染料敏化太阳电池钌系敏化剂

钌系敏化剂是染料敏化太阳电池（DSSC）研究最早也最成功的敏化剂类型之一,最高光电转换效率已达到11%以上。研究总结钌系敏化剂的结构、谱学性质、电化学性质与其光电转换性能之间的构效关系,对于设计合成新的具有更高性能的敏化剂、推进DSSC的实用化进程具有十分重要的意义。本文综述了钌系敏化剂的研究进展,将这类敏化剂按结构和性质进行分类,讨论了其分子结构、电子结构、谱学性质、电化学性质对其光吸收能力、电子注入效能、电荷传输与复合等因素的影响,并对其光电转换性能进行了详细评述,总结了其结构与光电转换性能之间的构效关系,概括了高效钌系敏化剂的结构特征,为更高效敏化剂的设计合成提供了有价值的参考。     

Highly Efficient Dye‐Sensitized Solar Cells Based on Panchromatic Ruthenium Sensitizers with Quinolinylbipyridine Anchors

Panchromatic Ru^II sensitizers TF‐30–TF‐33 bearing a new class of 6‐quinolin‐8‐yl‐2,2′‐bipyridine anchor were synthesized and tested under AM1.5 G simulated solar irradiation. Their increased π conjugation relative to that of the traditional 2,2′:6′,2′′‐terpyridine‐based anchor led to a remarkable improvement in absorptivity across the whole UV–Vis–NIR spectral regime. Furthermore, the introduction of a bulky tert‐butyl substituent on the quinolinyl fragment not only led to an increase in the J_SC value owing to the suppression of dye aggregation, but remarkably also resulted in no loss in V_OC in comparison with the reference sensitizer containing a tricarboxyterpyridine anchor. The champion sensitizer in DSC devices was found to be TF‐32 with a performance of J_SC=19.2 mA cm^?2, V_OC=740 mV, FF=0.72, and η=10.19 %. This 6‐quinolin‐8‐yl‐2,2′‐bipyridine anchor thus serves as a prototype for the next generation of Ru^II sensitizers with any tridentate ancillary.     

Cyclometalated Ruthenium(II) Complexes Featuring Tridentate Click‐Derived Ligands for Dye‐Sensitized Solar Cell Applications

A series of heteroleptic bis(tridentate) Ru^II complexes featuring N^C^N‐cyclometalating ligands is presented. The 1,2,3‐triazole‐containing tridentate ligands are readily functionalized with hydrophobic side chains by means of click chemistry and the corresponding cyclometalated Ru^II complexes are easily synthesized. The performance of these thiocyanate‐free complexes in a dye‐sensitized solar cell was tested and a power conversion efficiency (PCE) of up to 4.0 % (J_sc=8.1 mA cm^?2, V_oc=0.66 V, FF=0.70) was achieved, while the black dye ((NBu₄)₃[Ru(Htctpy)(NCS)₃]; Htctpy=2,2′:6′,2′′‐terpyridine‐4′‐carboxylic acid‐4,4′′‐dicarboxylate) showed 5.2 % (J_sc=10.7 mA cm^?2, V_oc=0.69 V, FF=0.69) under comparable conditions. When co‐adsorbed with chenodeoxycholic acid, the PCE of the best cyclometalated dye could be improved to 4.5 % (J_sc=9.4 mA cm^?2, V_oc=0.65 V, FF=0.70). The PCEs correlate well with the light‐harvesting capabilities of the dyes, while a comparable incident photon‐to‐current efficiency was achieved with the cyclometalated dye and the black dye. Regeneration appeared to be efficient in the parent dye, despite the high energy of the highest occupied molecular orbital. The device performance was investigated in more detail by electrochemical impedance spectroscopy. Ultimately, a promising Ru^II sensitizer platform is presented that features a highly functionalizable “click”‐derived cyclometalating ligand.     

Recent Investigations on Thiocyanate-Free Ruthenium(II) 2,2′-Bipyridyl Complexes for Dye-Sensitized Solar Cells

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a method for harnessing the energy of the sun and for converting it into electricity. Since then, a lot of work has been devoted to create better global photovoltaic efficiencies and long term stability. Among photosensitizers for DSSCs, thiocyanate-free ruthenium(II) complexes have gained increasing interest due to their better stability compared to conventional thiocyanate-based complexes, such as benchmark dyes N719 and Z907. In this mini-review, two classes of thiocyanate-free Ru(II) complexes are presented: (a) bis-bipyridyl compounds bearing an ancillary cyclometalating bidentate ligand; (b) bipyridyl compounds bearing non-cyclometalating ancillary ligands. The coverage, mainly from 2014 up to now, is not exhaustive, but illustrates the most recent design strategies and photovoltaic properties of these two families of ruthenium(II) dyes.     

New Amphiphilic Polypyridyl Ruthenium（Ⅱ） Sensitizer and Its Application in Dye-Sensitized Solar Cells

Amphiphilic polypyridyl mthenium（Ⅱ） complex cis-di（isothiocyanato）（4,4＇-di-tert-butyl-2,2＇-bipyridyl）（4,4＇- dicarboxy-2,2＇-bipyridyl）ruthenium（Ⅱ）（K005） has been synthesized and characterized by cyclic voltammetry, ^1H NMR, UV-Vis, and FT-IR spectroscopies. The sensitizer sensitizes TiO2 over a notably broad spectral range due to its intense metal-to-ligand charge-transfer （MLCT） bands at 537 and 418 nm. The photophysical and photochemical studies of K005 were contrasted with those of cis-Ru（dcbpy）2（NCS）2, known as the N3 dye, and the amphiphilic ruthenium（Ⅱ） dye Z907. A reversible couple at E1/2=0.725 V vs. saturated calomel electrode （SCE） with a separation of 0.08 V between the anodic and cathodic peaks, was observed due to the Ru^Ⅱ/Ⅲ couple by cyclic voltammetry. Furthermore, this amphiphilic ruthenium complex was successfully used as sensitizers for dye-sensitized solar cells with the efficiency of 3.72% at the 100 mW·cm^-2 irradiance of air mass 1.5 simulated sunlight without optimization of TiO2 films and the electrolyte.     

多酸基光敏剂在染料敏化太阳能电池中的应用

染料敏化太阳能电池(dye-sensitized solar cells,简写为DSSCs)是由Michael Gr覿tzel等开发的第三代光伏电池,它具有低成本、制作简单、光学性能可调、光电转换效率高等优势。其中光敏剂是DSSCs的重要组成部分,通过吸收可见光将电子传递到半导体导带,对整个电池的电子循环至关重要。广泛采用的光敏剂为N719等贵金属配合物,但其价格非常昂贵,很难实现大规模产业化。因此寻找低成本的非贵金属光敏剂是该领域的一项挑战。多金属氧酸盐(简称多酸,Polyoxometalates,简写为POMs)是一类具有纳米尺寸的分子基纳米材料,是分子型无机类半导体材料。多酸的富氧表面可以被活化和修饰,吸收光谱可以覆盖可见区甚至近红外区,具有合适的氧化还原电势,良好的热稳定性和溶解性。近年来,一系列研究表明多酸可以作为光敏剂应用在DSSCs中。本文中,我们以课题组多年来在POMs和太阳能电池领域的研究工作积累以及国内外同行专家的研究工作为基础,对多酸基光敏剂在DSSCs中的应用进行了详细综述。首先我们阐述了DSSCs的研究意义、多酸的简介、多酸的能级测量及调控。之后我们重点综述了多酸作为DSSCs中的光敏剂和共敏剂的研究。最后,我们对多酸基光敏剂在DSSCs领域的发展前景进行了总结和展望。本文有望引起多酸化学、材料化学及新兴交叉学科领域研究者的广泛研究兴趣,并为太阳能电池光敏剂的研究提供新的思路。     

含双吸电子基团的三苯胺染料在太阳电池中的应用

合成了两种具有不同共轭链长度的双吸电子基团的三苯胺类染料TPAR3和TPAR6, 研究了它们的光物理与光电化学性质, 并将它们用作TiO2纳米晶电极的光敏化剂引入太阳电池. 结果表明, 与含有乙烯基共轭桥的染料TPAR3相比, 含有丁二烯基共轭桥的染料TPAR6在甲醇溶液和TiO2膜上的最大吸收均发生一定程度的红移和宽化; 但TPAR6表现出比TPAR3差的光电性能, 主要是因为前者更易发生顺反异构化, 电子不能够顺利地从染料激发态注入到TiO2导带中, 光电流的产生得到抑制. 考察了基于TPAR3的太阳电池在电解液中加入不同浓度的硫氰酸胍(GT)对光电性能的影响, 发现在GT浓度为0.100 mol·L-1时效率达到最大(4.02%).     

Application of Triphenylamine-Based Sensitizers with Two Carboxylic Acid Groups to Dye-Sensitized Solar Cells

Two triphenylamine-based dyes (TPAR3 and TPAR6) containing two carboxylic acid groups with different conjugated lengths were synthesized and characterized with regard to their photophysical and photoelectrochemical properties. Experimental results showed that the λ_max of TPAR6 either in methanol solution or on TiO₂ film was red-shifted and broadened by extending the π-conjugated bridge. However, the performance of TPAR3-based dye-sensitized solar cell (DSC) was superior to that of TPAR6. This reason was due to the serious self-quenching of the electronically excited state in TPAR6 molecule, resulting from its cis-trans isomerization. The effects of addition of guanidinium thiocyanate (GT) in the electrolyte on the performance of DSCs based on TPAR3 were also investigated, revealing a maximum energy conversion efficiency of 4.02% at 0.100 mol·L⁻¹ GT.     

Terpyridine Based Heteroleptic Ruthenium Complexes: Influence of Donor and Acceptor Ligands in Photosensitization

We report heteroleptic ruthenium complexes of terpyridine (tpy) ligands with directly linked carboxylic acid anchors. These complexes feature methyl or methoxy-substituted ^4′−Phtpy as donor ligands. We prepared these heteroleptic complexes from the ruthenium (II) precursor via a milder route to preclude the homoleptic complex formation. The donor−acceptor arrangement of tpy ligands in these ruthenium complexes renders visible light absorption giving metal and ligand-to-ligand charge transfer excitations at c.a. 490 nm. We evaluate the effect of the tpy donor substituents on the light-harvesting ability in Dye-Sensitized Solar Cells (DSSCs) and compare their photosensitizing ability with heteroleptic complexes bearing phenyl spacer at the acceptor end. Further, scrutinizing their photovoltaic performance, we studied their electron transfer kinetics in DSSCs using electrochemical impedance spectroscopy. This paper presents the structure-photosensitization relationship of these heteroleptic ruthenium complexes through a combined experimental and computational approach.     

Application of the Tris(acetylacetonato)iron(III)/(II) Redox Couple in p‐Type Dye‐Sensitized Solar Cells

An electrolyte based on the tris(acetylacetonato)iron(III)/(II) redox couple ([Fe(acac)₃]^0/1?) was developed for p‐type dye‐sensitized solar cells (DSSCs). Introduction of a NiO blocking layer on the working electrode and the use of chenodeoxycholic acid in the electrolyte enhanced device performance by improving the photocurrent. Devices containing [Fe(acac)₃]^0/1? and a perylene–thiophene–triphenylamine sensitizer (PMI–6T–TPA) have the highest reported short‐circuit current (J_SC=7.65 mA cm^?2), and energy conversion efficiency (2.51 %) for p‐type DSSCs coupled with a fill factor of 0.51 and an open‐circuit voltage V_OC=645 mV. Measurement of the kinetics of dye regeneration by the redox mediator revealed that the process is diffusion limited as the dye‐regeneration rate constant (1.7×10⁸ M ^?1 s^?1) is very close to the maximum theoretical rate constant of 3.3×10⁸ M ^?1 s^?1. Consequently, a very high dye‐regeneration yield (>99 %) could be calculated for these devices.     

Unsymmetric Platinum(II) Bis(aryleneethynylene) Complexes as Photosensitizers for Dye‐Sensitized Solar Cells

Four new unsymmetric platinum(II) bis(aryleneethynylene) derivatives have been designed and synthesized, which showed good light‐harvesting capabilities for application as photosensitizers in dye‐sensitized solar cells (DSSCs). The absorption, electrochemical, time‐dependent density functional theory (TD‐DFT), impedance spectroscopic, and photovoltaic properties of these platinum(II)‐based sensitizers have been fully characterized. The optical and TD‐DFT studies show that the incorporation of a strongly electron‐donating group significantly enhances the absorption abilities of the complexes. The maximum absorption wavelength of these four organometallic dyes can be tuned by various structural modifications of the triphenylamine and/or thiophene electron donor, improving the light absorption range up to 650 nm. The photovoltaic performance of these dyes as photosensitizers in mesoporous TiO₂ solar cells was investigated, and a power conversion efficiency as high as 1.57 % was achieved, with an open‐circuit voltage of 0.59 V, short‐circuit current density of 3.63 mA cm^?2, and fill factor of 0.73 under simulated AM 1.5G solar illumination.     

聚吡咯/石墨复合对电极在染料敏化太阳能电池中的应用研究

通过化学氧化法制备了聚吡咯纳米粒子, 并将其与石墨共混旋涂于ITO导电玻璃上, 作为染料敏化太阳能电池的对电极. 通过SEM观察到聚吡咯纳米粒子粒径在80～100 nm之间, 循环伏安测试表明聚吡咯电极对I₂/I^－电解质氧化还原体系具有较好的催化能力. 光伏电池的电化学交流阻抗测试结果说明掺入石墨后可有效降低聚吡咯对电极的电荷转移阻抗. 以钌染料N719为光敏剂, 聚吡咯/石墨复合电极为对电极组装成的染料敏化太阳能电池, 在AM 1.5 (100 mW•cm^－2) 的模拟太阳光照射下, 得到6.01%的光电转换效率, 达到相同条件下铂对电极性能的92%.     

Tris‐Heteroleptic Ruthenium–Dipyrrinate Chromophores in a Dye‐Sensitized Solar Cell

Two novel tris‐heteroleptic Ru–dipyrrinates were prepared and tested as sensitizers in the dye‐sensitized solar cell (DSSC). Under AM 1.5 sunlight, DSSCs employing these dyes achieved power conversion efficiencies (PCEs) of 3.4 and 2.2 %, substantially exceeding the value achieved previously with a bis‐heteroleptic dye (0.75 %). As shown by electrochemical measurements and DFT calculations, the improved PCEs stem from the synthetically tuned electronic structure, which affords more negative excited state redox potentials and favorable electron injection into the TiO₂ conduction band. Electron injection was quantified by nanosecond transient absorption spectroscopy, which revealed that the highest injection yield is achieved with the dye that acts as the strongest photoreductant.