Gas-phase pyrolysis in heterocyclic synthesis. Gas-phase elimination reactions of some substituted aminoazoles

Gas-phase pyrolyses of ethyl N-(5-cyanomethyl-1,3,4-thiadiazol-3-yl)carbamate ( 1 ), 1-benzoyl-3-(3-methylpyrazol-5-yl)thiourea ( 2 ), 1-benzoyl-3-(5-methylisoxazol-3-yl)thiourea ( 3 ), and 1-acetyl-3-(3-phenyl-pyrazol-5-yl)thiourea ( 4 ) have been studied. These reactions were homogeneous and unimolecular. The kinetics obeyed the first-order rate equation. Utilization of this pyrolytic reaction in heterocyclic synthesis is considered, and mechanistic information has been obtained from kinetic data and product analysis using an on-line pyrolysis GC-MS technique. The physical constants of four new substituted aminoazoles are also described. © 1997 John Wiley & Sons, Inc.     

Gas-phase pyrolysis mechanism and kinetics of 3-t-butoxyquadricyclane

The gas-phase pyrolysis of 3-t-butoxyquadricyclane [1] was investigated over the temperature range 511–542 K at one atm in helium. The initial pyrolysis step is the isomerization of 3-t-butoxyquadricyclane to 7-t-butoxynorbornadiene (Ea = 38.49 ± 0.85 kcal/mole, log A = 15.44 ± 0.35). 7-t-butoxynorbornadiene exhibits a single unimolecular reaction pathway which produces a mixture of t-butoxycycloheptatrienes (Ea = 38.44 ± 0.63 kcal/mole, log A = 15.05 ± 0.26). This two-step mechanism affords fewer reactions than unsubstituted quadricyclane in the gas phase and could be useful for its reduced sooting potential. © 1996 John Wiley & Sons, Inc.     

Gas-phase pyrolysis of bis(phenylthio) acetylene

Conclusions The main products of the gas-phase pyrolysis of bis(phenylthio)acetylene in either benzene or toluene at 560° are diphenyl sulfide, thiophenol, and acetylene. Benzothiophene and thianthrene are also formed here. The yield of diphenyl sulfide increases when bis (phenylthio)acetylene is copyrolyzed with chlorobenzene (580°).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No.5, pp. 1188–1190, May, 1983.     

Gas-phase pyrolysis mechanism and kinetics of 3-chloroquadricyclane

The gas-phase pyrolysis of 3-chloroquadricyclane [1] was investigated over the temperature range 513–550 K at one atm in helium. The initial pyrolysis step is the isomerization of 3-chloroquadricyclane to 7-chloronorbornadiene (E_a=39.63±1.40 kcal/mole, log A=15.18±0.58). 7-chloronorbornadiene rearranges (623–660 K) to exclusively produce benzyl chloride (E_a=48.05±1.10 kcal/mole, log A=15.82±0.38). This two step mechanism affords fewer reactions than the unsubstituted quadricyclane system in the gas phase. The production of a benzene derivative from the chlorinated norbornadiene is a reaction pathway contained in the unsubstituted norbornadiene and other 7-substituted pyrolysis mechanisms. © 1997 John Wiley & Sons, Inc.     

Gas-phase pyrolysis of 2,2,3,3-tetramethylbutane using a wall-less reactor

The pyrolysis of 2,2,3,3-tetramethylbutane (TMB) has been studied using the wall-less reactor. Under homogeneous conditions up to 670°C, the activation energy is 43.2 kcal/mol and log A is 10.70. The products are 2-methylpropene, hydrogen, propene, 2-methyl-2-butene, ethane, ethene, methane, neopentane, and 2,3-dimethyl-2-butene in order of abundance. Addition of toluene, cyclopentadiene, or nitrous oxide to the system increases both the activation energy and the A factor; whereas oxygen decreases both the activation energy and the A factor. Incorporation of stainless-steel rods to provide surface has only a modest effect upon the rate. In view of this evidence, it appears that the homogeneous pyrolysis of TMB at higher pressures is a chain reaction under the described conditions.     

Gas-phase pyrolysis of benzimidazole derivatives: novel route to condensed heterocycles

Gas-phase pyrolysis of N-(1H-benzimidazol-2-yl)-N′-arylidenehydrazines 1a-e gave the corresponding arylnitriles 2a-e, 2-aminobenzimidazole 3, 2,4,5-triphenylimidazole 4, 1,3-diphenyl-8H-2,3a,8-triazacyclopenta[a]indene 5, and 5,11-diphenyl-6H,12H-dibenzimidazo[1,2-a];1’,2’-d]pyrazine 6. The kinetics and analysis of the products of reaction are reported and used to elucidate the mechanism of the elimination process.     

Modelling of the homogeneously catalyzed and uncatalyzed pyrolysis of neopentane: Thermochemistry of the neopentyl radical

The mechanism for neopentane (NpH) pyrolysis in the absence and presence of additives isobutene, HCl and HBr, in the temperature range 750–800 K, has been reinvestigated with the aid of computer simulation and sensitivity analysis techniques. With best values assigned to all rate constants in the kinetic chain, a basic mechanism comprising 18 reversible reactions involving 19 atomic, radical, and molecular species has been used to simulate pure neopentane pyrolysis data. Predictions of major and minor product yields provided quantitative agreement with experimental data against which the model was tested. The mechanism was supplemented by additional species and reactions in order to simulate experimental neopentane pyrolysis data in the presence of HCl and HBr additives. An apparent discrepancy between a recent direct measurement of k₅, the rate constant for thermal decomposition of the neopentyl radical [1], and that reported from studies of neopentane pyrolysis in the presence and absence of HCl [2], has been identified as being due to the use of an incomplete mechanism in the latter determination. Simulations of hydrogen halide catalyzed pyrolyses exhibit a high sensitivity to the thermochemical parameters associated with the neopentyl radical (Np). The influence of uncertainties in ΔH(Np) and S(Np) are evaluated and lead to suggested values ΔH(Np) = 8.7 ± 0.8 kcal mol^?1 and S(Np) = 78.8 ± 1.0 cal mol^?1 K^?1. © 1993 John Wiley & Sons, Inc.     

Stereochemistry of neopentyl systems

Methods for the synthesis, determination of enantiomeric purity and absolute configuration of primary 1-deuterio alcohols (RCHDOH) are outlined and tabulated. Studies on the rearrangements, solvolyses and S_N2 reactions of chiral neopentyl-1-d derivatives are reviewed. Finally, the optical rotatory properties of the (CH₃)₃CCHDX compounds, with their unique symmetry properties, are summarized and discussed.     

Gas-phase thermolysis of sulfur compounds. Part VIII. Chloromethyl allyl,cyanomethyl allyl, 1-cyanoethyl allyl and neopentyl allyl sulfides

The pyrolyses of four alkyl allyl sulfides with substituents on the α? C atom of the alkyl moiety have been studied in a stirred-flow system over the temperature range 340-400°C and pressures between 2 and 12 torr. The only products formed are propene and thioaldehydes. The reactions showed first-order kinetics with the rate coefficients following the Arrhenius equations: Chloromethyl allyl sulfide: Cyanomethyl allyl sulfide: 1-cyanoethyl allyl sulfide: Neopentyl allyl sulfide: The effects of these and other substituents on the reactivity is discussed in relation with the stabilization of a polar six-centered transition state. The results support a non-concerted mechanism where the 1–5 α? H atom shift is assisted by its acidic character.     

Gas-phase detection of HSOH: synthesis by flash vacuum pyrolysis of di-tert-butyl sulfoxide and rotational-torsional spectrum

Gas-phase oxadisulfane (HSOH), the missing link between the well-known molecules hydrogen peroxide (HOOH) and disulfane (HSSH), was synthesized by flash vacuum pyrolysis of di-tert-butyl sulfoxide. Using mass spectrometry, the pyrolysis conditions have been optimized towards formation of HSOH. Microwave spectroscopic investigation of the pyrolysis products allowed-assisted by high-level quantum-chemical calculations--the first measurement of the rotational-torsional spectrum of HSOH. In total, we have measured approximately 600 lines of the rotational-torsional spectrum in the frequency range from 64 GHz to 1.9 THz and assigned some 470 of these to the rotational-torsional spectrum of HSOH in its ground torsional state. Some 120 out of the 600 lines arise from the isotopomer H(34)SOH. The HSOH molecule displays strong c-type and somewhat weaker b-type transitions, indicating a nonplanar skew chain structure, similar to the analogous molecules HOOH and HSSH. The rotational constants (MHz) of the main isotopomer (A=202 069, B=15 282, C=14 840), determined by applying a least-squares analysis to the presently available data set, are in excellent agreement with those predicted by quantum-chemical calculations (A=202 136, B=15 279, C=14 840). Our theoretical treatment also derived the following barrier heights against internal rotation in HSOH (when in the cis and trans configurations) to be V(cis) approximately equal to 2216 cm(-1) and V(trans) approximately equal to 1579 cm(-1). The internal rotational motion results in detectable torsional splittings that are dependent on the angular momentum quantum numbers J and K(a).     

Gas-phase basicity of methionine

Proton affinity and protonation entropy of methionine (Met) were determined by the extended kinetic method from ESI-Q-TOF tandem mass spectrometry experiments. The values, PA(Met) = 937.5 +/- 2.9 kJ mol(-1) and Delta(p)S degrees (Met) = - 22 +/- 5 J mol(-1) K(-1), lead to gas-phase basicity GB(Met) = 898.2 +/- 3.2 kJ.mol(-1). Quantum chemical calculations using density functional theory confirm that the proton affinity of Met is indeed in the 940 kJ mol(-1) range and that a significant entropy loss, of at least - 25 J mol(-1) K(-1), occurs upon protonation. This last point is evidenced here for the first time and suggests revision of the tabulated protonation thermochemistry of Met. A comparison with previous experimental data allows us to propose the following evaluated thermochemical values: PA(Met) = 943 +/- 4 kJ mol(-1) and Delta(p)S degrees (Met) = - 35 +/- 15 J mol(-1) K(-1) and GB(Met) = 900 +/- 2 kJ mol(-1).     

Gas-phase acidities of diols

The gas-phase acidities of several α, ω-alkanediols were measured with the equilibrium method in an ion cyclotron resonance spectrometer. The values obtained imply cyclization of the structures via an intramolecular hydrogen bond. The results are in quantitative disagreement with those obtained by the method of dissociation of the excited dimer species; care must be used in applying that method to ensure that all of the criteria for relating kinetics to equilibria are met.     

Gas-phase basicities of polyamines

The gas-phase basicities of a group of multidentate polyamines have been determined by the bracketing method and range from 966 to 1021 kJ/mol. The compounds studied vary in the number and kind of basic sites, the number and orientation of carbon atoms, and the degree of flexibility. These important structural features were analyzed to understand the observed trends in basicity and semiempirical calculations were undertaken that support the experimental trends. The polyamines may find use as reference compounds for future gas-phase basicity measurements of larger, biologically active molecules such as peptides and proteins.     

Reaction of polychlorinated biphenyls and benzenes with neopentyl glycol

The reactions of a mixture of 1,2,3- and 1,2,4-trichlorobenzene and polychlorinated biphenyls congeners of the industrial mixture Sovol with neopentyl glycol in the presence of alkali in DMSO medium was studied. In the conditions of nucleophilic substitution the aromatic compounds are converted completely. Using the method of gas chromatography with flame ionization and mass spectrometric detectors the structure of all synthesized compounds was studied and the following series of increasing reactivity of the polychlorinated biphenyls congeners was revealed: tetra- < penta- < hexachlorobiphenyls. The process can serve as a preliminary step of the preparation of industrial waste for the subsequent biological degradation.     

Formation of sulfines in the peroxyacid oxidation of neopentyl neopentanethiolsulfinate

Low temperature ¹H NMR and ¹³C NMR, and IR suggest that the $\text{m}$-chloroperbenzoic acid (MCPBA) oxidation of neopentyl neopentanethiolsulfinate leads to the formation of (E)- and (Z)-2,2-dimethylpropanethial S-oxide, neopentyl neopentanethiolsulfonate, and other products.     

水基多组分体系中新戊二醇的定量分析

新戊二醇(NPG)分子结构中含有两个对称的伯羟基易于快速参与酯化、缩合和氧化等多种化学反应.而β位置上没有氢原子的特定新戊基结构使其具有很高的化学稳定性和热稳定性,也使其衍生物具有优异性能.新戊二醇主要用于生产饱和聚酯树脂,其衍生物广泛用于涂料、汽车、纺织、制药等领域.     

Gas-phase thermolysis of benzotriazole derivatives. Part 3: Kinetic and mechanistic evidence for biradical intermediates in pyrolysis of aroylbenzotriazoles and related compounds

Gas-phase pyrolysis (static and FVP) of 1-aroylbenzotriazoles gave the corresponding substituted benzoxazole, benzimidazole, benzamide, N-phenylbenzamide, phenanthridin-6(5H)-one derivatives and 1-cyanocyclopentadiene. The present kinetic and mechanistic findings also provide further evidence of the involvement of biradical or carbene reactive intermediates in the reaction pathway of gas-phase pyrolysis of benzotriazoles.