Synthesis of Peroxy Bond Containing Acetylene Alcohols,Ethers, and Esters,Derivatives of 2-Octanone

A synthesis was developed of 2,5-dimethyl-2-tert-alkylperoxy-5-lithiumoxy-3-undecynes by treating the corresponding peroxyalkynes with butyllithium followed by reaction of the arising lithium peroxyacetylides with 2-octanone. The lithium peroxyalcoholates undergo hydrolysis with water to furnish peroxy bond containing alcohols. They also react with methyl and ethyl iodides, alkyl and benzyl bromides in the presence of hexamethylphosphoramide to afford the corresponding 2,5-dimethyl-2-tert-alkylperoxy-5-alkyl(benzyl)oxy-3-undecynes, with benzoyl chloride they yield peroxy bond containing benzoates. The thermal stability of the peroxides obtained was estimated by derivatography.     

Evaluation of Initiators and Fillers in Diallyl Phthalate Resins by Differential Scanning Calorimetry

Seven organic peroxide initiators for the polymerization of diallyl-o-phthalate prepolymers were studied using differential scanning calorimetry. Included were t-butyl perbenzoate, dicumyl peroxide, α,α′-bis(t-butyl peroxy) diisopropyl-benzene, 2,5-dimethyl-2,5-di(t-butyl peroxy) hexane, 2,5-dimethyl-2,5-di(t-butyl peroxy)hexyne-3, di-t-butyl peroxide, and t-butyl hydroperoxide. Heats of reaction and reaction rate constants are presented for each initiator at 1, 2, 3, and 4 phr of diallyl-o-phthalate prepolymers. The differences in reaction temperature and rate are discussed. Effects of four types of commonly used fillers (asbestos floats, ground quartz, calcium silicate, and clay) on the heats of reaction of diallyl-o-phthalate prepolymers using t-butyl perbenzoate and dicumyl peroxide initiators show the large inhibiting effect of untreated kaolinite clays on this polymerization.     

Peroxy-Containing Acetylenic Alcohols and Ethers Derived from 4-Methoxybenzophenone and 1- and 2-Acetonaphthones

A procedure was suggested for the synthesis of 2,5-dimethyl-2-tert-alkylperoxy-5-lithiooxy-5-methyl(phenyl)-5-naphthyl(aryl)alk-3-ynes by the reactions of the corresponding monosubstituted peroxyalkynes with butyllithium, followed by the reactions of the resulting lithium peroxy acetylenides with 4-methoxybenzophenone and 1- and 2-acetonaphthones. Lithium peroxy alcoholates are hydrolyzed with water to form peroxy-containing alcohols and react with methyl iodide in the presence of dimethyl sulfoxide to form the corresponding 2,5-dimethyl-2-tert-alkylperoxy-5-methoxy-5-methyl(phenyl)-5-naphthyl(aryl)alk-3-ynes. The thermal stability of the peroxides prepared was evaluated by thermal analysis.     

Reactions of perfluorinated 1-ethyltetrahydronaphthalene, 1-ethylindan, and 1,1-diethylindan with pentafluorobenzene in antimony pentafluoride

The reaction of perfluoro(1-ethyltetrahydronaphthalene) with pentafluorobenzene in SbF₅, followed by treatment of the reaction mixture with water, afforded a mixture of 1-hydroxyperfluoro(1-phenyl-4-ethyletetrahydronaphthalene) and perfluoro(5-phenyl-8-ethyl-2,6,7,8-tetrahydronaphthalen-2-one). From perfluoro(1,1-diethylindan), 1-hydroxyperfluoro(1,1-diethyl-3-phenylindan) was obtained. Perfluoro(1-ethylindan) reacted with an equimolar amount of pentafluorobenzene in SbF₅ to give (after hydrolysis) 1-hydroxyperfluoro-(3-ethyl-1-phenylindan), 1-hydroxyperfluoro(3-ethyl-1,3-diphenylindan), and perfluoro(1-ethyl-1-phenylindan), while in the reaction with excess pentafluorobenzene, followed by treatment with anhydrous hydrogen fluoride, perfluoro(1-ethyl-3-phenylindan) and perfluoro(1-ethyl-1,3-diphenylindan) were formed.     

The alicyclic ring contraction of perfluoro-1-phenyltetralin in reaction with antimony pentafluoride

Perfluoro-1-phenyltetralin (1) heated with antimony pentafluoride at 130 °C, then treated with water, gave a mixture of perfluorinated 3-methyl-2-phenylindenone (3), 3-methyl-2-phenylindene (4), 3-hydroxy-1-methyl-3-phenylindan (5), 1-methyl-3-phenylindan (6), 9-methyl-1,2,3,4,5,6,7,8-octahydroanthracene (7), and 1,9-dimethyl-5,6,7,8-tetrahydro-β-naphthindan (8). When heated with SbF₅ in the presence of HF, then treated with water, compound 1 is transformed to a mixture of products 3-6. The reaction at 170 and 200 °C forms compounds 3-6 together with perfluoro-2-(cyclohexen-1-yl)-3-methylindene (10).     

1,1,3-Trimethyl-3-phenylindan as a Luminescent Additive to a Plastic Scintillator Based on Poly(methyl Methacrylate)

The luminescence and scintillation properties of poly(methyl methacrylate) containing 1,1,3-trimethyl-3-phenylindan were studied.     

The role of hydroperoxides in photo-oxidative degradation of cis-1,4-polybutadiene

Hydroperoxides undergo various types of homolytic reactions on exposure to u.v. radiation. Free radicals formed from the photodecomposition of the hydroperoxide group (OOH) are oxy (HO.) and peroxy (HOO.) radicals which participate in further reactions. In cis-1,4-polybutadiene, they may initiate free radical oxidations. Cleavage of alkoxy (RO.) radicals and crosslinking of polymer radicals through polymer peroxides in the presence of air in solid film nearly balance. Most polymer radicals produced in the absence of oxygen undergo cross-linking but form peroxy radicals (POO.) in its presence. This paper presents results on the photodecomposition of tert-butyl hydroperoxide, cumyl hydroperoxide and 2,5-dimethyl-2,5-dihydroperoxyhexane in cis-1,4-polybutadiene in film and in solution.     

Temperature-controlled highly selective dimerization of α-methylstyrene catalyzed by Brönsted acidic ionic liquid under solvent-free conditions

A temperature-controlled highly selective dimerization of α-methylstyrene to produce 2,4-diphenyl-4-methyl-1-pentene and 1,1,3-trimethyl-3-phenylindan was catalyzed by Brönsted acidic ionic liquid [Hmim]⁺BF₄⁻. At 60 °C, 2,4-diphenyl-4-methyl-1-pentene was formed in 93% selectivity with >92% conversion under a solvent-free condition while 1,1,3-trimethyl-3-phenylindan could be obtained in 100% selectivity when the reaction temperature was increased to 170 °C. The ionic liquid [Hmim]⁺BF₄⁻ could be reused with almost no loss of activity.     

Inhibiting action of sulfur-containing hydroquinolines during polymerization of vinyl monomers

4,5-Dihydro-4,4-dimethyl-2,3-dithiolo[5,4-c]quinoline-1-thiones and gossypol are effective antioxidants in the polymerization of vinyl monomers. Kinetic parameters of inhibition reactions depend on the structure of the monomer and inhibitor and the nature of the initiator. A mechanism is proposed for the reaction of peroxy radicals with sulfur-containing hydroquinolines.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 782–786, April, 1991.     

Computational study on the existence of organic peroxy radical-water complexes (RO2.H2O)

The existence of a series of organic peroxy radical-water complexes [CH3O2.H2O (methyl peroxy); CH3CH2O2.H2O (ethyl peroxy); CH3C(O)O2.H2O (acetyl peroxy); CH3C(O)CH2O2.H2O (acetonyl peroxy); CH2(OH)O2.H2O (hydroxyl methyl peroxy); CH2(OH)CH2O2.H2O (2-hydroxy ethyl peroxy); CH2(F)O2.H2O (fluoro methyl peroxy); CH2(F)CH2O2.H2O (2-fluoro ethyl peroxy)] is evaluated using high level ab initio calculations. A wide range of binding energies is predicted for these complexes, in which the difference in binding energies can be explained by examination of the composition of the R group attached to the peroxy moiety. The general trend in binding energies has been determined to be as follows: fluorine approximately alkyl < carbonyl < alcohol. The weakest bound complex, CH3O2.H2O, is calculated to be bound by 2.3 kcal mol-1, and the strongest, the CH2(OH)O2.H2O complex, is bound by 5.1 kcal mol-1. The binding energy of the peroxy radical-water complexes which contain carbonyl and alcohol groups indicates that these complexes may perturb the kinetics and product branching ratios of reactions involving these complexes.     

Absorption and Luminescence Spectra of 1,1,3-Trimethyl-3-Phenylindan

Electronic absorption and luminescence spectra of cyclic dimer of -methylstyrene, 1,1,3-trimethyl-3-phenylindan, were described. The quantum yield and lifetime of fluorescence were determined.     

On the susceptibility of organic peroxy bonds to hydride reduction

Reduction of organic molecules that contain a peroxy bond is broadly considered as a "risky" and uncertain operation when cleavage of the peroxy linkage is not desired. For this reason, such reduction steps are normally avoided at the planning stage of the synthesis when possible. As a natural consequence, the information in the literature about the susceptibility of organic peroxy bonds to reducing species is scant. In this work the tolerance of organic peroxy bonds to some common hydride reductants was examined systematically for the first time. Using reduction of ester group to alcohol as a probe, LiAlH(4), LiAlH(O(t)()Bu)(3), LiBHEt(3), and LiBH(4) were found to be significantly better than other reductants examined when taking into consideration both the completeness of the reduction of ester groups and the peroxy bond survival rate. LiBH(4) appeared to be the most suitable reductant for the reduction under discussion, not only because of the high reduction yields/excellent compatibility with peroxy bonds, but also because of the advantages in practical aspects. The results disclosed herein may (hopefully) provide a handy reference for dealing with reduction of other peroxy bond-containing molecules in the future.     

Polymers with indan units

Cationic polymerisation of 1, 4-diisopropenyl benzene, 1, 4-(2-chloro-isopropyl)benzene and related compounds yields soluble polymers with repeating units of indan. High performance polymers with indan units are available via nucleophilic substitution of halogenated aromatic monomers containing a central indan element, which are synthesized from 1, 1, 3-trimethyl-3-phenylindan via Friedel-Crafts-reaction with corresponding halogenated acyl- and sulfonyl chlorides.     

Peroxy acid epoxidation of acyclic allylic alcohols. Competition between s-trans and s-cis peroxy acid conformers

[Reaction: see text]. RB3LYP calculations, reported here, indicate that peroxy acid s-cis conformer is more stable than its s-trans counterpart, in agreement with experimental data. Difference in stability is the highest in the gas phase, but it falls considerably on going from the gas phase to moderately polar solvent. In the case of peroxy formic acid, the enthalpy (free energy) difference is about 3.4 (2.5) kcal/mol, respectively, in the gas phase but decreases to 1.2 (0.6) kcal/mol in dichloromethane solution. Introduction of an alkyl or aryl substituent on the peroxy acid, that is, on passing to peroxy acetic, peroxy benzoic (PBA), and m-chloroperoxy benzoic acid (MCPBA), adds a further significant (1.0-1.5 kcal/mol) favor to the s-cis isomer. RB3LYP/6-31+G(2d,p) calculations on the epoxidation of 2-propenol with peroxy formic and peroxy benzoic acids, respectively, suggest that the less stable peroxy acid s-trans conformer can compete with the more stable s-cis form in epoxidation reaction of these substrates. Transition structures arising from s-trans peroxy acids ("trans" TSs) retain both the well-established, for "cis" TS, perpendicular orientation of the O-H peroxy acid bond relative to the C=C bond and the one-step oxirane ring formation. These TSs collapse to the final epoxide via a 1,2-H shift at variance with the 1,4-H transfer of the classical Bartlett's "cis" mechanism. The "trans" reaction pathways have a higher barrier in the gas phase than the "cis" reaction channels, but in moderately polar solvents they become competitive. In fact, the "trans" TSs are always significantly more stabilized than their "cis" counterparts by solvation effects. Calculations also suggest that going from peroxy formic to peroxy benzoic acid should slightly disfavor the "trans" route relative to the "cis" one, reflecting, in an attenuated way, the decrease in the peroxy acid s-trans/s-cis conformer ratio. The predicted behavior for MCPBA parallels that of PBA acid.     

2-Phenyl-5-(4-Biphenylyl)-1,3,4-Oxadiazole and 2-(4'-tert-Butylphenyl-5)-(4'biphenylyl)-1,3,4-Oxadiazole in a Polymethyl Methacrylate Based Plastic Scintillator

The fluorescence intensity was studied for the scintillation formulation including 1,1,3-trimethyl-3-phenylindan and 2-phenyl-5-(4-biphenylyl)-1,3,4-oxadiazole, 2-(4'-tert-butylphenyl-5-(4"-biphenylyl)-1,3,4-oxadiazole, and 1,4-di(5-phenyl-2-oxazolyl)benzene. The scintillation efficiency was determined for the polymethyl methacrylate based plastic scintillator containing the above-listed compounds as luminescent additives.     

Epoxidation of acyclic chiral allylic alcohols with peroxy acids: spiro or planar butterfly transition structures? A computational DFT answer

The mechanism of the epoxidation of two chiral allylic alcohols, i.e., 3-methyl-3-buten-2-ol and (Z)-3-penten-2-ol, with peroxyformic acid has been investigated by locating 20 transition structures with the B3LYP/6-31G* method and by evaluating their electronic energy also at the B3LYP/6-311+G**@B3LYP/6-31G* theory level. Relative stability of TSs, as far as electronic energy is concerned, is basis set dependent; moreover, it also depends on entropy and solvent effects. Free enthalpies, calculated by using electronic energy at the higher theory level and with inclusion of solvent effects, indicates that syn, exo TSs, where the olefinic OH group hydrogen bonds the peroxy oxygens of the peroxy acid, outweigh syn, endo TSs, where the peroxy acid carbonyl oxygen is involved in hydrogen bonding. In the former TSs the peroxy acid moiety maintains its planar geometry while in the latter ones a strong out-of-plane distortion of peroxy acid is observed. This distortion makes it viable an unprecedented 1,2-H shift, as a possible alternative to the 1,4-H shift, for the peroxy acid hydrogen. In fact, for one syn, endo TS IRC analysis demonstrated that the 1,2-H shift mechanism is actually operative. The geometry of all TSs substantially conforms to a spiro (i.e., with the peroxy acid plane almost perpendicular to the C=C bond axis) butterfly orientation of the reactants while no TS resembles, even loosely, the planar butterfly structure. Theoretical threo/erythro epoxide ratios are in fair accord with experimental data. Calculations indicate that threo epoxides derive mostly from TSs in which the olefinic OH assumes an outside conformation while erythro epoxides originate from TSs with the OH group in an inside position. Computational findings do not support the qualitative TS models recently proposed for these reactions.     

The use of SSA fractionation to detect changes in the molecular structure of model ethylene-butene copolymers modified by peroxide crosslinking

Four model ethylene-butene copolymers of different molecular weights modified with various concentrations of peroxide were analyzed by a DSC based successive self annealing method. The original copolymers had the same intra and intermolecular homogeneous branching distribution along the linear chains with approximately 2.4% mol of ethyl branches. The copolymers with average molecular weights of 29,000, 45,000, 81,000 and 125,000 g/mol were modified with different amounts of 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (DBPH) as a crosslinking initiator. The molecular changes induced by the reaction with the peroxide affect the semicrystalline structure of the material. Variations in the crystal thickness distributions of the material as a consequence of the modification are related to the peroxide induced free radical reactions.     

Role of hydrogen bonding in the oxidation of thianthrene 5-oxide with peroxy acids.

The oxidation of thianthrene 5-oxide, i.e., a mechanistic probe for the assessment of the electronic character of various oxidants, with peroxybenzoic acids in various oxygen bases as solvents was investigated. The nucleophilicity (X(SO)) of peroxy acids was increasing with increasing basicity of the oxygen base. A good linear correlation was observed by plotting X(SO) values vs either the Kamlet-Taft beta values or the OOH (1)H NMR chemical shifts of m-chloroperoxybenzoic acid (m-CPBA) in solvents of various basicity. These observations, together with the results of IR and (1)H NMR spectroscopic studies of peroxybenzoic acids, and DFT (B3LYP/6-311++G) studies of the intramolecular hydrogen bonding in peroxyformic, peroxyacetic, and m-CPBA, as well as the intermolecular hydrogen bonding in the complexes of the these peroxy acids with dimethyl ether as a model oxygen base, support the involvement of the peroxy acid-oxygen base complexes in the transition states of these reactions. The increased nucleophilicity (X(SO)) of peroxy acids in basic solvents is most likely due to the increased negative charge on the terminal "electrophilic" peroxycarboxylic oxygen atom (OH), and/or the increased LUMO and HOMO energies of the peroxy acid in the complexes, as compared to those parameters in the intramolecularly hydrogen-bonded form of peroxy acids, believed to be operative in inert solvents.     

Origin of substituent effects in the absorption spectra of peroxy radicals: time dependent density functional theory calculations.

We investigate the assignment of electronic transitions in alkyl peroxy radicals. Past experimental work has shown that the phenyl peroxy radical exhibits a transition in the visible region; however, previous high level calculations have not reproduced this observed absorption. We use time dependent density functional theory (TDDFT) to characterize the electronic excitations of the phenyl peroxy radical as well as other hydrocarbon substituted peroxy radicals. TDDFT calculations of the phenyl peroxy radical support an excitation in the visible spectrum. Further, we investigate the nature of this visible absorption using electron attachment/detachment density diagrams of the peroxy radicals and present a qualitative picture of the origin of the visible absorption based on molecular orbital perturbations. The peroxy radical substituent is also compared against isoelectronic radical groups. The visible absorption is determined to be dependent on mixing of the alkyl and radical substituent orbitals.     

Computations on the A-X transition of isoprene-OH-O2 peroxy radicals

Calculations are carried out on the A state of HO2, CH3O2, and CH3CH2O2 and 10 isomers and conformers of the isoprene-OH-O2 peroxy radicals derived from OH addition to isoprene (2-methyl-1,3-butadiene). In addition to calculating vertical and adiabatic excitation energies, we consider the effect of excitation on molecular structure, and examine the OO stretching frequencies, which are known to be major features in the absorption spectra of the A states of the smaller radicals. The two methods used are the configuration interaction with single excitations (CIS) method and time-dependent density functional theory (TD-DFT), both with a range of basis sets up to 6-311++G(2df,2pd). TD-DFT overestimates excitation energies considerably, while CIS tends to underestimate them slightly. TD-DFT does seem to capture the trend in excitation energy vs. size for the smaller peroxy radicals. Conformation and configuration strongly affect the excitation energies of the peroxy radicals from isoprene. CIS calculations indicate that the intramolecular OH--O hydrogen bonds, present in the ground state of some peroxy radicals from isoprene, are weakened or broken in the excited state, while TD-DFT calculations suggest they are retained.