Molecular Weight Characterization and Structural Properties of Controlled Molecular Weight Dextrans Synthesized by Acceptor Reaction using Highly Purified Dextransucrase

ABSTRACT

Controlled molecular weight dextrans were synthesized using a highly purified dextransucrase from Leuconostoc mesenteroides NRRL B-512F in a multi-step process. Maltose was used as acceptor for the first reaction step. The purified product obtained at a given reaction step was used as acceptor for the next reaction step. Dextrans of molecular weights ranging from 1,000 to 100,000 were thus obtained with a good yield (80 %). After purification, the molecular weight distribution of the products was characterized using size exclusion chromatography coupled with low angle laser light scattering (LALLS). Polydispersity of the products was shown to be similar to that of commerical dextrans.

¹³C NMR spectra and enzymatic hydrolysis data are consistent with the fact that the enzymatically synthesized dextrans are essentially composed of α(1->6) linkages. It was observed that controlled molecular weight dextrans were less branched than commercial products obtained by acidic hydrolysis of high molecular weight dextrans.     

Optimization of Oligosaccharide Synthesis from Cellobiose by Dextransucrase

There is a growing market for oligosaccharides as sweeteners, prebiotics, anticariogenic compounds, and immunostimulating agents in both food and pharmaceutical industries. Interest in novel carbohydrate-based products has grown because of their reduced toxicity and low immune response. Cellobiose is potentially valuable as a nondigestible sugar. The reaction of cellobiose, as an acceptor with a sucrose as a donor, catalyzed by a dextransucrase from Leuconostoc mesenteroides B-512FMCM, produced a series of cellobio-oligosaccharides. This production system was optimized using a Box–Behnken experimental design for 289 mM of sucrose and 250 mM of cellobiose and 54 U of the enzyme at pH 5.2 and 30 °C, to produce maximum yields of oligosaccharide.     

Efficient Production of Prebiotic Gluco-oligosaccharides in Orange Juice Using Immobilized and Co-immobilized Dextransucrase

Dextransucrase from Leuconostoc mesenteroides NRRL B-512F was subjected to immobilization and co-immobilization with dextranase from Chaetomium erraticum. Immobilization has enhanced the operational and storage stability of dextransucrase. Two hundred milligrammes (2.4 IU/mg) of alginate beads (immobilized and co-immobilized) were found to be optimum for the production of gluco-oligosaccharides (GOS) in orange juice with a high degree of polymerization. The pulp of the orange juice did not interfere in the reaction. In the batch process, co-immobilized dextransucrase (41 g/L) produced a significantly higher amount of GOS than immobilized dextransucrase (37 g/L). Alginate entrapment enhanced the thermal stability of dextransucrase for up to 3 days in orange juice at 30 °C. The production of GOS in semi-continuous process was 39 g/L in co-immobilized dextransucrase and 33 g/L in immobilized dextransucrase. Thus, immobilization technology offers a great scope in terms of reusability and efficient production of a value added functional health drink.     

Antiinfluenza virus activity of a bacteriocin produced by Lactobacillus delbrueckii

A novel antibacterial substance produced by Lactobacillus delbrueckii has been isolated and characterized (1). The inhibitory agent corresponded to the criteria for bacteriocins. It was active against lactic acid bacteria (LAB) species and several food-borne pathogens. The cell-free supernatant was purified by HPLC gel-filtration. Three preparations at different purification steps were tested for activity on the reproduction of influenza virus A/chicken/Germany, strain Weybridge (H7N7) and strain Rostock (H7N1) in cell cultures of chicken embryo fibroblasts (CEF). The inhibitory effect was shown to be highly selective and specific. Expression of viral glycoproteins hemagglutinin, neuraminidase, and nucleoprotein on the surface of infected cells, virus-induced cytopathic effect, infectious virus yield, and hemagglutinin production were all reduced at nontoxic concentrations of the crude preparation (B1). B1 did not protect cells from infection, did not affect adsorption, and slightly inhibited viral penetration into infected cells. The purification did not enhance the cellular toxicity and increased about 870-fold the virus-inhibitory activity. No inactivating effect on extracellular virus was found.     

Inhibition of dextransucrase by α-D-Glucose derivatives

alpha-D-Glucopyranosyl fluoride was modified at positions 2, 3, or 5 and these analogs were tested as substrates and inhibitors of dextransucrase from Leuconostoc mesenteroides B-512F. The analogs studied were 2-deoxy-2-fluoro-alpha-D-glucopyranosyl fluoride, 3-deoxy-3-fluoro-alpha-D-glucopyranosyl fluoride, 3-deoxy-3-thio-alpha-D-glucopyranosyl fluoride, and 5-thio-alpha-D-glucopyranosyl fluoride. Kinetic constants for alpha-D-glucopyranosyl fluoride were also determined. None of the alpha-D-glucopyranosyl fluorides were accepted as substrates for dextransucrase. 2-Deoxy-2-fluoro-alpha-D-glucopyranosyl fluoride, 3-deoxy-3-fgluoro-alpha-D-glucopyranosyl fluoride, and 3-deoxy-3-thio-alpha-D-glucopyranosyl fluoride were competitive inhibitors with Ki values of 63, 93, and 53 mM, respectively. The Km for alpha-D-glucopyranosyl fluoride was found to be 26 mM. The data indicate that the hydroxyl groups at C2 and C3 are important for proper binding of alpha-D-glucopyranosyl fluoride for the active site of dextransucrase and that the C3-hydroxyl probably acts as a hydrogen-bond donor.     

Application of Response Surface Methodology for Maximizing Dextransucrase Production from Leuconostoc mesenteroides NRRL B-640 in a Bioreactor

The production of dextransucrase from Leuconostoc mesenteroides NRRL B-640 was investigated using statistical approaches. Plackett-Burman design with six variables, viz. sucrose, yeast extract, K(2)HPO(4), peptone, beef extract, and Tween 80, was used to screen the nutrients that significantly affected the dextransucrase production. 2(4)-Central composite design with four selected variables (sucrose, K(2)HPO(4), yeast extract, and beef extract) was used for response surface methodology (RSM) for optimizing the enzyme production. The culture was grown under flask culture with 100 ml optimized medium containing 30 g/l sucrose, 18.5 g/l yeast extract, 15.3 g/l K(2)HPO(4), and 5 g/l beef extract at 25 degrees C and shaking at 200 rpm gave dextransucrase with specific activity of 0.68 U/mg. Whereas the same optimized medium in a 3.0-l bioreactor (1.4 l working volume) gave an experimentally determined value of specific activity of 0.70 U/mg, which was in perfect agreement with the predicted value of 0.65 U/mg by the statistical model.     

Simultaneous analytical optimization of variational parameters in Gaussian-type functions with full configuration interaction of multicomponent molecular orbital method by elimination of translational and rotational motions: application to isotopomers of the hydrogen molecule

We have extended the multicomponent molecular orbital (MCMO) method to the full-configuration interaction (full-CI) fully variational molecular orbital method by elimination of translational and rotational motion components from total Hamiltonian. In the MCMO scheme, the quantum effects of protons and deuterons as well as electrons can be directly taken into account. All variational parameters in the full-CI scheme, i.e., exponents and centers (alpha and R) in the Gaussian-type function (GTF) basis set as well as the CI coefficients, are simultaneously optimized by using their analytical gradients. The total energy of the H(2) molecule calculated using the electronic [6s3p2d1f] and nuclear [1s1p1d1f] GTFs is -1.161 726 hartree, which can be compared to the energy of -1.164 025 hartree reported using a 512 term-explicitly correlated GTF calculation. Although the d- and f-type nuclear GTFs contribute to the improvement of energy convergence, the convergence of electron-nucleus correlation energy is slower than that of electron-electron one. The nuclear wave functions are delocalized due to the electron-nucleus correlation effect compared to the result of Hartree-Fock level of MCMO method. In addition, the average internuclear distances of all diatomic molecules are within 0.001 A of the previously reported experimental results. The dipole moment of the HD molecule estimated by our method is 8.4 x 10(-4) D, which is in excellent agreement with the experimental result of (8-10) x 10(-4) D.     

Isolation and characterization of a variant of B16-mouse melanoma resistant to MSH growth inhibition.

A variant of B-16 F1 mouse melanoma was selected for its ability to survive and replicate in the presence of melanocyte-stimulating hormone (MSH). Although the variant (MR-4) was completely resistant to growth inhibition of MSH, cyclic AMP was still able to block cell replication. Tyrosinase activity in MR-4 cells was considerably lower than in B-16 F1 cells. MSH induced a two fold to three-fold increase in tyrosinase activity in both cell types, but the absolute activity in MR-4 remained significantly less than in the parental cells. MR-4 cells were also found to have a markedly depressed cyclic AMP-dependent protein kinase activity relative to B-16 F1 cells. The protein kinase from both cell types was stimulated by cyclic AMP, but the level of MR-4 kinase activity at maximal cyclic AMP concentrations remained considerably lower than B-16 F1 kinase activity under the same conditions. In both cell types adenylate cyclase activity was markedly stimulated by MSH. When equal numbers of viable F1 and MR-4 cells were injected subcutaneously into C57/B1 mice, the MR-4 cells formed tumors earlier and killed the host sooner than the parental F1 cells. We conclude that the biochemical alteration which allows MR-4 cells to replicate in the presence of MSH is a low level of tyrosinase activity, which in turn may be the result of low cyclic AMP-dependent protein kinase activity.     

Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20–30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.     

Growth and pectinase production by Aspergillus mexican strain protoplast regenerated under acidic stress

Protoplasts from Aspergillus sp. FP-180 and Aspergillus awamori NRRL-3112 were released and regenerated at extreme acidic conditions. The best conditions for protoplast release were 0.8 M KCI, pH 5.8, and 3h of digestion using mycelia from 12- to 16-h cultures from either Aspergillus sp. FP-180 or A. awamori NRRL-3112. The addition of fresh mycelia to an ongoing digestion after 1 h increased protoplast 4.5–5 times. A regeneration efficiency of 90% was attained at pH 6.0, and it was possible to regenerate protoplasts at pH 1.7 with a regeneration efficiency of 0.5% for Aspergillus sp. FP-180. The LpH-10 strain, derived from protoplast from Aspergillus sp FP-180, was able to regenerate at pH 1.7 and grow at pH values as low as 1.5, values at which the original strain is unable to grow. Regeneratio at extreme pH improved the performance of LpH-10 strain. It showed atwofold increase in cell growth at pH 2.0 in liquid culture and a higher pectinolytic activity in relation to that produced by the original strian.     

Analytical optimization of orbital exponents in Gaussian-type functions for molecular systems based on MCSCF and MP2 levels of fully variational molecular orbital method

We have analyzed the basis function series in molecular systems by optimization of orbital exponents in Gaussian-type functions (GTFs) including the electron correlation effects with multiconfiguration self-consistent field (MCSCF) and M?ller?CPlesset second-order perturbation (MP2) methods. First, we have derived and implemented the gradient formulas of MCSCF and MP2 energies with respect to GTF exponent, as well as GTF center and nuclear geometry, based on the fully variational molecular orbital (FVMO) method. Second, we have applied these electron-correlated FVMO methods to H₂, LiH, and hydrocarbon (CH₄, C₂H₆, C₂H₄, and C₂H₂) molecules. We have clearly demonstrated that the optimized exponent values with electron-correlated methods are different from those with simple Hartree?CFock method, since adequate basis functions for adequate virtual orbitals are indispensable to describe the accurate wave function and geometry for electron-correlated calculations.     

Detection of arsenobetaine in human blood

Arsenobetaine was detected and quantified unambiguously in human plasma, serum and red blood cells by the combination of HPLC with ICP MS. Three different column conditions, i.e. two ionpair chromatographies for anionic (LC-1) and cationic (LC-2) compounds and gel-permeation chromatography (LC-3), were employed to confirm the assignment. Arsenobetaine was detected in every sample as a major component of the water-soluble arsenic compounds, with an increasing concentration in plasma < serum < blood cell fractions. It was the sole detectable arsenic compound in LC-1 and LC-2, while a broad peak corresponding to high-molecular-weight compounds was identified in addition to arsenobetaine in LC-3.     

Production of bacterial cellulose from alternate feedstocks

Production of bacterial cellulose by Acetobacter xylinum ATCC 10821 and 23770 in static cultures was tested from unamended food process effluents. Effluents in cluded low-solids (LS) and high-solids (HS) potato effluents, cheese whey permeate (CW), or sugar beet raffinate (CSB). Strain 23770 produced 10% less cellulose from glucose than did strain 10821 and diverted more glucose to gluconate. Unamended HS, CW, and CSB were unsuitable for cellulose production by either strain, and LS was unsuitable for production by strain 10821. However, strain 23770 produced 17% more cellulose from LS than from glucose, indicating that unamended LS could serve as a feedstock for bacterial cellulose.     

5-Aminolaevulinic acid (ALA) induced formation of different fluorescent porphyrins: a study of the biosynthesis of porphyrins by bacteria of the human digestive tract

Aminolaevulinic acid (ALA) induces porphyrin formation in almost all living cells. The fluorescence spectra of porphyrins produced from a variety of 31 bacterial strains from the human oral cavity and other parts of digestive tract have been examined. Many of the bacteria exposed to ALA were able to induce protoporphyrin IX (PpIX) fluorescence, but under aerobic condition some bacteria can also produced different fluorescent porphyrins, in particular water-soluble porphyrins that can arise from an oxidation of the corresponding porphyrinogen precursors. The formation of fluorescent porphyrins can be different from one bacterial strain to another, but also one specific bacterium can form different fluorescent porphyrins. Irradiation of the ALA incubated cultures led to a rapid formation of water-soluble porphyrins exhibiting fluorescence maxima at wavelengths of 618-620 nm. This light induced formation of water-soluble porphyrins could be attributed to a photooxidation of the non-fluorescent (Uro/Copro)-porphyrinogen precursors. Addition of detergents to some of the bacterial cultures led to a strong PpIX fluorescence increase, indicating that some of the PpIX originally produced can be present in a non-fluorescent, probably aggregated, form. The large abundance of bacteria in the oral cavity and other parts of digestive tract, with their capacity to easily produce fluorescent porphyrins, indicates that such bacterial fluorescence should be suppressed during the ALA-based diagnosis of tumours in order to eliminate false positive results.     

Degradation of bacterial cell walls by immobilized lysozyme

Lysozyme was immobilized by two different methods in two different ways in order to obtain a preparation with an activity as high as possible toward a macromolecular substrate. The enzyme was bound as a Schiff base to a silicate carrier by using oxidized dextrans of different lengths as spacer and also was bound to controlled pore aminoglass via pyridino-4-aldehyde and BrCN. The latter preparations had activities up to 2.5% of the free lysozyme.     

Production of ceramide with Saccharomyces cerevisiae

The possibility of producing the biologically active material of the skin, ceramide, was studied using yeasts. The yeast strain that produced the most ceramide, Saccharomyces cerevisiae (KCCM 50515), was selected, and the optimal conditions for ceramide production were determined using shakeflask culture and batch fermentation. By measuring the production rate of ceramide at various pH values and temperatures, the optimal conditions for ceramide production were found to be pH 6.0 and 30°C. When heat shock was applied to the cells for 1 h by increasing the culture temperature from 30 to 40°C after cell growth, the amount of ceramide produced was increased 5.9-fold. A cell growth and ceramide production model was developed with Monod kinetics and the Leudecking-Piret model. It showed that ceramide production was increased when the cells were in the stationary phase.     

Influence of biomass and gold salt concentration on nanoparticle synthesis by the tropical marine yeast Yarrowia lipolytica NCIM 3589

Cell-associated gold nanoparticles and nanoplates were produced when varying number of Yarrowia lipolytica cells were incubated with different concentrations of chloroauric acid (HAuCl₄) at pH 4.5. With 10⁹ cells ml⁻¹ and 0.5 or 1.0 mM of the gold salt, the reaction mixtures developed a purple or golden red colour, respectively, and gold nanoparticles were synthesized. Nanoparticles of varying sizes were produced when 10¹⁰ cells ml⁻¹ were incubated with 0.5, 1.0 or 2.0 mM chloroauric acid salt. With 3.0, 4.0 or 5.0 mM HAuCl₄, nanoplates were also observed. With 10¹¹ cells ml⁻¹ nanoparticles were synthesized with almost all the gold salt concentrations. The cell-associated particles were released outside when nanoparticle-loaded cells were incubated at low temperature (20 °C) for 48 h. With increasing salt concentrations and a fixed number of cells, the size of the nanoparticles progressively increased. On the other hand, with increasing cell numbers and a constant gold salt concentration, the size of nanoparticles decreased. These results indicate that by varying the number of cells and the gold salt concentration, a variety of nanoparticles and nanoplates can be synthesized. Fourier transform infrared (FTIR) spectroscopy revealed the possible involvement of carboxyl, hydroxyl and amide groups on the cell surfaces in nanoparticle synthesis.     

Electron-electron and electron-nucleus correlation effects on exponent values of Gaussian-type functions for quantum protons and deuterons

Electron-electron and electron-nucleus correlation effects on exponent (alpha) values of Gaussian-type functions (GTFs) for quantum protons and deuterons in BH3, CH4, NH3, H2O, and HF molecular systems and their deuterated counterparts were analyzed using the second-order Moller-Plesset (MP2) level of theory of the multicomponent molecular orbital (MCMO-MP2) method. This method can simultaneously determine both nuclear and electronic wave functions. Results showed that the average alpha value (alpha(ave)) of the optimized alpha in single s-type ([1s]) GTF for a proton and a deuteron is similar to that determined using the Hartree-Fock level of the MCMO (MCMO-HF) method. In contrast, due to the electron-nucleus correlation effect, the s- and p-type ([1s1p]) GTFs are delocalized compared with those determined using the MCMO-HF method. For the H-bonded complexes, differences in the interaction energy induced by the H/D isotope effect were clearly evident because the D...Y bond distance for D complex is longer than the H...Y for H complex. Also, the basis set superposition error for the interaction energy in every H complex was similar to that in every D complex. The results here clearly demonstrate that the protonic and deuteronic basis functions based on alpha(ave) values for correlation effects can be applied to the detailed analysis of the quantum effects of protons and the H/D isotope effect in widespread fields that involve H bonds and weak interactions, such as the function of biological molecules, chemical reaction processes, and the design of new materials.     

Quality of correlating functions generated from commonly used basis sets

Tests have been performed on the quality of correlating functions generated from commonly used Gaussian basis sets, such as the 4-31G and MIDI-4 sets. The atoms tested were carbon, nitrogen, and oxygen. Self-consistent field and configuration interaction (CI) calculations were performed for the ground and lower excited states of neutral atoms as well as for positive and negative ions, using the original sets. Next, after adding (1) one d, and (2) two d and one f primitive Gaussian-type functions (GTFs) to the original sets, the CI calculations were repeated. In order to investigate the quality of the correlating orbitals generated from the GTF sets, parallel calculations to those for the GTF sets were carried out with an extended set of Slater-type functions. It was found that the excitation energies change in a stepwise manner as the basis sets changed from the original sets to the original set + 1d and the original set +2d1f. The improvements in excitation energies and ionization energies were almost independent of the original sets and were found to be strongly dependent on the augmented correlation functions. © 1996 by John Wiley & Sons, Inc.     

Plantaricin LD1: A Bacteriocin Produced by Food Isolate of Lactobacillus plantarum LD1

Plantaricin LD1, a bacteriocin produced by Lactobacillus plantarum LD1, was characterized for biochemical and antimicrobial properties. Bacteriocin showed stability at high temperatures (100 °C for 20 min and 121 °C for 15 min under 15 psi pressure), in a pH range of 2.0–8.0 and also in the presence of organic solvents, surfactants and detergents. The crude preparation was not affected by catalase, amylase and lipase but activity was reduced in the presence of pepsin, trypsin and proteinase K showing proteinaceous nature of the compound. The molecular weight of bacteriocin was found to be ～6.5 kDa, and antimicrobial activity was confirmed by bioassay. It inhibited not only related strains but also other Gram-positive and Gram-negative bacteria such as Lactobacillus curvatus NRRL B-4562, Lactococcus lactis subsp. lactis NRRL B-1821, Enterococcus faecium NRRL B-2354, Enterobacter cloacae NRRL B-14298, Micrococcus luteus, Staphylococcus aureus, urogenic Escherichia coli, Pseudomonas aeruginosa, Salmonella typhi, Shigella flexneri and Vibrio sp. These properties of plantaricin LD1 suggest its applications not only in food safety but in therapeutics as well.