Pressure-induced phase transition of wulfenite

The in-situ high-pressure structures of wulfenite have been investigated by means of angular dispersive X-ray diffraction with diamond anvil cell and synchrotron radiation. In the pressure up to 22.9 GPa, a pressure-induced scheelite-to-fergusonite transition is observed at about 10.6 GPa. The pressure dependence for the lattice parameters of wulfenite is reported, and the axial compression coefficients Ka₀=－1.36×10^－3 GPa^－1 and Kc₀= －2.78×10^－3 GPa^－1 are given. The room-temperature isothermal bulk modulus is also obtained by fitting the P-V data using the Murnaghan equation of state.

     

Pressure-induced phase transition of B-type Y_2O_3

The synthesized monoclinic(B-type) phase of Y_2O_3 has been investigated by in situ angle-dispersive x-ray diffraction in a diamond anvil cell up to 44 GPa at room temperature. A phase transition occurs from monoclinic(B-type) to hexagonal(A-type) phase at 23.5 GPa and these two phases coexist even at the highest pressure. Parameters of isothermal equation of state are V_0= 69.0(1) ~3, K_0= 159(3) GPa, K_0= 4(fixed) for the B-type phase and V_0= 67.8(2) ~3, K_0= 156(3) GPa,K'_0= 4(fixed) for the A-type phase. The structural anisotropy increases with increasing pressure for both phases.     

Structural phase transition in Bi2Te3 under high pressure

Structural change in Bi₂Te₃ under high pressure up to 16.6 GPa has been studied by powder x-ray diffraction. We observed two times of phase transitions at room temperature at the pressures of 8 and 14 GPa, respectively. According to our preliminary result on electrical resistance, it is reasonable to suppose that superconducting transition with T _c =2.8 K at the pressures of 10.2 GPa is observed in phase II. On the other hand, we found anomalies of the pressure dependences of lattice parameters and volume at around 2 GPa, which probably means the change in electrical structure on the Fermi surface.     

Pressure-induced phase transition and structural properties of CrO2

The structural properties and pressure-induced phase transitions of CrO₂ have been investigated using the pseudopotential plane-wave method based on the density functional theory (DFT). The rutile-type (P4₂/mnm), CaCl₂-type (Pnnm), pyrite-type (Pā3), and CaF₂-type (Fm-3m) phases of CrO₂ have been considered. The structural properties such as lattice parameters, bulk moduli and its pressure derivative are consistent with the available experimental data. The second-order phase-transition pressure of CrO₂ from the rutile phase to CaCl₂ phase is 10.9?GPa, which is in good agreement with the experimental result. The sequence of these phases is rutile-type?→?CaCl₂-type?→?pyrite-type?→?CaF₂-type with the phase-transition pressures 10.9, 23.9, and 144.5?GPa, respectively. The equation of state of different phases has also been presented. It is more difficult to compress with the increase of pressure for different phases of CrO₂.     

Progress in functional studies of transition metal borides

In recent years, transition metal borides (TMBs) have attracted much attention because they are considered as potential superhard materials and have more abundant crystal structures compared with traditional superhard materials. So far, however, no superhard materials have been found in TMBs. A large number of structures and potential new properties in TMBs are induced by the various hybridization ways of boron atoms and the high valence electrons of transition metals, which provide many possibilities for its application. And most TMBs have layered structures, which make TMBs have the potential to be a two-dimensional (2D) material. The 2D materials have novel properties, but the research on 2D TMBs is still nearly blank. In this paper, the research progress of TMBs is summarized involving structure, mechanical properties, and multifunctional properties. The strong covalent bonds of boron atoms in TMBs can form one-dimensional, two-dimensional, and three-dimensional substructures, and the multiple electron transfer between transition metal and boron leads to a variety of chemical bonds in TMBs, which are the keys to obtain high hardness and multifunctional properties of TMBs. Further research on the multifunctional properties of TMBs, such as superconductors, catalysts, and high hardness ferromagnetic materials, is of great significance to the discovery of new multifunctional hard materials.     

Pressure induced phase transition behaviour in f-electron based dialuminides

The rare-earth and actinide based compounds are endowed with several exotic physical and chemical properties due to the presence of f-electrons. These properties exhibit interesting changes under the action of various thermodynamic fields and hence continues to be a subject of extensive research. For instance, under pressure, the nature of f-electrons can be changed from localized to itinerant, leading to a variety of changes in their structural, physical and chemical properties. The present review on the high pressure phase transition behaviour of dialuminides of rare earths and actinides is an outcome of research in our laboratory during the last five years using a unique combination of a Guinier diffractometer and a diamond anvil cell built in-house. To bring out the correlations between the compressibility and structural behaviour with the electronic structure, we have also carried out electronic structure calculation. Further, the usefulness of Villars’ three parameter structure maps in predicting pressure induced structural transitions has been explored and this has been illustrated with the available phase transition data.     

Pressure-induced phase transition of crystalline and amorphous silicon and germanium at low temperatures

Abstract

X-ray diffraction has been measured for crystalline silicon, crystalline germanium, amorphous silicon and amorphous germanium at temperatures down to 100 K and pressures up to 20 GPa using a diamond anvil cell and synchrotron radiation. The structural phase transitions, including amorphization, take place in the pressure-temperature range. It has been found that the structures after the phase transitions strongly depend on the path in the pressure-temperature diagram through which the system undergoes the phase transitions. For any of the aforementioned four materials, the high-pressure phase with the p-Sn structure is quenched during a release of pressure at 100 K, and transforms into an amorphous state when heated up to around 2 GPa. The path dependence of the states is discussed in relation to the pressure dependence of the heights of the energy barriers which have to be overcome when phase transitions occur. The effect of a structural disorder on the phase transition is also discussed by comparing the experimental results for the crystalline and amorphous materials.     

Strain effects on phase transitions in transition metal dichalcogenides

We perform density functional theory calculation to investigate the structural and electronic properties of various two-dimensional transition metal dichalcogenides, MX₂ (M=Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, or W, and X=S or Se), and their strain-induced phase transitions. We evaluate the relative stability and the activation barrier between the octahedral-T and the trigonal-H phases of each MX₂. It is found that the equilibrium and phase transition characteristics of MX₂ can be classified by the group to which its metal element M belongs in the periodic table. MX₂ with M in the group 4 (Ti, Zr, or Hf), forms an octahedral-T phase, while that with an M in the group 6 (Cr, Mo, or W) does a trigonal-H phase. On the other hand, MX₂ with M in the group 5 (V, Nb, or Ta), which is in-between the groups 4 and 6, may form either phase with a similar stability. It is also found that their electronic structures are strongly correlated to the structural configurations: mostly metallic in the T phase, while semiconducting in the H phase, although there are some exceptions. We also explore the effects of an applied stress and find for some MX₂ materials that the resultant strain, either tensile or compressive, may induce a structural phase transition by reducing the transition energy barrier, which is, in some cases, accompanied by its metal-insulator transition.     

Performance of different types of detectors in a high-pressure X-ray study of phase transition

Abstract

Phase transitions in praseodymium and lanthanum under pressure have been studied using a synchrotron powder X-ray diffraction technique. A structure refinement of the distorted fcc phase of Pr using diffraction data collected with an imaging plate (IP) detector demonstrate that among some possible structures the rhombohedral structure with space group R3m best reproduces the observed diffraction pattern. The distorted fcc-fcc phase transition in La was observed as a function of the temperature at 23 GPa using a CCD-based detector. A five-minute exposure sufficiently long to measure the intensities of very weak superlattice reflections from the distorted fcc phase, which has been found to transform to the fcc phase at 550 K. The performance of the IP and a CCD-based detector are compared and their future developments discussed.     

Pressure-induced phase transition of ice in aqueous LiOH solution

I have examined the changes in in situ Raman spectra of ice in aqueous LiOH solution as a function of pressure at liquid nitrogen temperature (77 K). Here, I have shown the possibility that ice in aqueous LiOH solution transforms to a high-density amorphous like phase at around 0.9 GPa. I have mentioned that the results show differences strongly depending on the salts dissolved in the aqueous solutions.     

Equal compressibility structural phase transition of molybdenum at high pressure

We have studied the high-pressure compression behavior of molybdenum up to 60 GPa by synchrotron radial x-ray diffraction (RXRD) in a diamond anvil cell (DAC). It is found that all diffraction peaks of molybdenum undergo a split at around 27 GPa, and we believe that a phase transition from a body-centered cubic structure to a rhombohedral structure at room pressure has occurred. The slope of pressure-volume curve shows continuity before and after this phase transition, when fitting the pressure-volume curves of the body-centered cubic structure at low pressure and the rhombohedral structure at high pressure. A bulk modulus of 261.3 (2.7) GPa and a first-order derivative of the bulk modulus of 4.15 (0.14) are obtained by using the nonhydrostatic compression data at the angle ψ = 54.7° between the diffracting plane normal and stress axis.     

Pressure effect on phase transition in ferroelectic polymers

Pressure effects of phase transition behaviour in two kinds of ferroelectric polymers of poly(vinylidene fluoride), PVDF, and copolymers of vinylidene fluoride and trifluoroethylene, (VDF/TrFE), are discussed. In the case of PVDF, several high-pressure treatments including a high-pressure annealing and a uniaxial compression were shown to induce a crystal transformation from a non-polar Form II crystal to a polar Form I crystal, which has ferroelectric characteristics and high piezoelectric activity. In addition, substantial pressure effects on ferroelectric phase transition points as well as crystal structures were observed for (VDF/TrFE) copolymers with different VDF contents. The most significant pressure effects were observed for copolymer samples with unstable ferroelectric structures at atmospheric pressure. From high-pressure X-ray and Raman scattering studies, these pressure effects were suggested to originate from the pressure-induced conformational transition from gauche to trans in the molecular chains.     

Pressure-induced structural transformation in potassium stanichloride

Pressure-induced structural transformation in potassium stanichloride has been studied by x-ray diffraction at room temperature. The change in the diffraction pattern started at about a pressure of 15 kbar and continued upto 50 kbar. The pattern recorded at about 50 kbar could be indexed basing on an orthorhombic lattice, with lattice parametersa=7.32,b=7.02 andc=8.02 Å.     

Pressure-induced structural phase transition in transition metal carbides TMC (TM = Ru,Rh, Pd,Os, Ir,Pt): a DFT study

First-principles calculations based on density functional theory was performed to analyse the structural stability of transition metal carbides TMC (TM = Ru, Rh, Pd, Os, Ir, Pt). It is observed that zinc-blende phase is the most stable one for these carbides. Pressure-induced structural phase transition from zinc blende to NiAs phase is predicted at the pressures of 248.5 GPa, 127 GPa and 142 GPa for OsC, IrC and PtC, respectively. The electronic structure reveals that RuC exhibits a semiconducting behaviour with an energy gap of 0.7056 eV. The high bulk modulus values of these carbides indicate that these metal carbides are super hard materials. The high B/G value predicts that the carbides are ductile in their most stable phase.     

LiTaO3晶体高压结构相变的理论研究

利用基于密度泛函理论的平面波赝势结合局域密度近似的从头算方法,计算了LiTaO3晶体在0~200 GPa压力范围内的冷压曲线(P-V/V0)和零温焓,以研究它的高压结构相变.参照同构体LiNbO3的高压相结构,对LiTaO3的菱形相(R3c对称群,室温大气压结构)和正交相(Pbnm对称群)进行计算.结果表明,菱形相压缩线与低压冲击实验数据和静压结果符合较好,而正交相压缩线与扣除热压贡献的高压冲击实验数据相符;正交相更难压缩且各轴向的压缩率不同,对应的常态密度比菱形相高约24%.理论预测的相变起始压力约为23 GPa.由此可见LiTaO3的冲击高压相具有正交对称性,与LiNbO3的室温高压相类似.     

Pressure-induced structural phase transformation and elastic properties of transition metal mononitrides

The high-pressure structural phase transition in six transition metal mononitrides (TMNs) (M=Ti, Mo, V, Nb, Hf, and Zr), have been studied using a two-body interionic potential theory which includes the effect of Coulomb screening due to the semi-metallic nature of these compounds. The present theoretical results have been compared with the corresponding experimental and predictions of LDA theory. These TMN compounds have been found to undergo NaCl (B₁) to CsCl (B₂) phase transition, at a pressure quite high as compared to other binary systems. We have also predicted the elastic constants. It is shown that these binary materials are partially ionic in nature and the structural transformation is analogous to several other ionic binary systems.     

Pressure-induced structural phase transition in RbAu

Using the first principle method based on density functional theory, the structural and elastic properties calculations of RbAu have been performed. The results demonstrate that RbAu is stable in the CsCl structure (B2) at ambient pressure, which is in well agreement with the experimental results. And there exists a structural phase transition from CsCl-type structure (B2) to NaTi-type structure (B32) at the transition pressure of approximate 6 GPa. The pressure effects on the elastic properties are discussed and the elastic property calculation indicates elastic instability maybe provide phase transition driving force according to the variations relation of the elastic constant versus pressure.     

Pressure-induced phase transition and stability of EuO and EuS with NaCl structure

We have predicted the phase transition pressures and corresponding relative volume changes of EuO and EuS having NaCl-type structure under high pressure using three-body interaction potential (TBIP) approach. In addition, the conditions for relative stability in terms of modified Born criterion has been checked. Our calculated results of phase transitions, volume collapses and elastic behaviour of these compounds are found to be close to the experimental results. This shows that the inclusion of three-body interaction effects makes the present model suitable for high pressure studies.