聚氯乙烯接枝丙烯酸稀土的研究

将无机稀土有机化后与聚氯乙烯(PVC)进行接枝共聚。探讨了氧化稀土与丙烯酸反应、PVC接枝丙烯酸稀土的原理和方法，并通过红外光谱、扫描电镜对接枝共聚物进行定性表征，用微量热天平对接枝共聚物的热性能进行测定。实验结果表明，经丙烯酸稀土接枝共聚后的PVC，其耐热分解性能和韧性有了明显的提高。     

大豆蛋白接枝苯乙烯的合成及膜性能

大豆蛋白膜是无污染的包装涂布材料.但目前大豆蛋白膜尚不能取代合成高分子薄膜。其原因是亲水性使得它对水蒸气的阻隔有限,且它的力学性能无法达到要求。将苯乙烯接枝到大豆蛋白上,将有望提高大豆蛋白膜的力学性能。本文采用大豆分离蛋白和苯乙烯合成了接枝共聚物（SPI-g-PSt）。用流涎法分别制成SPI膜和SPI-g-PSt膜,并研究了它们的力学性能。     

甲基丙烯酸缩水甘油酯/苯乙烯固相接枝聚丙烯

以苯乙烯(St)为共单体，过氧化苯甲酰(BPO)为引发剂，采用固相接枝反应将甲基丙烯酸缩水甘油酯(GMA)接枝到聚丙烯(PP)大分子链上。研究了反应时间、单体用量、引发剂用量等因素对接枝率的影响。采用凝胶渗透色谱(GPE)测定了PP和接枝物PP-g-(GMA-St)的分子量和分子量分布。结果 表明固相接枝PP反应条件为[GMA／[St]=2，反应3．5h，加入GMA 10份，BPO 5份。St的加入有助于GMA与PP的接枝，同时在一定程度上抑制了PP的降解。     

丙烯腈──苯乙烯/聚丙烯接枝共聚合

丙烯腈（AN）—苯乙烯（St）与聚丙烯（PP）非均相接枝共聚，得杨梅形树脂。研究了AN／St摩尔比对接枝聚合的影响，发现苯乙烯相对含量增大时，非接枝物产量增加，接枝率和接枝效率相应下降。从接枝物的C、H、N分析可计算出聚丙烯、丙烯腈和苯乙烯的组成比例。此外，用二乙烯基苯（DVB）作交联剂，制备了PP－g－（AN－co－St－co－DVB）接枝共聚物—交联型薄壳树脂，交联剂的存在使单体转化率和接枝效率高达100％。     

苯乙烯在炭黑表面的阴离子接枝聚合研究

利用正丁基锂（ｎ－ＢｕＬｉ）与炭黑（ＣＢ）表面含氧基团反应制得了表面含－ＯＬｉ基团的反应型炭黑，以该炭黑与聚氧乙烯－聚氧丙烯－聚苯乙烯（ＰＥＯ－ＰＰＯ－ＰＳ）多嵌段聚合物组成的阴离子引发体系作活性中心，研究了苯乙烯在炭黑表面的阴离子接枝聚合。ＦＴ－ＩＲ，ＴＥＭ和ＤＳＣ分析表明在接枝炭黑表面存在苯乙烯的聚合物。接枝炭黑在甲苯中有良好的分散稳定性。     

球形聚丙烯粒子固相接枝苯乙烯的研究

用负载型高效球形催化剂催化丙烯本体聚合获得了孔隙率较高的球形聚丙烯 (PP)粒子 .研究了苯乙烯在这种球形多孔PP粒子中的接枝聚合反应 ,考察了各种聚合条件对接枝率及接枝效率的影响 ,并用FTIR、DSC、GPC、粘度测定及偏光显微镜 (PLM)等方法表征了接枝聚合产物的结构和形态 .研究表明 ,球形PP粒子固相接枝苯乙烯不仅可达较高接枝率 (最高达 2 4 % )和接枝效率 (最高达 5 6 7% ) ,PS相区尺寸小、分布均匀 ,而且产物为形态规则的球形颗粒 ,有利于防止聚合物结块和粘壁 .但PP接枝PS后分子量有所下降 ,表明PP接枝PS的同时伴随着轻微的降解     

氯化聚氯乙烯热稳定性研究 Ⅰ.氯含量对热稳定性影响

本文用红外光谱分析了聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)的分子结构,用电导法评价了它们的热稳定性. 试料 PVC系天津化工厂生产,XS-7型;CPVC系前者的氯化产品,由安徽化工研究所提供,含氯量64％,日本产CPVC,牌号H827,含氯量68.5％.     

聚四氟乙烯微粉辐照接枝苯乙烯的XPS研究

聚四氟乙烯微粉辐照接枝苯乙烯的ＸＰＳ研究许观藩，罗云霞，杨弘（中国科学院长春应用化学研究所，长春，１３００２２）关键词聚四氟乙烯，苯乙烯，表面接枝，ＸＰＳ用辐照方法在疏水性高聚物材料表面接枝聚合亲水性单体，可以达到改性的目的．文献中所用的高聚物材料包...     

苯乙烯在蚕丝丝胶上接枝共聚的研究

<正> 蚕丝丝胶(Silk Sercin简写SS)是由十八种氨基酸缩合而成的天然旦白,占蚕茧重量的20—30％,由于它溶于水,在缫丝过程中随废水而流失。我们曾对丝胶-金属络合物的制备及其对DL和L-3,4二羟基苯丙氨酸氧化催化活性进行了研究。本文研究了苯乙烯(St)在丝胶上接枝共聚的机理及规律,用红外光谱、差示扫描量热法、热重     

Al(OH)3和Mg(OH)2对PVC热解特性的影响研究

利用热重分析仪并借助电导率测定法探讨了Al(OH)3和Mg(OH)2对PVC热解特性的影响,简要分析了其机理。结果表明:加入Al(OH)3和Mg(OH)2后均能增加PVC体系在第一阶段的最大热解速率和残炭量,最大热解速率增加约1倍,残炭量增加约4倍。并且分解产生的结晶水吸收大量的热量,惰性金属氧化物也有利于成核、炭层生长和凝聚,有着明显的阻燃和抑烟作用。HCl毒性气体的释放主要集中在体系的第一阶段,Al(OH)3能促使HCl提前释放,HCl的释放总量增加,Mg(OH)2也能促使HCl提前释放,但HCl的释放总量却是减少的。     

Allylated PVC

Active chlorines in poly(vinyl chloride) (PVC) were quantitatively replaced by pendant allyl groups ( CH₂CHCH₂) with allyltrimethylsilane in the presence of Friedel–Crafts acids (e.g., Et₂AlCl and TiCl₄). The thermal stability of the allylated PVCs was significantly superior to that of the starting material. Our allylation method is essentially quantitative; indeed, it was used for the determination of the active chlorine content in the PVCs. Furthermore, the pendant allyl groups were quantitatively oxidized by m‐chloroperbenzoic acid to epoxides; thus, PVCs carrying propylene oxide substituents [ CH₂CH CH₂(O)] were prepared. The structures of the products were characterized by high‐resolution NMR spectroscopy, and their thermal characteristics were characterized by TGA and color formation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 307–312, 2001     

Improvement of Structural and Thermal Stabilities of PVC and Wood/PVC Composite by Zn and Pb Stearates,and Zeolite

Three different chemical stabilizers were introduced into neat PVC and a wood/PVC composite (containing 50 phr wood flour) to improve their thermal and structural stabilities. The changes in CIE yellowness index, polyene index, %wt loss, and decomposition temperature (T_d) were monitored. The effects of type and content of thermal stabilizers, thermal ageing time, and the presence of wood flour were our main interests. The experimental results suggested that the additions of Zn and Pb stearates into PVC and wood/PVC composite could improve the thermal stability of the PVC. At the test temperature of 177°C, the additions of Zn and Pb stearates could improve the thermal stabilities of PVC by retarding the upzipped reaction and by reducing the conjugated double bonds in PVC, Pb stearate being the most suitable for thermally stabilizing the PVC. Around the T_d range (～264°C), the addition of Zn stearate reduced the T_d value of PVC whereas that of Pb stearate had no effect on the change in T_d value. Zeolite loading could shift the T_d value of the PVC from 264 to 280°C. The addition of wood particles increased the polyene content and decreased the decomposition temperature of the PVC. The effect of wood flour on the thermal and structural changes of PVC overruled that of thermal stabilizer loading.     

PVC硬脂酸轻稀土热稳定剂的复配与应用研究

为了进一步研发性价比高且"无铅化"的稀土复合热稳定剂,研究了系列硬脂酸轻稀土盐(镧/铈/镨/钕/钐/铕/混合)与其他常用PVC热稳定(助)剂的复配效果。通过刚果红试纸法、红外光谱分析(FT-IR)、转矩流变仪等探究了复合热稳定剂对PVC性能的影响。结果表明:复合热稳定剂配方为硬脂酸轻稀土盐0.7~1.0份、硬脂酸锌0.8~0.9份、β-二酮0.3~0.6份和季戊四醇0.8~0.9份。将3份复合热稳定剂添加到100份PVC树脂中,静态及动态热稳定时间延长至100和35 min左右;动态热稳定性能和力学性能优于市售钙锌热稳定剂,与市售铅盐较接近。红外光谱分析表明复合热稳定剂可在加热初期减缓PVC氧化降解,较好地抑制初期着色,对PVC性能影响顺序为:镧组钕组混合组铈组镨组钐组铕组。     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Migration of Additives from Poly(vinyl chloride) (PVC) Tubes into Aqueous Media

The stability and migration product of medical PVC tubes plasticized with polyadipates were investigated by ageing in phosphate buffer at pH 1.679 and water at different temperatures. Changes in the PVC tubes were studied by water absorption, weight loss, Fourier infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The low molecular weight migration product that was released was extracted and silylanized before gas chromatography/mass spectroscopy (GC/MS) identification and quantification. After 70 days, the weight loss was less than 0.5% and only a small amount of adipic acid migrated when a tube was aged at 37°C in water and phosphate buffer (pH 1.679), and at 70°C in water after 56 days. However, when aged at 70 and 110°C, gradual deactivation of heat stabilizer after 21 days of ageing in buffer solution and separation of plasticizer from PVC matrix occurred. When the tube was aged at 110°C, significant degradation of both polyadipates and PVC were observed. Adipic acid and 1,4-butanediol monomers and oligomers of polyadipate were the major migration products from polyadipates in the water ageing solution, while only a relatively high amount of adipic acid was identified as the main product in the buffer ageing solution.     

Development of PVC/Silica Hybrids Using PVC Plastisols

A novel method for producing a plasticised PVC with increased porosity has been developed, by the use of an organic-inorganic hybrid. Silica was produced in situ from tetraethoxysilane via a hydrolytic sol-gel processing route. Tetrahydrofuran was used as co-solvent, and γ-glycidyloxypropyl-trimethoxysilane as coupling agent. The films produced were transparent, with moderate mechanical properties. A film containing 20% silica showed a 45% increase in water vapour permeability.     

PVC/MBS共混物的紫外光交联及光氧化反应

PVC及其共混物应用广泛,MBS作为PVC制品的透明抗冲改性剂,在提高PVC抗冲性能的同时,必然影响PVC在紫外光照下发生的光化学反应过程,我们用紫外可见光研究了MBS对PVC紫外光解脱HCl动力学,发现MBS对PVC光解脱HCl有抑制作用,本文利用FTIR光谱研究PVC／MBS共混体系中,MBS对PVC光氧化、光交联及光降解过程的影响。     

Thermal stability of poly(styrene) containing no head-to-head units

General purpose poly(styrene) prepared by conventional radical techniques contains a head-to-head unit as a consequence of polymerization termination by radical coupling. As has been previously demonstrated, thermal stress promotes homolysis of the bond linking the head-to-head components. The macroradicals generated depolymerize rapidly to generate styrene monomer. This decomposition during processing can lead to finished articles containing objectionable levels of styrene monomer, particularly for food packaging applications in which even low levels of monomer can promote objectionable taste and aroma. Polymer containing no head-to-head units should not be prone to this facile decomposition. In this instance, poly(styrene) has been prepared by nitroxyl-mediated polymerization of styrene monomer followed by reductive removal of nitroxyl end groups. Polymer prepared in this manner contains no head-to-head units and displays thermal stability much greater than that observed for conventional poly(styrene). A direct comparison of the stability for the two polymers is readily available by thermogravimetric techniques. A quantitative reflection of the difference in stability is available from the rate constants for the respective decomposition.