Ion-pair extractions by the use of planar and non-planar extracting solvents

The effect of extracting solvent was studied on the ion-pair extraction reactions with a special interest in the effect of molecular shape (planar or non-planar) of the solvent. The following two reactions were investigated: (HNN)_o + (Q⁺)_W (Q·NN)_o + (H⁺)_W (Extraction I); (Q-ClO₄)_o + (Pi^–)_w (Q·Pi)_o + (ClO ₄ ^– )_w (Extraction II), where HNN, NN^–, Pi^–, and Q⁺ represent 1-nitro-2-naphthol, its base form (1-nitro-2-naphtholate), picrate, and a cationic species, respectively. Above extraction equilibria were confirmed to hold in cases of various extracting solvents including planar solvents (1-chloronaphthalene, etc.) and non-planar solvents (1,2-dichloroethane, chloroform). An approximately linear relationship was found to exist between the extraction constants of Extraction I (logK _ex ^I ) and the Kosower's Z-value of extracting solvents. It was also found that the compatibility between the molecular shape of the ion-pair complexes and that of the extracting solvents affected the extractability to a considerable extent.     

Der Einfluß großer Salzkonzentrationen auf die Oxydationsreaktion von Fe(phen) 3 2+ mit Ce(IV) in Schwefelsäure

The influence of NaClO₄, NaCl and Na₂SO₄ on the oxidation of Fe(phen) ₃ ²⁺ by Ce(IV) was investigated by means of the stopped-flow method. At the concentrations range of NaClO₄ and NaCl 0.1–1.0M the rate constant values decrease from 1.03·10⁵ to 0.56·10⁵M^–1s^–1 and from 1.08·10⁵ to 0.81·10⁵M^–1s^–1 respectively.In varying concentrations of Na₂SO₄ solutions (0.05–0.35M) the rate constant values decrease from 1.05·10⁵M^–1s^–1 to 0.45·10⁵M^–1s^–1.Taking into account the negative salt effect the mechanism of the reaction progress is proposed.

     

Acidity function scale for H2SO4 solutions in phenol-acetone solvents with low water content at 25°C

The indicator method was employed to measure the acidity function H ₀ ^S of H₂SO₄ solutions in solvents consisting of an equimolar mixture of phenol and acetone with 0.8% water (from 3.6·10^–4 to 2.6·10^–2 M H₂SO₄) and 2.5% water (from 4.3·10^–4 to 0.32 M H₂SO₄) and of phenol and acetone in a molar ratio of 1:1.5 with 0.67% water (from 1.63·10^–4 to 7.77·10^–2 M H₂SO₄) and 2.09% water (from 4.49·10^–4 to 0.35 M H₂SO₄) at 25°C. The indicators employed were 4- and 2-nitroaniline.Deceased.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Lenneftekhim Scientific-Commercial Association, St. Petersburg. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 72–78, January, 1992.     

On the characteristics and mechanism of the radiation-induced chain reaction between sulfur dioxide and molecular oxygen in acid solutions

Characteristics of the -induced chain reaction between sulfur dioxide and molecular oxygen in perchloric and sulfuric acid media in the presence of Ce(III) ions have been studied. The concentration effects of dissolved oxygen (0.2·10^–3–9.4·10^–3 mol/dm³, sulfur dioxide (0.3·10^–1–2.0·10^–1 mol/dm³ and Ce(III) (0.2·10^–3–4.8·10^–3 mol/dm³) and dose rate (0.26·10¹⁹–1.0·10¹⁹ eV/dm³·s) on the radiation — chemical yield of oxygen consumption G(–O₂) and accumulation of sulfate G(HSO ₄ ^– ), have been investigated. The reaction proceeds with G(–O₂) reaching 10²–10³ molecule/100eV in a catalytic regime. The reaction rate in perchloric acid medium is 3–4 times lower than that in the sulfuric acid medium and depends on the SO₂, O₂ and Ce(III) concentrations, the reaction order varying from 1.0 to 0 and/or in the reverse direction. The mechanism of the process involves chain propagation with 3 stages and 3 intermediates: SO₃H, HSO₅ and Ce(IV). The catalytic effect is caused by the interaction of HSO₄ with Ce(IV) ions followed by their reduction when interacting with SO₂, yielding SO₃H radicals. Chain termination may be due to one or two of the three intermediates or due to all three particles, the kinetics depending on this. Kinetic equations describing the experimental data have been obtained.     

Complexation reactions of cerium(III and IV) with 9-phenyl-2,3,7- trihydroxy-6-fluorone in the presence of cationic surfactants

The complexation reactions of cerium(III and IV) with 9-phenyl-2,3,7-trihydroxy-6-fluorone (H₃ PF) have been studied in the presence and absence of some surfactants and protective colloids. Maximum enhancement of the chelate absorbances is obtained with the cationic surfactant cetylpyridinium bromide (CPB) or cetyltrimethylammonium bromide (CTAB). In thepH ranges 8.2–9.0 and 9.8–10.8 the ternary 1:3:3 and 1:4:3 cerium(III)-PF-CPB complexes are formed with molar absorptivities of 9.02 × 10⁴ and 9.86 · 10⁴ lmol^–1 cm^–1 at 570 and 590 nm, respectively. The corresponding 1:4:2 and 1:3:2 complexes of cerium(IV) are formed in thepH ranges 8.4–9.0 and 9.8–10.6 in the presence ofCTAB andCPB, respectively. Their molar absorptivities are 8.00·10⁴ and 8.56·10⁴lmol^–1 cm^–1 at 570 and 590 nm, respectively. The stability constants of the studied complexes have been determined and a spectrophotometric method has been developed to determine the cerium content in monazite concentrate.

---

Komplexierungsreaktionen von Cer(III und IV) mit 9-Phenyl-2,3,7-trihydroxy-6-fluoron in Gegenwart kationischer oberflächenaktiver Stoffe

Zusammenfassung Es wurden Komplexierungsreaktionen von Cer(III und IV) mit 9-Phenyl-2,3,7-trihydroxy-6-fluoron (H₃ PF) in Gegenwart und auch ohne oberflächenaktive Stoffe und Schutzkolloide untersucht. Maximale Verstärkung der UV-VIS-Absorption wurde mit den kationischen oberflächenaktiven Verbindungen Cetylpyridiniumbromid (CPB) und Cetyltrimethylammoniumbromid (CTAB) erreicht. ImpH-Bereich von 8.2–9.0 und 9.8–10.8 bildeten sich die ternären 1:3:3 und 1:4:3 Cer(III)-PF-CPB-Komplexe mit molaren Extinktionskoeffizienten von 9.02·10⁴, bzw. 9.86·10⁴lmol^–1 cm^–1 bei 570 bzw. 590 nm. Die entsprechenden 1:4:2 und 1:3:2 Cer(IV)-Komplexe wurden impH-Bereich 8.4–9.0 und 9.8–10.6 in Gegenwart vonCTAB undCPB gebildet, wobei die Extinktionskoeffizienten bei 8.00·10⁴, bzw. 8.56·10⁴ lmol^–1 cm^–1 bei 570 bzw. 590 nm lagen. Es wurden die Stabilitätskonstanten der Komplexe bestimmt und es wurde eine spektrophotometrische Methode zur Bestimmung von Cer in Monazitkonzentrat entwickelt.

     

Photometrisch-potentiometrische Bestimmung der Hydrolysenkonstanten vonN-Bromverbindungen

The equilibrium concentrations of all reaction products emerging from the hydrolysis ofN-bromo compounds in the presence of bromide and thereby also the hydrolysis constants (K ₁) have been calculated from the absorbance at 392.8 nm, thepH-value and the initial concentrations of theN-bromo compound and the bromide. The following compounds have been investigated:N-bromo-succinimide:K ₁=2.2·10^–6, 1,3-dibromo-5,5-dimethylhydantoin:K ₁=1.7·10^–5,N-bromoacetamide:K ₁=1.8·10^–6,N-bromo-monochloroacetamide: 5.2·10^–6,N-bromo-dichloroacetamide:K ₁=8.9·10^–6 andN-bromo-trichloroacetamide:K ₁=1.8·10^–5. The precision of the method, which is mainly suited for weak hydrolizingN-bromocompounds (K ₁<10^–4) are discussed and the overall error of the calculated values was found to be in the range of ±5–12%. The reactivities in aqueous solution of the most frequently usedN-bromo compounds are compared by means of the calculated HOBr equilibrium concentrations. The differences to be expected on the basis of the latters are at concentrations >10^–5 mol/l rather great, while they can be neglected in very dilute solutions (-10^–6 mol/l).

     

Enhancement of phenols on ion-pair extraction of chromium(VI) with tetraphenylarsonium

The effect of phenols on the ion-pair extraction of chromium(VI) as chromate anion (HCrO ₄ ^– ) with tetraphenylarsonium cation (TPA⁺) has been investigated. By using TPACl, chromate is extracted as an ion-pair, TPA⁺·HCrO ₄ ^– , into organic solvents, but its extractability into nonpolar solvents such as carbon tetrachloride is very low. The addition of several phenols greatly enhances the extractability, e.g., the distribution ratio of chromium(VI) between carbon tetrachloride and water rises 5500-fold in the presence of 0.020M 3,5-dichlorophenol in the organic phase. The enhancement was larger when using more acidic phenols and less polar solvents. From the analysis of the extraction data for the 3,5-dichlorophenol-carbon tetrachloride system, it was shown that one molecule of chromate is extracted together with one TPA⁺ and 1–3 phenol molecules and the extraction constants were determined. The UV spectrum indicated the extracted species including chromate ester to the TPA⁺·ArOCrO ₃ ^– ·mArOH (m=1,2).     

Beiträge zur Neutronenaktivierungsanalyse von luminophorreinen Zinkverbindungen

Zusammenfassung Nach dem Vergleichsverfahren mit chemischer Aufarbeitung der Proben wurden in luminophorreinen Zinkverbindungen Co, Fe und Mn durch Neutronenaktivierungsanalyse bestimmt. Die Trennung wurde mittels Anionenaustauschchromatographie an Dowex 1 (Cl^–) bzw. Wof. SBW (Cl^–) durchgeführt. Die Empfindlichkeit des Verfahrens beträgt bei einem Neutronenfluß von 10¹³ n/sek. cm² 10^–8% Mn, 5 · 10^–7% Co und 5 · 10^–6% Fe. Die Standardabweichung der Einzelwerte liegt bei ±5%.

---

Summary The comparison procedure with chemical processing of the samples was employed to determine Co, Fe and Mn in zinc compounds free of luminophors by means of neutron activation methods. The separation was made by anion exchange chromatography on Dowex 1 (Cl^–) or Wof. SBW (Cl^–). The sensitivity of the method, at a neutron flow of 10¹² n/sec.cm², is 10^–8% Mn, 5 · 10^–7% Co, and 5 · 10^–6% Fe. The standard deviation of the individual results is about ±5%.

---

Résumé Suivant le procédé par comparaison avec traitement chimique des échantillons, on a dosé par analyse par activation neutronique le cobalt, le fer et le manganèse dans les composés du zinc non lumenophores. On effectue la séparation par chromatographie avec échange anionique sur Dowex 1 (Cl^–) ou Wof. SBW (Cl^–). La sensibilité du procédé s'élève dans le cas d'un flux de neutrons de 10¹² n/sec.cm², à 10^–8% Mn, 5 · 10^–6% Co et 5 · 10^–% Fe. La déviation standard pour une mesure isolée s'élève à ±5%.

---

---

Die Verfasser danken Herrn Prof. Dr.C. F. Weiss für sein Interesse an dieser Arbeit.     

Extrahierte Verbindungen von Gallium, Indium und Thallium in Verteilungssystemen mit Tributylphosphat, Cyclohexanon und Isobutylmethylketon

Zusammenfassung Das Verteilungsverhalten der Halogenide und Halogenometallate von Gallium, Indium und Thallium mit den drei Solventien (S) Tributylphosphat (TBP), Cyclohexanon (Cyclo) und Isobutylmethylketon (IBMK) wurde untersucht. Die extrahierten Verbindungen wurden nach der Geradenmethode nach Asmus, der logarithmischen Methode nach McKay, der Methode der kontinuierlichen Variation, durch Analyse der beiden Phasen und durch konduktometrische Extraktionstitration nachgewiesen. Identifiziert wurden folgende Verbindungen: [GaCl₄]^–·2 S, Ga-(SCN) ₃·3 TBP, [Ga(SCN)₄]^–·2 TBP, [InCl₄]^–·2 TBP, [InBr₄]^–·2TBP, [InBr₄]·x Cyclo, [InBr₄]^–·x IBMK, [InJ₄]^–·2 S, In(SCN)₃·3 TBP, [In(SCN)₄]^–·2 TBP, TlCl₃·1 TBP, [TlCl₄]^–·2 S, TlBr₃·1 TBP, [Tl-Br₄] ^–·2 S, TlJ₃·x TBP und [TlJ₄]^–·xS. Wegen der nicht eindeutig definierten Oxydationsstufe von Thalliumjodiden ergaben sich bei den Versuchen experimentelle Schwierigkeiten. Daher wurde in diesem System zusätzlich das radioaktive Isotop ²⁰⁴Thallium verwendet.

---

Extracted compounds of gallium, indium and thallium in distribution systems with tributyl phosphate, cyclohexanone and isobutylmethylketone

The behaviour of distribution of the halides and halogenometallates of gallium, indium and thallium with the three solvents (S) tributylphosphate (TBP), cyclohexanone (Cyclo) and isobutylmethylketone (IBMK) are investigated. The extracted compounds are detected with the straight-line method of Asmus, the logarithmic method of McKay, the method of continuous variation, by analysis of the two phases, and with the conductometric extraction-titration. The following compounds were identified: [GaCl₄]^–·2S, Ga(SCN)₃·3TBP, [Ga(SCN)₄]^–·2TBP, [InCl₄]^–·2TBP, [InBr₄]^–·2TBP, [InBr₄]·x Cyclo, [InBr₄]^–·x IBMK, [InJ₄]^– ·2S, In(SCN)₃·3TBP, [In(SCN)₄]^–·2TBP, TlCl₃·1TBP, [TlCl₄]^–·2S, TlBr₃ ·1TBP, [TlBr₄]^–·2S, TlJ₃·x TBP and [TlJ₄]^–·x S. The not unequivocally defined stage of oxidation of thallium iodides resulted in experimental difficulties. Thus, in this system the radioactive isotope ²⁰⁴thallium was additionally used.

---

---

Herrn Professor Dr. E. Asmus zum 60. Geburtstag gewidmet.

---

Wie danken Herrn Priv.-Doz. Dr. H. Nickel für die freundliche Unterstützung bei den in der KFA Jülich durchgeführten radioaktiven Messungen.     

Transition state geometry in radical abstraction reactions: comparison of interatomic distances in the intersecting parabolas and Morse curves models with quantum-chemical calculations

Interatomic distances in the transition state were estimated for the reactions of radical abstraction: H^· + H₂, H^· + HCl, H^· + CH₄, N^·H₂ + NH₃, HO^· + H₂O, HO₂ ^· + HOOH, and C^·H₃ + SiH₄. The calculation was performed by the quantum-chemical density functional method or coupled clusters method (QCH), as well as by the methods of intersecting parabolas (IPM) and Morse curves (IMM), using experimental data (activation energies and reaction enthalpies). The results of the latter two methods are close to the quantum-chemical calculation and differ only by the increment a: r(IPM or IMM) = a + r(QCH), where a = –4.5·10^–12 m for IPM and a = +1.9·10^–12 m for IMM.     

Transport of titanium(IV) ions across di-2-ethylhexylphosphoric acid-CCl4 supported liquid membranes

Transport study for Ti(IV) ions using di-2-ethylhexylphosphoric acid (D2EHPA) (carrier)-CCl₄ (diluent) liquid supported membrane in microporous polypropylene hydrophobic film has been performed. The parameters studied are effects of carrier, H₂SO₄, stripping agent (NH₄F) concentrations and temperature variation on flux and permeability coefficients of the metal ion. The optimum concentrations of transport found are 2.04 mol·dm^–3 D2EHPA, 1.0 mol·dm^–3 H₂SO₄ in the feed and 1 mol·dm^–3 NH₄F as stripping agent. The maximum flux and permeability coefficient determined are 1.32·10^–5 mol·m^–2·s^–1 and 8.02·10^–12 mol·m^–2·s^–1, respectively. The transport of this metal ion is increased with increase in temperature. The mechanism of transport appears to be based on coupled counter ion transport phenomenon.     

New heterometallic coordination polymers derived form chalcogenocyanates: synthesis,characterization and electrical properties

A series of conducting mixed-metallic coordination polymers: Cu₂Pb(SCN)₄, CuPb(SeCN)₄, Cu^II _0.50Cu^IPb (SCN·SeCN)₂, CuAg(SCN)₂, CuAg(SeCN)₂ and CuAg(SCN·SeCN) have been synthesized by the reaction of Cu and Pb^II or Ag^Initrates with KSCN or KSeCN, or both KSCN and KSeCN in H₂O. Of significance are the aerobic reactions which yield heterometallic complexes viaoxidation of SCN^– and SeCN^– into (SCN)₂ and (SeCN)₂ followed by quantitative reduction of Cu^II into Cu^I; in the case of CuPb(SeCN)₄ reduction of Cu^II into Cu^I is not observed, while in Cu^{II 0.50}Cu^IPb(SCN·SeCN)₂, Cu^II is partially reduced to Cu^I. These compounds have been characterized by elemental (C, N, S and Se) analyses, magnetic moment measurements, relevant spectroscopies (i.r., far i.r., Raman, u.v.–vis. and e.p.r.), powder X-ray diffraction pattern and conductivity technique. The v(CN) vibrations in 2162–2087cm^–1 and far i.r. bands (500–100cm^–1) corroborated by Raman bands are conclusive of the bridging (N, S/Se) mode and metal-NCS and metal-SCN/SeCN^– bonding respectively in the complexes. Room temperature magnetic moment, electronic absorption spectra and e.p.r. active/silent nature confirm the oxidation state of copper in these solids. Room temperature compressed pellet conductivities _rt, 10^–9to 10^–7Scm^–1 with activation energies, E _a=0.19–0.25eV and increase in the conductivity with increase in temperature in the 305–423K, range and decrease in conductivity with decrease in temperature in the 295–200K range, show their semiconductor properties.     

Modeling of iron adsorption on HTTA-loaded polyurethane foam using Freundlich,Langmuir and D-R isotherm expressions

The sorption of Fe(III) at low pH range from 1 to 4.5 on open cell polyether type HTTA-loaded polyurethane foam has been carried out using batch technique. The optimum shaking time for 2.5· 10^–4M solution of Fe(III) was found to be 30 minutes. The concept of macropore and micropore nature of polyurethane foam sorbent offers unique advantages of adsorption. Freundlich and Langmuir adsorption isotherms are followed at low concentration range from 1·10^–4 to 3·10^–4M solution of Fe(III). The Freundlich constant (1/n=0.46±0.013 andK=9.16±1.39 mg·g^–1) and Langmuir isotherm constants(M=21.78 mg·g^–1 andb=88.41±9.731·g^–1) were established. The sorption mean free energyE=12.22±0.09 kJ·mol^–1 and loading capacityC _m =145.21±6.1 mg·g^–1 were evaluated using Dubinin-Radushkevich isotherm, which suggested that the adsorption mechanism was chemisorption.     

Thermal decomposition of lanthanide(III) and Y(III) 3,4,5-trihydroxybenzoates: Preparation, properties

Complexes of lanthanides(III) (La-Lu) and Y(III) with 3,4,5-trihydroxybenzoic acid (gallic acid) were obtained and their thermal decomposition, IR spectra and solubility in water have been investigated. When heated, the complexes with a general formula Ln(C₇H₅O₅)(C₇H₄O₅)·nH₂O (n=2 for La-Ho and Y: n=0 for Er-Lu) lose their crystallization water and decompose to the oxides Ln₂O₃, CeO₂, Pr₆O₁₁, and Tb₄O₇, except of lanthanum and neodymium complexes, which additionally form stable oxocarbonates such as Ln₂O₂CO₃. The complexes are sparingly soluble in water (0.3·10^–5–8.3·10^–4 mol dm^–3).This revised version was published online in November 2005 with corrections to the Cover Date.     

Zum Selbstdiffusionskoeffizienten des Wassers im Polymer (Feststoff)-Wasser-System

Zusammenfassung Wählt man zur Beschreibung einfacher färberischer Systeme die Thermodynamik der irreversiblen Prozesse, so erhält man Gleichungen für den Diffusionsprozeß. Man hat es in diesem vereinfachten Modell mit drei unabhängigen Diffusionskoeffizienten zu tun, wobei einer davon den SelbstdiffusionskoeffizientenD von Wasser im Substrat beschreibt. Durch experimentelle Untersuchungen mittels Tracer-Technik wurdeD bei verschiedenen Polymeren in der Größenordnung von 4 · 10^–10 cm² · sec^–1 bestimmt. Dieser Befund wird durch eine parakristalline Wasserstruktur im Polymer interpretiert. Die scheinbaren AktivierungsenergienE _a für diesen Diffusionsprozeß liegen mit ca. 6 kcal · Mol^–1 etwas höher als im Wasser (4,2 kcal · Mol^–1) und sprechen dafür, daß wegen der Kleinheit des diffundierenden Teilchens die Bewegung der Kettensegmente des Polymers nicht inE _a enthalten ist.

---

Summary If the thermodynamics of irreversible processes is used to describe simple dyeing systems, equations for the diffusion process are obtained. This simplified model contunius three independent diffusion coefficients, one. of them describing the self-diffusion coefficientD of water in the substrate. By means of experimental investigations using tracer technics for diverse polymersD was found to be about 4 · 10^–10 cm² · sec 1. This result is interpreted by means of a paracrystalline structure of the water in the polymer. The apparent activation energiesE _a of this diffusion process, being about 6 kcal · Mol^–1, are a little greater than in water (4,2 kcal · Mol^–1), indicating that the movement of the chain-segments of the polymer is not contained inE _a , because of the smallness of the diffusing particles.

---

---

Mit 3 Abbildungen und 1 Tabelle     

Kinetic and EPR studies on radical polymerization. Radical polymerization of di-2[2-(2-methoxyethoxy)ethoxy]ethyl itaconate

The polymerization of di-2[2-(2-methoxyethoxy)ethoxy]ethyl itaconate (1) with dimethyl 2,2-azobisisobutyrate (2) was studied, in benzene, kinetically and spectroscopically with the electron paramagnetic resonance (EPR) method. The polymerization rate (R _p) at 50°C is given by the equation:R _p=k[2]^0.48 [1]^2.4. The overall activation energy of polymerization was calculated to be 34 kJ·mol^–1. From an EPR study, the polymerization system was found to involve EPR-observable propagating polymer radicals of 1 under the actual polymerization conditions. Using the polymer radical concentration, the rate constants of propagation (k _p) and termination (k _t) were determined. With increasing monomer concentration,k _p(1.54.3 L·mol^–1·s^–1 at 50°C) increases andk _t (1.0·10⁴4.2·10⁴ L·mol^–1·s^–1 at 50°C) decreases, which seems responsible for the high dependence ofR _p on the monomer concentration. The activation energies of propagation and termination were calculated to be 11 kJ·mol^–1 and 84 kJ·mol^–1, respectively. For the copolymerization of 1(M ₁) and styrene (M ₂) at 50°C in benzene the following copolymerization parameters were found:r ₁=0.2,r ₂=0.53, Q₁=0.57, ande ₁=+0.7.     

Sulfito- und Thiosulfato-Komplexe des Kobalts(III) mitα-Benzildioxim Überα-Dioximinkomplexe der Übergangsmetalle, 52. Mitt.

Some new ligand exchange reactions of [Co(diph·H)₂Cl(H₂O)] and [Co(diph·H)₂(SO₃)(H₂O)]^– complexes with N₃ ^–, S₂O₃ ^2– and with aromatic and heterocyclic amines were carried out. A series of derivatives of the types [Co(diph·H)₂(SO₃)X] ^n– (X=N₃ ^–, S₂O₃ ^2– oramine) and [Co(diph·H)₂(S₂O₃)₂]^3– were described and characterized. Some structural problems are resolved and discussed on the basis of UV and IR spectral data.     

Copper(II) Cyanoacetate Polymer: Synthesis and Structure

A new copper carboxylate polymer with cyanoacetate anion as a ligand was synthesized and studied using X-ray diffraction, IR, and EPR spectroscopy. The crystal is tetragonal: a= 14.702(2) Å, c= 13.470(3) Å, Z= 8, space group I4₁/a, and R= 0.0634. The copper atoms in the centrosymmetric dimeric fragment have a square-pyramidal surrounding with the CuO₄N coordination core and are joined through four bidentate bridging anions of cyanoacetic acid Cu(1)"–O(1A) 1.931(4) Å, Cu(1)"–O(1B) 1.926(4) Å, Cu(1)–O(2B) 2.018(3) Å, Cu(1)–O(2A) 2.036(4) Å, and Cu(1)–N(1A)" 2.206(5) Å). The Cu···Cu" distance in the dimer is 2.709 Å. The copper atom is extended from the mean equatorial plane toward the axial nitrogen atom by 0.23 Å. EPR data confirm strong antiferromagnetic interaction (2J –275 cm^–1) between the copper(II) ions of the dimeric fragment, whereas the interaction between the dimers is significantly weaker (J< 0.3 cm^–1).     

Electromigration of carrier-free radionuclides

Dependences of La(III) overall ion mobilities on concentrations of ox^2– and tart^2– anions of oxalic and tartaric acid in aqueous solutions of 0.01 overall ionic strength and temperature 298.1 K were obtained by direct measurements of electromigration of carrierfree¹⁴⁰La-lanthanum(III). Concentration stability constants K_n and individual ion mobilities u _i ^o of oxalate and tartrate complexes of La(III) have been calculated for nitrate and perchlorate electrolytes, respectively: [La(ox)]⁺, lg K₁=5.63(9), u⁰[La(ox)]⁺=1.95(15)·10^–4 cm²·s^–1·V^–1; [la(ox)₂]^–, lg K₂=4.05(19) u⁰[La(ox)₂]^–=–1.76(20)·10^–4 cm²·s^–1·V^–1; [La(tart)]⁺, lg K₁=4.40(5), u⁰[La(tart)]⁺=+1.99(18)·10^–4 cm²·s^–1·V^–1.Results are compared with literature data. Additional, limiting individual La³⁺ ion mobility was calculated: =+6.9(1)·10^–4 cm²·s^–1·V^–1 for pure water at 298.1 K.     

Spectroscopic and thermal studies on the decomposition of l,3,5-triamino-2,4,6-trinitrobenzene (TATB)

The kinetics of the thermal decomposition of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) in condensed state has been investigated by high temperature infrared spectroscopy (IR) and thermogravimetry (TG) in conjunction with pyrolysis gas analysis, differential thermal analysis (DTA) and hot stage microscopy. The decomposition proceeds in two main stages under isothermal conditions and the initial stage involving about 24% loss in weight obeys Avrami-Erofe'ev equation (n= 1), and is governed by an activation energy (E) of 150.58 kJ·mol^–1 and log(A in s^–1) 12.06. The second stage corresponding to 24 to 90% loss in weight gave best fit for Avrami-Erofe'ev equation,n=2, withE=239.56 kJ·mol^–1 and log(A in s^–1) 19.88 by isothermal TG. The effect of additives, on the initial thermolysis of TATB has also been studied. Evolved gas analysis by IR showed that NH₃, CO₂, NO₂, HCN and H₂O are produced in the initial stage of decomposition. The decomposition in KBr matrix in the temperature range 272 to 311.5°C shows relative preferential loss in the -NH₂ to -NO₂ band intensity which indicates that the rupture of C-NH₂ bond, weakened also by the interaction of the NH₂ with the neighbouring NO₂ group, appears to be the primary step in the thermolysis of TATB.