Theoretical study of the electron transfer reaction of hydrazine with cobalt(II) phthalocyanine and substituted cobalt(II) phthalocyanines

A theoretical model is proposed to explain the trend in reactivity of cobalt(II) phthalocyanine (CoPc) and substituted cobalt(II) phthalocyanines for the oxidation of hydrazine. Our study suggests that the reaction occurs via a through bond charge transfer pathway and not via a through space charge transfer pathway as was shown in previous work for the oxidation of 2-mercaptoethanol by CoPc (G.I. Cárdenas-Jirón and D.A. Venegas-Yazigi, J. Phys. Chem. A. 106, 11398 (2002)). We propose a mechanism for the oxidation of hydrazine based on a four-step energy profile which agrees with a mechanism proposed for the electro-oxidation of hydrazine mediated by cobalt phthalocyanines confined on a graphite electrode. We show that the step in the energy profile that involves formation of a radical of hydrazine seems to be a good starting point for the study of the transfer of the first electron in the oxidation of hydrazine mediated by different substituted cobalt(II) phthalocyanines.     

An electrochemiluminescent biosensor for glucose based on the electrochemiluminescence of luminol on the nafion/glucose oxidase/poly(nickel(II)tetrasulfophthalocyanine)/multi-walled carbon nanotubes modified electrode

A poly(nickel(II) tetrasulfophthalocyanine)/multi-walled carbon nanotubes composite modified electrode (polyNiTSPc/MWNTs) was fabricated by electropolymerization of NiTSPc on MWNTs-modified glassy carbon electrode (GCE). The modified electrode was found to be able to greatly improve the emission of luminol electrochemiluminescence (ECL) in a solution containing hydrogen peroxide. Glucose oxidase (GOD) was immobilized on the surface of polyNiTSPc/MWNTs modified GC electrode by Nafion to establish an ECL glucose sensor. Under the optimum conditions, the linear response range of glucose was 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol L⁻¹ (defined as the concentration that could be detected at the signal-to-noise ratio of 3). The ECL sensor showed an outstanding well reproducibility and long-term stability. The established method has been applied to determine the glucose concentrations in real serum samples with satisfactory results.     

Degradation of substituted phenols with different oxygen sources catalyzed by Co(II) and Cu(II) phthalocyanine complexes

Research on substituted phenol degradations has received substantial attention. In this work, effective Co(II) and Cu(II) phthalocyanine complexes as catalysts were studied to degrade toxic phenols to harmless products. The effect of various process parameters, such as initial concentration of phenol, catalyst, oxygen sources, and temperature on the degradation reaction was investigated to achieve maximum degradation efficiency. The catalytic activities of Co(II) and Cu(II) phthalocyanines were evaluated for oxidation of phenolic compounds such as p-nitrophenol, o-chlorophenol, 2,3-dichlorophenol, and m-methoxyphenol. Co(II) phthalocyanine displayed good catalytic performance in degradation of 2,3-dichlorophenol to 2,3-dichlorobenzaldehyde and 2,3-dichloro-1,4-benzoquinone with the highest TON and TOF values within 3?h at 50?°C. The fate of catalyst during the degradation process was followed by UV–Vis spectroscopy.     

番红花红聚合膜修饰电极及其应用

研究了番红花红(SFR)在玻碳电极表面聚合过程及聚合条件。SFR聚合膜对于肾上腺素(EP)的氧化能够起到明显的电催化作用。分别利用循环伏安法(CV)、差分脉冲法(DPV)、计时电流法研究了EP在pH7.4的磷酸缓冲溶液中的线性关系,发现其浓度分别在2.0×10-6～9.0×10-6mol/L、1.0×10-5～1.0×10-3mol/L(CV),2.0×10-5～4.0×10-4mol/L(DPV),2.0×10-6～5.0×10-6mol/L(计时电流法)范围内呈良好的线性关系,该电极已用于实际样品测定。     

QTAIM study of transition metal complexes with cyclophosphazene-based multisite ligands I: Zinc(II) and nickel(II) complexes

The metal–ligand bonds in [(ZnCl₂)₂L], [NiLCl]⁺ and two isomers of [NiLCl₂] complexes with multimodal ligand L = hexakis(2-pyridyloxy)cyclotriphosphazene, cyclo-[NP(NC₅H₄O)₂]₃, are investigated at DFT level of theory using hybrid B3LYP functional. Electron density is evaluated in terms of QTAIM (quantum theory of atoms-in-molecule) topological analysis of electron density. The bonds of central transition metal atoms with phosphazene nitrogens are shorter, stronger and more polar than with the aromatic pyridine nitrogens. The atomic charges of phosphazene nitrogens are ca twice more negative than at the pyridine ones. The higher mechanical strain in the five-coordinate metal complexes than in the six-coordinate ones may be concluded.     

Electrochemical study of glassy carbon electrodes modified with zirconium phosphate and some azine-type redox dyes

Glassy carbon (GC) electrodes were modified with a layer of zirconium phosphate (ZrP), using either direct chemical synthesis onto the surface or a ZrP gel droplet evaporation procedure. The azine-type dyes nile blue A (NB) and toluidine blue O (TB) were immobilized onto the ZrP-modified GC electrodes either by adsorption onto just the formed layer of ZrP or by inclusion into the ZrP matrix during its chemical synthesis. The electrochemical behavior of the GC·ZrP·dye composite electrodes was studied. For GC·ZrP-modified electrodes prepared by chemical synthesis on the surface, coverage by NB or TB of one or a few monolayers was found, with E _m values for these redox couples slightly shifting by ca. 0.05 V to the negative direction. For the GC·ZrP electrodes prepared by gel droplet evaporation, the E _m values for NB and TB appear initially shifted by ca. 0.2 V to the positive direction; however, both cathodic and anodic peaks return to their usual positions on the potential scale during soaking these electrodes in a buffer solution. Electronic Publication     

Electrocatalytic reduction of NAD+ at glassy carbon electrode modified with single-walled carbon nanotubes and Ru(III) complexes

A simple procedure was developed to prepare a glassy carbon electrode modified with carbon nanotubes and Ruthenium (III) complexes. First, 25 μl of dimethyl sulfoxide–carbon nanotubes solutions (0.4 mg/ml) was cast on the surface of the glassy carbon electrode and dried in air to form a carbon nanotube film at the electrode surface. Then, the glassy carbon/carbon nanotube-modified electrode was immersed into a Ruthenium (III) complex solution (direct deposition) for a short period of time (10–20 s for multiwalled carbon nanotubes and 20–40 s for single-walled carbon nanotubes). The cyclic voltammograms of the modified electrode in aqueous solution shows a pair of well-defined, stable, and nearly reversible redox couple, Ru(III)/Ru(II), with surface-confined characteristics. The attractive mechanical and electrical characteristics of carbon nanostructures and unique properties and reactivity of Ru complexes are combined. The transfer coefficient (α), heterogeneous electron transfer rate constants (k _s), and surface concentrations (Γ) for the glassy carbon/single-walled carbon nanotubes/Ru(III) complex-, glassy carbon/multiwalled carbon nanotubes/Ru(III) complex-, and glassy carbon/Ru(III) complex-modified electrodes were calculated using the cyclic voltammetry technique. The modified electrodes showed excellent catalytic activity, fast response time, and high sensitivity toward the reduction of nicotinamide adenine dinucleotide in phosphate buffer solutions at a pH range of 4–8. The catalytic cathodic current depends on the nicotinamide adenine dinucleotide concentration. In the presence of alcohol dehydrogenase, the modified electrode exhibited a response to addition of acetaldehyde. Therefore, the main product of nicotinamide adenine dinucleotide electroreduction at the Ru(III) complex/carbon nanotube-modified electrode was the enzymatically active NADH. The purposed sensor can be used for acetaldehyde determination.     

Poly(isonicotinic acid) modified glassy carbon electrode for electrochemical detection of norepinephrine

A glassy carbon electrode (GCE) was modified with electropolymerized films of isonicotinic acid in pH 5.6 phosphate buffer solution (PBS) by cyclic voltammetry (CV). The modified electrode showed an excellent electrocatalytical effect on the oxidation of norepinephrine (NE). In PBS of pH 7.4, the oxidation current increased linearly with two concentration intervals of NE, one is 4.0×10⁻⁷ to 1.0×10⁻⁵ M, the other is 1.0×10⁻⁵ to 2.0×10⁻⁴ M. The detection limit (S/N=3) obtained by DPV was 6.0×10⁻⁹ M. Then the modified electrode was used to determine NE in an excess of ascorbic acid (AA) by difference pulse voltammetry. The peak potentials recorded in a PBS of pH 7.4 were −68 and +111 mV versus SCE for AA and NE, respectively. The high selectivity and sensitivity for NE was found to be due to the very distinct attracting interaction between NE cations and the negtively charged poly(isonicotinic acid) film in pH 7.4 PBS. The proposed method exhibited good recovery and reproducibility.     

Voltammetric determination of mercury (II) in aqueous media using glassy carbon electrodes modified with novel calix[4]arene

A novel calix[4]arene derivative containing benzothiazole group was coated on glassy carbon electrode (GCE) and then applied to the recognition of mercury ion. Cyclic and square wave voltammetric results showed that the modified electrode selectively recognizes Hg²⁺ ion in aqueous media. A new anodic stripping peak at −0.3 V (vs. Ag/Ag⁺) can be obtained by scanning the potential from −0.6 to 0.6 V, and the peak currents are proportional to the Hg²⁺ concentration. The modified electrode in a 0.1 M H₂SO₄+0.01 M NaCl solution shows linear voltammetric response in the range of 25-300 μg l⁻¹ and detection limit of 5 μg l⁻¹ (ca. 2.5×10⁻⁸ M). This modified GCE does not present any significant interference from alkali, alkaline and transition metal ions except for Pb²⁺, Ag⁺ and Cu²⁺ ions. Only 500, 50 and 100-fold molar excess of Pb²⁺, Ag⁺ and Cu²⁺ ions, respectively, can lead to voltammetric response comparable with that of Hg²⁺. The proposed method was successfully applied to determine mercury in natural water.     

Styrene polymerization using nickel(II) complexes as catalysts

Styrene polymerization is investigated with neutral and cationic Ni(II) complexes, i.e. Ni(bipy)Me₂, 1, Ni(bipy)Br₂, 2, Ni(phen)Br₂, 3, or Ni(Me₂phen)Br₂, 4, Ni(acac)₂, 5, (bipy = 2,2′-bipyridine, phen = phenanthroline, Me₂phen = 2,9-dimethyl-1,10-phenanthroline, acac = acetylacetonate), activated by [NHMe₂Ph][B(C₆F₅)₄] or B(C₆F₅)₃ as cocatalysts, in the presence of AlMe₃. The influence on the polystyrene features and the reaction kinetics of the nickel complex and boron activator, the Al/Ni or B/Ni molar ratios as well as the monomer concentration are studied. Catalytic systems derived from 2, 3 or 5 and [NHMe₂Ph][B(C₆F₅)₄] at a Ni:B:Al ratio of 1:1:5 are the most efficient at room temperature.     

Electrocatalytic behaviour of carbon paste electrode modified with iron(II) phthalocyanine (FePc) nanoparticles towards the detection of amitrole

This paper describes the construction of a carbon paste electrode (CPE) impregnated with nanoparticles of iron(II) phthalocyanine (nanoFePc). The new electrode (nanoFePc-CPE) revealed interesting electrocatalytic behaviour towards amitrole; pure catalytic diffusion-controlled process, with high Tafel slope (235 mV/decade) suggesting strong binding of amitrole with nanoFePc catalyst. The effects of catalyst loading, varying pH and electrolytes were studied. The mechanism for the interaction of amitrole with the nanoFePc is proposed to involve the Fe^(III)Pc/Fe^(II)Pc redox process. Using chronoamperometry (E = +0.42 V versus Ag/AgCl) technique, the sensor was reliably employed for amitrole assay at pH 12.0 phosphate buffer (with sodium sulphate as the supporting electrolyte) for up to 12 nM amitrole with excellent sensitivity (ca. 3.44 μA/nM) and low detection limit (3.62 ± 0.11 nM, i.e. 0.305 μg L⁻¹ using the Y_B + 3_σB criterion and 0.85 ± 0.03 nM, i.e. 70 ng/L with the Y_B + 2_σB criterion) as well as satisfactory amperometric selectivity coefficient (K_amp ≈ 7.4 × 10⁻⁴ for ammonium thiocyanate, a component of many amitrole herbicides, and 3.2 × 10⁻³ for asulam pesticide). The surface of the electrode can easily be regenerated by simple polishing on an alumina paper, obtaining a fresh surface ready for use in a new assay. The proposed electrode was successfully applied in the quantification of amitrole in its commercial formulation as well as in tap water samples.     

Chronopotentiometric analysis of tocopherols using a glassy carbon vessel as the working electrode

Using a specific electrochemical cell with a glassy carbon vessel as the working electrode, a significant enhancement of the chronopotentiometric determination of tocopherols was achieved. Due to the large area of the working electrode, the method sensitivity was increased approximately 50-fold compared to the common electrochemical cell with a glassy-carbon disc electrode. Limits of quantitation of approximately 0.35 mg/dm³ for α-, γ- and δ-tocopherol were obtained. The influence of the most important experimental factors was investigated and the method defined was applied for tocopherol determination in crude vegetable oils. The tocopherol content was determined by standard solutions prepared in a matrix of animal fat. An absolute method for γ- and δ-tocopherol quantitation is also described.     

Synthesis and photoconductivity study of phthalocyanine polymers. II. PVK-co-CuPc (COOH)3

Cu-phthalocyanine diimide (Cu-diPc) was synthesized from a mixture of phthalic anhydride and pyromellitic dianhydride. By the hydrolysis of Cu-diPc, Cu-4,4′,5,5′-tetracarboxy-phthalocyanine (Cu-taPc) was obtained. A novel polymer of polyvinylcarbazole-bonded CuPc(COOH)₃ ( I ) was synthesized by the Friedel–Crafts reaction of polyvinylcarbazole (PVK) with Cu-phthalocyanine-4,4′,5,5′-tetraacid chloride. Polymer ( I ) contains ca. 5 mol % CuPc(COOH)₃ rings, which are covalently bonded to PVK. Polymer ( I ) shows good photoconductivity, which is much better than that of the corresponding phthalocyanine monomers. The factors that influence the photoconductivity, such as the thickness of IFL, and the types and proportion of CTM, were also studied. © 1993 John Wiley & Sons, Inc.     

Anodic stripping voltammetry of sulphide at a nickel film: towards the development of a reagentless sensor

The determination of sulphide at an electrochemically generated nickel oxide layer at glassy carbon and screen-printed electrodes in acidic media has been examined and appraised. The NiO layer was found to produce a stripping-like signal to sulphide and gave a linear peak current response from 20 to 90 μM. The response was further enhanced by repetitive cycling allowing accumulation of nickel sulphide at the electrode surface such that lower micromolar levels of sulphide (i.e. 5 μM) can be determined. The response at the NiO layer to sulphide is shown to be reproducible over a period of 24 h, thereby offering the development of a disposable amperometric sensor for sulphide.     

Stoichiometric reduction of primary alkyl monohalides with electrogenerated nickel(I) salen: Formation of aldehydes

Addition of a stoichiometric amount of a primary alkyl monohalide (1-bromoalkane or 1-iodoalkane) to a solution of nickel(I) salen electrogenerated at a reticulated vitreous carbon cathode in dimethylformamide (DMF) containing 0.10 M tetramethylammonium tetrafluoroborate (TMABF₄) in the presence of water, followed by irradiation with a xenon arc lamp and exposure to oxygen (O₂), results in the formation of an aldehyde in substantial yield. Using cyclic voltammetry (CV) and controlled-potential electrolysis (CPE), we have explored the effects of light, temperature, water, and a proton donor on the process. Reduction of an alkyl monohalide in the presence of isotopically labeled reagents, along with CV–CPE experiments (in combination with ultraviolet–visible spectroscopy) and high-performance liquid chromatography (HPLC), suggests the possibility that O₂ interacts with an alkylnickel(II) species (which could arise from a two-to-one nickel(I) salen-to-alkyl monohalide reaction in the presence of water) to produce an aldehyde, which has a tendency to undergo a base-catalyzed aldol condensation. In addition to the aldehyde, other products (dimers, alkanes, and alkenes) are formed via classic radical reactions.     

Oxygen reduction at the surface of glassy carbon electrodes modified with anthraquinone derivatives and dyes

The preparation, electrochemical and catalytic behaviour of glassy carbon electrodes modified by anthra-9,10-quinone, its amino derivatives and dyes were investigated. The stability of the modified electrodes was studied by cyclic voltammetry in acidic and neutral media. The electrocatalytic ability of the modified electrodes for the reduction of dioxygen to hydrogen peroxide was examined by cyclic voltammetry, chronoamperometry and chronocoulometry techniques. The influence of pH on the electrochemical and catalytic behaviour was studied and pH 5.0–8.0 was chosen as the optimum working pH by comparing the shift in oxygen reduction potential. The anthraquinone-adsorbed glassy carbon electrodes possess excellent electrocatalytic abilities for dioxygen reduction with overpotential ranging from 280 to 560 mV lower than that at a plain glassy carbon electrode. Hydrodynamic voltammetric studies were performed to determine the heterogeneous rate constants for the reduction of O₂ at the surface of the modified electrodes, mass specific activity of the anthraquinones used and the apparent diffusion coefficient of O₂ in buffered aqueous O₂-saturated solutions. Studies showed the involvement of two electrons in dioxygen reduction.     

四种药物中席夫碱基团在玻碳电极上的电化学行为

选择呋喃妥因、盐酸二甲双胍、西咪替丁和醋甲唑胺4种含有席夫碱基团的常见药物,运用电化学循环伏安法对其中的-C=N-基团在玻碳电极上的电化学氧化还原行为进行了研究。呋喃妥因、盐酸二甲双胍和西咪替丁中的席夫碱基团(-CH=N-)在玻碳电极上能够被还原,而且是一个电化学的不可逆过程,其还原电位分别为-0.864V,-1.36...     

Magnetostructural correlations in heteroleptic nickel(II) complexes

Heteroleptic nickel(II) complexes with the general formula Ni(L)_m(H₂O)_n(X)_k, have been synthesized and structurally characterized; L stands for neutral N-donor ligands: 4-benzofuropyridine (bzfupy), dimethylfuropyridine (Me₂fupy) and 1,2-dimethylimidazole (Me₂iz), X = acetate or Cl⁻. The structures of the complexes [Ni(bzfupy)₂(ac)₂(H₂O)₂], [Ni(Me₂fupy)₂(H₂O)₄](ac)₂ and [Ni(Me₂iz)₄(H₂O)₂]Cl₂ · 3H₂O are formed from {NiO₂O′₂N₂}, {NiO₄N₂} and {NiN₄O₂} chromophores, respectively. These complexes and two other previously characterized complexes, [Ni(pz)₄(ac)₂], pz – pyrazole, and [Ni(L^NN)₂(H₂O)₂], L^NN – bidentate chelating ligand, were subjected to magnetochemical investigation down to 2 K (susceptibility and magnetization measurements). They show magnetic behaviour typical for zero-field splitting systems. The axial parameter of the zero-field splitting, D, adopts either positive or negative values and correlates with the axial distortion of the coordination polyhedra.     

Structural studies of bis(histidinato)nickel(II): Combined experimental and computational studies

A distorted octahedral nickel(II) complex, [Ni(2-amino-3-(1H-imidazol-4-yl)propanoic acid)₂] (1), has been synthesized by a solvothermal method and characterized by single-crystal X-ray diffraction. Geometry optimization in the gas phase and pyridine together with Hirshfeld surface and reduced density gradient analyses reveal that this complex shows different distortions from octahedral in the gas, liquid, and solid phases. The reason seems to be because of the presence of two intramolecular NH⋯O weak interactions in the gas phase and two sets of rather strong intermolecular NH⋯O and CH⋯O interactions in the solid phase. Time-dependent density functional theory (TD-DFT) calculations suggest that these different distortions result in different electronic absorption spectra.     

Determination of nitrite with a nano-gold modified glassy carbon electrode by cyclic voltammetry

Abstract

Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) was employed to determine the concentration of rare earth elements (REEs) in plants and soils. Sample preparation and analytical conditions were investigated to set up a simple routine procedure for measuring rare earth elements. For prompt sample decomposition, a microwave digestion technique was successfully used with an acid mixture of HCl+HNO₃+HF. Detection limits, reproducibility, accuracy and possible interference were also studied. ICP-MS provided extremely low detection limits for REEs (0.6–6ng/l). Precision was typically better than 6% RSD (relative standard deviation) for soil and 10% for plant. The potential of the method was evaluated by analysis of standard reference materials of soils and plants. A good agreement between the experimental results and certified values was observed. The spectroscopic interference of Ba with Eu and light REEs(LREEs, La-Eu) with heavy REEs(HREEs, Gd-Lu) were eliminated by the algebra correction.

The results suggested that REEs in soil samples existed mainly as light REEs, and the same concentration distribution patterns of Oddo-Hakins law were observed, showing negative gradient from La to Lu concentrations. The REE contents in plants were very low, less than 20μg/g and varied with plant species. Apart from rape leaf(Brassica juncea), the REE distribution patterns in other plant leaves were consistent with soils, indicating that these plants generally absorbed REEs from soil without selectivity. Rape leaf showed selective absorption for LREEs, especially for La. The REE concentration distribution in parts of hot pepper(Capsicum annuum) was characteriaed by root>leaf>stem>fruit. The REEs absorbed by hot pepper concentrated mainly in roots and leaves, very little migrated into fruit. Transfer factors(TFs) of REEs in plants were very low. Although the contents of LREEs were relatively more than those of HREEs, no distinct difference of TFs between LREEs and HREEs was observed, meaning that LREEs and HREEs have the same abilities of transportation. However, for rape leaf, the TFs of LREEs were one or two orders of magnitude higher than those of HREEs.