Diazadiphosphetidine. VII. Neue Diazadiphosphetidin-oxide und -oxid-sulfide

Diazadiphosphetidines. VII. New Diazadiphosphetidine Oxides and Oxide Sulfides By reaction of phosphoric tris(methylamide) with tris(dimethylamino)phosphane and tris(diethylamino)phosphane, the diazadiphosphetidine oxides V and I , as well as VI and II are obtained, respectively. With elemental sulfur these compounds form the diazadiphosphetidine oxide sulfides VI and III , as well as VIII and IV , respectively. The n.m.r. spectra of the compounds II — VII are reported and discussed.     

Niederkoordinierte Phosphorverbindungen. 58. Synthese und Reaktivität der 2, 4, 6-Tri-tert-butylphenyl (halogenmethylen)phosphane

The synthesis of the 2,4,6-tri-tert-butylphenyl(halogenmethylene)phosphanes 4a—d from the tri-tert-butylphenylphosphane 1 and trihalogenomethanes 2a—d is described. Tri-tert-butylphenyl(difluoromethylene)phosphane 8a and the analogous (diiodomethylene)-phosphane 8d are obtained by dehalogenation of the chloro(trifluoromethyl)phosphane 7 and dehydrohalogenation of the triiodomethylphosphane 10 . The first different halogeno-substituted (bromochloromethylene)phosphane 8e leads after metallation with lithiumbis (trimethylsilyl)phosphide 13 and elimination of lithiumchloride to the phosphaalkyne 16 . Direct addition of chlorotrimethylsilane to the metallated 8e yields the 2,4,6-tri-tert-butylphenyl(chloro(trimethylsilyl)-methylene)phosphane 17 .     

The synthesis of higher cyclomethylalkylsilazanes

The ammonolysis of dichloro(isobutyl)methylsilane and dichloro(methyl)(nonyl)silane forms triisobutyltrimethylcyclotrisilazane, tetraisobutyltetramethylcyclotetrasilazane, and trimethyltrinonylcyclotrisilazane. The coammonolysis of dichloro(isobutyl)(methyl)silane with trichloro(nonyl)silane gave a cyclic compound with free amino groups-3,7-diamino-1,1,5,5-tetraisobutyl-1,1,5,5-tetramethyl-3, 7-dinonylcyclotetrasilazane- and the coammonolysis of dichloro(isobutyl) (methyl)silane with trichloro-(isobutyl)silane yielded bicyclic products-1,3,5,7-tetraisobutyl-1,5-dimethylbicyclotetrasilazane and 1,3,5,7,9pentaisobutyl-1,5,7-trimethylbicyclopentasilazane.     

Synthesis, characterization, reactivity and theoretical studies of ruthenium carbonyl complexes containing ortho-substituted triphenyl phosphanes

A series of ruthenium o-phosphane complexes was synthesized and characterized. The reactivity of the prepared complexes was studied by using them as catalysts for the hydroformylation of 1-hexene. The activities depended on the binding mode of the phosphane and on the strength of the ruthenium-phosphane interaction. Strongly coordinated chelating [2-(dimethylamino)phenyl]-(diphenyl) phosphane and [2-(methylthio)phenyl]-(diphenyl) phosphane showed poor activity, while weakly chelated [2-(methoxy)phenyl]-(diphenyl) phosphane and non-chelating phosphanes such as [2-(methyl)phenyl]-(diphenyl) phosphane or [2-(ethyl)phenyl]-(diphenyl) phosphane led to higher activities.     

有机磷化合物的研究 VIII. 酸性有机磷化合物的气相色谱

Acidic organophosphorus compounds may be identified by GLC via their methyl esters, usually prepared from diazomethane. The wide applications of this mthod are, however, limited by the toxicity of diazomethane. Tetramethyl ammonium hydroxide in methanol solution reacted rapidly with acidic organophosphorus compounds at room temperature to form tetramethyl ammonium salts, which were then converted to the corresponding methyl esters by pyrolysis at 300-350 deg.C. A simple and convenient method for separation and identification of various types of acidic phosphates, phosphonates and phosphinates by GLC has been developed. The GLC behaviours of phosphoric acid dialkyl esters, mono-esters of phenyl-and cyclohexyl-phosphonic acids as well as dialkylphosphinic acids can be represented by corrected retention time (t'R) which correlates linearly with the number of carbon atoms of the alkyl groups in these organophosphorus compounds. The influence of number of carbon atoms and isomerization of alkyl group on t'R values and retention index (I) calculated by Kovats equation was discussed. As shown by our experiments the change in retention index (ΔI) in the homologous series of phosphoric acid dialkyl esters is nearly a constant on lengthening the alkyl group of the esters with methylene linkages.     

The Nature of the Phosphorus Tellurium Bond in Tellurophosphoranes and their Derivatives

Abstract

Tellurophosphoranes, which may be considered as phosphane chalkogenides (I) or as phosphane stabilized tellurium atoms (II), form coordination compounds III and IV. The nature of both the phosphorus tellurium and the phosphorus element bond is discussed from chemical and spectroscopic properties.     

Niederkoordinierte Phosphor-Verbindungen. 25 [1]. Pericyclische Reaktionen an Hetero-Hexadienen

Low-Coordinated Phosphorus Compounds. 25. Pericyclic Reactions at Hetero-Hexadienes The hetero-hexadienes 1—8 , most of them prepared for the first time, were investigated with respect to pericyclic reactions. Only the (λ³PC)-double-bond of the phosphaalkenes reacts in such a way as shown by the Diels-Alder-reaction of 7 and the Cope-rearrangement of 8 . Hexadienes which contain (CN)-, (λ⁵PS)-, (λ⁵PN)-, and (λ⁵PC)-double-bonds as 1—6 , do not undergo pericyclic reactions. Attempts to prepare other 1,6-diphosphahexadienes from the dicarbonic acid dichlorides 15—18 and the disilyphosphanes 10a—c yielded only the bicyclic compounds 19—22 . The reaction of the acid dichlorides 15—17 with phosphane 10 d yields the P-silylacylphosphanes 23—25 ; a silatropy with following Cope-rearrangement was not observed.     

α,ω-Diisocyanatocarbodiimides, -Polycarbodiimides,and Their Derivatives

Research in the field of low-molecular weight, oligomeric and polymeric α,ω-diisocyanatocarbodiimides and -polycarbodiimides has been fruitful, not only in connection with these compounds themselves, but also—as so often happens in chemistry—with quite different problems. Novel synthetic methods, discoveries concerning the properties of low-molecular weight carbodiimides and phosphane imide derivatives, as well as results on the fragmentation reactions of four-membered heterocyclic compounds containing oxygen, phosphorus, and nitrogen, and a better understanding of the diisocyanate polyaddition process are among the many by-products of this research. The “high- and low-temperature formation” of polycarbodiimides and the homogeneous and heterogeneous catalysis of this process are described, and the fundamental importance of four-membered ring fragmentation mechanisms resulting in the formation of phosphane imide derivatives is outlined. Interesting building blocks for the diisocyanate polyaddition and polycondensation processes can be synthesized by many derivatization reactions of oligomeric and high-molecular weight polycarbodiimides and polyuretonimines. The in situ production of polycarbodiimides via matrix reactions in flexible polyurethane foams leads to a cellular arrangement of the material due to the pronounced symmetrical growth processes. Combination-foams with increased carbonation tendencies are formed in this way. Attention is drawn to several industrial applications of α,ω-diisocyanatopolycarbodiimides, of high-molecular weight cross-linked polyuretonimines, and of polycarbodiimide foams.     

Stable 1,6-Diionic Phosphorus Betaines Derived from Electron-Deficient Acetylenic Compounds

The addition of triphenylphosphine to methyl propiolate, ethyl propiolate, or ethynyl methyl ketone in the presence of a strong NH-acid, such as 5-nitro-2,4-dihydro-3 H -1,2,4-triazol-3-one, leads to stable 1,6-diionic organophosphorus compounds in excellent yields.     

Two molybdenum pentacarbonyl complexes with electroneutral phosphane ligands: [bis(morpholin‐4‐yl)(pentafluoroethyl)phosphane‐κP]pentacarbonylmolybdenum(0) and pentacarbonyl[(pentafluoroethyl)bis(piperidin‐1‐yl)phosphane‐κP]molybdenum(0)

The crystal structures of the title compounds, [Mo{(C₄H₈NO)₂P(C₂F₅)}(CO)₅], (1a), and [Mo{(C₅H₁₀N)₂P(C₂F₅)}(CO)₅], (2a), were determined as part of a larger project that focuses on the synthesis and coordination chemistry of phosphane ligands possessing moderate (electroneutral, i.e. neither electron‐rich nor electron‐deficient) electronic characteristics. Both complexes feature a slightly distorted octahedral geometry at the metal center, due to the electronic and steric repulsions between two of the four equatorial CO groups and the pentafluoroethyl group attached to the phosphane ligand. Bond length and angle data for (1a) and (2a) support the conclusion that the free phosphane ligands are electroneutral. For complex (1a), the Mo—P, Mo—C_ax and Mo—C_eq(ave) bond lengths are 2.5063 (5), 2.018 (2) and 2.048 (2) Å, respectively, and for complex (2a) these values are 2.5274 (5), 2.009 (3) and 2.050 (3) Å, respectively. Geometric data for (1a) and (2a) are compared with similar data reported for analogous Mo(CO)₅ complexes.     

Synthesis,Photophysical, and Two‐Photon Absorption Properties of Elongated Phosphane Oxide and Sulfide Derivatives

A series of rod‐shaped and related three‐branched push–pull derivatives containing phosphane oxide or phosphane sulfide (PO or PS)—as an electron‐withdrawing group conjugated to electron‐donating groups, such as amino or ether groups, with a conjugated rod consisting of arylene–vinylene or arylene–ethynylene building blocks—were prepared. These compounds were efficiently synthesized by a Grignard reaction followed by Sonogashira coupling. Their photophysical properties including absorption, emission, time‐resolved fluorescence, and two‐photon absorption (TPA) were investigated with special attention to structure–property relationships. These fluorophores show high fluorescence quantum yields and solvent‐dependent experiments reveal that efficient intramolecular charge transfer occurs upon excitation, thereby leading to highly polar excited states, the polarity of which can be significantly enhanced by playing on the end groups and conjugated linker. Rod‐shaped and related three‐branched systems show similar fluorescence properties in agreement with excitation localization on one of the push–pull branches. By using stronger electron donors or replacing the arylene–ethynylene linkers with an arylene–vinylene one induces significant redshifts of both the low‐energy one‐photon absorption and TPA bands. Interestingly, a major enhancement in TPA responses is observed, whereas OPA intensities are only weakly affected. Similarly, phosphane oxide derivatives show similar OPA responses than the corresponding sulfides but their TPA responses are significantly larger. Finally, the electronic coupling between dipolar branches promoted by common PO or PS acceptor moieties induces either slight enhancement of the TPA responses or broadening of the TPA band in the near infrared (NIR) region. Such behavior markedly contrasts with triphenylamine‐core‐mediated coupling, which gives evidence for the different types of interactions between branches.     

An unexpected and easy way of freezing the configuration of a triaryl phosphane oxide

Configurationally stable triaryl phosphane oxides are important for reactions with transfer of chiral information. Apart from introducing bulky substituents to suppress fast inversion of helicity at room temperature, the use of a second chiral element which induces chirality in the triaryl phosphane oxide, so that it adopts only one configuration, is suitable. With regard to chirality transfer, C(2)-symmetric imidazole cyclopeptides were tested for obtaining a configurationally stable phosphane oxide. Density functional calculations showed almost equal energies of the three possible triaryl phosphane oxides (MMM)-1, (PPP)-1, and (MP)-1. Surprisingly, after synthesis only the MMM conformer is present in solution, and its configurational stability was proved by variable-temperature and 2D NMR experiments as well as CD measurements. In view of the results of the DFT calculations, formation of stable (MMM)-1 cannot be explained thermodynamically but by kinetic reaction control. This concept of freezing the conformation of a triaryl phosphane oxide can in future be used to easily prepare configurationally stable stereoisomeric propellerlike compounds.     

Highly diastereoselective intramolecular Diels-Alder reaction of chiral silatrienes

New Si-chiral 2-silahexa-3,5-dienyl acrylates were prepared in six steps from dichloro(chloromethyl)methylsilane. The EtAlCl₂ catalysed intramolecular Diels-Alder reaction of these compounds gave chiral 4-sila-4a,7,8,8a-tetrahydroisochroman-1-ones in good yield. Very good diastereoselectivity was observed for a silatriene bearing a methyl and a 2-methoxyphenyl substituent on the chiral silicon atom.     

Suitability of microwave-assisted extraction coupled with solid-phase extraction for organophosphorus pesticide determination in olive oil

A systematic study of the microwave-assisted extraction coupled to solid-phase extraction of nine organophosphorus pesticides (dimethoate, diazinon, pirimiphos methyl, parathion methyl, malathion, fenthion, chlorpyriphos, methidathion and azinphos methyl) from olive oil is described. The method is based on microwave-assisted liquid-liquid extraction with partition of organophosphorus pesticides between an acetonitrile-dichloromethane mixture and oil. Cleanup of extracts was performed with ENVI-Carb solid-phase extraction cartridge using dichloromethane as the elution solvent. The determination of pesticides in the final extracts was carried out by gas chromatography-flame photometric detection and gas chromatography-tandem mass spectrometry, using a triple quadrupole mass analyzer, for confirmative purposes. The study and optimization of the method was achieved through experimental design where recovery of compounds using acetonitrile for partition ranged from 62 to 99%. By adding dichloromethane to the extracting solution, the recoveries of more hydrophobic compounds were significantly increased. Under optimized conditions recoveries of pesticides from oil were equal to or higher than 73%, except for fenthion and chlorpyriphos at concentrations higher than 0.06microgg(-1) and diazinon at 0.03microgg(-1), with RSDs equal to or lower than 11% and quantification limits ranging from 0.007 to 0.020microgg(-1). The proposed method was applied to residue determination of the selected pesticides in commercial olive and avocado oil produced in Chile.     

First Total Synthesis of Bauerine C

The first total synthesis of Bauerine C, a unique indoloquinazoline alkoloid, has been achieved from readily available 2,3‐dichloroaniline. The key step is the Japp–Klingmann condensation between 2,3‐dichloroaniline and ethyl‐2‐acetyl‐5‐phthalimido pentanoate to get 3‐[(2,3‐dichlorophenyl)‐hydrozono]‐pipiridin‐2‐one, which cyclizes to 7,8‐dichloro‐2,3,4,9‐tetrahydro‐β‐carbolin‐1‐one, which can be methylated by dimethyl sulphate to give 7,8‐dichloro‐9‐methyl 2,3,4,9‐tetrahydro‐β‐carbolin‐1‐one. This N‐methyl derivative is then subjected to dehydrogenation with 2,3‐dichloro‐5,6‐dicayano‐1,4‐benzoquinone (DDQ) to give the target compound Bauerine C.     

Planarity of benzoylhydrazine–dithiocarbazoate tuberculostatics. I. N′‐Methyl‐substituted 3,4‐dichlorobenzoyl monoesters

Methyl 2‐(3,4‐dichlorobenzoyl)‐1‐methylhydrazinecarbodithioate, C₁₀H₁₀Cl₂N₂OS₂, (F1), butyl 2‐(3,4‐dichlorobenzoyl)‐1‐methylhydrazinecarbodithioate, C₁₃H₁₆Cl₂N₂OS₂, (F2), and 3,4‐dichloro‐N‐(2‐sulfanylidene‐1,3‐thiazinan‐3‐yl)benzamide, C₁₁H₁₀Cl₂N₂OS₂, (F3), were studied by X‐ray diffraction to test our hypothesis that planarity of aryloylhydrazinedithiocarbazic acid esters is a prerequisite for tuberculostatic activity. All compounds examined in this study are inactive and nonplanar due to twists along two specific bonds in the central frame of the molecules. The significant twist at the N—N bond, with an C—N—N—C(S) torsion angle of about 85°, results from repulsion caused by a methyl substituent at the N′ atom of the hydrazide group. The other twist is that within the benzoyl group at the C(O)—Ph bond, i.e. the N—C(=O)—C(phenyl)—C torsion angle: the values found in the studied structures (25–30°) are in agreement with those observed in other compounds containing a similar fragment. As some nonplanar benzoyl derivatives are active, it seems that planarity of the hydrazinedithioate fragment is more important for tuberculostatic activity than planarity of the aryloyl group.     

Hydrolysis and etherification of (o-carboranylisopropyl)dichloro(methyl)silane

The behavior of (o-carboranylisopropyl)dichloro(methyl)silane in hydrolysis and etherification reactions has been studied. (o-Carboranylisopropyl)(methyl)silanediol and (o-carboranylisopropyl)diethoxy(methyl)silane have been obtained for the first time and characterized.     

Hydrosilylation of methylenecyclopropane and methylenecyclobutane with dichloro(methyl)silane and synthesis of novel acetylenic silahydrocarbons from the reaction products

Hydrosilylation of methylenecyclopropane with dichloro(methyl)silane involves not only addition to the multiple bond, but also results in opening of the three-membered ring to form dichloro(cyclopropylmethyl)methylsilane and 1,4-bis(dichloromethylsilyl)butane. Dichloro(cycloalkylmethyl)methylsilanes were converted into the corresponding (cycloalkylmethyl)(diethynyl)methylsilanes by reaction with ethynylmagnesium bromide. The reaction of bis(bromomagnesioethynyl)(cyclobutylmethyl)methylsilane with dichlorodimethylsilane leads to cyclotetrasilaethyne framed with methyl and cyclobutyl groups. From 1,4-bis-[dichloro(methyl)silyl]butane and bis[(bromomagnesioethynyl)dimethylsilyl]ethyne or -ethene, 22-membered macrobicyclic highly unsaturated silahydrocarbons with an endocyclic tetramethylene bridge were synthesized.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 10, 2004, pp. 1608–1611.Original Russian Text Copyright © 2004 by O. Yarosh, Zhilitskaya, N. Yarosh, Albanov, Voronkov.This revised version was published online in April 2005 with a corrected cover date.     

Validation of an SPME method,using PDMS,PA, PDMS-DVB,and CW-DVB SPME fiber coatings,for analysis of organophosphorus insecticides in natural waters

Solid-phase microextraction (SPME) has been optimized and applied to the determination of the organophosphorus insecticides diazinon, dichlofenthion, parathion methyl, malathion, fenitrothion, fenthion, parathion ethyl, bromophos methyl, bromophos ethyl, and ethion in natural waters. Four types of SPME fiber coated with different stationary phases (PDMS, PA, PDMS-DVB, and CW-DVB) were used to examine their extraction efficiencies for the compounds tested. Conditions that might affect the SPME procedure, such as extraction time and salt content, were investigated to determine the analytical performance of these fiber coatings for organophosphorus insecticides. The optimized procedure was applied to natural waters - tap, sea, river, and lake water - spiked in the concentration range 0.5 to 50 micro g L(-1) to obtain the analytical characteristics. Recoveries were relatively high - >80% for all types of aqueous sample matrix - and the calibration plots were reproducible and linear (R(2)>0.982) for all analytes with all the fibers tested. The limits of detection ranged from 2 to 90 ng L(-1), depending on the detector and the compound investigated, with relative standard deviations in the range 3-15% at all the concentration levels tested. The SPME partition coefficients (K(f)) of the organophosphorus insecticides were calculated experimentally for all the polymer coatings. The effect of organic matter such as humic acids on extraction efficiency was also studied. The analytical performance of the SPME procedure using all the fibers in the tested natural waters proved effective for the compounds.     

Reduction of Activated Alkenes by PIII/PV Redox Cycling Catalysis

The carbon–carbon double bond of unsaturated carbonyl compounds was readily reduced by using a phosphetane oxide catalyst in the presence of a simple organosilane as the terminal reductant and water as the hydrogen source. Quantitative hydrogenation was observed when 1.0 mol % of a methyl‐substituted phosphetane oxide was employed as the catalyst. The procedure is highly selective towards activated double bonds, tolerating a variety of functional groups that are usually prone to reduction. In total, 25 alkenes and two alkynes were hydrogenated to the corresponding alkanes in excellent yields of up to 99 %. Notably, less active poly(methylhydrosiloxane) could also be utilized as the terminal reductant. Mechanistic investigations revealed the phosphane as the catalyst resting state and a protonation/deprotonation sequence as the crucial step in the catalytic cycle.