聚丙烯酸功能化多壁碳纳米管

Covalent functionalization of multiwalled carbon nanotubes （MWNT） with poly（acrylic acid） has been successfully achieved via grafting of poly（acryloyl chloride） on nanotube surface by esterification reaction of acyl chloride-bound polymer with hydroxyl functional groups present on acid-oxidized MWNT and hydrolysis of polymer attached to nanotubes. Polymer-functionalized MWNT could possess remarkably high solubility in water, and their aqueous solution was very stable without any observable black deposit for a long time. Characterizations of such functionalized MWNT samples using Fourier transform infrared spectrometer, transmission electron microscopy and nuclear magnetic resonance techniques indicated that poly（acrylic acid） was covalently attached to the surface of MWNT.     

Preparation and characterization of multilayered polymer nanotube dispersions

Despite considerable efforts to synthesize nanotubes using porous alumina or polycarbonate membrane templates, few studies have addressed the resulting nanotube dispersion. We prepared dispersions of multilayered polyethylenimine/maleic anhydride alternating copolymer (PEI/MAAC) nanotubes synthesized with porous alumina templates. After mechanical polishing to remove the residual polymer surface layer from templates and subsequent template dissolution, the multilayered PEI/MAAC nanotubes were easily dispersed in water at neutral pH by polyelectrolyte adsorption, producing nanotube dispersions that were stable for at least 3 months. We characterized the dispersions using phase-contrast optical microscopy, electro-optics, electrophoresis, and viscometry to help understand their colloidal properties in the dilute and semidilute regimes. The dispersions were resistant to salt-induced aggregation up to at least 1 mM NaCl and were optically anisotropic when subjected to an electric field or flow. Interestingly, the electrophoretic mobility of polystyrene sulfonate (PSS)-stabilized nanotubes increases with increasing ionic strength, because of the high surface charge and softness of the adsorbed polyelectrolyte. Furthermore, unlike many rod-like colloid systems, the polymer nanotube dispersion has low viscosity because of weak rotary Brownian motions and strong tendency to shear thinning. At the high shear rates achieved in capillary viscometry experiments, however, we observed a slight shear thickening, which can be attributed to transient hydrocluster formation.     

Highly dispersed Pt nanoparticles immobilised on 3-amino-silane-modified MWNT materials for methanol oxidation

We demonstrate the use of molecular monolayers to enhance the nucleation of electrocatalytically active platinum nanocrystals onto carbon nanotubes. The multiwalled carbon nanotube (MWNT) is embedded within the polysiloxane shell with large amounts of hydrophilic amino groups outside after the siloxane is polymerized on the nanotube surfaces. Subsequent deposition of platinum nanoparticles led to high densities of 2- to 5-nm diameter Pt nanocrystals uniformly deposited along the length of the carbon nanotubes. The structure and nature of the resulting Pt/Si–MWNT composites were characterized by transmission electron microscopy and X-ray diffraction. Electrochemical measurements show that the molecular monolayers do not impede redox behavior of the electrode, and measurements of the electrocatalytic oxidation of methanol show very high catalytic efficiency.     

Debundling of single-walled nanotubes by dilution: observation of large populations of individual nanotubes in amide solvent dispersions

Large-scale debundling of single-walled nanotubes has been demonstrated by dilution of nanotube dispersions in the solvent N-methyl-2-pyrrolidone (NMP). At high concentrations some very large (approximately 100 s of micrometers) nanotube aggregates exist that can be removed by mild centrifugation. By measurement of the absorbance before and after centrifugation as a function of concentration the relative aggregate and dispersed nanotube concentrations can be monitored. No aggregates are observed below CNT approximately 0.02 mg/mL, suggesting that this can be considered the nanotube dispersion limit in NMP. After centrifugation, the dispersions are stable against sedimentation and further aggregation for a period of weeks at least. Atomic force microscopy (AFM) studies on deposited films reveal that the bundle diameter distribution decreases dramatically as concentration is decreased. Detailed data analysis suggests the presence of an equilibrium bundle number density and that the dispersions self-arrange themselves to always remain close to the dilute/semidilute boundary. A population of individual nanotubes is always observed that increases with decreasing concentration until almost 70% of all dispersed objects are individual nanotubes at a concentration of 0.004 mg/mL. The number density of individual nanotubes peaks at a concentration of approximately 10(-2) mg/mL. Both the mass fraction and the partial concentration of individual nanotubes can also be measured and behave in similar fashion. Comparison of the number density and partial concentration also of individual nanotubes reveals that the individual nanotubes have average molar masses of approximately 700,000 g/mol. The presence of individual nanotubes in NMP dispersion was confirmed by photoluminescence spectroscopy. Concentration dependence of the photoluminescence intensity confirms that the AFM measurements reflect the diameter distributions in situ. In addition, Raman spectroscopy confirms the presence of large quantities of individual nanotubes in the deposited films. Finally, the nature of the solvent properties required for dispersion are discussed.     

Interactions of carbon nanotubes with pyrene‐functionalized linear‐dendritic hybrid polymers

A series of linear‐dendritic hybrid polymers, containing pyrene units at the periphery of aliphatic polyester dendrons, were prepared for the purpose of dispersing shortened single‐walled carbon nanotubes (SWNTs) in tetrahydrofuran (THF). The prepared hybrids contained 1, 2, 4, 8, or 16 (G0 through G4) pyrene units and a linear segment composed of polystyrene. It was found that a minimum of four pyrene units was necessary to form a strong enough interaction with SWNTs to enable steric stabilization in solution, when using a linear polymer segment of 11.5 kDa. Increasing either the number of pyrene units per polymer chain or the length of the polymer segment to 18.0 kDa did not improve nanotube solubility, whereas decreasing the polymer length resulted in significantly less effective nanotube dissolution. The G4 dendron alone, without the linear polystyrene segment, was also found to impart solubility to the nanotubes in THF. Interactions between the series of linear‐dendritic hybrids and full‐length multiwalled carbon nanotubes were also investigated, and it was found that the polymers exhibited strong interactions with the multiwalled carbon nanotube surface, resulting in the formation of stable solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1016–1028, 2010     

Aqueous dispersions of single-wall and multiwall carbon nanotubes with designed amphiphilic polycations

Poor solubility of single-walled and multiwalled carbon nanotubes (NTs) in water and organic solvents presents a considerable challenge for their purification and applications. Macromolecules can be convenient solubilizing agents for NTs and a structural element of composite materials for them. Several block copolymers with different chemical functionalities of the side groups were tested for the preparation of aqueous NT dispersions. Poly(N-cetyl-4-vinylpyridinium bromide-co-N-ethyl-4-vinylpyridinium bromide-co-4-vinylpyridine) was found to form exceptionally stable NT dispersions. It is suggested that the efficiency of macromolecular dispersion agents for NT solubilization correlates with the topological and electronic similarity of polymer-NT and NT-NT interactions in the nanotube bundles. Raman spectroscopy and atomic force and transmission electron microcopies data indicate that the polycations are wrapped around NTs forming a uniform coating 1.0-1.5 nm thick. The ability to wind around the NT originates in the hydrophobic attraction of the polymer backbone to the graphene surface and topological matching. Tetraalkylammonium functional groups in the side chains of the macromolecule create a cloud of positive charge around NTs, which makes them hydrophilic. The prepared dispersions could facilitate the processing of the nanotubes into composites with high nanotube loading for electronic materials and sensing. Positive charge on their surface is particularly important for biological and biomedical applications because it strengthens interactions with negatively charged cell membranes. A high degree of spontaneous bundle separation afforded by the polymer coating can also be beneficial for NT sorting.     

Applications of cationic gemini surfactant in preparing multi-walled carbon nanotube contained nanofluids

Stable homogeneous nanofluids of multi-walled carbon nanotubes (MWNTs) were prepared by using gemini cationic surfactant trimethylene-1,3-bis (dodecyldimethyl ammonium bromide), abbreviated as 12-3-12,2Br⁻¹, as dispersing agents. Zeta potential and FT-IR measurements were employed to investigate the adsorption mechanism of 12-3-12,2Br⁻¹ on MWNTs. The interactions between MWNTs and 12-3-12,2Br⁻¹ through hydrophobic segments cause hydrophilic MWNT-suspended medium interfaces with high positive charges, which enables the nanofluids to be stable for long periods. At relatively low temperatures the superfluous surfactant molecules form stable layer or column micelles, making an increase in the viscosity of nanofluids. Only 0.6 wt% gemini surfactant was used to obtain 0.5 wt% MWNT dispersions. The dispersions show no MWNTs precipitation for at least 5 weeks.     

非离子表面活性剂对多壁碳纳米管在乙醇中高浓度分散的作用

如果能在无需聚合物或共价官能团辅助的条件下, 将多壁碳纳米管(MWNTs)高浓度地分散在乙醇中, 那么向各种复合材料引入MWNTs的过程就会更加便捷. 为此, 制备了多种含有表面活性剂的多壁碳纳米管乙醇悬浮液并对比考查了它们的稳定性. 非离子表面活性剂Triton X-100 和Tween 65显示出了在乙醇中分散悬浮高浓度MWNTs的能力, 能够使1.0 g·L-1 MWNTs乙醇悬浮液的上层清液经240 h后浓度仍分别在0.50和0.35 g·L-1以上. 这样长时间稳定的、没有聚合物或共价官能团辅助的MWNTs乙醇悬浮液, 其浓度比文献报道的值高. 进一步探讨了这些非离子表面活性剂分子结构对于分散MWNTs的优势, 并直观给出了其吸附于碳纳米管表面的可能形式. X射线光电子能谱和透射电子显微镜的表征结果都证实了表面活性剂分子吸附于碳纳米管表面.     

功能化多壁碳纳米管的光电性质

表面光电压谱;循环伏安;金刚石薄膜电极;功能化多壁碳纳米管的光电性质     

A study of the stability of aqueous suspensions of functionalized carbon nanotubes

The properties of aqueous suspensions of carbon nanotubes have been studied as depending on the conditions of their functionalization in a mixture of sulfuric and nitric acids. The elemental composition and contents of carboxyl, lactone, and hydroxyl groups in carbon nanotubes have been determined at different durations and temperatures of functionalization. The influence of functionalization conditions on the value of the electrokinetic potential of carbon nanotubes in aqueous suspensions and the nanotube solubility in water has been investigated. It has been found that the absolute value of the electrokinetic potential of nanotubes and their solubility in water increase with both the duration and temperature of functionalization due to a rise in the number of functional groups on their surface. The optimal regimes of functionalization of carbon nanotubes have been determined from the point of view of preserving their structure and stability in aqueous dispersions.     

Melt mixing of polycarbonate with multiwalled carbon nanotubes: microscopic studies on the state of dispersion

The focus of the paper is to investigate several issues related to the state of dispersion of multiwalled carbon nanotubes (MWNTs) in a polycarbonate (PC) matrix. A masterbatch of PC-MWNT (15 wt.%) was diluted with different amounts of PC in a small scale conical twin screw extruder (DACA Micro Compounder) to obtain different compositions of MWNT. In this system, electrical measurements indicated percolation of MWNT between 1.0 and 1.5 wt.%. We report TEM and AFM investigations of the state of dispersion of MWNT, in the entire volume of the matrix, in selected composites with compositions below (1 wt.% MWNT) and above the percolation threshold (2 and 5 wt.% MWNT). In addition, it was investigated if surface segregation of MWNT and flow induced orientation of nanotubes within the extruded strands had been occurred. It is found that the nanotubes dispersed uniformly through the matrix showing no significant agglomeration in the compositions studied. TEM micrographs seem to be able to detect the percolated structure of the carbon nanotubes. Furthermore, by comparing AFM micrographs from the core region and near to surface region no evidence of segregation or depletion of MWNT at the surface of the extruded strand was found. Comparison of TEM and AFM micrographs on surfaces cut along and perpendicular to the strand direction led to the conclusion that no preferred alignment had occurred as a result of extrusion. Aside from TEM technique, AFM is shown to be suitable to characterize the state of nanotube dispersion along with the issue of surface segregation and orientation of the nanotubes.     

Synthesis and characterization of carbon nanotube/polypyrrole core–shell nanocomposites via in situ inverse microemulsion

We demonstrate here a feasible approach to the preparation of multiwalled carbon nanotube (MWNT)/polypyrrole (PPy) core–shell nanowires by in situ inverse microemulsion. Transmission electron microscopy and scanning electron microscopy showed that the carbon nanotubes were uniformly coated with a PPy layer with a thickness of several to several tens of nanometers, depending on the MWNT content. Fourier transform infrared spectra suggested that there was strong interaction between the π‐bonded surface of the carbon nanotubes and the conjugated structure of the PPy shell layer. The thermal stability and electrical conductivity of the MWNT/PPy composites were examined with thermogravimetric analysis and a conventional four‐probe method. In comparison with pure PPy, the decomposition temperature of the MWNT/PPy (1 wt % MWNT) composites increased from 305 to 335 °C, and the electrical conductivity of the MWNT/PPy (1 wt % MWNT) composites increased by 1 order of magnitude. The current–voltage curves of the MWNT/PPy nanocomposites followed Ohm's law, reflecting the metallic character of the MWNT/PPy nanocomposites. The cyclic voltammetry measurements revealed that PPy/MWNT composites showed an enhancement in the specific charge capacity with respect to that of pure PPy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6105–6115, 2005     

Understanding surfactant aided aqueous dispersion of multi-walled carbon nanotubes

Dispersions of multi-walled carbon nanotubes (MWNTs) assisted by surfactant adsorption were prepared for a number of ionic and non-ionic surfactants including sodium 4-dodecylbenzenesulfonate (NaDDBS), hexadecyl(trimethyl)azanium bromide (CTAB), sodium dodecane-1-sulfonate (SDS), Pluronic? F68, Pluronic? F127, and Triton? X-100 to examine the effects of nanotube diameter, surfactant concentration, and pH on nanotube dispersability. Nanotube diameter was found to be an important role in surfactant adsorption rendering single-walled carbon nanotube studies as unreliable in predicting MWNT dispersive behavior. Similar to other reports, increasing surfactant concentrations resulted in a solubility plateau. Quantification of nanotube solubility at these plateaus demonstrated that CTAB is the best surfactant for MWNTs at neutral pH conditions. Deviations from neutral pH demonstrated negligible influence on non-ionic surfactant adsorption. In contrast, both cationic and anionic surfactants were found to be poor dispersing aids for highly acidic solutions while, CTAB remained a good surfactant under strongly basic conditions. These pH dependent results were explained in the context of nanotube surface ionization and Debye length variation.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

Analysis of stability of nanotube dispersions using surface tension isotherms

In this paper, we present the analyses of surface tension of surfactant-stabilized dispersions of carbon nanotubes. This method allows one to study interactions of carbon nanotubes with surfactants at different levels of nanotube loading when optical methods fall short in quantifying the level of nanotube separation. Sodium dodecyl sulfate was used as a stabilizing agent to uniformly disperse single-walled carbon nanotubes in an aqueous media. We show that surface tension is very sensitive to small changes of nanotube and surfactant concentrations. The experimental data suggest that, at moderate concentrations, surfactant displaces carbon nanotubes from the air-water interface and the nanotubes are mostly moved into the bulk of the liquid. By analyzing the surface tension as a function of surfactant concentration, we obtained the dependence of critical micelle concentration on nanotube loading. We then constructed the adsorption isotherm for dodecyl sulfate on carbon nanotubes and bundles of carbon nanotubes. The results of these experiments enabled us to extend the phase diagram of the produced dispersions to a broader range of surfactant and nanotube concentrations.     

Synthesis and characterization of nickel catalysts supported on different carbon materials

Nickel catalysts supported on various carbon materials such as multiwall carbon nanotubes, shortened length carbon nanotubes, graphite and amorphous carbon were synthesized, characterized and tested in cyclohexene hydrogenation reaction. We have found that carbon nanotube supports are superior to graphite and amorphous carbon both in terms of catalytic activity and stability.     

Dispersing nanotubes with surfactants: a microscopic statistical mechanical analysis

A first theoretical study of surfactant-stabilized carbon nanotube dispersions is presented. Density functional theory is used to compute potential of mean force between nanotubes in an aqueous solution of cationic surfactant n-decyltrimethylammonium chloride. In agreement with experimental results, it is found that stable dispersions can be prepared for surfactant bulk concentrations below the critical micelle concentration. Computed density profiles of head and tail segments indicate that surfactants adsorb on nanotube surfaces in a random fashion rather than form cylindrical micelles, which is also in agreement with recent small-angle neutron scattering measurements.     

超支化聚对氯甲基苯乙烯修饰碳纳米管表面的研究

用原子转移自由基聚合(ATRP)与自缩合乙烯基聚合(SCVP)相结合合成超支化聚合物聚对氯甲基苯乙烯(PCMS),该聚合物每个分枝均以卤素原子封端. 用叠氮化反应将卤素原子转换为—N3. 通过—N3与单壁或复壁碳纳米管反应将超支化聚合物接到碳纳米管的表面上, 实现了碳纳米管的化学修饰. 通过FTIR, XPS, TEM和Raman光谱等证明PCMS是以共价键形式结合到碳纳米管表面上的. 利用TGA估算出碳纳米管表面的修饰密度, 证明用超支化结构大量的端基可反应的官能团可以改善聚合物对碳纳米管的修饰效果.     

碳纳米管尺寸对电化学反应活性的影响

制备不同尺寸的多壁碳纳米管(MWNT)修饰电极,应用循环伏安法研究了相同管径、不同管长和相同管长、不同管径的多壁碳纳米管修饰电极在K3Fe(CN)6溶液中的电化学行为及其对尿酸、多巴胺等生物分子的电催化作用,以及尺寸效应对碳纳米管修饰电极电化学活性的影响规律.结果显示,在同一条件下,短管的MWNT比长管的更能有效促进K3Fe(CN)6的电子传递,更有利于对生物分子的电催化;管径对它的电化学行为及生物电催化活性影响较小,无明显规律.主要原因在于碳纳米管管端、管壁的不同电化学活性.     

Acetylene Sorption Dynamics in Carbon Nanotubes

Single‐walled and multi‐walled carbon nanotubes (SWNT and MWNT, resp.) were prepared by applying the catalytic chemical vapor deposition (CCVD) technique. Different nanotube samples were obtained from the as‐synthesized carbon/catalyst composites by treatments applied to remove the catalyst and the amorphous carbon. The dynamic and equilibrium adsorption properties of the samples were compared. Acetylene was used as an adsorptive probe. The sorption mass‐transport properties have been characterized by applying the frequency response (FR) technique. Results reflected that the surface functional groups, generated by an oxidative treatment, have significant influence on both the static and the dynamic acetylene sorption properties of the carbon nanotube materials. The rate of acetylene mass transport was governed by the rate of sorption in all the samples, except in MWNT after oxidative treatment, where the intracrystalline diffusion in the nanotubes was the rate‐controlling process.