Photochemical synthesis and structural characterization of (η-C5Me5)3Mo3(CO)4(μ2-H)(μ3-O): an unprecedented 46-electron trimolybdenum cluster containing a localized monoprotonated Mo---Mo double bond

Irradiation of the 30-electron Mo₂(η⁵-C₅Me₅)₂(CO)₄ and Re₂(CO)₁₀ in toluene solution (containing H₂O) afforded (in 1–2% yields) a novel triangular metal cluster, (η⁵-C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) (1), which was characterized by a single-crystal X-ray diffraction study. Compound 1, of pseudo C_s-m symmetry, has a triangulo-Mo₃(η₃-O) core with composite Mo---H---Mo and Mo---Mo electron-pair bonds along one unusually short edge (2.660(1) Å) and Mo--- electron-pair bonds along the other two edges (2.916(1) and 2.917(1) Å). The edge-bridged hydride ligand, which displays a characteristic high-field proton NMR resonance at δ −17.79 ppm, was not found from the crystallographic determination but was located via a quantitative potential-energy-minimization method. This procedure unambiguously established that the optimized hydrogen position, which corresponds to a distinct coordination site with identical Mo---H distances of 1.85 Å, is the only one that can be sterically occupied by a metal-bound hydride ligand. This 46-electron species is the first electron-deficient trimolybdenum cluster containing a monoprotonated Mo---Mo double bond; its existence is attributed to ligand overcrowding due to the bulky pentamethylcyclopentadienyl rings. Black (η⁵- C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) · 1/2THF crystallizes with two formula species in a triclinic unit cell of P1 symmetry with a 8.603(4), b 11.115(4), c 19.412(11) Å, 80.69(4)°, β 101.10(4)°, and γ 98.88(3)° at −40° C. Least-squares refinement (RAELS with 221 variables) of one independent Mo₃ molecule and a centrosymmetrically-disordered THF molecule converged at R₁(F) 5.62%, R₂(F 6.88% for 8460 independent diffractometry data (I₀ ρ 3σ(I₀ collected at −40° C with Mo-K radiation     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

The insertion of acetylene into the formal ruthenium-phosphorus bonds of closo-[Ru4(μ4-PPh)2(μ2-CO)(CO)10. Crystal structure of [Ru4(μ4-PPh){μ4-η-P(Ph)CHCH}(μ2-CO)(CO)10]

Treatment of closo-[Ru₄(μ₄-PPh)₂(μ₂-CO)(CO)₁₀] with acetylene under ambient conditions leads to the insertion of the acetylene into the skeletal framework of the cluster and the formation of [Ru₄(μ₄-PPh){μ₄-η³-P(Ph)CHCH}(μ₂-CO)(CO)₁₀], the structure of which has been determined X-ray crystallographically.     

Synthesis of [(μ-RS)(μ-S){Fe2(CO)6}2(μ4-S)] and their reactivity toward electrophiles

Reaction of the Et₃NH⁺ salts of the [(μ-RS)(μ-CO)Fe₂(CO)₆]⁻ anions (R=Bu^t, Ph or PhCH₂) with (μ-S₂)Fe₂(CO)₆ gives reactive intermediates [(μ-RS)(μ-S){Fe₂(CO)₆}₂(μ₄-S)]⁻. Reactions of the latter with alkyl halides, acid chlorides and Cp(CO)₂FeI have been studied. X-Ray structure of (μ-Bu^tS)(μ-PhCH₂S)[Fe₂(CO)₆]₂(μ₄-S) was determined.     

A platina-allenyl ligand coordinated to a triosmium cluster: X-ray structure of the acetylide complex Os3Pt(μ-H)(μ4-η-CCPh)(CO)10(PCy3)

The spiked triangular triosmium-platinum cluster complex Os₃Pt(μ-H)(μ₄-η²-CCPh)(CO)₁₀(PCy₃) has been synthesised by treatment of the unsaturated Os₃Pt(μ-H)₂(CO)₁₀(PCy₃) with LiCCPh followed by protonation. Crystallographic analysis reveals an unusual twisted configuration of the μ₄-η²-CCPh ligand about the triosmium framework such that the complex may be regarded as a platina-allenyl moiety coordinated to an Os₃(μ-H)(CO)₉ unit.     

Synthesis and derivative chemistry of [Ru2(μ-PPh2) (μ-OH) 2(μ-p-cymene) 2]

The cationic diphenylphosphido-bridged compound [Ru₂(μ-PPh₂)(μ-OH)₂(η⁶-p-cymene)₂][PF₆) (2) has been prepared by reaction of the tri-μ-hydroxo complex [Ru₂(μ-OH)₃(η-p-cymene)₂][PF₆] (1) with diphenylphosphine. Complex 2 eliminates water on reaction with protic acids, incorporating the conjugate base of the added acid as a bridging ligand. Formic acid, acetic acid, phenol, and aniline react with 2 to give the monosubstituted compounds [Ru₂(μ-PPh₂)(μ-OH)(μ-L)(η⁶-p-cymene)₂]PF₆] (L = HCO₂, MeCO₂, OPh, or NHPH), whereas methanol, thiophenol, 1,2-benzenedithiol, hydrochloric acid and isopropanol afford the disubstituted derivatives [Ru₂(μ-PPh₂)(μ-L)₂(η⁶-p-cymene)₂]PF₆] (L = OMe, SPh, S₂C₆H₄, Cl, or H).     

Fragmentation of μ4-oxohexa-μ-nitratotetraberyllium, Be4O(NO)3)6, under electron impact

The behaviour of Be₄O(NO₃)₆ under electron impact is similar to that of its carboxylato analogues, Be₄O(RCO₂)₆ where R is H, alkyl or halogenated alkyl. In all these systems, the dissociation of the molecular ions is dominated by steric interactions. The major fragmentations involve the elimination of N₂O₅ or (RCO)₂O and Be(NO₃)₂ or Be(RCO₂)₂ from the ions [M-NO₃]⁺ or [M-RCO₂]⁺. The results obtained confirm the structural similarity of the nitrato complex to tetra-nuclear beryllium oxocarboxylates.     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.     

Synthesis and molecular structure of Ba5(μ5-OH)[μ3-OCH(CF3)2]4[μ2-OCH(CF3)2]4 [OCH(CF3)2](THF)4(H2O)·THF: a source of barium fluoride

The reaction between metallic barium and fluoroisopropanol or alcoholysis of [Ba(OPrⁱ)₂] produces a pentanuclear fluoroalkoxide. Its X-ray structure determination showed its formulation to correspond to Ba₅(μ₅-OH)[μ₃-OCH(CF₃)₂]₄[μ₂-OCH(CF₃)₂]₄ [OCH(CF₃)₂](THF)₄(H₂O)·THF. The metallic core is based on a square pyramid encapsulating an hydroxo ligand. In addition to the barium---alkoxide bonds [2.53(3)–2.86(3) Å] neutral O-donors, four THF [2.82(2)–2.86(3) Å] and one H₂O [2.79(3) Å] and secondary barium---fluorine interactions [2.99(2)–3.31(2) Å] ensure high coordination numbers, from 9 to 11 for the metal centers. Hydrogen bonding between the apical fluoroisopropoxide, the water molecule and one THF molecule, non-bonded to a metal center, accounts for the stability of the hydrate and illustrates the Lewis acidity of fluoroalkoxides. Thermal decomposition leads to BaF₂.     

The reaction of (μ-H)2Os3(CO)9(PPh3) with ethylene affords the ethylidene complex (μ-H)2Os3(CO)9(PPh3)(μ-CHCH3)

The product isolated from the reaction of (μ-H)₂Os₃(CO)₉(PPh₃) with ethylene is shown to be the ethylidene complex (μ-H)₂Os₃(CO)₉(PPh₃)(μ-CHCH₃) (1) rather than the ethylene complex (μ-H)(H)Os₃(CO)₉(PPh₃)(C₂H₄), as previously claimed. The characterization of 1 is based on a combination of ¹H and ¹³C NMR results. The ¹H NMR data (δ 6.84 (1 H_D), 2.53 (3 H_C), J(CD) = 7.4 Hz) establish the presence of the ethylidene moiety, whereas detailed analysis of the 1-D and 2-D ¹³C NMR spectra of ¹³CO-enriched 1 indicates the relative positions of the ethylidene, hydride, and phosphine ligands on the triosmium framework.     

Tetra(μ3-hydroxo)hexa(μ2-carboxylato-O,O′)-bridged tetranuclear terbium(III) cubane complex

A novel tetranuclear terbium(III) complex [Tb₄(OH)₄(pybet)₆(H₂O)₈][Tb₄(OH)₄(pybet)₆(H₂O)₇ (NO₃)](ClO₄)₁₄·6H₂O has been synthesized and shown by X-ray crystallography to have a cubane-like Tb₄(μ₃-OH)₄(μ₂-carboxylato-O,O′)₆ core. The ligand pybet is pyridinoacetate, C₅H₅⁺N-CH₂CO₂⁻. Magnetic susceptibility data were measured for this Tb₄ complex in the range of 2.0–320 K and in fields of 1.0 G to 50.0 kG. It is concluded that either there is very weak antiferromagnetic exchange interaction (J = −0.015 cm⁻¹) or there is a small crystal-field splitting of the ⁷F₆ Tb^III ground state.     

Rhenium(I) methoxo carbonyl complexes containing tetraphosphine or triphosphine ligands; facile separation and X-ray crystallographic studies of d/l- and meso-[{Re2(μ-OMe)2(CO)6}2(μ,μ′-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetra-phosphadecane)]

Reaction of the activated mixture of Re₂(CO)_10, Me₃NO and MeOH with a 1:1 mixture of rac (d/l)- and meso-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane (hptpd) yields a mixture of (d/l)- and meso-[{Re₂(μ-OMe)₂(CO)₆}₂(μ,μ′-hptpd)] 1. The diastereomers can be easily separated by selective dissolution of d/l-1 in benzene, and give clearly distinguishable ¹H- and ³¹P-NMR spectra. The fluxional behavior of d/l-1 in solution has been studied by variable-temperature ¹H- and ³¹P-{¹H}-NMR spectroscopy. The crystal structures of both d/l- and meso-1 have been determined. Both molecules consist of two {Re₂(μ-OMe)₂(CO)₆} moieties which are bridged by the two P---CH₂---CH₂---P moieties of the hptpd ligand. Whilst the molecules of meso-1 possess crystallographic i-symmetry, those of d/l-1 do not have any crystallographic symmetry. These diastereomers therefore give clearly distinguishable Raman spectra in the solid state. Reaction of tris[2-(diphenylphosphino)ethyl]phosphine (tdppep) with the activated mixture affords the complex [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-tdppep)] 2, and the analogous reaction involving bis[2-diphenylphospinoethyl)phenylphosphine (triphos) gives [{Re₂(μ-OMe)₂(CO)₆}(μ,μ′,η³-triphos){Re₂(CO)₉}] 3 and [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-triphos)] 4.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

Structures and Mössbauer spectra of phosphido-bridged heterobimetallic complexes CpFe(CO)2(μ-PPh2)W(CO)5 and CpFe(CO)(μ-CO)(μ-PPh2)W(CO)4

Structures of non metal-metal bonded phosphido-bridged heterobimetallic complexes, including CpFe(CO)₂(μ-PPh₂)W(CO)₅ (1-W) and metal-metal bonded CpFe(CO)(μ-CO)(μ-PPh₂)W(CO)₄ (2), were determined by a single crystal X-ray diffraction study. In 1-W, the long distance between Fe and W indicates no metal-metal bond to exist. In 2, a Fe---W bond with bond length 2.851 Å and a semibridging carbonyl with W---C---O angle 153° were observed. Mössbauer spectra of 1-W and 2 were taken at 77 K. Isomer shifts of 1-W and 2 were − 0.0203 mm s⁻¹ and 0. 1917 mm s⁻¹ respectively.     

Structure and properties of the dinuclear complex [Co2(μ-OAc)2(OAc)2(μ-H2O)(phen)2]

The dinuclear complex [Co₂(μ-OAc)₂(OAc)₂(μ-H₂O)(phen)₂] has been prepared and its structure was determined. The compound crystallizes in the monoclinic space group P2(1)/c. The Co–Co distance is 3.574 Å and is similar to the Fe–Fe distance in the reduced methane monooxygenase hydroxylase. The electronic and IR spectra of the complex confirm octahedral coordination of the cobalt atoms and formation of strong O–HO hydrogen bonds in the solid state. The dependence of the magnetic susceptibility of the complex on temperature indicates an antiferromagnetic interaction, the value of the isotropic exchange parameter J was estimated to be −2.1 cm⁻¹. The ¹H NMR spectra show that in organic solvents the structure of compound is the same as in the solid state, however, in water solution the complex dissociates giving compounds with different Co:phen ratios.     

A novel arene bonding mode in the mixed-metal cluster Os4Ru(μ-H) 3(CO) 12(μ3-η-C6H5) P(OMe)3

The ionic coupling of [Os₄H₂(CO)₁₂]²⁻ with [Ru(η⁶-C₆H₆)(MeCN)₃]²⁺ affords the neutral mixed metal cluster Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆) 1. The reaction of 1 with trimethylphosphite leads to the initial formation of the addition product Os₄Ru(μH)₂(CO)₁₂(η⁶-C₆H₆)P(OMe)₃ 2, but this complex rearranges in solution to give Os₄Ru(μ-H)₃(CO)₁₂(μ₃-η⁶-C₆H₅)P(OMe)₃ 3. An X-ray structure of 3 shows that the metal core of the cluster is a ruthenium-spiked Os₄ tetrahedron, with one hydrogen atom from the arene having transferred to the Os₄ core, and one arene carbon bridging an Os-Os edge, while the ring as a whole remains η⁶-bound to the Ru atom.     

Reactions of the cationic diruthenium carbonyl complex [Ru2(μ-dppm)2(CO)4(μ,η-O2CMe)] with bidentate ligands; intramolecularly assisted stereospecific synthesis via the second-sphere face-to-face π–π stacking interactions

The reactions of the diruthenium carbonyl complexes [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]X (X=BF₄⁻ (1a) or PF₆⁻ (1b)) with neutral or anionic bidentate ligands (L,L) afford a series of the diruthenium bridging carbonyl complexes [Ru₂(μ-dppm)₂(μ-CO)₂(η²-(L,L))₂]X_n ((L,L)=acetate (O₂CMe), 2,2′-bipyridine (bpy), acetylacetonate (acac), 8-quinolinolate (quin); n=0, 1, 2). Apparently with coordination of the bidentate ligands, the bound acetate ligand of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ either migrates within the same complex or into a different one, or is simply replaced. The reaction of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ (1) with 2,2′-bipyridine produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)₂] (2), [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-bpy)]⁺ (3), and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-bpy)₂]²⁺ (4). Alternatively compound 2 can be prepared from the reaction of 1a with MeCO₂H–Et₃N, while compound 4 can be obtained from the reaction of 3 with bpy. The reaction of 1b with acetylacetone–Et₃N produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-acac)] (5) and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-acac)₂] (6). Compound 2 can also react with acetylacetone–Et₃N to produce 6. Surprisingly [Ru₂(μ-dppm)₂(μ-CO)₂(η²-quin)₂] (7) was obtained stereospecifically as the only one product from the reaction of 1b with 8-quinolinol–Et₃N. The structure of 7 has been established by X-ray crystallography and found to adopt a cis geometry. Further, the stereospecific reaction is probably caused by the second-sphere π–π face-to-face stacking interactions between the phenyl rings of dppm and the electron-deficient six-membered ring moiety of the bound quinolinate (i.e. the N-included six-membered ring) in 7. The presence of such interactions is indeed supported by an observed charge-transfer band in a UV–vis spectrum.     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.