Synthesis of functionalized porphyrins as oxygen ligand receptors

Oxophilic synthetic receptors were designed and synthesized using a porphyrin scaffold, with the aim of constructing a preorganized complementary binding site for phenols and carbohydrates. We pursued three strategies for phenol recognition: (1) Lewis acid/Lewis base combinations serving as a hydrogen bond donor and acceptor for the OH group, (2) Lewis base/pi-pi stacking, targeting both the OH group and the aromatic moiety of phenols, and (3) exchange of the axial hydroxyl ligand on a trivalent and oxophilic metal center of aluminum porphyrin. For the recognition of acidic phenols, the most promising recognition motif was Lewis base/pi-pi stacking, which can bind to phenols with a hydrogen bond and pi-pi stacking interactions. [5-(8-Quinolyl)-10,15,20-triphenylporphyrinato]zinc binds to p-nitrophenol with a binding constant of 540 M(-)(1) in CHCl(3) at 25 degrees C. For carbohydrate recognition, we designed the metalloporphyrin receptor having 8-quinolyl groups and o-carbomethoxymethoxyphenyl groups, where these Lewis basic parts serve as the cooperative hydrogen bonding sites for the hydroxyl groups of glucoside. The receptor binds to beta-octyl glucoside with a binding constant of 7.35 x 10(4) M(-)(1) in CHCl(3) at 15 degrees C, demonstrating importance of formation of a highly ordered hydrogen bonding network between the receptor and the guest. These binding features have significant implications for the rational design of oxophilic artificial receptors.     

Abnormal solvent effects on hydrogen atom abstractions. 1. The reactions of phenols with 2,2-diphenyl-1-picrylhydrazyl (dpph*) in alcohols

Rate constants, k(ArOH/dpph*)(S), for hydrogen atom abstraction from 13 hindered and nonhindered phenols by the diphenylpicrylhydrazyl radical, dpph*, have been determined in n-heptane and a number of alcoholic and nonalcoholic, hydrogen-bond accepting solvents. Abnormally enhanced k(ArOH/dpph*)(S) values of have been observed in alcohols. It is proposed that this is due to partial ionization of the phenols and a very fast electron transfer from phenoxide anion to dpph*. The popular assessment of the antioxidant activities of phenols with dpph* in alcohol solvents will generally lead to an overestimation of their activities.     

Chlorination-methylation of the hydrogen-terminated silicon(111) surface can induce a stacking fault in the presence of etch pits

Recently, we reported STM images of the methylated Si(111) surface [prepared through chlorination-alkylation of the Si(111)-H surface] taken at 4.7 K, indicating that the torsion angle of the methyl group with respect to the subsurface silicon layer is phi = 23 +/- 3 degrees . Repulsions between H atoms in adjacent methyl groups are minimized at 30 degrees , while repulsions between H atoms and second layer Si atoms are minimized at 60 degrees . The experimental result of 23 degrees is surprising because it suggests a tendency of the methyl group toward the eclipsed configuration (0 degrees ) rather than staggered (60 degrees ). In contrast, extensive fully periodic quantum mechanical Density Functional Theory studies of this surface give an equilibrium torsion angle of 37.5 degrees , indicating a tendency toward the staggered configuration. This discrepancy can be resolved by showing that the CH3 on the step edges and etch pits interacts repulsively with the CH3 on the surface terraces unless a stacking fault is introduced between the first and second silicon layers of the Si(111)-CH3 surface terraces. We propose that this could occur during the chlorination-alkylation of the Si(111)-H surface. This stacking fault model predicted phi = 22.5 degrees measured with respect to the bulk (corresponding to phi = 37.5 degrees with respect to the second layer Si atoms). This model can be tested by measuring the orientation of the CH3 within the etch pits, which should have phi = 37.5 degrees , or by making a surface without etch pits, which should have phi = 37.5 degrees .     

Alpha-gamma hybrid peptides that contain the conformationally constrained gabapentin residue: characterization of mimetics of chain reversals

The crystal structures of four dipeptides that contain the stereochemically constrained gamma-amino acid residue gabapentin (1-(aminomethyl)cyclohexaneacetic acid Gpn) are described. The molecular conformation of Piv-Pro-Gpn-OH (1), reveals a beta-turn mimetic conformation, stabilized by a ten atom C[bond]H...O hydrogen bond between the Piv CO group and the pro S hydrogen of the Gpn CH(2)[bond]CO group. The peptides Boc-Gly-Gpn-OH (2), Boc-Aib-Gpn-OH (3), and Boc-Aib-Gpn-OMe (4) form compact, folded structures, in which a distinct reversal of polypeptide chain direction is observed. In all cases, the Gpn residue adopts a gauche,gauche (g,g) conformation about the C(gamma)[bond]C(beta) (theta(1)) and C(beta)[bond]C(alpha) (theta(2)) bonds. Two distinct Gpn conformational families are observed. In peptides 1 and 3, the average backbone torsion angle values for the Gpn residue are phi=98 degrees, theta(1)=-62 degrees, theta(2)=-73 degrees, and psi=79 degrees, while in peptide 2 and 4 the average values are phi=-103 degrees, theta(1)=-46 degrees, theta(2)=-49 degrees, and psi=-92 degrees. In the case of 1 and 3, an intramolecular nine-membered O[bond]H...O hydrogen bond is formed between the C[double bond]O of the preceding residue and the terminal carboxylic acid OH group. All four alpha-gamma dipeptide sequences yield compact folded backbone conformations; this suggests that the Gpn residue may be employed successfully in the design of novel folded structures.     

Radiolytic transformations of chlorinated phenols and chlorinated phenoxyacetic acids

Hydroxyl radical reactions of selected chlorinated aromatic phenols (2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol) and chlorinated phenoxyacetic acids [2,4-dichlorophenoxyacetic acid (2,4-D), 2,4-D methyl ester, 2-(2,4-dichlorophenoxy)propionic acid (2,4-DP)] were studied using the radiolysis techniques of pulse radiolysis and gamma radiolysis. Hydroxyl radical addition was the prominent reaction pathway for the chlorinated phenoxyacetic acids and also for the chlorinated phenols at pH values below the pK(a) of the compounds. A very prominent change in (*)OH reactivity was observed with the chlorinated phenoxide ions in high pH solutions. Two different reaction pathways were clearly present between the hydroxyl radical and the chlorinated phenoxide ions. One of the reaction pathways was suppressed when the concentration of chlorinated phenoxide ions was increased 10-fold. Amid a greater electron-withdrawing presence on the aromatic ring (higher chlorinated phenoxide ions), the hydroxyl radical reacted preferably by way of addition to the aromatic ring. Steady-state experiments utilizing gamma radiolysis also showed a substantial decrease in oxidation with an increase in pH of substrate.     

An NMR, IR and theoretical investigation of (1)H chemical shifts and hydrogen bonding in phenols

The change in (1)H NMR chemical shifts upon hydrogen bonding was investigated using both experimental and theoretical methods. The (1)H NMR spectra of a number of phenols were recorded in CDCl(3) and DMSO solvents. For phenol, 2- and 4-cyanophenol and 2-nitrophenol the OH chemical shifts were measured as a function of concentration in CDCl(3). The plots were all linear with concentration, the gradients varying from 0.940 (phenol) to 7.85 (4-cyanophenol) ppm/M because of competing inter- and intramolecular hydrogen bonding. Ab initio calculations of a model acetone/phenol system showed that the OH shielding was linear with the H...O=C distance (R) for R < 2.1 A with a shielding coefficient of - 7.8 ppm/A and proportional to cos(2)phi where phi is the H...O=C--C dihedral angle. Other geometrical parameters had little effect. It was also found that the nuclear shielding profile is unrelated to the hydrogen bonding energy profile. The dependence of the OH chemical shift on the pi density on the oxygen atom was determined as ca 40 ppm/pi electron. This factor is similar to that for NH but four times the value for sp(2) hybridized carbon atoms. The introduction of these effects into the CHARGE programme allowed the calculation of the (1)H chemical shifts of the compounds studied. The CHARGE calculations were compared with those from the ACD database and from GIAO calculations. The CHARGE calculations were more accurate than other calculations both when all the shifts were considered and also when the OH shifts were excluded. The calculations from the ACD and GIAO approaches were reasonable when the OH shifts were excluded but not as good when all the shifts were considered. The poor treatment of the OH shifts in the GIAO calculations is very likely due to the lack of explicit solvent effects in these calculations.     

Dependence of the conduction of a single biphenyl dithiol molecule on the dihedral angle between the phenyl rings and its application to a nanorectifier

The transport properties of a biphenyl dithiol (BPD) molecule sandwiched between two gold electrodes are studied using the nonequilibrium Green's function method based on the density functional theory. In particular, their dependence on the dihedral angle (phi=90 degrees -180 degrees ) between two phenyl rings is investigated. While the dihedral-angle dependence of the density of states projected on the BPD molecular orbitals is small, the transport properties change dramatically with phi. The transmission at the Fermi energy exhibits a minimum at phi=90.0 degrees and greatly increases with phi. The ratio of the maximum obtained at phi=180 degrees to the minimum exceeds 100. As an application of this characteristic transport behavior, a BPD molecule functionalized with NH(2) and NO(2) groups is considered. It is found that this molecule works as a nanorectifier.     

Molecular structure and conformations of para-methylbenzene sulfonamide and ortho-methylbenzene sulfonamide: gas electron diffraction and quantum chemical calculations study

The molecular structure and conformational properties of para-methylbenzene sulfonamide (4-MBSA) and ortho-methylbenzene sulfonamide (2-MBSA) have been studied by gas electron diffraction (GED) and quantum chemical methods (B3LYP/6-311+G** and MP2/6-31G**). Quantum chemical calculations predict the existence of two conformers for 4-MBSA with the S-N bond perpendicular to the benzene plane and the NH2 group either eclipsing or staggering the S-O bonds of the SO2 group. Both conformers possess CS symmetry. The eclipsed form is predicted to be favored by DeltaE = 0.63 kcal/mol (B3LYP) or 1.00 kcal/mol (MP2). According to the calculations, the S-N bond in 2-MBSA can possess planar direction opposite the methyl group (phi(C2C1SN) = 180 degrees ) or nonplanar direction (phi(C2C1SN) approximately 60 degrees ). In both cases, the NH2 group can adopt eclipsed or staggered orientation, resulting in a total of four stable conformers. The nonplanar eclipsed conformer (C1 symmetry) and the planar eclipsed form (CS symmetry) are predicted to be favored. According to the GED analysis, the saturated vapor over solid 4-MBSA at T = 151(3) degrees C consists as mixture of the eclipsed (78(19) %) and staggered (22(19) %) forms. The saturated vapor over solid 2-MBSA at T = 157(3) degrees C consists as a mixture of the nonplanar eclipsed (69(11) %) and planar eclipsed (31(11) %) forms.     

Stereoelectronic effects on 1H nuclear magnetic resonance chemical shifts in methoxybenzenes

Investigation of all O-methyl ethers of 1,2,3-benzenetriol and 4-methyl-1,2,3-benzenetriol (3-16) by 1H NMR spectroscopy and density-functional calculations disclosed practically useful conformational effects on 1H NMR chemical shifts in the aromatic ring. While the conversion of phenol (2) to anisole (1) causes only small positive changes of 1H NMR chemical shifts (Delta delta < 0.08 ppm) that decrease in the order Hortho > Hmeta > Hpara, the experimental O-methylation induced shifts in ortho-disubstituted phenols are largest for Hpara, Delta delta equals; 0.19 +/- 0.02 ppm (n = 11). The differences are due to different conformational behavior of the OH and OCH3 groups; while the ortho-disubstituted OH group remains planar in polyphenols due to hydrogen bonding and conjugative stabilization, the steric congestion in ortho-disubstituted anisoles outweighs the conjugative effects and forces the Ar-OCH3 torsion out of the ring plane, resulting in large stereoelectronic effects on the chemical shift of Hpara. Conformational searches and geometry optimizations for 3-16 at the B3LYP/6-31G** level, followed by B3LYP/6-311++G(2d,2p) calculations for all low-energy conformers, gave excellent correlation between computed and observed 1H NMR chemical shifts, including agreement between computed and observed chemical shift changes caused by O-methylation. The observed regularities can aid structure elucidation of partly O-methylated polyphenols, including many natural products and drugs, and are useful in connection with chemical shift predictions by desktop computer programs.     

Mesomorphous structure and properties of non-equimolar complexes of poly(ethylenimine) and perfluorooctanoic acid

A series of solid complexes, PEI-PFAO, made of poly(ethylenimine) (PEI) and perfluorooctanoic acid (PFOA) with different compositions were prepared through a "starving addition" method, where PFOA was fed into PEI solution at the molar ratio, phi(feed), of acid group to the amino group of PEI, never beyond unity. Wide-angle X-ray diffraction diagrams confirmed amorphous structure of these complexes. Small-angle X-ray scattering indicated two ordered mesomorphous structures of alpha and beta lamellar phases, with respective long periods of 2.29 and 1.15 nm in the complexes. By increasing the actual molar ratio, phi, of PFOA to the amino group of PEI, the complex structure was altered from alpha-phase dominant to beta-phase dominant. All complexes exhibited two thermal degradation processes induced by decomposition of the bound PFOA below 230 degrees C and PEI backbone at about 350 degrees C. The initiating degradation temperature, Tid, decreases with increasing phi due to the preferential degradation of the PFOA chain bound to the tertiary amino groups. The glass transition temperature, Tg, of the complex increases with phi up to the degradation of the complex of phi = 1. This increase in Tg with phi also supports an ordered alignment of the bound PFOA chains, which greatly restricts the PEI mobility. The solid surface tension, gammaS, and critical surface tension, gammac, of the complex are between 15.4 and 16.8 mN/m and between 13.5 and 15.4 mN/m, respectively. The latter is very close to or even smaller than gammac of PTFE (15 mN/m), suggesting the enrichment of CF2 and CF3 groups at the complex surfaces. The fact that the PEI-POFA complex combines high hydrophobicity with selective thermal degradation of bound fluorinated chains promises a potential of selective change and local functionalization of the surface in a well-controlled manner.     

Structural control of the photodynamics of boron-dipyrrin complexes

Boron-dipyrrin chromophores containing a 5-aryl group with or without internal steric hindrance toward aryl rotation have been synthesized and then characterized via X-ray diffraction, static and time-resolved optical spectroscopy, and theory. Compounds with a 5-phenyl or 5-(4-tert-butylphenyl) group show low fluorescence yields (approximately 0.06) and short excited-singlet-state lifetimes (approximately 500 ps), and decay primarily (>90%) by nonradiative internal conversion to the ground state. In contrast, sterically hindered analogues having an o-tolyl or mesityl group at the 5-position exhibit high fluorescence yields (approximately 0.9) and long excited-state lifetimes (approximately 6 ns). The X-ray structures indicate that the phenyl or 4-tert-butylphenyl ring lies at an angle of approximately 60 degrees with respect to the dipyrrin framework whereas the angle is approximately 80 degrees for mesityl or o-tolyl groups. The calculated potential energy surface for the phenyl-substituted complex indicates that the excited state has a second, lower energy minimum in which the nonhindered aryl ring rotates closer to the mean plane of the dipyrrin, which itself undergoes some distortion. This relaxed, distorted excited-state conformation has low radiative probability as well as a reduced energy gap from the ground state supporting a favorable vibrational overlap factor for nonradiative deactivation. Such a distorted conformation is energetically inaccessible in a complex bearing the sterically hindered o-tolyl or mesityl group at the 5-position, leading to a high radiative probability involving conformations at or near the initial Franck-Condon form of the excited state. These combined results demonstrate the critical role of aryl-ring rotation in governing the excited-state dynamics of this class of widely used dyes.     

Flexibility of "polyunsaturated fatty acid chains" and peptide backbones: A comparative ab initio study

The conformational properties of omega-3 type of polyunsaturated fatty acid (PUFA) chains and their fragments were studied using Hartree-Fock (RHF/3-21G) and DFT (B3LYP/6-31G(d)) methods. Comparisons between a unit (U) fragment of the PUFA chain and a mono N-Ac-glycine-NHMe residue show that both structures have the same sequence of sp2-sp3-sp2 atoms. The flexibility of PUFA originates in the internal rotation about the above pairs of sigma bonds. Therefore, potential energy surfaces (PESs) were generated by a scan around the terminal dihedral angles (phi t1 and phi t2) as well as the phi 1 and psi 1 dihedrals of both 1U congeners (Me-CHCH-CH2-CHCHMe and MeCONH-CH2-CONHMe) at the RHF/3-21G level of theory. An interesting similarity was found in the flexibility between the cis allylic structure and the trans peptide models. A flat landscape can be seen in the cis 1U (hepta-2,5-diene) surface, implying that several conformations are expected to be found in this (PES). An exhaustive search carried out on the 1U and 2U models revealed that straight chain structures such as trans and cis beta (phi 1 approximately psi 1 approximately 120 degrees; phi 2 approximately psi 2 approximately -120 degrees) or trans and cis extended (phi 1 approximately psi 1 approximately phi 2 approximately psi 2 approximately 120 degrees) can be formed at the lowest energy of both isomers. However, forming helical structures, such as trans helix (phi 1 approximately -120 degrees, psi 1 approximately 12 degrees; phi 2 approximately -120 degrees, psi 2 approximately 12 degrees) or cis helix (phi 1 approximately -130 degrees, psi 1 approximately 90 degrees; phi 2 approximately -145 degrees, psi 2 approximately 90 degrees) will require more energy. These six conformations, found in 2U, were selected to construct longer chains such as 3U, 4U, 5U, and 6U to obtain the thermochemistry of secondary structures. The variation in the extension or compression of the chain length turned out to be a factor of 2 between the helical and nonhelical structures. The inside diameter of the "tube" of cis helix turned out to be 3.5 A after discounting the internal H atoms. Thermodynamic functions were computed at the B3LYP/6-311+G(2d,p)//B3LYP/6-31G(d). The cis-trans isomerization energy of 1.7 +/- 0.2 kcal mol(-1) unit(-1) for all structure pairs indicates that the conformer selection was consistent. A folding energy of 0.5 +/- 0.1 kcal mol(-1) unit(-1) has been extracted from the energy comparison of the helices and most extended nonhelical structures. The entropy change associated with the folding (Delta S(folding)) is decreases faster with the degree of polymerization (n) for the cis than for the trans isomer. As a consequence, the linear relationships between (Delta G(folding)) and n for the cis and trans isomer crossed at about n = 3. This suggested that the naturally occurring cis isomer less ready to fold than the trans isomer since a greater degree of organization is exhibited by the cis isomer during the folding process. The result of this work leads to the question within the group additivity rule: could the method applied in our study of the folding of polyallylic hydrocarbons be useful in investigating the thermochemistry of protein folding?     

T-for-H exchange reaction between HTO vapor and two functional groups in an aromatic compound in a gas-solid system

The hydrogen-isotope exchange reaction (T-for-H exchange reaction) between HTO vapor and an aromatic compound having two different kinds of functional groups has been observed at several temperatures. The rate constant (k) for each functional group in the T-for-H exchange reaction was obtained by using both theA″-McKay plot method and the data observed. Comparing thesek with each other has led to the following four conclusions in the T-for-H exchange reaction. (1) The reactivity of both the COOH and OH groups increases with a rise in temperature. (2) As to the degree of the effect of the COOH group on the reactivity of monosubstituted phenols, the degree inp-hydroxybenzoic acid is greater than that inm-hydroxybenzoic acid. (3) The HAMMETT rule is useful for estimating the reactivity of a certain aromatic compound. (4) TheA″-McKay plot method is also useful not only investigating the reactivity of the compounds having one kind of functional group, but also doing the reactivity of the compounds having two different kinds of functional groups.     

Rotationally resolved electronic spectra of 9,10-dihydrophenanthrene. A "floppy" molecule in the gas phase

Rotationally resolved fluorescence excitation spectra of several bands in the S1<--S0 electronic spectrum of 9,10-dihydrophenanthrene (DHPH) have been observed and assigned. Each band was fit using rigid rotor Hamiltonians in both electronic states. Analyses of these data reveal that DHPH has a nonplanar configuration in its S0 state with a dihedral angle between the aromatic rings (phi) of approximately 21.5 degrees. The data also show that excitation of DHPH with UV light results in a more planar structure of the molecule in the electronically excited state, with phi approximately 8.5 degrees. Three prominent Franck-Condon progressions appear in the low resolution spectrum, all with fundamental frequencies lying below 300 cm(-1). Estimates of the potential energy surfaces along each of these coordinates have been obtained from analyses of the high resolution spectra. The remaining barrier to planarity in the S1 state is estimated to be approximately 2650 cm(-1) along the bridge deformation mode and is substantially reduced by excitation of the molecule along the (orthogonal) ring twisting coordinate.     

Strand breakage in poly(C), poly(A), single- and double-stranded DNA induced by nanosecond laser excitation at 193 nm.

Single- and double-stranded calf thymus DNA and two polynucleotides (0.4 mM) were studied in aqueous solution at pH approximately 7 using pulsed, 20 ns laser excitation at 193 nm. Monophotonic ionization of the nucleic acids is suggested from the linear dependences of the concentration of ejected electrons and the number of single- and double-strand breaks (ssb, dsb, respectively) on laser intensity (IL) in the range (0.2-3) x 10(6) W cm-2. The quantum yields of formation of hydrated electrons (phi e-) and ssb and dsb (phi ssb and phi dsb) are therefore independent of IL. In contrast, under 248 nm excitation these quantum yields increase linearly with IL under otherwise comparable conditions. Nevertheless, several effects and mechanistic implications are analogous using lambda exc = 193 and 248 nm. For polycytidylic acid, poly(C), in Ar-saturated solution for example, the efficiency of ssb per radical cation (eta RC = phi ssb/phi e-) is similar to the efficiency of ssb per OH radical (eta OH). For polyadenylic acid, poly(A), and single- and double-stranded DNA eta RC (lambda exc = 193 nm) is significantly smaller than eta OH. The ratio phi ssb (N2O)/phi ssb (Ar) is approximately 2 for poly(C), approximately 4 for poly(A) approximately 10 for DNA; the conversion of hydrated electrons into OH radicals in N2O-saturated solution and smaller eta RC than eta OH values in the case of DNA account for these results. For double-stranded DNA phi dsb does not depend on IL but increases linearly with the dose, indicating an accumulative effect of two ssb to generate one dsb. The critical distance for this event is 60-85 phosphoric acid diester bonds.     

Prompt HO2 formation following the reaction of OH with aromatic compounds under atmospheric conditions

The secondary formation of HO(2) radicals following OH + aromatic hydrocarbon reactions in synthetic air under normal pressure and temperature was investigated in the absence of NO after pulsed production of OH radicals. OH and HO(x) (=OH + HO(2)) decay curves were recorded using laser-induced fluorescence after gas-expansion. The prompt HO(2) yields (HO(2) formed without preceding NO reactions) were determined by comparison to results obtained with CO as a reference compound. This approach was recently introduced and applied to the OH + benzene reaction and was extended here for a number of monocyclic aromatic hydrocarbons. The measured HO(2) formation yields are as follows: toluene, 0.42 ± 0.11; ethylbenzene, 0.53 ± 0.10; o-xylene, 0.41 ± 0.08; m-xylene, 0.27 ± 0.06; p-xylene, 0.40 ± 0.09; 1,2,3-trimethylbenzene, 0.31 ± 0.06; 1,2,4-trimethylbenzene, 0.37 ± 0.09; 1,3,5-trimethylbenzene, 0.29 ± 0.08; hexamethylbenzene, 0.32 ± 0.08; phenol, 0.89 ± 0.29; o-cresol, 0.87 ± 0.29; 2,5-dimethylphenol, 0.72 ± 0.12; 2,4,6-trimethylphenol, 0.45 ± 0.13. For the alkylbenzenes HO(2) is the proposed coproduct of phenols, epoxides, and possibly oxepins formed in secondary reactions with O(2). In most product studies the only quantified coproducts were phenols whereas only a few studies reported yields of epoxides. Oxepins have not been observed so far. Together with the yields of phenols from other studies, the HO(2) yields determined in this work set an upper limit to the combined yields of epoxides and oxepins that was found to be significant (≤0.3) for all investigated alkylbenzenes except m-xylene. For the hydroxybenzenes the currently proposed HO(2) coproducts are dihydroxybenzenes. For phenol and o-cresol the determined HO(2) yields are matching the previously reported dihydroxybenzene yields, indicating that these are the only HO(2) forming reaction channels. For 2,5-dimethylphenol and 2,4,6-trimethylphenol no complementary product studies are available.     

Direct transition-metal-free intramolecular arylation of phenols

Direct transition-metal-free, base-mediated intramolecular arylation of phenols with aryl halides has been developed. In the presence of 2.5 equiv of t-BuOK in dioxane at 140 degrees C, the intramolecular cyclization of 3-(2-halobenzyloxy)phenols affords 6H-benzo[c]chromenes in high yields. This reaction proceeds by an initial formation of a benzyne intermediate followed by an aromatic sp(2) C-H functionalization (a formal C-H activation) to form the carbon-carbon bond.     

Investigation of the polymorphs of dimethyl-3,6-dichloro-2,5-dihydroxyterephthalate by (13)C solid-state NMR spectroscopy.

Two of the three conformational polymorphs of dimethyl-3,6-dichloro-2,5-dihydroxyterephthalate are studied by solid-state NMR techniques. The structural differences between the polymorphs have previously been studied by X-ray. In these two polymorphs named white and yellow due to their color, the major structural difference is the torsional angle between the ester group and the aromatic ring. The yellow form has a dihedral angle of 4 degrees between the plane of the aromatic ring and the plane of the ester group, while the white form has two different molecules per unit cell with dihedral angles of 70 degrees and 85 degrees. This change greatly affects the conjugation in the pi-electronic system. In addition, there are differences in the hydrogen-bonding patterns, with the white form having intermolecular hydrogen bonds and the yellow form having intramolecular hydrogen bonds. In this work, the carbon isotropic chemical shift values and the chlorine electric field gradient (EFG) tensor information are extracted from the (13)C MAS spectra, and the principal values of the chemical shift tensors of the carbons are obtained from 2D FIREMAT experiments. Quantum chemical calculations of the chemical shift tensor data as well as the EFG tensor are performed at the HF and DFT levels of theory on individual molecules and on stacks of three molecules to account for the important intermolecular interactions in the white form. The differences between the spectral data on the two polymorphs are discussed in terms of the known electronic and structural differences.     

Metal-assisted reactions—13 : Rapid, slective reductive cleavage of phenolic hydroxyl groups by catalytic transfer methods

Previous work has shown that, after converting phenols into suitable phenolic ethers, the aromatic C---H bond of the original phenol can be reductively cleaved heterogeneously to give a C---H bond through the use of molecular hydrogen or hydrogen donors together with a transition metal catalyst. The present work provides a method for selectively replacing a phenolic OH group by H in just a few minutes, compared with the 2 to 4 hr required previously using a hydrogen donor and the several hours under pressure required for molecular hydrogen. Various kinds of groups are suitable for preparing the required phenolic ethers from phenols, but the best ones are strongly electro-withdrawing heteroaromatic entities. Solvent appears to play an important role in this heterogeneous reaction, the mechanism of which is discussed.     

Regioselective bromination of activated aromatic substrates with a ZrBr4/diazene mixture

A regioselective method for the bromination of phenols, ethers and anilines using a ZrBr₄/diazene mixture is described. The reaction takes place under mild reaction conditions and the bromine atom adds first at the para unsubstituted position with respect to the OH, OR or NR₂ group of the activated aromatic substrate. Less reactive compounds such as toluene, phenyl acetate, benzonitrile and trifluoromethylbenzene remain intact under the same conditions.