Evaluation of 27Al and 51V electric field gradients and the crystal structure for aluminum orthovanadate (AlVO4) by density functional theory calculations

Three sets of crystal-structure data reported for AlVO(4) from two powder-XRD studies and a density functional theory (DFT) investigation, employing the Vienna ab initio simulation package (VASP), have been examined and refined using the DFT structure-optimization scheme implemented in the WIEN2k software. The crystal structures are evaluated on the basis of (27)Al and (51)V quadrupole coupling parameters recently reported for AlVO(4), employing the corresponding electric-field gradient (EFG) tensor elements obtained from the DFT calculations. The DFT calculations provide a reliable assignment of the (27)Al/(51)V resonances from three distinct Al and three V environments to the specific crystallographic sites in the asymmetric unit for AlVO(4). An improved agreement between experimental quadrupole tensor elements and calculated EFG tensors is achieved after the DFT structure optimizations and consistent results are obtained using the three different structures as starting points. The improvement of the structural data is also supported by an evaluation of the Al-O and V-O bond lengths before and after DFT structure optimization. The (51)V nuclear quadrupole moment, |Q((51)V)| = 4.8 +/- 0.1 fm(2), derived from the present analysis, represents a value of higher accuracy than earlier reported Q((51)V) values. The origin of the (27)Al and (51)V EFGs are investigated by an evaluation of the orientations of the EFG tensors in the crystal frame and by an examination of the individual contributions from the valence electrons and the surrounding lattice. The latter investigation shows that the magnitude and orientation of the tensors are largely determined by the p-p((27)Al) and p-p, d-d((51)V) orbital contributions to the valence electrons, while the lattice part only gives a minor contribution for both nuclei.     

Advances in structural analysis of fluoroaluminates using DFT calculations of 27Al electric field gradients

Based on the analysis of 23 aluminum sites from 16 fluoroaluminates, the present work demonstrates the strong potential of combining accurate NMR quadrupolar parameter measurements, density functional theory (DFT)-based calculations of electric field gradients (EFG), and structure optimizations as implemented in the WIEN2k package for the structural and electronic characterizations of crystalline inorganic materials. Structure optimizations are essential for compounds whose structure was refined from usually less accurate powder diffraction data and provide a reliable assignment of the 27Al quadrupolar parameters to the aluminum sites in the studied compounds. The correlation between experimental and calculated EFG tensor elements leads to the proposition of a new value of the 27Al nuclear quadrupole moment Q(27Al) = 1.616 (+/-0.024) x 10(-29) m2. The DFT calculations provide the orientation of the 27Al EFG tensors in the crystal frame. Electron density maps support that the magnitude and orientation of the 27Al EFG tensors in fluoroaluminates mainly result from the asymmetric distribution of the Al 3p orbital valence electrons. In most cases, the definition of relevant radial and angular distortion indices, relying on EFG orientation, allows correlations between these distortions and magnitude and sign of the Vii.     

Hydrothermal synthesis and crystal structure of two new hydrated alkaline earth metal borates Sr3B6O11(OH)2 and Ba3B6O11(OH)2

Two new hydrated borates Sr(3)B(6)O(11)(OH)(2) (1) and Ba(3)B(6)O(11)(OH)(2) (2) were hydrothermally synthesized. Their structures were determined by single-crystal X-ray diffraction and further characterized by IR, powder XRD, and DSC/TGA. Compound 1 crystallizes in the triclinic space group P-1 with unit cell parameters of a = 6.6275(13) ?, b = 6.6706(13) ?, c = 11.393(2) ?, α = 91.06(3)°, β = 94.50(3)°, and γ = 93.12(3)°, while compound 2 crystallizes in the noncentrosymmetric monoclinic space group Pc with a = 6.958(14) ?, b = 7.024(14) ?, c = 11.346(2) ?, and β = 90.10(3)°. In spite of the differences in symmetry and packing of the borate chains, both structures consist of the same fundamental building block (FBB) of a [B(6)O(11)(OH)(2)](-6) unit and three unique alkaline earth metal atoms.     

Two novel acentric borate fluorides: M3B6O11F2 (M = Sr, Ba)

Two novel, noncentrosymmetric borate fluorides, Sr(3)B(6)O(11)F(2) and Ba(3)B(6)O(11)F(2), have been synthesized hydrothermally and their structures determined. The compounds are isostructural, crystallizing in space group P2(1), having lattice parameters of a = 6.4093 (13) ?, b = 8.2898 (17) ?, c = 9.3656 (19) ?, and β = 101.51 (3)° for Sr(3)B(6)O(11)F(2) and a = 6.5572 (13) ?, b = 8.5107 (17) ?, c = 9.6726 (19) ?, and β = 101.21 (3)° for Ba(3)B(6)O(11)F(2). The structure consists of a complex triple-ring borate framework having aligned triangular [BO(3)] groups that impart polarity. Fluorine atoms are bound only to the alkaline-earth metals and are not part of the borate framework, resulting in a vastly different structure from those of the hydrated borates Sr(3)B(6)O(11)(OH)(2) and Ba(3)B(6)O(11)(OH)(2) with similar formulas. The title compounds are transparent to nearly 200 nm, making them potentially useful for deep-ultraviolet nonlinear-optical applications.     

DFT calculations as a powerful technique to probe the crystal structure of Al(acac)3

(27)Al, (17)O and (13)C chemical shieldings of aluminum acetylacetonate complex, Al(acac)(3), were calculated at some Density Functional Theory (DFT) levels of theory. In these calculations the X-ray structures of its different polymorphs were used. Using these calculated data observed discrepancies between the X-ray crystallography and solid state NMR experiment were explained in terms of the quality of the NMR data. In this survey we resorted to the simulated spectra using our calculated chemical shifts. In order to confirm our conclusions, electric field gradient (EFG) tensors of the (27)Al and (17)O nuclei were calculated at the same levels of theory as used in the chemical shielding calculations. On the other hand, these calculated chemical shifts and nuclear quadrupole coupling constants (NQCCs) made a correlation between X-ray crystallography and solid state NMR experiments.     

A computational investigation of 11B electric field gradient and chemical shielding tensors as well as NBO analysis in the B80 fullerene

Using first-principles calculations within the frame of the density functional theory, we analyze electronic properties of the boron fullerene B80, based on NMR, NQR parameters and NBO analysis. Our results show three typical ranges for boron chemical shielding parameters corresponding to each of the nonequivalent magnetic sites of the B atoms. These three sites are related to frame atoms and two sets of atoms capping hexagons, endohadral and exohedral caps. Calculating quadrupole coupling components confirm this conclusion with more sensitivity than chemical shielding parameters. In addition calculated asymmetry parameter shows that EFG tensor for boron atoms capping hexagons is axially symmetric, η ≈ 0, while this tensor becomes considerably asymmetric for frame atoms, η = 0.95, as a result of charge transfer from 20 boron atoms capping hexagons to the 60 frame atoms.     

Experimental and theoretical studies of 45Sc NMR interactions in solids

Solid-state 45Sc NMR spectroscopy, ab initio calculations, and X-ray crystallography are applied to examine the relationships between 45Sc NMR interactions and molecular structure and symmetry. Solid-state 45Sc (I = 7/2) magic-angle spinning (MAS) and static NMR spectra of powdered samples of Sc(acac)3, Sc(TMHD)3, Sc(NO3)3.5H2O, Sc(OAc)3, ScCl3.6H2O, ScCl3.3THF, and ScCp3 have been acquired. These systems provide a variety of scandium coordination environments yielding an array of distinct 45Sc chemical shielding (CS) and electric field gradient (EFG) tensor parameters. Acquisition of spectra at two distinct magnetic fields allows for the first observations of scandium chemical shielding anisotropy (CSA). 45Sc quadrupolar coupling constants (CQ) range from 3.9 to 13.1 MHz and correlate directly with the symmetry of the scandium coordination environment. Single-crystal X-ray structures were determined for Sc(TMHD)3, ScCl3.6H2O, and Sc(NO3)3.5H2O to establish the hitherto unknown scandium coordination environments. A comprehensive series of ab initio calculations of EFG and CS tensor parameters are in excellent agreement with the observed parameters. Theoretically determined orientations of the NMR interaction tensors allow for correlations between NMR tensor characteristics and scandium environments. Solid-state 45Sc, 13C, and 19F NMR experiments are also applied to characterize the structures of the microcrystalline Lewis acid catalyst Sc(OTf)3 (for which the crystal structure is unknown) and a noncrystalline, microencapsulated, polystyrene-supported form of the compound.     

Characterization of divalent metal metavanadates by 51V magic-angle spinning NMR spectroscopy of the central and satellite transitions

51V quadrupole coupling and chemical shielding tensors have been determined from 51V magic-angle spinning (MAS) NMR spectra at a magnetic field of 14.1 T for nine divalent metal metavanadates: Mg(VO3)2, Ca(VO3)2, Ca(VO3)(2).4H2O, alpha-Sr(VO3)2, Zn(VO3)2, alpha- and beta-Cd(VO3)2. The manifold of spinning sidebands (ssbs) from the central and satellite transitions, observed in the 15V MAS NMR spectra, have been analyzed using least-squares fitting and numerical error analysis. This has led to a precise determination of the eight NMR parameters characterizing the magnitudes and relative orientations of the quadrupole coupling and chemical shielding tensors. The optimized data show strong similarities between the NMR parameters for the isostructural groups of divalent metal metavanadates. This demonstrates that different types of metavanadates can easily be distinguished by their anisotropic NMR parameters. The brannerite type of divalent metal metavanadates exhibits very strong 51V quadrupole couplings (i.e., CQ = 6.46-7.50 MHz), which reflect the highly distorted octahedral environments for the V5+ ion in these phases. Linear correlations between the principal tensor elements for the 51V quadrupole coupling tensors and electric field gradient tensor elements, estimated from point-monopole calculations, are reported for the divalent metal metavanadates. These correlations are used in the assignment of the NMR parameters for the different crystallographic 51V sites of Ca(VO3)(2).4H2O, Pb(VO3)2, and Ba(VO3)2. For alpha-Sr(VO3)2, with an unknown crystal structure, the 51V NMR data strongly suggest that this metavanadate is isostructural with Ba(VO3)2, for which the crystal structure has been reported. Finally, the chemical shielding parameters for orthovanadates and mono- and divalent metal metavanadates are compared.     

Solid-state 25Mg NMR spectroscopic and computational studies of organic compounds. square-pyramidal magnesium(II) ions in aqua(magnesium) phthalocyanine and chlorophyll a

We report a solid-state (25)Mg NMR spectroscopic study of two magnesium-containing organic compounds: monopyridinated aqua(magnesium) phthalocyanine (MgPc.H(2)O.Py) and chlorophyll a (Chla). Each of these compounds contains a Mg(II) ion coordinating to four nitrogen atoms and a water molecule in a square-pyramidal geometry. Solid-state (25)Mg NMR spectra for MgPc.H(2)O.Py were obtained at 11.7 T (500 MHz for (1)H) for a (25)Mg-enriched sample (99.1% (25)Mg atom) using both Hahn-echo and quadrupole Carr-Purcell Meiboom-Gill (QCPMG) pulse sequences. Solid-state (25)Mg NMR spectra for Chla were recorded at (25)Mg natural abundance (10.1%) at 19.6 T (830 MHz for (1)H). The (25)Mg quadrupole parameters were determined from spectral analyses: MgPc.H(2)O.Py, C(Q) = 13.0 +/- 0.1 MHz and eta(Q) = 0.00 +/- 0.05; Chla, C(Q) = 12.9 +/- 0.1 MHz and eta(Q) = 1.00 +/- 0.05. This work represents the first time that Mg(II) ions in a square-pyramidal geometry have been characterized by solid-state (25)Mg NMR spectroscopy. Extensive quantum mechanical calculations for electric-field-gradient (EFG) and chemical shielding tensors were performed at restricted Hartee-Fock (RHF), density functional theory (DFT), and second-order M?ller-Plesset perturbation theory (MP2) levels for both compounds. Computed (25)Mg nuclear quadrupole coupling constants at the RHF and MP2 levels show a reasonable basis-set convergence at the cc-pV5Z basis set (within 7% of the experimental value); however, B3LYP results display a drastic divergence beyond the cc-pVTZ basis set. A new crystal structure for MgPc.H(2)O.Py is also reported.     

Solid-state (55)Mn NMR spectroscopy of bis(μ-oxo)dimanganese(IV) [Mn(2)O(2)(salpn)(2)], a model for the oxygen evolving complex in photosystem II

We have examined the antiferromagneticly coupled bis(μ-oxo)dimanganese(IV) complex [Mn(2)O(2)(salpn)(2)] (1) with (55)Mn solid-state NMR at cryogenic temperatures and first-principle theory. The extracted values of the (55)Mn quadrupole coupling constant, C(Q), and its asymmetry parameter, η(Q), for 1 are 24.7 MHz and 0.43, respectively. Further, there was a large anisotropic contribution to the shielding of each Mn(4+), i.e. a Δσ of 3375 ppm. Utilizing broken symmetry density functional theory, the predicted values of the electric field gradient (EFG) or equivalently the C(Q) and η(Q) at ZORA, PBE QZ4P all electron level of theory are 23.4 MHz and 0.68, respectively, in good agreement with experimental observations.     

Determination of the mode and efficacy of the cross-linking of guar by borate using MAS 11B NMR of borate cross-linked guar in combination with solution 11B NMR of model systems

The reaction product of boric acid and the polysaccharide guaran (the major component of guar gum) has been investigated by 11B NMR spectroscopy. By comparison with the 11B NMR of boric acid and phenylboronic acid complexes of 1,2-diols (HOCMe2CMe2OH, cis-C6H10(OH)2, trans-C6H10(OH)2, o-C6H4(OH)2), 1,3-diols (neol-H2), monosaccharides (L-fucose, mannose and galactose) and disaccharides (cellobiose and sucrose) it is found that the guaran polymer is cross-linked via a borate complex of two 1,2-diols both forming chelate 5-membered ring cycles ([B5(2)]), this contrasts with previous proposals. Based upon steric constraints we propose that preferential cross-linking the guaran polymer occurs via the 3,4-diols of the galactose side chain. The DeltaH and DeltaS for complexation of boric acid to cis- and trans-1,2-cyclohexanediol have been determined, from the temperature dependence of the appropriate equilibrium constants, and used in conjunction with ab initio calculations on model compounds, to understand prior conflicting proposals for guaran-boric acid interactions. 11B NMR derived pH dependent equilibrium constants and ab initio calculations have been used to understand the reasons for the inefficiency of boric acid to cross-link guaran (almost 2 borate ions per 3 monosaccharide repeat units are required for a viscous gel suitable as a fracturing fluid): the most reactive sites on the component saccharides (mannose and galactose) are precluded from reaction by the nature of the guar structure; the comparable acidity (pKa) of the remaining guaran alcohol substituents and the water solvent, results in a competition between cross-linking and borate formation; a significant fraction of the boric acid is ineffective in cross-linking guar due to the modest equilibrium (Keq). In contrast to prior work, we present evidence for the reaction of alcohols with boric acid, rather than the borate anion. Based upon the results obtained for phenylboronic acid, alternative cross-linking agents are proposed.     

Solid-state (14)N MAS NMR of ammonium ions as a spy to structural insights for ammonium salts

The high resolution offered by magic-angle spinning (MAS), when compared to the static condition in solid-state NMR of powders, has been used to full advantage in a (14)N MAS NMR study of some ammonium salts: CH(3)NH(3)Cl, (NH(4))(2)(COO)(2) x H(2)O, (CH(3))(3)(C(6)H(5)CH(2))NCl, (CH(3))(3)(C(6)H(5))NI, [(n-C(4)H(9))(4)N](2)Mo(2)O(7), (NH(4))(2)HPO(4), and NH(4)H(2)PO(4). It is shown that the high-quality (14)N MAS NMR spectra, which can be obtained for these salts, allow determination of the (14)N quadrupole coupling parameters, i.e. C(Q) (the quadrupole coupling constant) and eta(Q) (the asymmetry parameter), with very high precision. In particular, it is shown that precise C(Q), eta(Q) parameters can be determined for at least two different (14)N sites in case the individual spinning-sideband (ssb) intensities arise from a single manifold of ssbs, i.e. the ssbs for the two sites cannot be resolved. This feature of (14)N MAS NMR, which is the first demonstration for manifolds of ssb in MAS NMR without the potential information from a central transition, becomes especially useful at the slow spinning frequencies (nu(r) = 1000-1500 Hz) applied to some of the ammonium salts studied here. The detection of the number of sites has been confirmed by the corresponding crystal structures determined from single-crystal X-ray diffraction (XRD), either in this work for the unknown structure of benzyl trimethylammonium chloride or from reports in the literature. The magnitudes of the (14)N quadrupole coupling constants for the ammonium salts studied here are in the range from C(Q) approximately 20 kHz to 1 MHz while the asymmetry parameters span the full range 0 < or = eta(Q) < or = 1. Clearly, the (14)N quadrupole coupling parameters (C(Q), eta(Q)) for ammonium ions appear highly sensitive toward crystal structure and therefore appreciably more informative for the characterization of ammonium salts in comparison to the isotropic (14)N (or (15)N) chemical shifts.     

Esterification of borate with NAD+ and NADH as studied by electrospray ionization mass spectrometry and 11B NMR spectroscopy

This paper describes for the first time the direct measurement of boric acid (B(OH)(3)) and borate (B(OH)(4) (-)) adduction to NAD(+) and NADH by electrospray ionization mass spectrometry (ESI-MS) and (11)B NMR spectroscopy. The analysis demonstrates that borate binds to both cis-2,3-ribose diols on NAD(+) forming borate monoesters (1 : 1 addition), borate diesters (1 : 2 addition) and diborate esters (2 : 1 addition), whereas, only borate monoesters were formed with NADH. MS in the negative ion mode showed borate was bound to a cis-2,3-ribose diol and not to the hydroxyl groups on the phosphate backbone of NAD(+), and MS/MS showed that the 1 : 1 addition monoester contained borate bound to the adenosine ribose. Boron shifts of borate monoesters and diesters with NAD(+) were observed at 7.80 and 12.56 ppm at pH 7.0 to 9.0. The esterifications of borate with NAD(+) and NADH were pH dependent with maximum formation occurring under alkaline conditions with significant formation occurring at pH 7.0. Using ESI-MS, the limit of detection was 50 micro M for NAD(+) and boric acid (1 : 1) to detect NAD(+)-borate monoester at pH 7.0. These results suggest esterification of borate with nicotinamide nucleotides could be of biological significance.     

DFT calculations of <Superscript>14</Superscript>N, <Superscript>17</Superscript>O,and <Superscript>2</Superscript>H NQR parameters: Investigation of hydrogen bond interactions in sulfapyridine crystalline structure

DFT calculations of electric field gradient (EFG) tensors at the sites of ¹⁴N, ¹⁷O, and ²H nuclei are carried out to characterize the hydrogen bond (HB) interactions in the sulfapyridine crystal structure. One-molecule (monomer) and hydrogen-bonded hexameric cluster models of sulfapyridine are constructed according to available X-ray coordinates where the proton positions are optimized. Then, EFG tensors are calculated for both monomer and target molecule in the hexameric cluster of sulfapyridine to show the effect of HB interactions on the tensors. The calculated EFG tensors are converted to the experimentally measurable nuclear quadrupole resonance (NQR) parameters: quadrupole coupling constant (C _Q ) and asymmetry parameter (η _Q ). The results reveal different contribution of various nuclei to N-H⋯N and N-H⋯O HB interactions in the cluster where the N2 and O1 have major contributions. The computations are performed with B3LYP and B3PW91 functionals DFT method and 6-311+G* and 6-311++G** standard basis sets using the Gaussian 98 package.     

Differentiating between trivalent lanthanides and actinides

The reactions of LnCl(3) with molten boric acid result in the formation of Ln[B(4)O(6)(OH)(2)Cl] (Ln = La-Nd), Ln(4)[B(18)O(25)(OH)(13)Cl(3)] (Ln = Sm, Eu), or Ln[B(6)O(9)(OH)(3)] (Ln = Y, Eu-Lu). The reactions of AnCl(3) (An = Pu, Am, Cm) with molten boric acid under the same conditions yield Pu[B(4)O(6)(OH)(2)Cl] and Pu(2)[B(13)O(19)(OH)(5)Cl(2)(H(2)O)(3)], Am[B(9)O(13)(OH)(4)]·H(2)O, or Cm(2)[B(14)O(20)(OH)(7)(H(2)O)(2)Cl]. These compounds possess three-dimensional network structures where rare earth borate layers are joined together by BO(3) and/or BO(4) groups. There is a shift from 10-coordinate Ln(3+) and An(3+) cations with capped triangular cupola geometries for the early members of both series to 9-coordinate hula-hoop geometries for the later elements. Cm(3+) is anomalous in that it contains both 9- and 10-coordinate metal ions. Despite these materials being synthesized under identical conditions, the two series do not parallel one another. Electronic structure calculations with multireference, CASSCF, and density functional theory (DFT) methods reveal the An 5f orbitals to be localized and predominately uninvolved in bonding. For the Pu(III) borates, a Pu 6p orbital is observed with delocalized electron density on basal oxygen atoms contrasting the Am(III) and Cm(III) borates, where a basal O 2p orbital delocalizes to the An 6d orbital. The electronic structure of the Ce(III) borate is similar to the Pu(III) complexes in that the Ce 4f orbital is localized and noninteracting, but the Ce 5p orbital shows no interaction with the coordinating ligands. Natural bond orbital and natural population analyses at the DFT level illustrate distinctive larger Pu 5f atomic occupancy relative to Am and Cm 5f, as well as unique involvement and occupancy of the An 6d orbitals.     

Solid-state 93Nb and 13C NMR investigations of half-sandwich niobium(I) and niobium(V) cyclopentadienyl complexes

Solid-state 93Nb and 13C NMR experiments, in combination with theoretical calculations of NMR tensors, and single-crystal and powder X-ray diffraction experiments, are applied for the comprehensive characterization of structure and dynamics in a series of organometallic niobium complexes. Half-sandwich niobium metallocenes of the forms Cp'Nb(I)(CO)4 and CpNb(V)Cl4 are investigated, where Cp = C5H5- and Cp' = C5H4R- with R = COMe, CO2Me, CO2Et, and COCH2Ph. Anisotropic quadrupolar and chemical shielding (CS) parameters are extracted from 93Nb MAS and static NMR spectra for seven different complexes. It is demonstrated that 93Nb NMR parameters are sensitive to changes in temperature and Cp' ring substitution in the Cp'Nb(I)(CO)4 complexes. There are dramatic differences in the 93Nb quadrupolar coupling constants (C(Q)) between the Nb(I) and Nb(V) complexes, with C(Q) between 1.0 and 12.0 MHz for Cp'Nb(CO)4 and C(Q) = 54.5 MHz for CpNbCl4. The quadrupolar Carr-Purcell Meiboom-Gill (QCPMG) pulse sequence is applied to rapidly acquire, in a piecewise fashion, a high signal-to-noise ultra-wide-line 93Nb NMR spectrum of CpNbCl4, which has a breadth of ca. 400 kHz. Solid-state 93Nb and 13C NMR spectra and powder XRD data are used to identify a new metallocene adduct coordinated at the axial position of the metal site by a THF molecule: CpNb(V)Cl4.THF. 13C MAS and CP/MAS NMR experiments are used to assess the purity of samples, as well as for measuring carbon CS tensors and the rare instance of one-bond 93Nb, 13C J-coupling, 1J(93Nb,13C). Theoretically calculated CS and electric field gradient (EFG) tensors are utilized to determine relationships between tensor orientations, the principal components, and molecular structures.     

Syntheses and crystal structures of two new bismuth hydroxyl borates containing [Bi2O2]2+ layers: Bi2O2[B3O5(OH)] and Bi2O2[BO2(OH)

Two new bismuth hydroxyl borates, Bi(2)O(2)[B(3)O(5)(OH)] (I) and Bi(2)O(2)[BO(2)(OH)] (II), have been synthesized under hydrothermal conditions. Their structures were determined by single-crystal and powder X-ray diffraction data, respectively. Compound I crystallizes in the orthorhombic space group Pbca with the lattice constants of a = 6.0268(3) ?, b = 11.3635(6) ?, and c = 19.348(1) ?. Compound II crystallizes in the monoclinic space group Cm with the lattice constants of a = 5.4676(6) ?, b = 14.6643(5) ?, c = 3.9058(1) ?, and β = 135.587(6)°. The borate fundamental building block (FBB) in I is a three-ring unit [B(3)O(6)(OH)](4-), which connects one by one via sharing corners, forming an infinite zigzag chain along the a direction. The borate chains are further linked by hydrogen bonds, showing as a borate layer within the ab plane. The FBB in II is an isolated [BO(2)(OH)](2-) triangle, which links to two neighboring FBBs by strong hydrogen bonds, resulting in a borate chain along the a direction. Both compounds contain [Bi(2)O(2)](2+) layers, and the [Bi(2)O(2)](2+) layers combine with the corresponding borate layers alternatively, forming the whole structures. These two new bismuth borates are the first ones containing [Bi(2)O(2)](2+) layers in borates. The appearance of Bi(2)O(2)[BO(2)(OH)] (II) completes the series of compounds Bi(2)O(2)[BO(2)(OH)], Bi(2)O(2)CO(3), and Bi(2)O(2)[NO(3)(OH)] and the formation of Bi(2)O(2)[B(3)O(5)(OH)] provides another example in demonstrating the polymerization tendency of borate groups.     

2H NMR calculations on polynuclear transition metal complexes: on the influence of local symmetry and other factors

It is now well-known that (2)H solid-state NMR techniques can bring a better understanding of the interaction of deuterium with metal atoms in organometallic mononuclear complexes, clusters or nanoparticles. In that context, we have recently obtained experimental quadrupolar coupling constants and asymmetry parameters characteristic of deuterium atoms involved in various bonding situations in ruthenium clusters, namely D(4)Ru(4)(CO)(12), D(2)Ru(6)(CO)(18) and other related compounds [Gutmann et al., J. Am. Chem. Soc., 2010, 132, 11759], which are model compounds for edge-bridging (μ-H) and face-capping (μ(3)-H) coordination types on ruthenium surfaces. The present work is in line with density functional theory (DFT) calculations of the electric field gradient (EFG) tensors in deuterated organometallic ruthenium complexes. The comparison of quadrupolar coupling constants shows an excellent agreement between calculated and observed values. This confirms that DFT is a method of choice for the analysis of deuterium NMR spectra. Such calculations are achieved on a large number of ruthenium clusters in order to obtain quadrupolar coupling constants characteristic of a given coordination type: terminal-D, η(2)-D(2), μ-D, μ(3)-D as well as μ(4)-D and μ(6)-D (i.e. interstitial deuterides). Given the dependence of such NMR parameters mainly on local symmetry, these results are expected to remain valid for large assemblies of ruthenium atoms, such as organometallic ruthenium nanoparticles.     

Effects of large halides on the structures of lanthanide(III) and plutonium(III) borates

Reactions of LnBr(3) or LnOI with molten boric acid result in formation of Ln[B(5)O(8)(OH)(H(2)O)(2)Br] (Ln = La-Pr), Nd(4)[B(18)O(25)(OH)(13)Br(3)], or Ln[B(5)O(8)(OH)(H(2)O)(2)I] (Ln = La-Nd). Reaction of PuOI with molten boric acid yields Pu[B(7)O(11)(OH)(H(2)O)(2)I]. The Ln(III) and Pu(III) centers in these compounds are found as nine-coordinate hula-hoop or 10-coordinate capped triangular cupola geometries where there are six approximately coplanar oxygen donors provided by triangular holes in the polyborate sheets. The borate sheets are connected into three-dimensional networks by additional BO(3) triangles and/or BO(4) tetrahedra that are roughly perpendicular to the layers. The room-temperature absorption spectrum of single crystals of Pu[B(7)O(11)(OH)(H(2)O)(2)I] shows characteristic f-f transitions for Pu(III) that are essentially indistinguishable from Pu(III) in other compounds with alternative ligands and different coordination environments.     

Dioxaborirane: a highly reactive peroxide that is the likely intermediate in borate catalysed electrophilic reactions of hydrogen peroxide in alkaline aqueous solution

This paper reports on a kinetic and theoretical study into the borate mediated reaction of dimethyl sulfide with hydrogen peroxide in both acid and alkaline conditions. At high pH, whilst the kinetic data is consistent with the catalytic species being monoperoxoborate, formed from the rapid equilibrium between hydrogen peroxide and boric acid, DFT calculations show that this species is in fact less reactive than hydrogen peroxide, requiring us to seek an alternative catalytic mechanism. DFT provides an important insight for this, showing that although boric acid and peroxoboric acid are primarily Lewis acids, they can exhibit a small degree of Br?nsted acidity, allowing, respectively, the B(O)(OH)(2)(-) and HOOB(OH)(O)(-) anions to exist in small concentrations. Whilst the peroxoborate anion, HOOB(OH)(O)(-), is predicted to have only marginal catalytic activity, its tautomer, dioxaborirane, (HO)(2)BO(2)(-), a three membered cyclic peroxide, has a very low activation barrier of 2.8 kcal/mol. Hence, even though dioxaborirane is likely to be present in very low concentrations, it is still sufficiently reactive for overall rate enhancements to be observed for this system. This is the first literature report of this species. The observed low selectivity observed for borate catalysed reactions of hydrogen peroxide with a range of substituted phenyl methyl sulfides in our previous study (D. M. Davies, M. E. Deary, K. Quill and R. A. Smith, Chem.-Eur. J. 2005, 11, 3552-3558) is further evidence in favour of a highly reactive catalytic species. At low pH, kinetic data shows that borate catalyses the reaction between hydrogen peroxide and dimethyl sulfide; this is supported by DFT calculations that predict peroxoboric acid to be an effective catalytic intermediate, with an energy barrier of 7.4 kcal mol(-1) compared to 10.1 kcal mol(-1) for the uncatalysed system. Nevertheless, the overall contribution of this pathway is small because of the unfavourable equilibrium between hydrogen peroxide and boric acid to form peroxoboric acid.