Protein biosensors based on biofunctionalized conical gold nanotubes

There is increasing interest in the concept of using nanopores as the sensing elements in biosensors. The nanopore most often used is the alpha-hemolysin protein channel, and the sensor consists of a single channel embedded within a lipid bilayer membrane. An ionic current is passed through the channel, and analyte species are detected as transient blocks in this current associated with translocation of the analyte through the channel-stochastic sensing. While this is an extremely promising sensing paradigm, it would be advantageous to eliminate the very fragile lipid bilayer membrane and perhaps to replace the biological nanopore with an abiotic equivalent. We describe here a new family of protein biosensors that are based on conically shaped gold nanotubes embedded within a mechanical and chemically robust polymeric membrane. While these sensors also function by passing an ion current through the nanotube, the sensing paradigm is different from the previous devices in that a transient change in the current is not observed. Instead, the protein analyte binds to a biochemical molecular-recognition agent at the mouth of the conical nanotube, resulting in complete blockage of the ion current. Three different molecular-recognition agents, and correspondingly three different protein analytes, were investigated: (i) biotin/streptavidin, (ii) protein-G/immunoglobulin, and (iii) an antibody to the protein ricin with ricin as the analyte.     

An Engineered OmpG Nanopore with Displayed Peptide Motifs for Single-Molecule Multiplex Protein Detection

Molecular detection via nanopore, achieved by monitoring changes in ionic current arising from analyte interaction with the sensor pore, is a promising technology for multiplex sensing development. Outer Membrane Protein G (OmpG), a monomeric porin possessing seven functionalizable loops, has been reported as an effective sensing platform for selective protein detection. Using flow cytometry to screen unfavorable constructs, we identified two OmpG nanopores with unique peptide motifs displayed in either loop 3 or 6, which also exhibited distinct analyte signals in single-channel current recordings. We exploited these motif-displaying loops concurrently to facilitate single-molecule multiplex protein detection in a mixture. We additionally report a strategy to increase sensor sensitivity via avidity motif display. These sensing schemes may be expanded to more sophisticated designs utilizing additional loops to increase multiplicity and sensitivity.     

Effect of crown ether on ion currents through synthetic membranes containing a single conically shaped nanopore

Ion-current measurements were made on synthetic polymer membranes that contained a single conically shaped nanopore. This entailed placing an electrolyte solution on either side of the membrane, using an electrode placed in each solution to control the transmembrane potential, and measuring the resulting transmembrane ion current. The effect of the crown ether commonly called 18-crown-6 (18C6) on the measured ion current was investigated. Adding 18C6 to the electrolyte solution on one side of a conical nanopore membrane provides a way to rectify the ion current flowing through the nanopore. This chemical rectification is observed only when the cation of the electrolyte is complexed by 18C6 (e.g., K+), and when the mouth diameter of the conical nanopore is of molecular dimensions, in this case approximately 1.5 nm. This chemical rectification can either augment or diminish the inherent electrostatic rectification observed with these small mouth-diameter nanopores. We have interpreted these results using a model based on the formation of a junction potential at the membrane-solution interface. This junction potential arises because the transference number for the K+-18C6 complex in bulk solution is larger than its transference number in the mouth of the conical nanopore.     

Stochastic nanopore sensors for the detection of terrorist agents: Current status and challenges

Nanopore stochastic sensor works by monitoring the ionic current modulations induced by the passage of analytes of interest through a single pore, which can be obtained from a biological ion channel by self-assembly or artificially fabricated in a solid-state membrane. In this minireview, we overview the use of biological nanopores and artificial nanopores for the detection of terrorist agents including explosives, organophosphorus nerve agents, nitrogen mustards, organoarsenic compounds, toxins, and viruses. We also discuss the current challenge in the development of deployable nanopore sensors for real-world applications.     

The effects of electrostatic correlations on the ionic current rectification in conical nanopores

Ion‐ion electrostatic correlations are recognized to play a significant role in the presence of concentrated multivalent electrolytes. To account for their impact on ionic current rectification phenomenon in conical nanopores, we use the modified continuum Poisson‐Nernst‐Planck (PNP) equations by Bazant et al. Coupled with the Stokes equations, the effects of the EOF are also included. We thoroughly investigate the dependence of the ionic current rectification ratios as a function of the double layer thickness and the electrostatic correlation length. By considering the electrostatic correlations, the modified PNP model successfully captures the ionic current rectification reversal in nanopores filled with lanthanum chloride LaCl₃. This finding qualitatively agrees with the experimental observations that cannot be explained by the standard PNP model, suggesting that ion‐ion electrostatic correlations are responsible for this reversal behavior. The modified PNP model not only can be used to explain the experiments, but also go beyond to provide a design tool for nanopore applications involving multivalent electrolytes.     

Protein detection by nanopores equipped with aptamers

Protein nanopores have been used as stochastic sensors for the detection of analytes that range from small molecules to proteins. In this approach, individual analyte molecules modulate the ionic current flowing through a single nanopore. Here, a new type of stochastic sensor based on an αHL pore modified with an aptamer is described. The aptamer is bound to the pore by hybridization to an oligonucleotide that is attached covalently through a disulfide bond to a single cysteine residue near a mouth of the pore. We show that the binding of thrombin to a 15-mer DNA aptamer, which forms a cation-stabilized quadruplex, alters the ionic current through the pore. The approach allows the quantification of nanomolar concentrations of thrombin, and provides association and dissociation rate constants and equilibrium dissociation constants for thrombin·aptamer interactions. Aptamer-based nanopores have the potential to be integrated into arrays for the parallel detection of multiple analytes.     

Pressure-dependent ion current rectification in conical-shaped glass nanopores

Ion current rectification that occurs in conical-shaped glass nanopores in low ionic strength solutions is shown to be dependent on the rate of pressure-driven electrolyte flow through the nanopore, decreasing with increasing flow rate. The dependence of the i-V response on pressure is due to the disruption of cation and anion distributions at equilibrium within the nanopore. Because the flow rate is proportional to the third power of the nanopore orifice radius, the pressure-driven flow can eliminate rectification in nanopores with radii of ～200 nm but has a negligible influence on rectification in a smaller nanopore with a radius of ～30 nm. The experimental results are in qualitative agreement with predictions based on finite-element simulations used to solve simultaneously the Nernst-Planck, Poisson, and Navier-Stokes equations for ion fluxes in a moving electrolyte within a conical nanopore.     

Surface-charge induced ion depletion and sample stacking near single nanopores in microfluidic devices

We report integrated nanopore/microchannel devices in which single nanopores are isolated between two microfluidic channels. The devices were formed by sandwiching track-etched conical nanopores in a poly(ethylene terephthalate) membrane between two poly(dimethylsiloxane) microchannels. Integration of the nanopores into microfluidic devices improves mass transport to the nanopore and allows easy coupling of applied potentials. Electrical and optical characterization of these individual nanopores suggests double layer overlap is not required to form an ion depletion region adjacent to the nanopore in the microchannel; rather, excess surface charge in the nanopore contributes to the formation of this ion depletion region. We used fluorescent probes to optically map the ion depletion region and the stacking of fluorescein near the nanopore/microchannel junction, and current measurements confirmed formation of the ion depletion region.     

Scan-rate-dependent ion current rectification and rectification inversion in charged conical nanopores

Herein we report a theoretical study of diode-like behavior of negatively charged (e.g., glass or silica) nanopores at different potential scan rates (1-1000 V·s(-1)). Finite element simulations were used to determine current-voltage characteristics of conical nanopores at various electrolyte concentrations. This study demonstrates that significant changes in rectification behavior can be observed at high scan rates because the mass transport of ionic species appears sluggish on the time scale of the voltage scan. In particular, it explains the influence of the potential scan rate on the nanopore rectifying properties in the cases of classical rectification, rectification inversion, and the "transition" rectification domain where the rectification direction in the nanopore could be modulated according to the applied scan rate.     

Control of ionic transport through gated single conical nanopores

Control of ionic transport through nanoporous systems is a topic of scientific interest for the ability to create new devices that are applicable for ions and molecules in water solutions. We show the preparation of an ionic transistor based on single conical nanopores in polymer films with an insulated gold thin film “gate.” By changing the electric potential applied to the “gate,” the current through the device can be changed from the rectifying behavior of a typical conical nanopore to the almost linear behavior seen in cylindrical nanopores. The mechanism for this change in transport behavior is thought to be the enhancement of concentration polarization induced by the gate. Figure   Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

用于纳米孔道分析的四通道电化学传感器设计与仿真

纳米孔道技术是一种基于空间限域的超灵敏的单分子分析技术.通过研究单个分子限域于纳米孔道中所产生的离子电流的变化,可在单分子尺度上获取其结构、尺寸、电性及与孔道间弱相互作用的信息.目前主要应用的纳米孔道测量仪器单次实验仅能测量单个纳米孔道,其检测通量较低.本文基于实验室前期自主设计研制的单通道纳米孔道测量仪器Cube-D2上,比较研究了两种互阻放大器的测量特性,从而选择了合适的测量电路设计了四通道电化学传感器放大电路.进一步通过仿真验证了四通道电化学传感器设计方案的可行性,为阵列化高通量纳米孔道单分子电化学测量仪器的设计提供了理论基础.     

Resistive-pulse studies of proteins and protein/antibody complexes using a conical nanotube sensor

There is increasing interest in using nanopores in synthetic membranes as resistive-pulse sensors for molecular and macromolecule analytes. In general, this method entails measuring current pulses associated with translocation of the analyte through the nanopore sensor element. A key challenge for this sensing paradigm is building selectivity into the protocol so that the current pulses for the target analyte can be distinguished from current pulses for other species that might be present in the sample. We show here that this can be accomplished with a protein analyte by adding to the solution an antibody that selectively binds the protein. We demonstrate this concept using bovine serum albumin (BSA) and a Fab fragment from a BSA-binding polyclonal antibody. Because the complex formed upon binding of the Fab to BSA is larger than the free BSA molecule, the current-pulse signature for the BSA/Fab complex can be easily distinguished from the free BSA. Furthermore, the BSA/Fab pulses can be easily distinguished from the pulses obtained for the free Fab and from pulses obtained for a control protein that does not bind to the Fab. Finally, we also show that the current-pulse signature for the BSA/Fab complex can provide information about the size and stoichiometry of the complex.     

Nanopore membrane-based electrochemical immunoassay

Using nanotechnology in the immunoassay field, Lynntech has developed a nanopore-based sensor with electrochemical signal transduction for the detection of biologically relevant molecular targets. Antibodies of interest were immobilized on the inside wall of nanopores and the antibody–antigen interaction was monitored by measuring the ionic conductance through the nanopores. We have used electrochemical impedance spectroscopy to monitor the changes in the ionic conductance due to the antibody–antigen interaction. To aid the development of a portable, fast immunoassay instrument, we have selected specific impedance frequency values that are very sensitive to the ionic conductance changes. Biomarkers of prostate cancer, prostate-specific antigen and hepsin, were successfully assayed by the nanopore membrane-based electrochemical immunoassay in both phosphate-buffered saline and plasma medium.     

Ion current rectification and rectification inversion in conical nanopores: a perm-selective view

Ionic transport in charged conical nanopores is known to give rise to ion current rectification. The present study shows that the rectification direction can be inverted when using electrolyte solutions at very low ionic strengths. To elucidate these phenomena, electroneutral conical nanopores containing a perm-selective region at the tip have been investigated and shown to behave like classical charged nanopores. An analytical model is proposed to account for these rectification processes.     

Gating of single synthetic nanopores by proton-driven DNA molecular motors

Switchable ion channels that are made of membrane proteins play different roles in cellular circuits. Since gating nanopore channels made of proteins can only work in the environment of lipid membrane, they are not fully compatible to the application requirement as a component of those nanodevice systems in which lipid membranes are hard to establish. Here we report a synthetic nanopore-DNA system where single solid-state conical nanopores can be reversibly gated by switching DNA motors immobilized inside the nanopores. High- (on-state) and low- (off-state) conductance states were found within this nanopore-DNA system corresponding to the single-stranded and i-motif structures of the attached DNA motors. The highest gating efficiency indicated as current ratio of on-state versus off-state was found when the length of the attached DNA molecule matched the tip diameter of the nanopore well. This novel nanopore-DNA system, which was gated by collective folding of structured DNA molecules responding to the external stimulus, provided an artificial counterpart of switchable protein-made nanopore channels. The concept of this DNA motor-driven nanopore switch can be used to build novel, biologically inspired nanopore machines with more precisely controlled functions in the near future by replacing the DNA molecules with other functional biomolecules, such as polypeptides or protein enzymes.     

Metal ion affinity-based biomolecular recognition and conjugation inside synthetic polymer nanopores modified with iron-terpyridine complexes

Here we demonstrate a novel biosensing platform for the detection of lactoferrin (LFN) via metal-organic frameworks, in which the metal ions have accessible free coordination sites for binding, inside the single conical nanopores fabricated in polymeric membrane. First, monolayer of amine-terminated terpyridine (metal-chelating ligand) is covalently immobilized on the inner walls of the nanopore via carbodiimide coupling chemistry. Second, iron-terpyridine (iron-terPy) complexes are obtained by treating the terpyridine modified-nanopores with ferrous sulfate solution. The immobilized iron-terPy complexes can be used as recognition elements to fabricate biosensing nanodevice. The working principle of the proposed biosensor is based on specific noncovalent interactions between LFN and chelated metal ions in the immobilized terpyridine monolayer, leading to the selective detection of analyte protein. In addition, control experiments proved that the designed biosensor exhibits excellent biospecificity and nonfouling properties. Furthermore, complementary experiments are conducted with multipore membranes containing an array of cylindrical nanopores. We demonstrate that in the presence of LFN in the feed solution, permeation of methyl viologen (MV(2+)) and 1,5-naphthalenedisulphate (NDS(2-)) is drastically suppressed across the iron-terPy modified membranes. On the basis of these findings, we envision that apart from conventional ligand-receptor interactions, the designing and immobilization of alternative functional ligands inside the synthetic nanopores would extend this method for the construction of new metal ion affinity-based biomimetic systems for the specific binding and recognition of other biomolecules.     

Modeling electrochemical deposition inside nanotubes to obtain metal-semiconductor multiscale nanocables or conical nanopores

Nanocables with a radial metal-semiconductor heterostructure have recently been prepared by electrochemical deposition inside metal nanotubes. First, a bare nanoporous polycarbonate track-etched membrane is coated uniformly with a metal film by electroless deposition. The film forms a working electrode for further deposition of a semiconductor layer that grows radially inside the nanopore when the deposition rate is slow. We propose a new physical model for the nanocable synthesis and study the effects of the deposited species concentration, potential-dependent reaction rate, and nanopore dimensions on the electrochemical deposition. The problem involves both axial diffusion through the nanopore and radial transport to the nanopore surface, with a surface reaction rate that depends on the axial position and the time. This is so because the radial potential drop across the deposited semiconductor layer changes with the layer thickness through the nanopore. Since axially uniform nanocables are needed for most applications, we consider the relative role of reaction and axial diffusion rates on the deposition process. However, in those cases where partial, empty-core deposition should be desirable (e.g., for producing conical nanopores to be used in single nanoparticle detection), we give conditions where asymmetric geometries can be experimentally realized.     

Selectively detecting attomolar concentrations of proteins using gold lined nanopores in a nanopore blockade sensor

Disease diagnosis at earlier stages requires the development of ultrasensitive biosensors for detecting low-abundance biomarkers in complex biological fluids within a reasonable time frame. Here, we demonstrate the development of an ultrasensitive nanopore blockade biosensor that can rapidly diagnose a model protein biomarker, prostate-specific antigen (PSA) with high selectivity. The solid-state nanopores have gold located only along the length of the nanopore whilst the rest of the membrane is silicon nitride. The orthogonal use of materials allows nanopore arrays with a different surface chemistry inside the nanopore relative to the rest of the membrane to be fabricated. The importance of this differential surface chemistry is it can improve the detection limit of nanopore blockade sensors in quantitative analysis. Based on such functionalized nanopore devices, nanopore blockade sensors lower the limit of detection by an order of magnitude and enable ultrasensitive detection of PSA as low as 80 aM. The findings from this study open new opportunities for nanopore sensors in further developments including optical detection and ultralow detection limit biosensing at complex biological fluids.

Selective detection of attomolar proteins was achieved using gold lined nanopores in a nanopore blockade sensor.     

Electrical network of nanofluidic diodes in electrolyte solutions: Connectivity and coupling to electronic elements

We consider a nanopore network with simple connectivity, demonstrating a two-dimensional circuit (full-wave rectifier) with ensembles of conical pores acting as nanofluidic diodes. When the bridge nanopore network is fed with an input potential signal of fluctuating polarity, a fixed output polarity is obtained. The full-wave rectification characteristics are demonstrated with square, sinusoidal, and white noise input waveforms. The charging of a load capacitor located between the two legs of the bridge demonstrates that the nanofluidic network is effectively coupled to this electronic element. These results can be relevant for energy transduction and storage procedures with nanopores immersed in electrolyte solutions. Because the individual nanofluidic resistances can be modulated by chemical, electrical, and optical signals, the balanced bridge circuit can also be useful to miniaturize nanopore-based sensing devices.     

Electrokinetic transport of nanoparticles in functional group modified nanopores

Nanopore detection is a hot issue in current research. One of the challenges is how to slow down the transport velocity of nanoparticles in nanopores. In this paper, we propose a functional group modified nanopore. That means a polyelectrolyte brush layer is grafted on the surface of the nanopore to change the surface charge properties. The existing studies generally set the charge density of the brush layer to a fixed value. On the contrary, in this paper, we consider an essential property of the brush layer: the volume charge density is adjustable with pH. Thus, the charge property of the brush layer will change with the local H⁺ concentration. Based on this, we established a mathematical model to study the transport of nanoparticles in polyelectrolyte brush layer modified nanopores. We found that pH can effectively adjust the charge density and even the polarity of the brush layer. A larger pH can reduce the transport velocity of nanoparticles and improve the blockade degree of ion current. The grafting density does not change the polarity of the brush charge. The larger the grafting density, the greater the charge density of the brush layer, and the blockade degree of ion current is also more obvious. The polyelectrolyte brush layer modified nanopores in this paper can effectively reduce the nanoparticle transport velocity and retain the essential ion current characteristics, such as ion current blockade and enhancement.