Composite Nanoarchitectonics with iron nickel bimetallic nanoparticles and carbon composite for efficient electrocatalysis in hydrogen evolution reaction

The poor efficiency and stability of cost-effective metal compounds are major hurdles to substitute expensive metal-based nanomaterials for the hydrogen evolution reaction (HER). As a result, new concepts and tactics for developing electrocatalysts based on earth-abundant elements must be developed. We present iron-nickel alloy nanoparticles that are supported with carbon (FeNi@C) to improve HER performance in alkaline conditions. FeNi particle was supported on Trimesic acid (TMA) based carbon. In particular, the high conductivity of the carbon and a large number of catalytically active sites in the FeNi demonstrated a synergistic effect, making the hybrid structure a good choice for HER catalyst. Moreover, the physicochemical interaction between the carbon and FeNi metal enhanced the electrocatalytic performance and resulted in achieving 10 mA/cm² current density at 190 mV overpotential with 15 h chronopotential cycling, proving the possibility for replacing costly Pt-based catalysts.     

Solvent effect in sonochemical synthesis of metal-alloy nanoparticles for use as electrocatalysts

Nanomaterials are now widely used in the fabrication of electrodes and electrocatalysts. Herein, we report a sonochemical study of the synthesis of molybdenum and palladium alloy nanomaterials supported on functionalized carbon material in various solvents: hexadecane, ethanol, ethylene glycol, polyethylene glycol (PEG 400) and Ionic liquids (ILs). The objective was to identify simple and more environmentally friendly design and fabrication methods for nanomaterial synthesis that are suitable as electrocatalysts in electrochemical applications. The particles size and distribution of nanomaterials were compared on two different carbons as supports: activated carbon and multiwall carbon nanotubes (MWCNTs). The results show that carbon materials functionalized with ILs in ethanol/deionized water mixture solvent produced smaller particles sizes (3.00 ± 0.05 nm) with uniform distribution while in PEG 400, functionalized materials produced 4.00 ± 1 nm sized particles with uneven distribution (range). In hexadecane solvents with Polyvinylpyrrolidone (PVP) as capping ligands, large particle sizes (14.00 ± 1 nm) were produced with wide particle size distribution. The metal alloy nanoparticles produced in ILs without any external reducing agent have potential to exhibit a higher catalytic activity due to smaller particle size and uniform distribution.     

Facile synthesis of Co-doped SnS2 as a pre-catalyst for efficient oxygen evolution reaction

Co-doped flower-like SnS₂ was synthesized using a one-step hydrothermal method. The Co content of Co-doped SnS₂ was facilely tuned by controlling the [Co]/[Sn] molar concentration ratio (SC-x; x = 0.05, 0.5, 1.0 2.0, where x indicates the [Co]/[Sn] ratio). The morphology of the samples did not significantly change despite changes in the Co dopant content. Compared to SC-0 (667 mV), SC-0.05 (400 mV), SC-0.5 (382 mV), and SC-1.0 (374 mV), SC-2.0 showed higher catalytic performance, with an overpotential of 323 mV at a current density of 10 mA/cm² in 1 M KOH solution. Moreover, SC-2.0 exhibited high stability for 12 h during chronopotentiometry. SC-2.0 was unexpectedly transformed to weakly crystallized CoOOH nanoparticles after the stability test. The transformation rate from Co-doped SnS₂ to CoOOH was decreased with an increase in the Co content.     

Laser ablation synthesis of indium oxide nanoparticles in water

Colloidal solutions of Indium oxide nanoparticles have been produced by means of laser ablation in liquids (LALs) technique by simply irradiating with a second harmonic (532 nm) Nd:YAG laser beam a metallic indium target immersed in distilled water and varying the laser fluence up to 10 J cm⁻² and the ablation time up to 120 min. At all the investigated fluences the vaporization process of the indium target is the dominant one. It produces a majority (>80%) of small size (<6 nm) nanoparticles, with a very limited content of larger ones (size between 10 and 20 nm). The amount of particles increases regularly with the ablation time, supporting the scalability of the production technique. The deposited nanoparticles stoichiometry has been verified by both X-ray photoelectron spectroscopy (XPS) and Energy Dispersive X-ray (EDX) analysis. Optical bandgap values of 3.70 eV were determined by UV-vis absorption measurements. All these results confirm the complete oxidation of the ablated material.     

Novel ionic liquid supported on Fe3O4 nanoparticles and its application as a catalyst in Mannich reaction under ultrasonic irradiation

A family of novel ionic liquid with l-alanine and choline chloride as environmentally benign materials have been synthesized and grafted on Fe₃O₄ nanoparticles using easy preparation techniques. The structure of ionic liquid supported on Fe₃O₄ nanoparticles (IL-Fe₃O₄ NPs) characterized by various analyses such as FE-SEM, EDX, XRD, NMR, FTIR and VSM. The catalytic activities of this catalyst are examined in the Mannich reaction for synthesis of β-aminocarbonyl compounds under ultrasonic irradiation. The recyclability of catalyst is investigated, and the results have indicated that the catalyst can be recycled six times without obvious activity decreasing.     

电化学析氢反应中单层MoSe2氢吸附机理第一性原理研究

基于密度泛函理论的第一性原理方法,本文计算了单层2H相MoSe₂纳米材料表面及两种边缘（Mo原子边缘、Se原子边缘）不同活性位点、不同氢原子吸附率下的氢吸附吉布斯自由能（Gibbs free energy,用△G_H⁰表示）,并且将对应的微观结构进行了系统分析比较,得出△G_H⁰最接近于0 eV的吸附位点及相应的吸附率.同时,结合差分电荷密度和电负性理论,分析了单层MoSe₂两种边缘氢吸附的电荷转移及成键特性,进一步解释了不同吸附位点呈现的结构与能量趋势.最后,通过基于密度泛函理论的第一性原理分子动力学模拟,研究了高温热运动对两种边缘氢吸附的影响,获得了氢原子发生脱附的临界温度及对应的微观动态过程.该理论研究从原子尺度揭示了单层2H相MoSe₂纳米材料边缘不同位点在不同温度下对氢原子吸附和脱附的微观机理,证实了Mo原子边缘的畸变和重构行为,加深了对实验中单层2H相MoSe₂边缘在不同温度下氢吸附机理的理解,为实验中通过控制MoSe₂边缘设计廉价高效的析氢催化剂提供理论参考.     

Role of graphene in improving catalytic behaviors of AuNPs/MoS2/Gr/Ni-F structure in hydrogen evolution reaction

The efficient production of hydrogen through electrocatalytic decomposition of water has broad prospects in modern energy equipment. However, the catalytic efficiency and durability of hydrogen evolution catalyst are still very deficient, which need to be further explored. Here in this work, we prove that introducing a graphene layer (Gr) between the molybdenum disulfide and nickel foam (Ni-F) substrate can greatly improve the catalytic performance of the hybrid. Owing to the excitation of local surface plasmon resonance (LSPR) of gold nanoparticles (NPs), the electrocatalytic hydrogen releasing activity of the MoS₂/Gr/Ni-F heterostructure is greatly improved. This results in a significant increase in the current density of AuNPs/MoS₂/Gr/Ni-F composite material under light irradiation and in the dark at 0.2 V (versus reversible hydrogen electrode (RHE)), which is much better than in MoS₂/Gr/Ni-F composite materials. The enhancement of hydrogen release can be attributed to the injection of hot electrons into MoS₂/Gr/Ni-F by AuNPs, which will improve the electron density of MoS₂/Gr/Ni-F, promote the reduction of H₂O, and further reduce the activation energy of the electrocatalyst hydrogen evolution reaction (HER). We also prove that the introduction of graphene can improve its stability in acidic catalytic environments. This work provides a new way of designing efficient water splitting system.     

Strain-regulated electronic structure for hydrogen evolution reaction in Fe3S4 monolayer

Electrochemical water splitting to generate hydrogen could be an important part of future renewable energy, but faces challenge due to the scarcity of effective earth-abundant electrocatalysts and insufficient understanding of catalytic mechanism. Herein, we predicated strain-induced changes in electronic structure and catalytic performance of low-cost two-dimensional Fe₃S₄ material. The calculations disclose that the half-metallic feature evolves into metallicity under applied external strain, which makes Gibbs adsorption free energy of hydrogen close to zero. Different from traditional doping and defecting strategies, this work demonstrates that excellent catalytic activity for water splitting can be achieved by inducing a small lattice deformation in Fe₃S₄ monolayer. Our findings provide new inspirations for the steering of electronic structure and designing of new-type catalysts.     

Up/down-conversion luminescence of monoclinic Gd2O3:Er3+ nanoparticles prepared by laser ablation in liquid

Multifunctional luminescent materials are attracting attention nowadays. In this work, monoclinic Gd₂O₃:Er³⁺ nanoparticles, which possess up-conversion luminescence and down-conversion luminescence properties, were successfully synthesized by laser ablation in liquid (LAL) technique. Up-conversion luminescence and down-conversion luminescence of monoclinic Gd₂O₃:Er³⁺ nanoparticles were got under the excitation of 980 nm and 379 nm, respectively. In addition, tunable luminescence was got. Furthermore, the cytotoxicity of the nanoparticles is low and the fluorescence of the nanoparticles in cell is also strong enough. The results indicate that the Gd₂O₃:Er³⁺ nanoparticles synthesized by LAL technique are promising candidates for bio-imaging or other fields that require controllable fluorescence.     

飞秒激光直写生物凝胶模板原位合成纳米粒子

为了制备具有可控复杂形状和特定化学性质的聚合物微结构,提出了一种飞秒激光直写生物凝胶模板原位合成纳米粒子的方法。首先,采用飞秒激光直写技术加工带有COOH基团的复杂三维结构的生物凝胶模板,用氢氧化钠处理使COOH基团离子化为COO^-基团;然后,用金属盐溶液处理,使金属离子与COO^-基团螯合,形成纳米粒子结晶核。通过多次循环盐溶液处理步骤,控制模板中纳米粒子的粒径与含量。实验结果表明：所制备的生物凝胶模板具有亚100 nm分辨率和10 μm量级尺寸,纳米粒子含量高达9%。该法简单高效,具有很好的应用前景。     

Metal substrates-induced phase transformation of monolayer transition metal dichalcogenides for hydrogen evolution catalysis

Monolayer transition metal dichalcogenides can normally exist in several structural polymorphs with distinct electrical, optical, and catalytic properties. Effective control of the relative stability and transformation of different phases in these materials is thus of critical importance for applications. Using density functional theory calculations, we investigate the effects of low-work-function metal substrates including Ti, Zr, and Hf on the structural, electronic, and catalytic properties of monolayer MoS₂ and WS₂. The results indicate that such substrates not only convert the energetically stable structure from the 1H phase to the 1T'/1T phase, but also significantly reduce the kinetic barriers of the phase transformation. Furthermore, our calculations also indicate that the 1T' phase of MoS₂ with Zr or Hf substrate is a potential catalyst for the hydrogen evolution reaction.     

Three-dimensional flower-like NiS2/MoS2 assembly of randomly oriented nanoplate for enhanced hydrogen evolution reaction

The continually worsening energy crisis has stimulated research into energy conversion technology to produce pure hydrogen, H₂. Transition metal-based compounds have attracted great attention as electrocatalysts for hydrogen evolution reaction (HER) as alternatives to commercial, high-cost, and scarce noble metal-based catalysts. In this work, a 3D flower-like NiS₂/MoS₂ is synthesized with the advantages of a three-dimensional (3D) morphology and the compositing of different metal compounds, thus leading to enhanced electrocatalytic performance. The structure of 3D flower-like NiS₂/MoS₂ augments the specific surface areas resulting from nanoplate assemblies as well as the heterointerface ascribed to two different phases of NiS₂ and MoS₂. These characteristics are confirmed by electrocatalytic measurements of the lower overpotential of 165 mV at 10 mA/cm² with high charge transfer ability, thus demonstrating the structure's potential for advanced electrocatalysts for the HER.     

Durability enhancement and degradation of oxygen evolution anodes in seawater electrolysis for hydrogen production

For the anode composed of electrocatalyst oxide, intermediate layer and titanium substrate, the substitution of a certain amount of iridium with tin in the IrO₂ intermediate layer was remarkably effective in elongating the life of the anode in preventing oxidation of the substrate titanium during oxygen evolution. The longest life was realized by preparation of intermediate layer with uniform thickness by brush-coating of H₂IrCl₆-SnCl₄ butanol solution and subsequent calcination. The anode with the intermediate layer prepared from 0.04 M H₂IrCl₆-0.06 M SnCl₄ butanol solution showed the best performance, that is, the oxygen evolution efficiency higher than 99.8% for more than 4300 h in the electrolysis of 0.5 M NaCl solution of pH 1 at the current density of 1000 Am⁻². An increase in SnCl₄ concentration decreased the viscosity of the coating solution with a consequent enhancement of uniformity of the intermediate layer but decreased the thickness of the intermediate layer acting as a barrier to prevent oxidation of titanium. Thus, the best performance was attained at an intermediate SnCl₄ concentration. The growth of an oxide layer on titanium during electrolysis occurred and was found by the potential increase.     

One-step aqueous synthesis of CdS nanoparticles as a novel fluorescence probe for the ultrasensitive detection of DNA

One-step aqueous synthesis of CdS nanoparticles as a novel fluorescence probe for sensitive and selective determination of DNA with synchronous fluorescence spectrometric method has been developed. Different from the traditional organometallic route, in which toxic precursors or solvents might be used, the wet chemical approach demonstrated in this paper is superior in terms of simplicity, using of nontoxic materials, mild synthetic condition and good reproducibility. When Δλ=255 nm, maximum synchronous fluorescence is produced at 264 nm, the synchronous fluorescence intensity of the composite nanoparticles is significantly decreased in the presence of trace DNA at PH 0.91. Under optimal conditions, the linear ranges of the calibration curves are 0.08-30.0 μg mL⁻¹ for ctDNA and 0.05-35.0 μg mL⁻¹ for hsDNA, respectively. The detection limits are 1.5 ng mL⁻¹ for ctDNA and 2.2 ng mL⁻¹ for hsDNA, respectively. Furthermore, the method is successfully applied to the quantification of DNA in synthetic samples. The results show that this proposed method is stable, sensitive and practical for the determination of trace DNA.     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

Direct pyrolysis and ultrasound assisted preparation of N,S co-doped graphene/Fe3C nanocomposite as an efficient electrocatalyst for oxygen reduction and oxygen evolution reactions

Bifunctional electrocatalysts to enable efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are essential for fabricating high performance metal–air batteries and fuel cells. Here, a defect rich nitrogen and sulfur co-doped graphene/iron carbide (NS-GR/Fe₃C) nanocomposite as an electrocatalyst for ORR and OER is demonstrated. An ink of NS-GR/Fe₃C is developed by homogeneously dispersing the catalyst in a Nafion containing solvent mixture using an ultrasonication bath (Model-DC150H; power − 150 W; frequency − 40 kHz). The ultrasonically prepared ink is used for preparing the electrode for electrochemical studies. In the case of ORR, the positive half-wave potential displayed by NS-GR/Fe₃C is 0.859 V (vs. RHE) and for the OER, onset potential is 1.489 V (vs. RHE) with enhanced current density. The optimized NS–GR/Fe₃C electrode exhibited excellent ORR/OER bifunctional activities, high methanol tolerance and excellent long-term cycling stability in an alkaline medium. The observed onset potential for NS–GR/Fe₃C electrocatalyst is comparable with the commercial noble metal catalyst, thereby revealing one of the best low-cost alternative air–cathode catalysts for the energy conversion and storage application.     

The impact of ultrasonic parameters on the exfoliation of NiFe LDH nanosheets as electrocatalysts for the oxygen evolution reaction in alkaline media

The ultrasonic process has been examined to exfoliate layered materials and upgrade their properties for a variety of applications in different media. Our previous studies have shown that the ultra-sonication treatment in water without chemicals has a positive influence on the physical and electrochemical performance of layered materials and nanoparticles. In this work, we have probed the impact of ultrasonication on the physical properties and the oxygen evolution reaction (OER) of the NiFe LDH materials under various conditions, including suspension concentration (2.5–12.5 mg mL⁻¹), sonication times (3–20 min) and amplitudes (50–90%) in water, in particular, sonication times and amplitudes. We found that the concentration, amplitude and time play significant roles on the exfoliation of the NiFe LDH material. Firstly, the NiFe LDH nanosheets displayed the best OER performance under ultrasonic conditions with the concentration of 10 mg mL⁻¹ (50% amplitude and 15 min). Secondly, it was revealed that the exfoliation of the NiFe LDH nanosheets in a short time (<10 min) or a higher amplitudes (≥80%) has left a cutdown on the OER activity. Comprehensively, the optimum OER activity was displayed on the exfoliated NiFe LDH materials under ultrasonic condition of 60% (amplitude), 10 mg mL⁻¹ and 15 min. It demanded only 250 mV overpotentials to reach 10 mA cm⁻² in 1 M KOH, which was 100 mV less than the starting NiFe LDH material. It was revealed from the mechanism of sonochemistry and the OER reaction that, after exfoliation, the promoted OER performance is ascribed to the enriched Fe³⁺ at the active sites, easier oxidation of Ni²⁺ to Ni³⁺, and the strong electrical coupling of the Ni²⁺ and Fe³⁺ during the OER process. This work provides a green strategy to improve the intrinsic activity of layered materials.     

Poly(4-vinylpyridine) supported acidic ionic liquid: A novel solid catalyst for the efficient synthesis of 2,3-dihydroquinazolin-4(1H)-ones under ultrasonic irradiation

A novel poly(4-vinylpyridine) supported acidic ionic liquid catalyst was synthesized by the reaction of 4-vinylpyridine with 1,3-propanesultone, followed by the polymerization and the addition of the heteropolyacid. Due to the combination of polymer features and ionic liquid, it acted as a heterogeneous catalyst to effectively catalyze the cyclocondensation reaction of anthranilamide with aldehydes under ultrasonic irradiation and afforded the corresponding 2,3-dihydro-4(1H)-quinazolinones compounds in good to excellent yields. In addition, the catalyst could be easily recovered by the filtration and reused six times without significant loss of catalytic activity. More importantly, the use of ultrasonic irradiation can obviously accelerate the reaction.     

A flow‐through reaction cell for in situ X‐ray diffraction and absorption studies of heterogeneous powder–liquid reactions and phase transformations

A portable powder–liquid high‐corrosion‐resistant reaction cell has been designed to follow in situ reactions by X‐ray powder diffraction (XRD) and X‐ray absorption spectroscopy (XAS) techniques. The cell has been conceived to be mounted on the experimental stations for diffraction and absorption of the Spanish CRG SpLine‐BM25 beamline at the European Synchrotron Radiation Facility. Powder reactants and/or products are kept at a fixed position in a vertical geometry in the X‐ray pathway by a porous membrane, under forced liquid reflux circulation. Owing to the short pathway of the X‐ray beam through the cell, XRD and XAS measurements can be carried out in transmission configuration/mode. In the case of the diffraction technique, data can be collected with either a point detector or a two‐dimensional CCD detector, depending on specific experimental requirements in terms of space or time resolution. Crystallization processes, heterogeneous catalytic processes and several varieties of experiments can be followed by these techniques with this cell. Two experiments were carried out to demonstrate the cell feasibility: the phase transformations of layered titanium phosphates in boiling aqueous solutions of phosphoric acid, and the reaction of copper carbonate and l ‐isoleucine amino acid powders in boiling aqueous solution. In this last case the shrinking of the solid reactants and the formation of Cu(isoleucine)₂ is observed. The crystallization processes and several phase transitions have been observed during the experiments, as well as an unexpected reaction pathway.     

Poly(4-vinylpyridinium)hydrogen sulfate: a novel and efficient catalyst for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthenes under conventional heating and ultrasound irradiation

A simple and convenient procedure for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthenes is described through a one-pot condensation of 2-naphthol with aryl aldehydes in the presence of poly(4-vinylpyridinium)hydrogen sulfate as an efficient, cheap, readily synthesized and eco-friendly catalyst in a solvent free media using conventional heating and ultrasound irradiation.