水溶性酞菁化合物对有机电致发光器件亮度和效率的影响

以水溶性酞菁铜(CuTcPc)为空穴注入层制备多层有机电致发光器件.ITO表面经过CuTcPc溶液修饰,能够提高空穴的注入能力,增加器件的电流密度和亮度.在有机电致发光器件中,空穴传输材料的空穴迁移率一般大于电子传输材料的电子迁移率,空穴是多数载流子;但是,CuTcPc修饰处理不仅提高了器件的电流密度和亮度,也提高了器...     

单晶金刚石氢终端场效应晶体管特性

基于微波等离子体化学气相淀积生长的单晶金刚石制作了栅长为2μm的耗尽型氢终端金刚石场效应晶体管,并对器件特性进行了分析.器件的饱和漏电流在栅压为-6 V时达到了96 mA/mm,但是在-6 V时栅泄漏电流过大.在-3.5 V的安全工作栅压下,饱和漏电流达到了77 mA/mm.在器件的饱和区,宽5.9 V的栅电压范围内,跨导随着栅电压的增加而近线性增大到30 mS/mm.通过对器件导通电阻和电容-电压特性的分析,氢终端单晶金刚石的二维空穴气浓度达到了1.99×10~(13)cm~(-2),并且迁移率和载流子浓度均随着栅压向正偏方向的移动而逐渐增大.分析认为,沟道中高密度的载流子、大的栅电容以及迁移率的逐渐增加是引起跨导在很大的栅压范围内近线性增加的原因.     

空间电荷限制电流法测量共混体系中空穴的迁移率

载流子迁移率测量是有机半导体材料与器件研究中的重要内容之一.以聚噻吩为电子给体材料, C₆₀的衍生物为电子受体材料,制备了一种单电荷传输器件.用空间电荷限制电流法测出了不同溶剂形成的 活性层及不同温度热处理后器件中空穴的迁移率.结果表明:器件中电荷的传输J-V曲线符合Mott-Gurney方程, 不同溶剂形成活性层中空穴具有不同的迁移率,高沸点的溶剂1, 2-二氯苯形成的活性层具有较高的空穴迁移率, 热处理有利于器件中空穴迁移率的提高.同时还进一步分析了空穴迁移率变化的原因.     

基于溶液加工小分子材料发光层的有机-无机复合发光器件

报道了基于溶液加工有机小分子材料发光层、聚乙烯亚胺电子注入层的有机-无机复合发光器件. 优化了空穴传输层和磷光染料的掺杂浓度, 得到最佳发光效率的器件. 蓝光、黄光和红光器件的最大外量子效率为17.3%, 10.7% 和7.3%. 在发光亮度为1000 cd/m² 时, 蓝光、黄光和红光器件的外量子效率分别为17.0%, 10.6% 和5.8%, 器件效率下降较小. 原因在于同时采用空穴传输型和电子传输型的小分子材料作为共同主体材料, 器件具有较宽的载流子复合区域, 降低了三线激发态-三线激发态湮灭和三线激发态-极化子相互作用对器件发光效率的影响. 白光器件在亮度为1000 cd/m²时, 发光效率和功率效率为31 cd/A和 14.8 lm/W. 器件的色度为(0.32, 0.42), 色度比较稳定, 随电流的变化微小. 器件的效率较以往报道的有机-无机复合发光器件有显著的提高, 主要归因于在聚乙烯亚胺上能够制备特性良好的小分子材料薄膜, 以及小分子主体材料拥有较高的三线态能量和平衡的载流子传输特性, 能够获得高效的磷光发射.     

基于电场调控的高性能紫外无机-有机复合结构光电探测器

通过溶液旋涂制备了结构为ITO/ZnO/P3HT:ITIC/Ag的紫外无机-有机复合结构光电探测器,混合膜中聚合物给体(P3HT)和非富勒烯小分子受体(ITIC)的质量比为100:1.由于载流子传输通道不连续,器件在零偏压下的暗电流密度很小,为5.8×10-10 A·cm-2,为器件实现外加电场可调和光电流倍增提供了条...     

基于有限元方法的有机场效应晶体管特性模拟与实验验证

采用有限元方法,借助多物理场软件COMSOL模拟了底栅顶接触结构有机场效应晶体管电位和载流子浓度随源漏电压Vds的变化。模拟结果表明,当固定栅压V_g=-10 V时,改变V_(ds)从0~-10 V,对于电位分布,从栅极到源漏电极竖直方向有渐进的变化,而从源极到漏极的水平方向呈现由大到小明显的梯度变化。对于载流子浓度,观察到沟道处从源极向漏极逐渐减少,在靠近漏极的区域减少得尤为明显,而当源漏电压等于栅极电压时,产生夹断现象。进一步将模拟结果与实际制备的器件性能进行了对比,模拟结果与实验数据所显示的分布趋势大体相同,印证了模拟的合理性。由此表明,采用模拟方法分析有机场效应晶体管的器件特性,对于实际制备器件具有重要的指导意义。     

Characterization of the hole transport and electrical properties in poly(9,9-dioctylfluorene)

A systematic study of the hole transport and electrical properties in blue-emitting polymers as poly(9,9-dioctylfluorene) (PFO) has been performed. We show that the temperature dependent and thickness dependent current density versus voltage characteristics of PFO hole-only devices can be accurately described using our recently introduced improved mobility model based on both the Arrhenius temperature dependence and non-Arrhenius temperature dependence. Within the improved model, the mobility depends on three important physical quantities: temperature, carrier density, and electric field. For the polymer studied, we find the width of the density of states σ=0.115 eV and the lattice constant a=1.2 nm. Furthermore, we show that the boundary carrier density has an important effect on the current density versus voltage characteristics. Too large or too small values of the boundary carrier density lead to incorrect current density versus voltage characteristics. The numerically calculated carrier density is a decreasing function of distance from the interface. The numerically calculated electric field is an increasing function of distance. Both the maximum of carrier density and minimum of electric field appear near the interface.     

Nanoscopically resolved dynamic charge‐carrier distribution in operating interband cascade lasers

Dynamic charge carriers play a vital role in active photonic quantum/nanodevices, such as electrically pumped semiconductor lasers. Here we present a systematic experimental study of gain‐providing charge‐carrier distribution in a lasing interband cascade laser. The unique charge‐carrier distribution profile in the quantum‐well active region is quantitatively measured at nanometer scales by using a noninvasive scanning voltage microscopy technique. Experimental results clearly confirm the accumulation and spatial segregation of holes and electrons in the beating heart of the device. The measurement also shows that the charge‐carrier density is essentially clamped in the presence of stimulated emission at low temperatures. The threshold charge‐carrier density exhibits a linear but fairly weak temperature dependence, in contrast to the exponential temperature dependence of the threshold current. The experimental approach will lead to a deeper understanding of fundamental processes that govern the operation and performance of nanoelectronic devices, quantum devices and optoelectronic devices.

     

Degradation of β-Ga_2O_3 Schottky barrier diode under swift heavy ion irradiation

The electrical characteristics and microstructures of β-Ga_2 O_3 Schottky barrier diode(SBD) devices irradiated with swift heavy ions(2096 Me V Ta ions) have been studied. It was found that β-Ga_2 O_3 SBD devices showed the reliability degradation after irradiation, including turn-on voltage Von, on-resistance Ron, ideality factor n, and the reverse leakage current density Jr. In addition, the carrier concentration of the drift layer was decreased significantly and the calculated carrier removal rates were 5 × 10~6–1.3 × 10~7 cm~(-1). Latent tracks induced by swift heavy ions were observed visually in the whole β-Ga_2 O_3 matrix. Furthermore, crystal structure of tracks was amorphized completely. The latent tracks induced by Ta ions bombardments were found to be the reason for the decrease in carrier mobility and carrier concentration. Eventually,these defects caused the degradation of electrical characteristics of the devices. In terms of the carrier removal rates, theβ-Ga_2 O_3 SBD devices were more sensitive to swift heavy ions irradiation than Si C and Ga N devices.     

载流子复合及能量无序对聚合物太阳电池开路电压的影响

聚合物太阳电池中载流子的复合与能量无序对器件的开路电压有着深刻的影响.本文同时研究了基于传统富勒烯(PC71BM)和非富勒烯(O-IDTBR)电子受体的聚合物太阳电池.通过交流阻抗谱、低温电流密度-电压谱、瞬态光电压以及电致发光光谱等手段重点研究了载流子复合及能量无序对电池器件开路电压的影响.具体地,交流阻抗谱和瞬态光电压测试结果表明,富勒烯体系载流子复合损失较为严重.电致发光光谱研究显示,PC71BM器件的发光峰随着注入电流的增加不断向短波长处移动,而O-IDTBR体系发光峰位置基本不变,该结果证明PC71BM体系中能量无序度更高.载流子复合严重及能量无序度更高共同作用导致了富勒烯器件开路电压的降低.     

Numerical investigations on the current conduction in bilayer organic light—emitting devices with ohmic injection of charge carriers

A numerical model for bilayer organic light-emitting diodes (OLEDs) has been developed on the basis of trappedcharge limited conduction. The dependences of the current density on the operation voltage, the thickness andtrap properties of the hole transport layer (HTL) and emission layer (EML) in bilayer OLEDs of the structure an-ode/HTL/EML/cathode have been numerically investigated. It has been found that, for given values of reduced trapdepth, total trap density, and carrier mobility of HTL and EML, there exists an optimum thickness ratio of HTL tothe sum of HTL and EML, by which a maximal current density, and hence maximal quantum efficiency and luminance,can be achieved. The current density decreases quickly with the mean trap density, and decreases nearly exponentiallywith the mean reduced trap depth.     

Synaptic behaviors and modeling of a metal oxide memristive device

Nanoscale memristive devices using tungsten oxide as the switching layer have been fabricated and characterized. The devices show the characteristics of a flux-controlled memristor such that the conductance change is governed by the history of the applied voltage signals, leading to synaptic behaviors including long-term potentiation and depression. The memristive behavior is attributed to the migration of oxygen vacancies upon bias which modulates the interplay between Schottky barrier emission and tunneling at the WO _X /electrode interface. A physical model incorporating ion drift and diffusion effects using an internal state variable representing the area of the conductive region has been proposed to explain the observed memristive behaviors. A SPICE model has been further developed that can be directly incorporated into existing circuit simulators. This type of device can be fabricated with low-temperature processes and has potential applications in synaptic computations and as analog circuit components.     

单层有机器件的电子传输特性的数值模拟

在漂移扩散模型的基础上建立了单层有机器件的模型,包括了电荷注入、传输、空间电荷效应和陷阱的影响.电荷注入考虑了热电子发射电流和隧道电流.模拟得到的结果和文献中报道的实验测试数据一致.模拟研究了各个因素对器件J-V曲线的影响,电流和器件长度成反比,电流随着空穴注入势垒的减小而增加.电子注入势垒从1.7 eV减少到0.5 eV时,电流随着电子注入势垒的减小而减小,这主要是因为有机材料中电子迁移率太小,电子注入电流的增加可以忽略,而电子注入势垒的减小使内建势增加,在同样的电压下,场强 关键词： 有机器件 传输特性 数值模拟     

Si/Ge/Si异质横向SPiN二极管固态等离子体解析模型

采用横向表面PiN(SPiN)二极管构造的硅基可重构天线具有众多优于传统天线的独特优势, 是实现天线小型化和提升雷达与微波通信系统性能的有效技术途径. 本文提出一种Si/Ge/Si异质横向SPiN二极管, 并基于双极扩散模型与Fletcher型边界条件, 在大注入条件下建立了二极管结电压、电流密度与本征区固态等离子体浓度分布解析模型, 并数值模拟分析了本征区长度、P⁺与N⁺区掺杂浓度、外加电压对所建模型的影响. 结果表明, 固态等离子体浓度随本征区长度的增加下降, 随外加电压的增加而指数上升, 随P⁺与N⁺区掺杂浓度的提高而上升, 电流密度随外加电压的增加而指数上升. 同等条件下, 异质SPiN二极管的固态等离子体浓度相比同质二极管提高近7倍以上. 本文所建模型为硅基可重构天线的设计与应用提供有效的参考.     

硅锗量子阱结构在硅异质结太阳电池中应用的数值模拟

利用半导体工艺和器件仿真软件silvaco TCAD(Technology Computer Aided Design),模拟研究了采用硅/硅锗合金(silicon/silicon germanium alloy,Si/Si_(1-x)Ge_x)量子阱结构作为吸收层的薄膜晶体硅异质结太阳电池各项性能.模拟结果显示,长波波段光学吸收随锗含量的增加而增加,而开路电压则因Si_(1-x)Ge_x)层带隙的降低而下降.锗含量为0.25时,短路电流密度的增加补偿了开路电压的衰减,效率提升0.2%.氢化非晶硅/晶体硅(a-Si:H/c-Si)界面空穴密度以及Si_(1-x)Ge_x)量子阱的体空穴载流子浓度制约着空穴费米能级的位置,进而影响到开路电压的大小.随着锗含量增加,a-Si:H/c-Si界面缺陷对开压的影响降低,Si_(1-x)Ge_x)量子阱的体缺陷对开压的影响则相应增加.高效率含Si_(1-x)Ge_x)量子阱结构的硅异质结太阳电池的制备需要a-Si:H/c-Si界面缺陷的良好钝化以及高质量Si_(1-x)Ge_x)量子阱的生长.     

PTCDI-C8作为阴极修饰层提高钙钛矿太阳能电池的性能

采用N,N'-二正辛烷基-3,4,9,10-苝四甲酰二亚胺（PTCDI-C₈）对钙钛矿电池电子传输层（PCBM）进行界面修饰以减少PCBM与Al电极之间的漏电流,提高阴极的电子收集效率。通过调节PTCDI-C₈薄膜的厚度优化界面接触和电子传输性能。实验结果表明：当PTCDI-C₈薄膜的厚度为20 nm时得到的器件性能最优。光电转换效率（PCE）由5.26%提高到了8.65%,开路电压（V_oc）为0.92 V,短路电流（J_sc）为15.68 mA/cm²,填充因子（FF）为60%。PTCDI-C₈能够有效阻挡空穴向阴极传输,同时PTCDI-C₈具有较高的电子迁移率以及较高的稳定性,在增加电子传输的同时,可减少环境对PCBM的侵蚀,提高了器件的稳定性。     

Influences of space charge and electrode on the electrical transport through (Ba,Sr)TiO3 thin film capacitors

The combined model of thermionic emission and carrier drift-diffusion is derived to simulate the electrical transport through BST thin film capacitors. In the model the field-dependent permittivity is obtained from the derivative of the polarization distinguished with the traditional characterization. The simulated currents show the hysteresis. The influences of space charges and electrode materials on the current density-applied voltage characteristics have been studied. The simulation results suggest that the current densities can be greatly influenced by the space charges at the cathode interface and the barrier height at the electrode/BST interface. It is expected that this work can provide some useful guidelines to the design and performance improvement of BST thin film capacitors and other BST thin film devices.     

高跨导氢终端多晶金刚石长沟道场效应晶体管特性研究

基于多晶金刚石制作了栅长为4 pm的铝栅氢终端金刚石场效应晶体管.器件的饱和漏源电流为160 mA/mm,导通电阻低达37.85Ω·mm,最大跨导达到32 mS/mm,且跨导高于最大值的90%的栅压(V_(GS))范围达到3 V(-2 V≤V_(GS)≤-5 V).通过传输线电阻分析以及器件的导通电阻和电容-电压特性分析,发现氢终端多晶金刚石栅下沟道中的空穴面浓度达到了1.56×10~(13)cm~(-2),有效迁移率在前述高跨导栅压范围保持在约170 cm~2/(V·s).分析认为,较低的栅源和栅漏串联电阻、沟道中高密度的载流子和在大范围栅压内的高水平迁移率是引起高而宽阔的跨导峰和低导通电阻的原因.     

Optical absorption enhancement in slanted silicon nanocone hole arrays for solar photovoltaics

We investigate slanted silicon nanocone hole arrays as light absorbing structures for solar photovoltaics via simulation.With only 1-μm equivalent thickness, a maximum short-circuit current density of 34.9 m A/cm~2 is obtained. Moreover, by adding an Ag mirror under the whole structure, a short-circuit current density of 37.9 m A/cm~2 is attained. It is understood that the optical absorption enhancement mainly results from three aspects. First, the silicon nanocone holes provide a highly efficient antireflection effect. Second, after breaking the geometric symmetry, the slanted silicon nanocone hole supports more resonant absorption modes than vertical structures. Third, the Fabry–Perot resonance enhances the light absorption after adding an Ag mirror.     

基于电压变化率的IGBT结温预测模型研究

基于半导体物理和IGBT基本结构,通过合理简化与理论推导,建立了电压变化率模型,对电压变化率的影响因素与温度特性进行了深入研究,得出电压变化率随电压或电流的增大,线性增大;随结温增大,线性减小.基于电压变化率模型,建立了IGBT电压变化率结温预测模型.仿真和实验结果验证了模型的正确性与准确性.对实现IGBT结温在线监测、提高IGBT模块及电力电子装置可靠性具有一定的理论意义和应用价值.