铁氰化钾发光体系测定多巴酚丁胺

在NaOH碱性介质中,Fe(CN)3-6可直接氧化多巴酚丁胺产生化学发光,据此,结合流动注射技术,建立了直接化学发光测定多巴酚丁胺的方法。方法的线性范围和检出限分别为0.5～100μg·ml-1和0.3μg·ml-1,相对标准偏差(n=11)为1.1%。方法用于药物中多巴酚丁胺含量的测定,结果满意。     

多壁碳纳米管修饰玻碳电极测定多巴酚丁胺的研究

研究了多巴酚丁胺在多壁碳纳米管修饰电极上的电化学行为,建立了一种直接测定多巴酚丁胺的电化学方法。在0.3mol·L-1H2SO4底液中,氧化峰电位为0.57V(vs.Ag/AgCl),峰电流与多巴酚丁胺的浓度在5.0×10-8～1.0×10-5mol·L-1范围内呈良好的线性关系。该法的检出限为3.0×10-8mol·L-1。平均回收率为99.15%。1.0×10-5mol·L-1多巴酚丁胺平行测定8次的标准偏差为4.8%。用拟定的方法测定了多巴酚丁胺注射液中多巴酚丁胺的含量,结果满意。     

流动注射-化学发光法测定阿莫西林

阿莫西林在硫酸溶液中的降解产物与Ce(Ⅳ)在罗丹明6G的增敏作用下可产生化学发光。据此建立了流动注射化学发光测定阿莫西林的新方法。该方法线性范围为0.01～20.0mg·L~(-1),检出限为0.008mg·L~(-1),相对标准偏差(n=11,C=1.0mg·L~(-1)为0.7％。方法用于药物中阿莫西林含量的测定,结果满意。     

流动注射-化学发光法测定盐酸多巴酚丁胺

在磷酸介质中,利用高碘酸钠一过氧化氢-盐酸多巴酚丁胺化学发光体系,结合流动注射技术,建立了一种测定盐酸多巴酚丁胺含量的化学发光新方法。方法的线性范围为2.0×10~(-9)～1.0×10~(-6)g/mL,检出限为2.7×10~(-9)g/mL。测定结果的相对标准偏差为1.6％～2.1％,回收率为93.7％～97.7％。     

高效液相色谱与微超滤技术联用化学发光检测人体血清中的盐酸多巴酚丁胺

研究发现,盐酸多巴酚丁胺在碱性条件下能大大增强Luminol—K3Fe(CN)6化学发光强度,基于此,并结合HPLC分离技术,建立起盐酸多巴酚丁胺的HPLC-CL分析新方法。在C18反相键合相为色谱柱,乙腈为流动相的条件下,实现了对人体血清中的盐酸多巴酚丁胺的分离与测定。方法的线性范围为1．0～100μg／L,相关系数为0．9995;检出限为0．76μg/L;相对标准偏差为2.9％(n=11)。     

痕量多巴酚丁胺在碳糊电极上的吸附伏安行为及其痕量测定的研究

在0.1mol/L H₂SO₄底液中,用碳糊电极吸附伏安法测定多巴酚丁胺,阳极峰电位为0.46V(υS.SCE),峰电流与多巴酚丁胺的浓度在3.0×10^-9～1.0×10^-6mol/L范围内呈良好的线性关系.该法检测下限为1.5×10^-9mol/L,回收范围为94.00%～102.59%,相对标准偏差为3.1%(n=9).本文还对反应机理进行了初步探讨.     

电生次氯酸根流动注射化学发光法测定L-多巴

将恒电流电解产生ClO~-与流动注射化学发光分析法结合,基于L多巴对ClO~-Luminol体系化学发光的抑制作用,建立了测定L多巴流动注射化学发光新分析法.该法测定L多巴的检出限为8×10~(-10)g/mL,线性范围为2×10~(-9)～1×10~(-7)g/mL,相对标准偏差为3.0%.该法具有简单、快速、灵敏的特点,应用于药片中L多巴的测定,结果满意.     

酶催化光度法测定盐酸多巴酚丁胺

盐酸多巴酚丁胺属β肾上腺素受体激动药,用于治疗各种不同原因引起的心肌收缩力衰弱的心衰[1-2]。因此,探索简单、灵敏的测定盐酸多巴酚丁胺的方法对于临床医学和药物分析具有非常重要的意义。目前,文献报道的盐酸多巴酚丁胺的测定方     

高效液相色谱法测定盐酸多巴酚丁胺注射液中盐酸多巴酚丁胺的不确定度评定

评定高效液相色谱法测定盐酸多巴酚丁胺注射液中盐酸多巴酚丁胺含量的不确定度。建立测量值与输入量的数学模型,分别分析各不确定度分量,最终合成相对标准不确定度和扩展不确定度。当盐酸多巴酚丁胺含量为99.0%时,扩展不确定度为0.80%(k=2)。高效液相色谱法测定盐酸多巴酚丁胺注射液中盐酸多巴酚丁胺含量的不确定度的来源主要是天平称量误差、人员制备样品过程、仪器测量重复性,其中天平称量和样品溶液定容对测定结果影响较大。     

微流控芯片分析系统中硅胶整体柱和膜滤复合预处理单元的构建

以改性C18反相硅胶整体柱为微流控芯片分析系统中固相萃取介质材料, 构建不同功能单元的样品预处理微分析系统, 实现了血清样品中痕量盐酸多巴酚丁胺的富集. 初步构建了单一改性硅胶微柱固相萃取预处理单元, 测试得到了改性硅胶整体柱对血清中痕量盐酸多巴酚丁胺的平均富集倍数为77.2, RSD为12.35％. 为了提高测试的精密度, 进而设计含膜复合式预处理芯片, 探讨了不同预处理单元对血清样品中痕量盐酸多巴酚丁胺富集效率的影响, 优化设计了外接式硅胶整体柱-亲和膜微芯片固相萃取预处理单元, 复合式的反相硅胶整体柱对血清中微量盐酸多巴酚丁胺的平均富集倍数提高到89.4, RSD为4.37％. 结果显示了该预处理单元在血清中痕量药物富集的可行性和有效性.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.