pb > Cr > Cu > Zn > Cd > Ni. The removal efficiency of the heavy metals was strongly influenced by the particle sizes, the samples with smaller particle size (0–0.05 mm) being more efficient in heavy metals removal than those with larger particle size (1–3 mm). Generally, no relevant changes were observed in heavy metals removal efficiency for the treatment temperatures of 200 °C and 350 °C. Moreover, at a higher temperature (550 °C), a decrease in the removal efficiencies was observed. The Cd, Zn, Cu, Cr, Zn and Ni sorption was best described by Langmuir model according to the high values of correlation coefficient. The pseudo-first-order kinetic model presented the best correlation of the experimental data.     

Geochemical and Spatial Distribution of Topsoil HMs Coupled with Modeling of Cr Using Chemometrics Intelligent Techniques: Case Study from Dammam Area,Saudi Arabia

Unconsolidated earthen surface materials can retain heavy metals originating from different sources. These metals are dangerous to humans as well as the immediate environment. This danger leads to the need to assess various geochemical conditions of the materials. In this study, the assessment of topsoil materials’ contamination with heavy metals (HMs) was conducted. The material’s representative spatial samples were taken from various sources: agricultural, industrial, and residential areas. The materials include topsoil, eolian deposits, and other unconsolidated earthen materials. The samples were analyzed using the ICP-OES. The obtained results based on the experimental procedure indicated that the average levels of the heavy metals were: As (1.21 ± 0.69 mg/kg), Ba (110.62 ± 262 mg/kg), Hg (0.08 ± 0.18 mg/kg), Pb (6.34 ± 14.55 mg/kg), Ni (8.95 ± 5.66 mg/kg), V (9.98 ± 6.08 mg/kg), Cd (1.18 ± 4.33 mg/kg), Cr (31.79 ± 37.9 mg/kg), Cu (6.76 ± 12.54 mg/kg), and Zn (23.44 ± 84.43 mg/kg). Subsequently, chemometrics modeling and a prediction of Cr concentration (mg/kg) were performed using three different modeling techniques, including two artificial intelligence (AI) techniques, namely, generalized neural network (GRNN) and Elman neural network (Elm NN) models, as well as a classical multivariate statistical technique (MST). The results indicated that the AI-based models have a superior ability in estimating the Cr concentration (mg/kg) than MST, whereby GRNN can enhance the performance of MST up to 94.6% in the validation step. The concentration levels of most metals were found to be within the acceptable range. The findings indicate that AI-based models are cost-effective and efficient tools for trace metal estimations from soil.     

Determination of Pharmaceuticals,Heavy Metals,and Oxysterols in Fish Muscle

The present study aimed to assess the levels of 98 multi-class pharmaceuticals including cardiovascular drugs, antidepressants, hypnotics, antibiotics, and sulfonamides occurring in the muscle tissue of fish caught in the Baltic Sea. The following fish species were collected: perch (Perca fluviatilis); flounder (Platichthys flesus); turbot (Scophthalmus maximus); plaice (Pleuronectes platessa); cod (Gadus morhua callarias); bream (Abramis brama); crucian (Carassius carassius). Additionally, in the examined fish muscle the levels of heavy metals and trace elements were determined (As; Ag; Au; Ba; Cd; Co; Cr; Cu; Hg; Li; Mo; Ni; Pb; Sb; Se; Sn; Tl; V) as well as the levels of cholesterol and its 5 derivatives (7-ketocholesterol; 7α-hydroxycholesterol; 7β-hydroxycholesterol; 5β,6β-epoxy-cholesterol; 5α,6α-epoxycholesterol). In the performed studies 11 out of 98 examined pharmaceuticals were detected in fish muscle. The levels of pharmaceuticals in fish muscle varied depending on the species. In the tissues of bream and crucian, no pharmaceuticals were found. Mercury, lead and arsenic were detected in the muscles of all examined fish. Based on the hazard factor for Hg, Pb, Cd, Ni (target hazard quotient, THQ < 1), it was found that the consumption of the studied fish does not constitute a health risk. However, the THQ for As remained >1 indicated possible risk from those metals. In the examined fish muscle the total cholesterol oxidation products (COPs) level of oxysterols were, respectively: 6.90 (cod) μg/g–4.18 μg/g (perch), which corresponded to 0.7–1.5% of cholesterol. The main COPs evaluated were 7-ketocholesterol (0.78 ± 0.14–1.79 ± 0.06 μg/g), 7β-hydroxycholesterol (0.50 ± 0.04–3.20 ± 2.95 μg/g) and 5β,6β-epoxycholesterol (0.66 ± 0.03–1.53 ± 0.66 μg/g). The assessment of health hazards due to contaminations is necessary, which may help to introduce national legislation and global standards aimed at reducing or even eliminating the exposure to contaminants.     

Determination of Cd,Pb, and Cu in the Atmospheric Aerosol of Central East Antarctica at Dome C (Concordia Station)

Trace heavy metals Cd, Pb, and Cu were determined (by square wave anodic stripping voltammetry) in aerosol samples collected at Dome C (the Italo-French Station Concordia), a remote site of the Central East Antarctic plateau, for which no data are available until now. During the Austral Summer 2005–2006, three PM10 high-volume impactors were installed in two locations nearby of Concordia station: the first one very close and downwind of the station (about 50 m north), the other two (very close to each other) in a ‘distant’ site, upwind of the station and close to the astrophysics tent (not used in that expedition) at ~800 m south of Station Concordia. For each sample, the availability of the mass of the aerosol collected (obtained by differential weighing carried out on site), in addition to the volume of the filtered air, allowed us to express results both in terms of metal mass fractions in the aerosol and in the usual way of metal atmospheric concentrations. Metal contents increased in the order Cd < Pb < Cu with the following ranges of values: Cd 1.0–8.4 µg g⁻¹ (0.09–3.1 pg m⁻³), Pb 96–470 µg g⁻¹ (12–62 pg m⁻³), and Cu 0.17–20 mg g⁻¹ (0.027–2.4 ng m⁻³). From the metal temporal profiles obtained we estimated the following background values for the area of Dome C, expressed both in mass fractions and in atmospheric concentrations: Cd 1.2 ± 0.2 µg g⁻¹ (0.24 ± 0.13 pg m⁻³), Pb (here fixed as upper limit) 113 ± 13 µg g⁻¹ (21 ± 8 pg m⁻³), and Cu 0.91 ± 0.48 mg g⁻¹ (0.12 ± 0.07 ng m⁻³). The highest values were observed in the first part of the season, and particularly for the site close to the station, possibly related to sample contamination linked to intense activity at the Concordia station connected with the beginning of the expedition, including aircraft arrivals/departures. Increments of up to 10 times (and even 20 times for Cu) were recorded with respect to the background values. The metal excesses of the contaminated over background samples were found approximately, except for Cu, in the same proportion of the metal contents of the special Antarctic blend (SAB) diesel fuel, which is used almost exclusively at Concordia Station. The effect of the wind direction was also observed. Thus in the intermediate period of the campaign, when the wind direction reversed for several days with respect to the prevailing one, Cd and Pb metal contents decreased at the sampling point installed close to the station, now upwind of Concordia station, and increased at the ‘clean’ site astrophysics tent, turned downwind at the main station. No simple and easily interpretable effect of the wind direction was observed for Cu, which suggests that some other extemporaneous and not clearly identified factor may have intervened in this case. These results suggest that the human impact at Dome C influences mainly the zone very close to the station, but also the area in the neighborhood, including the supposed clean site of the astrophysics tent (about 800 m far from the station), when the wind direction reverses with respect to the prevailing one, leaving the site downwind of the station Concordia. Since no other data are reported for the Dome C area, our results are compared with literature data referred to the South Pole Station (the only other plateau site for which data are available) and several other coastal Antarctic sites, observing that our results (excluding Cu) are the lowest ever observed for Antarctic aerosol.     

Quantification of heavy metals for the recycling of waste plastics from electrotechnical applications

Analytical data on element concentrations in plastics is an important prerequisite for the recycling of technical waste plastics. The chemical resistance and high additive contents of such materials place a high demand on analytical methods for quantifying elements in thermoplastics from electrotechnical applications. The applicability of three common independent analytical methods (EDXRF, AAS, ICP-AES) for the quantification of heavy metals in such technical waste plastics of varying composition was studied. Following specific sample pre-treatments, such as closed vessel microwave assisted digestion and wet ashing with H(2)SO(4), three hazardous metals (Pb, Cd, Sb) were determined. Conditions were investigated to minimize matrix effects for all analytical techniques employed. The trueness for the quantification of Cd was checked by using the certified reference material VDA 001-004 (40-400 mug g(-1) Cd in polyethylene), and no significant differences to certified values were found. The best detection limits were found to be 2, 1.3 and 7.9 mug g(-1) for Cd, Pb and Sb, respectively. In technical waste polymers, Sb was detected to be in the range 1-7%, Cd in the range 80-12 000 mug g(-1) and Pb in the range 90-700 mug g(-1). The precision reached for the analysis of this complex material, is comparable for all methods, and can be expressed by a relative standard deviation smaller than 8%. Application of multivariate analysis of variances (MANOVA) showed no differences between the mean results, except for the ICP-AES analysis following wet ashing with H(2)SO(4).     

Synthesis and Characterization of Chelating Hyperbranched Polyester Nanoparticles for Cd(II) Ion Removal from Water

Chelating hyperbranched polyester (CHPE) nanoparticles have become an attractive new material family for developing high-capacity nanoscale chelating agents with highly branched structures and many functional groups in the main chains and end groups that can be used to remove heavy metals from water. In this study, a hyperbranched polyester with a particle size of 180–643 nm was synthesized with A₂+B₃ interfacial polymerization, using dimethylmalonyl chloride as the difunctional monomer (A₂) and 1,1,1-tris(4-hydroxyphenyl)ethane (THPE) as the trifunctional monomer (B₃). FTIR and NMR were used to characterize the CHPE and confirm the structure. The CHPE nanoparticles were generally considered hydrophilic, with an observed swelling capacity of 160.70%. The thermal properties of the CHPE nanoparticles were studied by thermal gravimetric analysis (TGA) with 1% mass loss at temperatures above 185 °C. The XRD of the CHPE nanoparticles showed a semi-crystalline pattern, as evident from the presence of peaks at positions ~18° and 20°. The nature of the surface of the CHPE was examined using SEM. Batch equilibrium was used to investigate the removal properties of the CHPE nanoparticles towards Cd(II) ions as a function of temperature, contact time, and Cd(II) concentration. The Cd(II) ion thermodynamics, kinetics, and desorption data on the CHPE nanoparticles were also studied.     

Chemical Profiling and Antimicrobial Properties of Honey Bee (Apis mellifera L.) Venom

The incidence of antibiotic resistance in pathogenic bacteria has become an alarming clinical and social problem. Therefore, the demand for alternative antimicrobial compounds has increased. In this study, a chemical profile of honey bee (Apis mellifera L.) venom (HBV) has been determined by HPLC and FTIR-ATR spectroscopy, and tested for antibacterial activity, as well as efficiency with regard to conventional antibiotics. The investigated HBV was of high quality with melittin and total protein contents of 70.10 ± 7.01%, and 84.44 ± 3.12 g/100 g, respectively. The purity of HBV was confirmed by FTIR-ATR spectral profiling, which revealed a unique pattern of absorption bands that are characteristic of its major fractions. In addition, HBV showed a broad spectrum of activity against all three tested biomasses of potentially pathogenic Gram-positive and Gram-negative bacteria with MIC values ranging between 12.5 and 200 µg/mL, and MBC between 12.5 and 400 µg/mL. When compared to conventional antibiotics, HBV (400 µg) showed up to 27.8% efficiency of tetracycline (30 µg), 52.2% erythromycin (15 µg), 21.2% ciprofloxacin (5 µg), and 34.6% of ampicillin-sulbactam (20 µg). The overall results demonstrate the therapeutic potential of the analyzed HBV.     

Folate Content and Yolk Color of Hen Eggs from Different Farming Systems

This study aimed to compare folate contents in hen eggs from four different farming systems, namely organic, free range, barn, and cage one. Folate retention during egg boiling was studied as well. The contents of individual folate vitamers were determined using the high-performance liquid chromatography method (HPLC), following trienzyme treatment. Folate content in eggs differed significantly (p < 0.05) due to the rearing system, with the highest mean content determined in the eggs from organic farming (113.8 µg/100 g). According to this study, one egg (60 g) may provide 40–86 µg of folates, which corresponds to 10–22% of the recommended daily intake for adults, 400 µg according to the Nutrition Standards for the Polish Population. The predominant folate form found in egg was 5-methyltetrahydrofolate, which showed considerably greater stability under boiling compared to 10-formylfolic acid present in a lower amount. In most eggs tested, the losses in total folate content did not exceed 15%. The color of yolk of the most folate-abundant organic eggs, had the highest value of lightness (L*) and the lowest value of redness (a*). This, however, does not correspond to consumer preferences of intense golden yolk color.     

In Vitro Alpha-Glucosidase Inhibitory Activity and the Isolation of Luteolin from the Flower of Gymnanthemum amygdalinum (Delile) Sch. Bip ex Walp.

Diabetes mellitus is a major health issue that has posed a significant challenge over the years. Gymnanthemum amygdalinum is a well-known plant that can be potentially used to treat this disease. Therefore, this study aimed to evaluate the inhibitory effect of its root, stem bark, leaves, and flower extracts on alpha-glucosidase using an in vitro inhibition assay to isolate the bioactive compounds and determine their levels in the samples. The air-dried plant parts were extracted by maceration using methanol. The results showed that the flower extract had the greatest inhibitory effect (IC50 47.29 ± 1.12 µg/mL), followed by the leaves, roots, and stem bark. The methanolic flower extract was further fractionated with different solvents, and the ethyl acetate fraction showed the strongest activity (IC50 19.24 ± 0.12 µg/mL). Meanwhile, acarbose was used as a positive control (IC50 73.36 ± 3.05 µg/mL). Characterization based on UV, 1H-, and 13C-NMR established that the ethyl acetate fraction yielded two flavonoid compounds, namely, luteolin and 2-(3,4-dihydroxyphenyl)-5,7-dihydroxy-3-methoxy-4H-chromen-4-on, which had IC50 values of 6.53 ± 0.16 µg/mL and 39.95 ± 1.59 µg/mL, respectively. The luteolin levels in the crude drug, methanolic extract, and ethyl acetate fraction were 3.4 ± 0.2 mg (0.3%), 32.4 ± 0.8 mg (3.2%), and 68.9 ± 3.4 mg (6.9%) per 1 g samples, respectively. These results indicated that the G. amygdalinum flower extract exerted potent inhibitory alpha-glucosidase activity.     

Anticancer,Anticoagulant, Antioxidant and Antimicrobial Activities of Thevetia peruviana Latex with Molecular Docking of Antimicrobial and Anticancer Activities

Natural origin molecules represent reliable and excellent sources to overcome some medicinal problems. The study of anticancer, anticoagulant, and antimicrobial activities of Thevetia peruviana latex were the aim of the current research. An investigation using high-performance liquid chromatography (HPLC) revealed that the major content of the flavonoids are rutin (11.45 µg/mL), quersestin (7.15 µg/mL), naringin (5.25 µg/mL), and hisperdin (6.07 µg/mL), while phenolic had chlorogenic (12.39 µg/mL), syringenic (7.45 µg/mL), and ferulic (5.07 µg/mL) acids in latex of T. peruviana. Via 1,1-diphenyl-2- picrylhydrazyl (DPPH) radical scavenging, the experiment demonstrated that latex had a potent antioxidant activity with the IC₅₀ 43.9 µg/mL for scavenging DPPH. Hemolysis inhibition was 58.5% at 1000 µg/mL of latex compared with 91.0% at 200 µg/mL of indomethacin as positive control. Negligible anticoagulant properties of latex were reported where the recorded time was 11.9 s of prothrombin time (PT) and 29.2 s of the activated partial thromboplastin time (APTT) at 25 µg/mL, compared with the same concentration of heparin (PT 94.6 s and APPT 117.7 s). The anticancer potential of latex was recorded against PC-3 (97.11% toxicity) and MCF-7 (96.23% toxicity) at 1000 μg/mL with IC₅₀ 48.26 μg/mL and 40.31 µg/mL, respectively. Disc diffusion assessment for antimicrobial activity recorded that the most sensitive tested microorganisms to latex were Bacillus subtilis followed by Escherichia coli, with an inhibition zone (IZ) of 31 mm with minimum inhibitory concentration (MIC) (10.2 μg/mL) and 30 mm (MIC, 12.51 μg/mL), respectively. Moreover, Candida albicans was sensitive (IZ, 28 mm) to latex, unlike black fungus (Mucor circinelloides). TEM examination exhibited ultrastructure changes in cell walls and cell membranes of Staphylococcus aureus and Pseudomonas aeruginosa treated with latex. Energy scores of the molecular docking of chlorogenic acid with E. coli DNA (7C7N), and Rutin with human prostate-specific antigen (3QUM) and breast cancer-associated protein (1JNX), result in excellent harmony with the experimental results. The outcome of research recommended that the latex is rich in constituents and considered a promising source that contributes to fighting cancer and pathogenic microorganisms.     

Biochemical and Functional Characterization of Kidney Bean Protein Alcalase-Hydrolysates and Their Preservative Action on Stored Chicken Meat

A new preservation approach is presented in this article to prolong the lifetime of raw chicken meat and enhance its quality at 4 °C via coating with highly soluble kidney bean protein hydrolysate. The hydrolysates of the black, red, and white kidney protein (BKH, RKH, and WKH) were obtained after 30 min enzymatic hydrolysis with Alcalase (E/S ratio of 1:100, hydrolysis degree 25–29%). The different phaseolin subunits (8S) appeared in SDS-PAGE in 35–45 kD molecular weight range while vicilin appeared in the molecular weight range of 55–75 kD. The kidney bean protein hydrolysates have considerable antioxidant activity as evidenced by the DPPH-scavenging activity and β-carotine-linolenic assay, as well as antimicrobial activity evaluated by disc diffusion assay. BKH followed by RKH (800 µg/mL) significantly (p ≤ 0.05) scavenged 95, 91% of DPPH and inhibited 82–88% of linoleic oxidation. The three studied hydrolysates significantly inhibited the growth of bacteria, yeast, and fungi, where BKH was the most performing. Kidney bean protein hydrolysates could shield the chicken meat because of their amphoteric nature and many functional properties (water and oil-absorbing capacity and foaming stability). The quality of chicken meat was assessed by tracing the fluctuations in the chemical parameters (pH, met-myoglobin, lipid oxidation, and TVBN), bacterial load (total bacterial count, and psychrophilic count), color parameters and sensorial traits during cold preservation (4 °C). The hydrolysates (800 µg/g) significantly p ≤ 0.05 reduced the increment in meat pH and TVBN values, inhibited 59–70% of lipid oxidation as compared to control during 30 days of cold storage via eliminating 50% of bacterial load and maintained secured storage for 30 days. RKH and WKH significantly (p ≤ 0.05) enhanced L*, a* values, thus augmented the meat whiteness and redness, while, BKH increased b* values, declining all color parameters during meat storage. RKH and WKH (800 µg/g) (p ≤ 0.05) maintained 50–71% and 69–75% of meat color and odor, respectively, increased the meat juiciness after 30 days of cold storage. BKH, RKH and WKH can be safely incorporated into novel foods.     

Fungal Proteins from Sargassum spp. Using Solid-State Fermentation as a Green Bioprocess Strategy

The development of green technologies and bioprocesses such as solid-state fermentation (SSF) is important for the processing of macroalgae biomass and to reduce the negative effect of Sargassum spp. on marine ecosystems, as well as the production of compounds with high added value such as fungal proteins. In the present study, Sargassum spp. biomass was subjected to hydrothermal pretreatments at different operating temperatures (150, 170, and 190 °C) and pressures (3.75, 6.91, and 11.54 bar) for 50 min, obtaining a glucan-rich substrate (17.99, 23.86, and 25.38 g/100 g d.w., respectively). The results indicate that Sargassum pretreated at a pretreatment temperature of 170 °C was suitable for fungal growth. SSF was performed in packed-bed bioreactors, obtaining the highest protein content at 96 h (6.6%) and the lowest content at 72 h (4.6%). In contrast, it was observed that the production of fungal proteins is related to the concentration of sugars. Furthermore, fermentation results in a reduction in antinutritional elements, such as heavy metals (As, Cd, Pb, Hg, and Sn), and there is a decrease in ash content during fermentation kinetics. Finally, this work shows that Aspergillus oryzae can assimilate nutrients found in the pretreated Sargassum spp. to produce fungal proteins as a strategy for the food industry.     

Monitoring of Pollutants Content in Bottled and Tap Drinking Water in Italy

The concentration levels of thirteen organic pollutants and selected heavy metals were investigated in 40 plastics bottled and tap water samples. Some of the selected contaminants have an ascertained or suspected endocrine disrupting activity, such as Bisphenol A (BPA) and its analogs, and Bis 2-ethylhexyl phthalate (DEHP), which are used by industries as plasticizers. The most frequently detected pollutants were Bisphenol AF (BPAF) (detection frequency (DF) = 67.5%, mean 387.21 ng L⁻¹), DEHP (DF = 62.5%, mean 46.19 µg L⁻¹) and BPA (DF = 60.0%, mean 458.57 ng L⁻¹), with higher concentration levels found in tap waters. Furthermore, a possible level of exposure to thirteen pollutants via drinking water intake was calculated. Our findings show that, even though the occurrence of contaminants and heavy metals in drinking waters does not pose an immediate, acute health risk for the population, their levels should be constantly monitored and “hard-wired” into everyday practice. Indeed, the health impact to the continuous and simultaneous intake of a huge variety of xenobiotics from various sources by humans is complex and still not fully understood.     

Trace determination of Cd, Cu, Pb and Zn in annual growth rings by differential pulse anodic stripping voltammetry

Summary A new voltammetric procedure has been developed for the determination of toxic heavy metals in annual growth rings. The method is based on a wet digestion of minute quantities of wood material of 10–25 mg with an acid mixture of HNO₃ and HClO₄ in a quartz cup and the subsequent simultaneous determination of Cd, Pb, Cu and Zn by differential pulse anodic stripping voltammetry (DPASV) at the hanging mercury drop electrode (HMDE). The accuracy of the method has been proved by using electrothermal atomic absorption spectrometry as an independent procedure. The problems of the contamination by ubiquitous heavy metals during the wet digestion were investigated and their influence on the results was effectively diminished. Losses of the studied metals have not been observed. The high sensitivity of the method enables the determination of the toxic metals Pb and Cd in the analyte of the wet digestion with a relative standard deviation of less than 20% in the low level range 0.1–4 g/l.The potentialities of the method have been shown in the determination of Cd, Pb, Cu and Zn in cores of oak (Quercus petraea) from Königstein (Taunus, FRG). The high sensitivity made it possible to analyze individual growth rings and thus to avoid damages on trees using an excessive quantity of material. In two samples taken as example a distinct increase of the concentration of Cd and Pb during the last decade indicates metal pollution of the region by atmospheric precipitates.

---

Spurenbestimmung von Cd, Cu, Pb und Zn in Jahresringen mit Hilfe der Differentialpuls-ASV

---

Attached from the Institute of Chemistry, Universidad del Norte, Antofagasta, Chile. Taken in part from the Ph.D. Thesis, University in Bonn     

仿生提取-电感耦合等离子体-质谱法测定柏子养心片中可溶性重金属

国家食品药品监督管理总局的2014年国家药品抽验计划将柏子养心片定为抽验品种,本实验利用人工胃液仿生提取样品可溶性重金属,通过微波消解技术对提取液进行消解处理,建立了仿生提取-ICP-MS法测定18批柏子养心片中 Co, Cr, Cu, Ba, Cd, Mn, Ni, Pb, Hg, Sr, Zn 11种可溶性重金属的含量的分析方法。本方法各元素标准系列线性回归方程的相关系数为0.9989~1.0000,检出限为0.19~5.6μg/ L,方法的重复性 RSD 值均小于6.2%,精密度的 RSD 值均小于5.6%,加标回收率在87.7%~101.9%之间,满足检测要求。参照《药用植物及制剂进出口绿色行业标准》规定的重金属限量标准,18批样品中 Pb, Cd, Cu 均未超过标准,Hg 含量平均值为7.68 mg/ kg,超过标准值。仿生提取-ICP-MS 法的建立为柏子养心片的安全性研究提供参考依据。     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

The homogeneity of heavy metal deposition on glass fibre filters collected using a high-volume sampler in the vicinity of an opencast chrome mine complex at Kemi,Northern Finland

The homogeneity of heavy metal (Cr, Ni, Cu, Fe and Cd) distribution on glass fibre filters (Munktell MG 160, 203 x 254 mm, 75 g m(-2)) collected using a high-volume sampler (Wedding & Associates) at an opencast chrome mine complex at Kemi, Northern Finland was studied. The heavy metals in the total suspended particulate (TSP) material were analysed by inductively coupled plasma atomic emission spectrometry (ICP-AES) or graphite furnace atomic absorption spectrometry (GFAAS). The glass fibre filters were digested in a microwave oven using a mixture of aqua regia+HF acids. There was significant non-uniform distribution of heavy metals on glass fibre filters. The TSP material containing chromite was very difficult to dissolve by acid digestion. The results from X-ray fluorescence spectrometry (XRF), and from energy filtering transmission electron microscope (EFTEM) equipped with energy dispersive X-ray spectrometer (EDS), showed that insoluble residue left after microwave oven digestion with aqua regia+HF acids was probably partly due to chemical reactions occurring during microwave heating.     

Cytotoxic and apoptotic effects of Hypericum androsaemum on prostate adenocarcinoma (PC-3) and hepatocellular carcinoma (Hep G2) cell lines with identification of secondary metabolites by LC-HRMS

The study aims to determine the secondary metabolites of Hypericum androsaemum L. extracts by liquid chromatography-high resolution mass spectrometry (LC-HRMS), and investigate the antioxidant and cytotoxic activities of the plant. Cytotoxic activity was evaluated by MTT assay, and apoptosis induction abilities on human prostate adenocarcinoma (PC-3), and hepatocellular carcinoma (Hep G2) cell lines. Accordingly, major secondary metabolites were found as hederagenin (762 ± 70.10 μg/g) in the leaves dichloromethane (LD), herniarin (167 ± 1.50 μg/g) in fruit dichloromethane (FD), (-)-epicatechin (6538 ± 235.36 μg/g) in the leaves methanol (LM), (-)-epigallocatechin gallate (758 ± 20.46 μg/g) in the fruit methanol (FM), and caffeic acid (370 ± 8.88 μg/g) in the fruit water (FW), and (3313 ± 79.51 μg/g) in the leaves water (LW) extracts. LM exerted strong antioxidant activity in DPPH free (IC₅₀ 10.94 ± 0.08 μg/mL), and ABTS cation radicals scavenging (IC₅₀ 9.09 ± 0.05 μg/mL) activities. FM exhibited cytotoxic activity with IC₅₀ values of 73.23 ± 3.06 µg/mL and 31.64 ± 2.75 µg/mL on PC-3 and Hep G2 cell lines, respectively. Being the richest extract in terms of quillaic acid (630 ± 18.9 μg/g), which is a well-known cytotoxic triterpenoid with proven apoptosis induction ability on different cells, FM extract showed apoptosis induction activity with 64.75% on PC-3 cells at 50 μg/mL concentration. The study provides promising results about the potential of Hypericum androsaemum on cancer prevention.     

Development,Validation, and Application of the UPLC-DAD Methodology for the Evaluation of the Qualitative and Quantitative Composition of Phenolic Compounds in the Fruit of American Cranberry (Vaccinium macrocarpon Aiton)

Phenolic compounds in the fruit of American cranberry (Vaccinium macrocarpon Aiton) determine the antioxidant, anti-inflammatory, anticancer, and other biological effects. The berries are used in the production of medicinal preparations and food supplements, which highlights the importance of qualitative and quantitative analysis of phenolic compounds in cranberry fruit raw material. The aim of our study was to develop and validate an efficient, cost-effective, reproducible, and fast UPLC-DAD methodology for the evaluation of the qualitative and quantitative composition of phenolic compounds in raw material and preparations of American cranberry fruit. During the development of the methodology, chlorogenic acid and the following flavonols were identified in cranberry fruit samples: myricetin-3-galactoside, quercetin-3-galactoside, quercetin-3-glucoside, quercetin-3-α-L-arabinopyranoside, quercetin-3-α-L-arabinofuranoside, quercetin-3-rhamnoside, myricetin, and quercetin. The developed and optimized UPLC-DAD methodology was validated according to the guidelines of the International Council for Harmonization (ICH), evaluating the following parameters: range, specificity, linearity (R² > 0.999), precision (%RSD < 2%), LOD (0.38–1.01 µg/mL), LOQ (0.54–3.06 µg/mL), and recovery (80–110%). The developed methodology was applied to evaluate the qualitative and quantitative composition of phenolic compounds in fruit samples of cranberry cultivars ‘Baifay’, ‘Bergman’, ‘Prolific’, and ‘Searles’, as well as ‘Bain-MC’ and ‘BL-12′ clones. In the tested samples, the majority (about 70%) of the identified flavonols were quercetin derivatives. The greatest amount of quercetin-3-galactoside (1035.35 ± 4.26 µg/g DW) was found in fruit samples of the ‘Searles’ cultivar, and the greatest amount of myricetin-3-galactoside (940.06 ± 24.91 µg/g DW) was detected in fruit samples of the ‘Woolman’ cultivar.