HL-2M 初始放电位形及波形设计

利用 EFIT 设计了可用于 HL-2M 初始放电的圆截面限制器位形以及偏滤器位形;设计了满足放电击 穿条件要求(零场区域平均杂散磁场应不超过 20G)的零场位形。综合分析放电过程伏秒数消耗及真空室涡流的影 响,使用 PF8 线圈电流补偿真空室涡流产生的杂散磁场,设计了等离子体电流 200kA 的限制器位形及偏滤器位形 的自洽的放电波形。将该放电波形作为放电调试的参考波形,成功实现了限制器位形的初始放电实验。      

预试环垂直杂散场

通过氢气击穿实验从数量级上推算了预试环(一个无铜壳的小托卡马克装置)的垂直杂散场。结果符合于按环向场绕组的过渡线和补偿回线的汁算值以及用磁探针对加热场杂散场的测量值。     

Measurement of Temperature and Density Profiles of the Plasma at PR-2 Facility

A new system of probe diagnostics at linear plasma simulator PR-2 is described, allowing us to measure the profiles of plasma temperature and density in different cross sections of the plasma column. The Langmuir probe fixed to the movable part of the two-coordinate positioning system built into the PR-2 passes the region of the discharge area during the process of measuring plasma parameters. The overall dimensions of the positioning system make it possible to mount electrical probes (magnetic probes, optical fibers, and other diagnostic equipment) covering almost the entire volume of the vacuum chamber between the magnetic mirrors of the device. We present the measurement results of local plasma parameters of the beam-plasma discharge (BPD) for different values of the input power and working gas pressure. The boundaries of appearance of discharge of three types were determined: the diffusive BPD mode, the BPD mode, and the arc mode. Dependences of the plasma concentration and temperature on the input power for different values of pressure have been also determined.     

真空断路器弧后残余等离子体的探针诊断方法

真空断路器开断过程中弧后残余等离子体是表征其开断性能的重要参量。基于探针电子饱和区域工作原理,提出了一种真空电弧弧后残余等离子体电子密度测量方法,分析了其结构和工作原理。设计了探针诊断系统的探针结构和控制系统,基于可拆卸真空腔体进行了残余等离子体电子密度的单探针测量实验,采用高速相机观测电弧发展演变过程,研究了电流大小、触头结构等参数对残余等离子体衰减过程的影响。通过前人其他诊断方法对比验证了该测量方法的有效性,为后续真空断路器弧后微观特性研究提供了一种低成本、有效的诊断方法。     

托卡马克装置的击穿条件

在CT-6B托卡马克实验装置上研究了充气气压、环向磁场、杂散磁场、环电压等放电条件对击穿的影响。发现垂直方向和水平方向的杂散磁场对击穿影响不同。指出实验结果与汤生放电模型的偏离。用Monte-Carlo方法解出击穿阶段电子分布函数,对汤生模型公式作出修正。 关键词：     

A rotating probe for measuring the inhomogeneity of a magnetic field

The theory is given of a rotating probe for measuring the inhomogeneity of a magnetic field. The design of the instrument and its calibration are described, giving its sensitivity and some methods of use such as the measurement of saturation magnetization, the Curie point and hysteresis loops.     

Determination of Plasma Position Using Poloidal Flux Loops and Comparison With Magnetic Probe Measurement in IR-T1 Tokamak

In this paper, we present two magnetic techniques for the measurement of plasma position in IR-T1 tokamak: a poloidal flux loop and a magnetic probe method. In the first method, two flux loops were designed and installed toroidally on the outer surface of the IR-T1 tokamak, and then, displacement of the plasma column was measured from them. In addition, to compare the plasma position obtained using the flux loops, an array of four magnetic probes was designed, constructed, and installed on the outer surface of the IR-T1 tokamak, and plasma position was measured from them. Results were compared and found to be in good agreement with each other.      

基于金刚石NV色心的纳米尺度磁场测量和成像技术

纳米级分辨率的磁场测量和成像是磁学中的一种重要研究手段.金刚石中的单个氮-空位点缺陷电子自旋作为一种量子传感器,具有灵敏度高、原子级别尺寸、可工作在室温等诸多优势,灵敏度可以达到单核自旋级别,空间分辨率达到亚纳米.将这种磁测量技术与扫描成像技术结合,能够实现高灵敏度和高分辨率的磁场成像,定量地重构出杂散场.这种新型的磁成像技术可以给出磁学中多种重要的研究对象如磁畴壁、反铁磁序、磁性斯格明子的结构信息.随着技术的发展,基于氮-空位点缺陷的磁成像技术有望成为磁性材料研究的重要手段.     

利用离子声波朗道阻尼测量氧化物阴极放电中的离子温度

作为等离子体重要参数之一, 特别是在低温等离子体中离子温度的测量一直较为困难. 在磁化线性等离子体装置氧化物阴极脉冲放电条件下, 利用栅网激发离子声波, 通过测量波幅在朗道阻尼作用下随空间的演化, 利用阻尼长度是离子温度和电子温度的函数, 计算得到离子温度为0.3 eV. 测量值与国外类似装置利用光谱诊断所得结果基本相同.     

Non-volatile multi-state magnetic domain transformation in a Hall balance

High performance of the generation, stabilization and manipulation of magnetic skyrmions prompts the application of topological multilayers in spintronic devices. Skyrmions in synthetic antiferromagnets (SAF) have been considered as a promising alternative to overcome the limitations of ferromagnetic skyrmions, such as the skyrmion Hall effect and stray magnetic field. Here, by using the Lorentz transmission electron microscopy, the interconversion between the single domain, labyrinth domain and skyrmion state can be observed by the combined manipulation of electric current and magnetic field in a Hall balance (a SAF with the core structure of [Co/Pt]₄/NiO/[Co/Pt]₄ showing perpendicular magnetic anisotropy). Furthermore, high-density room temperature skyrmions can be stabilized at zero field while the external stimulus is removed and the skyrmion density is tunable. The generation and manipulation method of skyrmions in Hall balance in this study opens up a promising way to engineer SAF-skyrmion-based memory devices.     

磁场电源在 HL-2M 装置初始等离子体放电中的应用

磁场电源是 HL-2M 装置初始等离子体放电的重要组成部分,它关系到 HL-2M 装置零场的建立,等 离子体的击穿和维持及位形控制。为实现初始等离子体放电所需的供电电压和电流,对磁场电源从主回路、控制、 测量和保护分别作了相应的调整。在此基础上进行了大量的工程调试,确保了磁场电源的控制和保护等性能达到 初始等离子体放电的需求。在磁场电源运行中,电源控制性能和输出参数的一致性、纹波质量等都有显著提高。 介绍了磁场电源在调试及 HL-2M 装置初始放电中的应用。     

预试环实验

本文叙述加热场与垂直场分开供电后预试环所作的氢气击穿、平衡、杂散场测量、垂直场波形调整和放电清洗等实验。得到了重复性较好的托卡马克等离子体,其电流峰值为10kA,持续时间2.5ms。     

A divertor plasma configuration design method for tokamaks

The efficient and safe operation of large fusion devices strongly relies on the plasma configuration inside the vacuum chamber.It is important to construct the proper plasma equilibrium with a desired plasma configuration.In order to construct the target configuration,a shape constraint module has been developed in the tokamak simulation code(TSC),which controls the poloidal flux and the magnetic field at several defined control points.It is used to construct the double null,lower single null,and quasi-snowflake configurations for the required target shape and calculate the required PF coils current.The flexibility and practicability of this method have been verified by the simulated results.     

由磁测量确定环流器等离子体截面形状的方法

一、引言在环流器实验中,等离子体柱截面形状和位置是位形基本参数。尤其对非圆截面和放电期间截面变化的装置,为调节、控制成形、分析等离子体内外电流分布变化引起的位形和稳定性改变,边界磁面形状位置是不可缺少的信息。本文用给定极向磁场,由拟合计算的方法来确定等离子体边界。     

外磁场对介质表面次级电子倍增效应的影响

本文采用Particle-in-cell数值方法模拟研究了不同强度外磁场条件下的次级电子倍增效应过程,分析了外磁场对次级电子倍增效应的影响.结果表明,当外磁场达到一定强度时,次级电子倍增效应在微波传输的一半时间内被抑制.通过外磁场抑制,在理想条件下可以使介质窗的微波传输功率容量提高4倍以上.     

Stray field interaction of stacked amorphous tapes

In this study, magnetic cores made of amorphous rectangular tape layers are investigated. The quality factor Q of the tape material decreases rapidly, however, when stacking at least two tape layers. The hysteresis loop becomes non-linear, and the coercivity increases. These effects are principally independent of the frequency and occur whether tape layers are insulated or not. The Kerr-microscopy was used to monitor local hysteresis loops by varying the distance of two tape layers. The magnetization direction of each magnetic domain is influenced by the anisotropy axis, the external magnetic field and the stray field of magnetic domains of the neighboring tape layers. We found that crossed easy axes (as the extreme case for inclined axes) of congruent domains retain the remagnetization and induce a plateau of the local loop. Summarizing local loops leads to the observed increase of coercivity and non-linearity of the inductively measured loop. A high Q-factor can be preserved if the easy axes of stacked tape layers are identical within the interaction range in the order of mm.     

利用金刚石氮-空位色心精确测量弱磁场的探索

基于金刚石氮-空位色心对精确测量微弱静磁场进行了探索.金刚石氮-空位色心电子自旋的退相干时间高度依赖于外磁场,而不同的退相干特征时间对磁场的灵敏度不同.对金刚石氮-空位色心电子自旋在不同强度外磁场下的退相干过程进行模拟,得到不同退相干特征时间与磁场大小的高准确度关系,提出了基于响应度最高的退相干特征时间测量静态弱磁场大小和方向的方法,并分析了该方法测量静态弱磁场的灵敏度,证明该方法的测量灵敏度比一般磁场测量仪器更高.     

提高激光抽运铯原子磁力仪灵敏度的研究

本文报道了一种基于激光抽运射频共振的铯原子磁力仪. 通过圆偏振光将铯原子抽运到暗态, 实现偏极化. 外磁场存在时, 原子磁矩将以拉莫尔频率绕外磁场进动. 在共振射频磁场的作用下, 原子被去极化而重新吸收光子. 通过探测出射光光谱可以测得拉莫尔频率进而得到外磁场的信息. 本文通过运用自制的894 nm 外腔半导体激光器, 建立了激光稳频装置和低噪声磁场测量环境, 实现了一种基于铯原子激光抽运射频共振的磁力仪. 通过磁力仪参数优化以及闭环测量, 磁力仪测量的外磁场达到了19 fT/Hz^1/2的极限灵敏度和1.8 pT/Hz^1/2的本征灵敏度, 空间分辨率小于2 cm. 关键词： 光抽运 塞曼效应 光探测磁共振 磁力仪     

基于裸光纤探头的双点光子多普勒测速系统

全光纤光子多普勒速度测量(PDV)系统是一种新型的激光测速系统,可广泛用于冲击波、爆轰波以及其他短时高速运动物体的速度测量。多点测量可以获得靶面不同位置的速度,以测量靶面的形变。为提高测量的空间分辨率,提出使用裸光纤束为PDV系统的探头,并在实验上实现了空间分辨率为375μm的双点速度测量。裸光纤探头的间距较小,一个探头的测量结果可能受到另一个探头反射光的干扰。理论和实验的研究结果表明,当靶面各点速度相同时,测量结果不受干扰光的影响;当各点速度不同时,其测速误差不但与两被测点的速度差有关,还与传感光和干扰光的光强和相位有关。     

Nanoscale laser processing and diagnostics

The article summarizes research activities of the Laser Thermal Laboratory on pulsed nanosecond and femtosecond laser-based processing of materials and diagnostics at the nanoscale using optical-near-field processing. Both apertureless and apertured near-field probes can deliver highly confined irradiation at sufficiently high intensities to impart morphological and structural changes in materials at the nanometric level. Processing examples include nanoscale selective subtractive (ablation), additive (chemical vapor deposition), crystallization, and electric, magnetic activation. In the context of nanoscale diagnostics, optical-near-field-ablation-induced plasma emission was utilized for chemical species analysis by laser-induced breakdown spectroscopy. Furthermore, optical-near-field irradiation greatly improved sensitivity and reliability of electrical conductance atomic force microscopy enabling characterization of electron tunneling through the oxide shell on silicon nanowires. Efficient in-situ monitoring greatly benefits optical-near-field processing. Due to close proximity of the probe tip with respect to the sample under processing, frequent degradation of the probe end occurs leading to unstable processing conditions. Optical-fiber-based probes have been coupled to a dual-beam (scanning electron microscopy and focused ion beam) system in order to achieve in-situ monitoring and probe repair.