Temperature-sensitive photoluminescence of CdSe quantum dot clusters

The formation of narrow size dispersed and nanometer size aggregates (clusters) of cadmium selenide (CdSe) quantum dots (QDs) and their temperature-sensitive photoluminescence (PL) spectral properties close to room temperature (298 K) are discussed. CdSe QDs formed stable clusters with an average diameter of approximately 27 nm in the absence of coordinating solvents. Using transmission electron microscopy (TEM) imaging, we identified the association of individual QDs with 2-5 nm diameters into clusters of uniform size. A suspension of these clusters in different solvents exhibited reversible PL intensity changes and PL spectral shifts which were correlated with temperature. Although the PL intensity of CdSe QDs encapsulated in host matrixes and the solid state showed a response to temperature under cryogenic conditions, the current work identified for the first time QD clusters showing temperature-sensitive PL intensity variations and spectral shifts at moderate temperatures above room temperature. Temperature-sensitive reversible PL changes of clusters are discussed with respect to reversible thermal trapping of electrons at inter-QD interfaces and dipole-dipole interactions in clusters. Reversible luminescence intensity variations and spectral shifts of QD clusters show the potential for developing sensors based on QD nanoscale assemblies.     

A Ligand System for the Flexible Functionalization of Quantum Dots via Click Chemistry

We present a novel ligand, 5‐norbornene‐2‐nonanoic acid, which can be directly added during established quantum dot (QD) syntheses in organic solvents to generate “clickable” QDs at a few hundred nmol scale. This ligand has a carboxyl group at one terminus to bind to the surface of QDs and a norbornene group at the opposite end that enables straightforward phase transfer of QDs into aqueous solutions via efficient norbornene/tetrazine click chemistry. Our ligand system removes the traditional ligand‐exchange step and can produce water‐soluble QDs with a high quantum yield and a small hydrodynamic diameter of approximately 12 nm at an order of magnitude higher scale than previous methods. We demonstrate the effectiveness of our approach by incubating azido‐functionalized CdSe/CdS QDs with 4T1 cancer cells that are metabolically labeled with a dibenzocyclooctyne‐bearing unnatural sugar. The QDs exhibit high targeting efficiency and minimal nonspecific binding.     

Organic-inorganic nanocomposites via directly grafting conjugated polymers onto quantum dots

Nanocomposites of poly(3-hexylthiophene)-cadmium selenide (P3HT-CdSe) were synthesized by directly grafting vinyl-terminated P3HT onto [(4-bromophenyl)methyl]dioctylphosphine oxide (DOPO-Br)-functionalized CdSe quantum dot (QD) surfaces via a mild palladium-catalyzed Heck coupling, thereby dispensing with the need for ligand exchange chemistry. The resulting P3HT-CdSe nanocomposites possess a well-defined interface, thus significantly promoting the dispersion of CdSe within the P3HT matrix and facilitating the electronic interaction between these two components. The photophysical properties of nanocomposites were found to differ from the conventional composites in which P3HT and CdSe QDs were physically mixed. Solid-state emission spectra of nanocomposites suggested the charge transfer from P3HT to CdSe QDs, while the energy transfer from 3.5 nm CdSe QD to P3HT was implicated in the P3HT/CdSe composites. A faster decay in lifetime further confirmed the occurrence of charge transfer in P3HT-CdSe nanocomposites.     

Aggregated CdS quantum dots: Host of biomolecular ligands

In this contribution, we have studied structural and photophysical properties of aggregated CdS quantum dots (QDs) capped with 2-mercaptoethanol in aqueous medium. The hydrodynamic diameter of the nanostructures in aqueous solution was found to be approximately 160 nm with the dynamic light scattering (DLS) technique, which is in close agreement with atomic force microscopy (AFM) studies (diameter approximately 150 nm). However, the UV-vis absorption spectroscopy, powder X-ray diffraction (XRD), and transmission electron microscopy (TEM) studies confirm the average particle size (QD) in the nanoaggregate to be 4.0 +/- 0.5 nm. The steady-state and time-resolved photoluminescence studies on the QDs further confirm preservation of electronic band structure of the QDs in the nanoaggregate. To study the nature of the nanoaggregate we have used small fluorescent probes, which are widely used as biomolecular ligands (2,6-p-toluidinonaphthalene sulfonate (TNS) and Oxazine 1), and found the pores of the aggregate to be hydrophobic in nature. The significantly large spectral overlap of the host quantum dots (donor) with that of the guest fluorescent probe Oxazine 1 (acceptor) allows us to carry out F?rster resonance energy transfer (FRET) studies to estimate average donor-acceptor distance in the nanostructure, found to be approximately 25 Angstrom. The quantum dot aggregate and the characterization techniques reported here could have implications in the future application of the QD-nanoaggregate as host of small ligand molecules of biological interest.     

Stamping transfer of a quantum dot interlayer for organic photovoltaic cells

An organophilic cadmium selenide (CdSe) quantum dot (QD) interlayer was prepared on the active layer in organic solar cells by a stamping transfer method. The mother substrate composed of a UV-cured film on a polycarbonate film with strong solvent resistance makes it possible to spin-coat QDs on it and dry transfer onto an active layer without damaging the active layer. The QD interlayers have been optimized by controlling the concentration of the QD solution. The coverage of QD particles on the active layer was verified by TEM analysis and fluorescence images. After insertion of the QD interlayer between the active layer and metal cathode, the photovoltaic performances of the organic solar cell were clearly enhanced. By ultraviolet photoelectron spectroscopy of CdSe QDs, it can be anticipated that the CdSe QD interlayer reduces charge recombination by blocking the holes moving to the cathode from the active layer and facilitating efficient collection of the electrons from the active layer to the cathode.     

Exciton spin relaxation in colloidal CdSe quantum dots at room temperature

Size dependence of spin dynamics in colloidal CdSe quantum dots (QDs) are investigated with circularly polarized pump-probe transmission spectroscopy at room temperature. The excitation energy is tuned to resonance with the lowest exciton (1S(h)1S(e)) energy of the CdSe QDs. The exciton spin dynamics of CdSe QD with the diameter of 5.2 nm shows monoexponential decay with a typical time constant of about 1-3 ps depending on the excitation energy. For the cases of CdSe QDs with smaller size (with the diameter of 4.0 and 2.4 nm), the exciton spin relaxation shows biexponential decay, a fast component with time constant of several ps and a slow one with time constant of hundreds of ps to nanosecond time scale. The fast spin relaxation arises from the bright-dark transition, i.e., J = ±1 ? -/+2 transition. This process is dominated by the hole spin flips, while the electron spin conserves. The slow spin relaxation is attributed to the intralevel exciton transitions (J = ±1 ? -/+1 transition), which is relevant to the electron spin flip. Our results indicate that the exciton spin relaxation pathways in CdSe QD are controllable by monitoring the particle size, and polarized pump-probe spectroscopy is proved to be a sensitive method to probe the exciton transition among the fine structures.     

Single quantum dot-micelles coated with silica shell as potentially non-cytotoxic fluorescent cell tracers

The present study describes a stabilization of single quantum dot (QD) micelles by hydrophobic silica precursors and an extension of the silica layer to form a silica shell around the micelle. The obtained product consists of up to 92% of single nanocrystals (CdSe, CdSe/ZnS, or CdSe/ZnSe/ZnS quantum dots) in the silica micelles, coated with silica shell. The thickness of silica shell could vary, starting from 3 to 4 nm. Increasing the shell thickness increases the photoluminescent characteristics of QDs in aqueous solution. The silica-shelled single CdSe/ZnS QD micelles possess a high quantum yield in aqueous solution, a controlled small size, sharp photoluminescence spectra (fwhm approximately 30 nm), an absence of aggregation, and a high transparency. The presence of a hydrophobic layer between the QD and silica shell ensures an incorporation of other hydrophobic molecules (with interesting properties) in the close proximity of nanocrystal. Thus, it is possible to combine the characteristics of hybrid material with the priority of small size. The nanoparticles are amino functionalized and ready for conjugation. A comparatively good biocompatibility is demonstrated. The nanoparticles show ability for intracellular delivery and are noncytotoxic during long-term incubation with viable cells in the absence of light exposure, which makes them appropriate for cell tracing and drug delivery.     

Interaction of Globular Plasma Proteins with Water‐Soluble CdSe Quantum Dots

The interactions between water‐soluble semiconductor quantum dots [hydrophilic 3‐mercaptopropionic acid (MPA)‐coated CdSe] and three globular plasma proteins, namely, bovine serum albumin (BSA), β‐lactoglobulin (β‐Lg) and human serum albumin (HSA), are investigated. Acidic residues of protein molecules form electrostatic interactions with these quantum dots (QDs). To determine the stoichiometry of proteins bound to QDs, we used dynamic light scattering (DLS) and zeta potential techniques. Fluorescence resonance energy transfer (FRET) experiments revealed energy transfer from tryptophan residues in the proteins to the QD particles. Quenching of the intrinsic fluorescence of protein molecules was noticed during this binding process (hierarchy HSA<β‐Lg <BSA, lower binding affinity for hydrophobic protein molecules). Upon binding with QD particles, the protein molecules underwent substantial conformational changes at the secondary‐structure level (50 % helicity lost), due to loss in hydration.     

The electrochemical behavior of core-shell CdSe/CdS magic-sized quantum dots linked to cyclodextrin for studies of the encapsulation of bioactive compounds

Semiconductor nanocrystal quantum dots have been the subject of extensive investigations in different areas of science and technology in the past years. In particular, there are few studies of magic-sized quantum dots (MSQDs), even though they exhibit features such as extremely small size, fluorescence quantum efficiency, molar absorptivity greater than traditional QDs, and highly stable luminescence in HeLa cell cultures, thereby enabling monitoring of biological or chemical processes. The present study investigated the electrochemical behavior of free CdSe/CdS MSQDs using glassy carbon electrode and CdSe/CdS MSQDs immobilized on a gold electrode modified with a self-assembled cyclodextrin monolayer. The MSQDs showed two peaks in aprotic medium. The functionalized film modifier was prepared and characterized by means of cyclic voltammetry and electrochemical impedance spectroscopy using ferricyanide ions as a redox probe. The prepared modified electrode exhibited a stable behavior. The proposed method was successfully applied to encapsulation studies of mangiferin, a natural antioxidant compound, and cyclodextrin associated with the quantum dot, and the response was compared with that of the modified electrode without QD. The fluorescence study revealed that CdSe/CdS quantum dots emit blue light when excited by an optical source of wavelength of 350 nm and a significant increase in fluorescence and absorbance intensity is observed from the core-shell CdSe/CdS MSQDs when quantities of mangiferin are added to the solution containing thiolated cyclodextrin. CdSe/CdS MSQDs are optically and electrochemically sensitive and can be used for the detection and interaction of compounds encapsulated in cyclodextrin.     

The interaction between some diamines and CdSe quantum dots

The interaction of some diamines (ethylenediamine (EDA), 1,6-hexanediamine (HDA), o-phenylenediamine (OPD)) with CdSe quantum dots (QDs) is reported. With increasing concentration of EDA from 0 to 2.0 x 10(-6) mol l(-1), slight fluorescence enhancement is observed. However, the CdSe QDs fluorescence quenching is seen at relatively higher concentration of EDA. There is a red-shift of 0-7 nm in fluorescence emission spectra of CdSe QDs when the concentration of EDA is changed from 2.0 x 10(-6) to 8.0 x 10(-6) mol l(-1). The resonance light scattering (RLS) spectra of CdSe QDs have little change when the concentration of EDA is less than 5.0 x 10(-6) mol l(-1). It indicates there are little large particles formed in the solution. However, a significant increase of the RLS is observed in the 300-500 nm wavelength range after adding higher concentration than 5.0 x 10(-6) mol l(-1) EDA, which could be attributed to the large particles formed. The interaction between HDA and CdSe QDs is similar to that of EDA. However, with the OPD, it is found that the interaction is much different from those of EDA, HDA, and that the quenching, even at low concentration, is effective for CdSe QDs emission. The quenching phenomenon could be explained by a surface bound complexation equilibrium model.     

Surface effects on quantum dot-based energy transfer

CdSe quantum dot (QD)-phthalocyanine (Pc) conjugates were prepared as energy transfer donor-acceptor pairs, and the efficiency of the energy transfer process in this system was investigated as a function of QD size and under different surface chemistry conditions. The kinetics and efficiency of the energy transfer process were studied by femtosecond time-resolved laser spectroscopy. We observed that the energy transfer efficiency does not follow a linear dependence on spectral overlap integrals as predicted by the F?rster theory for molecules. This observation is found to be due to the involvement of QD surface states in the energy transfer process from the photoexcited QDs to the molecular energy acceptor.     

Hot‐Hole Extraction from Quantum Dot to Molecular Adsorbate

Ultrafast thermalized and hot‐hole‐transfer processes have been investigated in CdSe quantum dot (QD)/catechol composite systems in which hole transfer from photoexcited QDs to the catechols is thermodynamically favorable. A series of catechol derivatives were selected with different electron‐donating and ‐withdrawing groups, and the effect of these groups on hole transfer and charge recombination (CR) dynamics has been investigated. The hole‐transfer time was determined using the fluorescence upconversion technique and found to be 2–10 ps depending on the molecular structure of the catechol derivatives. The hot‐hole‐transfer process was followed after monitoring 2S luminescence of CdSe QDs. Interestingly, hot‐hole extraction was observed only in the CdSe/3‐methoxycatechol (3‐OCH₃) composite system owing to the higher electron‐donating property of the 3‐methoxy group. To confirm the extraction of the hot hole and to monitor the CR reaction in CdSe QD/catechol composite systems, ultrafast transient absorption studies have been carried out. Ultrafast transient‐absorption studies show that the bleach recovery kinetics of CdSe QD at the 2S excitonic position is much faster in the presence of 3‐OCH₃. This faster bleach recovery at the 2S position in CdSe/3‐OCH₃ suggests hot‐hole transfer from CdSe QD to 3‐OCH₃. CR dynamics in CdSe QD/catechol composite systems was followed by monitoring the excitonic bleach at the 1S position and was found to decrease with free energy of the CR reaction.     

Characterization of primary amine capped CdSe, ZnSe, and ZnS quantum dots by FT-IR: determination of surface bonding interaction and identification of selective desorption

Surface ligands of semiconductor quantum dots (QDs) critically influence their properties and functionalities. It is of strong interest to understand the structural characteristics of surface ligands and how they interact with the QDs. Three quantum dot (QD) systems (CdSe, ZnSe, and ZnS) with primary aliphatic amine capping ligands were characterized primarily by FT-IR spectroscopy as well as NMR, UV-vis, and fluorescence spectroscopy, and by transmission electron microscopy (TEM). Representative primary amines ranging from 8 to 16 carbons were examined in the vapor phase, KBr pellet, and neat and were compared to the QD samples. The strongest hydrogen-bonding effects of the adsorbed ligands were observed in CdSe QDs with the weakest observed in ZnS QDs. There was an observed splitting of the N-H scissoring mode from 1610 cm(-1) in the neat sample to 1544 and 1635 cm(-1) when bound to CdSe QDs, which had the largest splitting of this type. The splitting is attributed to amine ligands bound to either Cd or Se surface sites, respectively. The effect of exposure of the QDs dispersed in nonpolar medium to methanol as a crashing agent was also examined. In the CdSe system, the Cd-bound scissoring mode disappeared, possibly due to methanol replacing surface cadmium sites. The opposite was observed for ZnSe QDs, in which the Se-bound scissoring mode disappeared. It was concluded that surface coverage and ligand bonding partners could be characterized by FT-IR and that selective removal of surface ligands could be achieved through introduction of competitive binding interactions at the surface.     

Bio serves nano: biological light-harvesting complex as energy donor for semiconductor quantum dots

Light-harvesting complex (LHCII) of the photosynthetic apparatus in plants is attached to type-II core-shell CdTe/CdSe/ZnS nanocrystals (quantum dots, QD) exhibiting an absorption band at 710 nm and carrying a dihydrolipoic acid coating for water solubility. LHCII stays functional upon binding to the QD surface and enhances the light utilization of the QDs significantly, similar to its light-harvesting function in photosynthesis. Electronic excitation energy transfer of about 50% efficiency is shown by donor (LHCII) fluorescence quenching as well as sensitized acceptor (QD) emission and corroborated by time-resolved fluorescence measurements. The energy transfer efficiency is commensurable with the expected efficiency calculated according to F?rster theory on the basis of the estimated donor-acceptor separation. Light harvesting is particularly efficient in the red spectral domain where QD absorption is relatively low. Excitation over the entire visible spectrum is further improved by complementing the biological pigments in LHCII with a dye attached to the apoprotein; the dye has been chosen to absorb in the "green gap" of the LHCII absorption spectrum and transfers its excitation energy ultimately to QD. This is the first report of a biological light-harvesting complex serving an inorganic semiconductor nanocrystal. Due to the charge separation between the core and the shell in type-II QDs the presented LHCII-QD hybrid complexes are potentially interesting for sensitized charge-transfer and photovoltaic applications.     

Interaction between water-soluble peptidic CdSe/ZnS nanocrystals and membranes: formation of hybrid vesicles and condensed lamellar phases

Due to their tunable optical properties and their well-defined nanometric size, core/shell nanocrystals (quantum dots, QDs) are extensively used for the design of biomarkers as well as for the preparation of nanostructured hybrid materials. It is thus of great interest to understand their interaction with soft lipidic membranes. Here we present the synthesis of water-soluble peptide CdSe/ZnS QDs and their interaction with the fluid lipidic membrane of vesicles. The use of short peptides results in the formation of small QDs presenting both high fluorescence quantum yield and high colloidal stability as well as a mean hydrodynamical diameter of 10 nm. Their interaction with oppositely charged vesicles of various surface charge and size results in the formation of hybrid giant or large unilamellar vesicles covered with a densely packed layer of QDs without any vesicle rupture, as demonstrated by fluorescence resonance energy transfer experiments, zetametry, and optical microscopy. The adhesion of nanocrystals onto the vesicle membrane appears to be sterically limited and induces the reversion of the surface charge of the vesicles. Therefore, their interaction with small unilamellar vesicles induces the formation of a well-defined lamellar hybrid condensed phase in which the QDs are densely packed in the plane of the layers, as shown by freeze-fracture electron microscopy and small-angle X-ray scattering. In this structure, strong undulations of the bilayer maximize the electrostatic interaction between the QDs and the bilayers, as previously observed in the case of DNA polyelectrolytes interacting with small vesicles.     

Intermittent electron transfer activity from single CdSe/ZnS quantum dots

Electron transfer activity from excited single CdSe/ZnS core/shell quantum dots (QDs) to adsorbed Fluorescein 27 was studied by single QD fluorescence spectroscopy. In comparison with QDs, the QD-acceptor complexes showed a shorter average and broader distribution of QD emission lifetimes due to electron transfer to adsorbates. Large fluctuation of lifetimes in single QD/dye complexes was observed, indicating intermittent electron transfer activity from QDs.     

Single molecular stamping of a sub-10-nm colloidal quantum dot array

We introduce a nanoscale stamping technique of sub-10-nm colloidal quantum dot (QD) arrays to highly localized areas of three-dimensional nanostructures using a quartz tuning fork employed as the stamp pad (the "Nano Stamp"). CdSe/ZnS core-shell nanoparticles with diameters of 9.8 nm were deposited on microfabricated silicon probe tips. The number of transferred QDs, which ranged from several thousands down to single molecular order (less than 10), was precisely controlled by adjusting the stamping depths and angles. The stamping areas were varied from 1.2 microm x 1.2 microm down to 30 nm x 30 nm. Using the Nano Stamp, QDs can be transferred to a variety of protruding nanostructures. The amount of particles transferred to the tip was assessed by fluorescence intensity measurements, and the number of particles was estimated by direct transmission electron microscopy (TEM) observation. Correlation between the fluorescence intensity and the observed stamping depth and the approaching angle of the tip was found, demonstrating the efficacy of our Nano Stamp technique.     

Synthesis of quantum dot-tagged submicrometer polystyrene particles by miniemulsion polymerization

Submicrometer fluorescent polystyrene (PS) particles have been synthesized via miniemulsion polymerization using CdSe/ZnS core-shell quantum dots (QDs). The influence of QD concentration, QD coating (either trioctylphosphine oxide (TOPO)-coated or vinyl-functionalized), and surfactant concentration on the polymerization kinetics and the photoluminescence properties of the prepared particles has been analyzed. Polymerization kinetics were not altered by the presence of QDs, whatever their surface coating. Latexes exhibited particle sizes ranging from 100 to 350 nm, depending on surfactant concentration, and a narrow particle size distribution was obtained in all cases. The fluorescence signal of the particles increased with the number of incorporated TOPO-coated QDs. The slight red shift of the emission maximum was correlated with phase separation between PS and QDs, which occurred during the polymerization, locating the QDs in the vicinity of the particle/water interface. QD-tagged particles displayed higher fluorescence intensity with TOPO-coated QDs compared to those with the vinyl moiety. The obtained fluorescent particles open up new opportunities for a variety of applications in biotechnology.     

CdSe quantum dot-dispersed DOBAMBC: an electro-optical study

Cadmium selenide quantum dot (CdSe QD) has been used as a dopant in ferroelectric liquid crystal (FLC) 2-methylbutyl 4-(4-decyloxybenzylideneamino) cinnamate (DOBAMBC). Effect of CdSe QD in DOBAMBC on its different electro-optical (E-O) properties has been studied in the SmC* phase. The optical micrographs recorded for the pure and composite material are showing good dispersion of QDs in the FLC matrix. Micrographs of unaligned sample cell revealed that CdSe QDs induce homeotropic alignment of FLC molecules. An appreciable change in the value of E-O parameters like tilt angle, spontaneous polarisation and response time with shifting of SmA–SmC* phase transition temperature has been observed for CdSe QD–DOBAMBC composite. The observed properties of composite system have been discussed on the basis of surface properties of QDs in FLC system.     

Continuous‐Flow Synthesis of CdSe Quantum Dots: A Size‐Tunable and Scalable Approach

In recent years, continuous‐flow/microreactor processing for the preparation of colloidal nanocrystals has received considerable attention. The intrinsic advantages of microfluidic reactors have opened new opportunities for the size‐controlled synthesis of nanocrystals either in the laboratory or on a large scale. Herein, an experimentally simple protocol for the size‐tunable continuous‐flow synthesis of rather monodisperse CdSe quantum dots (QDs) is presented. CdSe QDs are manufactured by using cadmium oleate as cadmium source, selenium dioxide as selenium precursor, and 1‐octadecene as solvent. Exploiting selenium dioxide as selenium source and 1‐octadecene as solvent allows execution of the complete process in open air without any requirement for air‐free manipulations using a glove box or Schlenk line. Continuous‐flow processing is performed with a stainless steel coil of 1.0 mm inner diameter pumping the combined precursor solution through the reactor by applying a standard HPLC pump. The effect of different reaction parameters, such as temperature, residence time, and flow rate, on the properties of the resulting CdSe QDs was investigated. A temperature increase from 240 to 260 °C or an extension of the residence time from 2 to 20 min affords larger nanocrystals (range 3–6 nm) whereas the size distribution does not change significantly. Longer reaction times and higher temperatures result in QDs with lower quantum yields (range 11–28 %). The quality of the synthesized CdSe QDs was confirmed by UV/Vis and photoluminescence spectroscopy, small‐angle X‐ray scattering, and high‐resolution transmission electron microscopy. Finally, the potential of this protocol for large‐scale manufacturing was evaluated and by operating the continuous‐flow process for 87 min it was possible to produce 167 mg of CdSe QDs (with a mean diameter of 4 nm) with a quantum yield of 28 %.