Development and validation method for determination of fluoxetine and its main metabolite norfluoxetine by nonaqueous capillary electrophoresis in human urine

A simple, rapid and sensitive procedure using nonaqueous capillary electrophoresis (NACE) to measure fluoxetine and its main metabolite norfluoxetine has been developed and validated. Optimum separation of fluoxetine and norfluoxetine, by measuring at 230 nm, was obtained on a 60 cm × 75 μm capillary using a nonaqueous solution system of 7:3 methanol-acetonitrile containing 15 mM ammonium acetate, capillary temperature and voltage 25 °C and 25 kV, respectively and hydrodynamic injection. Paroxetine was used as internal standard. Good results were obtained for different aspects including stability of the solutions, linearity, and precision. Detection limits of 10 μg L⁻¹ were obtained for fluoxetine and its metabolite. This method has been used to determine fluoxetine and it main metabolite at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of extraction-preconcentration step with a preconditioned C₁₈ cartridge and eluting the compounds with methanol.     

Development and validation method for determination of Paroxetine and its metabolites by nonaqueous capillary electrophoresis in human urine. Experimental design for evaluating the ruggedness of the method

A simple, rapid, and sensitive procedure using nonaqueous capillary electrophoresis (NACE) to measure Paroxetine (one of the mostly used antidepressants for mental diseases treatment) and three metabolites has been developed and validated. Optimum separation of paroxetine and metabolites was obtained on a 57 cm x 75 microm capillary using a nonaqueous buffer system of 9:1 methanol-acetonitrile containing 25 mM ammonium acetate and 1% acetic acid, with temperature and voltage of 25 degrees C and 15 kV, respectively, and hydrodynamic injection. Fluoxetine was used as an internal standard. Good results were obtained for different aspects including stability of the solutions, linearity, accuracy, and precision. Detection limits between 9.3 and 23.1 microg.L(-1) were obtained for paroxetine and its metabolites. A ruggedness test of the method was carried out using the Plackett-Burman fractional factorial model with a matrix of 15 experiments. This method has been used to determine paroxetine and its main metabolite B at clinically relevant levels in human urine. Prior to NACE determination, the samples were purified and enriched by means of an extraction-preconcentration step with a preconditioned C18 cartridge and eluting the compounds with methanol.     

Nonaqueous capillary electrophoresis method for the analysis of tamoxifen, imipramine and their main metabolites in urine

The viability of nonaqueous capillary electrophoresis (NACE) was investigated for the simultaneous determination of tamoxifen, imipramine and their main metabolites (4-hydroxytamoxifen and desipramine, respectively). Baseline separation of the studied solutes was obtained on a 57 cm × 75 μm capillary using a nonaqueous solution composed of 17 mM ammonium acetate and 1.25% acetic acid in 80:20 (v:v) methanol-acetonitrile, temperature and voltage 22 °C and 15 kV, respectively, and hydrodynamic injection. Paroxetine was used as internal standard. Different aspects including linearity, accuracy, ruggedness and precision was studied. Detection limits between 9.0 and 15.0 μg L⁻¹ were obtained for all the studied compounds. The developed method is simple, rapid and sensitive and has been used to determine tamoxifen, imipramine and their metabolites at clinically relevant levels in human urine. Before NACE determination, a solid phase extraction (SPE) procedure with a C₁₈ cartridge was necessary. Real determination of these analytes in three females urines were done.     

Micelle to solvent stacking of two alkaloids in nonaqueous capillary electrophoresis

This paper for the first time describes the development of micelle to solvent stacking (MSS) to nonaqueous capillary electrophoresis (NACE). In this proposed MSS-NACE, sodium dodecyl sulfate (SDS) micelles transport, release, and focus analytes from the sample solution to the running buffer using methanol as their solvent. After the focusing step, the focused analytes were separated via NACE. The focusing mechanism and influencing factors were discussed using berberine (BBR) and jatrorrhizine (JTZ) as model compounds. And the optimum condition was obtained as following: 50 mM ammonium acetate, 6% (v/v) acetic acid and 10 mM SDS in redistilled water as sample matrix, 50 mM ammonium acetate and 6% (v/v) acetic acid in pure methanol as the running buffer, -20 kV focusing voltage with 30 min focusing time. Under these conditions, this method afforded limits of detection (S/N=3) of 0.002 μg/mL and 0.003 μg/mL for BBR and JTZ, respectively. In contrast to conventional NACE, the concentration sensitivity was improved 128-153-fold.     

Determination of flurbiprofen enantiomers in plasma using a single-isomer amino cyclodextrin derivative in nonaqueous capillary electrophoresis

A nonaqueous capillary electrophoresis (NACE) assay was developed for the separation and determination of flurbiprofen enantiomers in plasma samples using 6-monodeoxy-6-mono(3-hydroxy)propylamino-beta-cyclodextrin as chiral selector. The nonaqueous background electrolyte was made up of 40 mM ammonium acetate in methanol (MeOH), and flufenamic acid was employed as internal standard. Solid-phase extraction was used for sample cleanup prior to the NACE separation. The NACE method reproducibility was optimized by evaluating different capillary washing sequences between runs. After having tested various conditions, trifluoroacetic acid (1 M) in MeOH was finally selected. Concerning the solid-phase extraction procedure, good and reproducible analyte recoveries were obtained using MeOH for protein denaturation and a polymeric phase combining hydrophobic interactions with anion exchange properties (Oasis) MAX) was selected as extraction sorbent. The method selectivity was not only demonstrated toward a blank plasma sample but also toward other non-steroidal anti-inflammatory drugs. The method was then successfully validated with respect to response function, trueness, precision, accuracy, linearity and limit of quantification.     

Nonaqueous capillary electrophoresis-mass spectrometry for separation of venlafaxine and its phase I metabolites

Aqueous and nonaqueous capillary electrophoresis (NACE) were investigated for separation of venlafaxine, a new second-generation antidepressant, and its three phase I metabolites. Working at basic pH, around the venlafaxine pKa value, was effective in resolving the investigated drugs, but created considerable peak tailing. To overcome electrostatic interactions between analytes and silanol groups, investigations were also carried out at acidic pH. However, despite the addition of up to 50% v/v of organic solvents (e.g., methanol or acetonitrile), complete separation of the studied compounds was not possible. NACE was found to be an appropriate alternative to resolve venlafaxine and its metabolites simultaneously. Using a conventional capillary (fused-silica, 64.5 cm length, 50 microm inner diameter), and a methanol-acetonitrile mixture (20/80 v/v) containing 25 mM ammonium formate and 1 M formic acid, complete resolution of these closely related compounds was performed in less than 3.5 min. Selectivity, efficiency and separation time were greatly affected by the organic solvent composition. As the electric current generated in nonaqueous medium was very low, the electric field was further increased by reducing the capillary length. This allowed a baseline resolution of venlafaxine and its three metabolities in 0.7 min. Selectivity was compared in aqueous and nonaqueous media in relation to the acid-base properties of the analytes as well as to the solvation degree. Finally, the method successfully coupled on-line to mass spectrometry with electrospray ionization interface allowed significant sensitivity enhancement.     

Nonaqueous capillary electrophoresis with laser-induced fluorescence detection: a case study of comparison with aqueous media

A novel method based on separation by nonaqueous capillary electrophoresis (NACE) combined with laser-induced fluorescence (LIF) detection was developed and compared with classic aqueous modes of electrophoresis in terms of resolution of solutes of interest and sensitivity of the fluorescence detection. Catecholamines derivatized with 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) were chosen as test analytes for their subtle fluorescence properties. In aqueous systems, capillary zone electrophoresis (CZE) was not suitable for the analysis of test analytes due to complete fluorescence quenching of NBD-labeled catecholamines in neat aqueous buffer. The addition of micelles or microemulsion droplets into aqueous running buffer can dramatically improve the fluorescence response, and the enhancement seems to be comparable for micellar electrokinetic chromatography (MEKC) and microemulsion electrokinetic chromatography (MEEKC). As another alternative, NACE separation was advantageous when performing the analysis under the optimum separation condition of 20 mM sodium tetraborate, 20 mM sodium dodecyl sulfate (SDS), 0.1% (v/v) glacial acetic acid, 20% (v/v) acetonitrile (ACN) in methanol medium after derivatization in ACN/dimethyl sulfoxide (DMSO) (3:2, v/v) mixed aprotic solvents containing 20 mM ammonium acetate. Compared with derivatization and separation in aqueous media, NACE-LIF procedure was proved to be superior, providing high sensitivity and short migration time. Under respective optimum conditions, the NACE procedure offered the best fluorescence response with 5-24 folds enhancement for catecholamines compared to aqueous procedures. In addition, the mechanisms of derivatization and separation in nonaqueous media were elucidated in detail.     

Separation of open-cage fullerenes using nonaqueous capillary electrophoresis

In this study, nonaqueous capillary electrophoresis (NACE) was used to separate three open-cage fullerenes. Trifluoroacetic acid (TFA) was used as the nonaqueous background electrolyte to change the analytes’ mobilities. The selectivity and separation efficiency were critically affected by the nature of the buffer system, the choice of organic solvent, and the concentrations of TFA and sodium acetate (NaOAc) in the background electrolyte. The optimized separation occurred using 200 mM TFA/20 mM NaOAc in MeOH/acetonitrile (10:90, v/v), providing highly efficient baseline separation of the open-cage fullerenes within 5 min. The migration time repeatability for the three analytes was less than 1% (relative standard deviation). Thus, NACE is a rapid, useful alternative to high-performance liquid chromatography for the separation of open-cage fullerenes.     

Non-aqueous capillary zone electrophoresis method for the analysis of paroxetine, tamoxifen, and their main metabolites in urine

The potential of non-aqueous capillary electrophoresis (NACE) was investigated for the simultaneous separation of paroxetine, tamoxifen, and their main metabolites. Baseline separation of the studied solutes was obtained on a  μm capillary using a non-aqueous buffer composed of 18 mM ammonium acetate and 1.1% acetic acid in 80:20 (v/v) methanol-acetonitrile, with a temperature and voltage of 22 °C and 15 kV, respectively. Clomipramine was used as internal standard. Aspects such as stability of the solutions, linearity, accuracy, precision and ruggedness were examined in order to validate the proposed method. Detection limits obtained for all the studied compounds ranged between 3.0 and 7.1 μg l⁻¹. The developed method is sensitive and robust and was used to determine paroxetine, tamoxifen, and their metabolites at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of an extraction-pre-concentration step with a pre-conditioned C₁₈ cartridge. Determination of these analytes in the urine of four females urines was demonstrated.     

Characterization of pharmaceutical drugs by a modified nonaqueous capillary electrophoresis--mass spectrometry method

A simple method for the separation and characterization of a group of nine basic compounds, comprising seven tricyclic antidepressant and two bronchodilator drugs, by nonaqueous capillary electrophoresis (NACE) employing ultraviolet and mass spectrometry detection is described. After optimization of the electrophoresis separation conditions, including the compositions of the electrolyte and the organic solvent, a reliable separation of all nine basic analytes was achieved in 80 mM ammonium formate dissolved in a methanol-acetonitrite (80:20 v/v) mixture, having an apparent pH of 8.7. The volatile nonaqueous electrolyte system used with a normal electroosmotic flow polarity also provided an optimal separation condition for the characterization of the analytes by mass spectrometry. When results were compared with reversed-phase gradient and isocratic high-performance liquid chromatography (HPLC) methods, the NACE method provided greater efficiency, achieving baseline resolution for all nine basic compounds in less than 30 min. The NACE method is suitable for use as a routine procedure for the rapid separation and characterization of basic compounds and is a viable alternative to HPLC for the separation of a wide range of pharmaceutical drugs.     

Analysis of Calix[4]arenes Using Nonaqueous Capillary Electrophoresis

In nonaqueous capillary electrophoresis (NACE), an organic solvent is used in place of an aqueous medium as the background solution to improve the solubility and selectivity for hydrophobic analytes. In this study, we employed NACE with UV detection for the analysis of eight calix[4]arenes. We examined the influence of several parameters—the buffer composition, the nonaqueous solvent‘s composition and proportion, and the concentration of the electrolyte of the nonaqueous buffer—on the efficiency of the electrophoretic separation. The separation was achieved through the analyte's different effective mobility via different degrees of deprotonation on the phenolic OH groups of the calix[4]arene. This deprotonation can further affect the analyte's ability to form a complex with the metal ion. The optimized background electrolyte (BGE), comprising a mixture of N‐methylformamide/acetonitrile (30:70, v/v) and 100 mM AcOH/20 mM NH₄OAc, provided rapid (<11 min) separation of the calix[4]arenes with good resolution. The relative standard deviations of the migration times for the eight analytes were all less than 1%. Within the calibration concentration range, the coefficients of determination (R²) were all greater than 0.9914. Thus, the present study demonstrated NACE can provide adequate separation for the analysis of calix[4]arenes.     

Capillary zone electrophoresis applied to the determination of the angiotensin-converting enzyme inhibitor cilazapril and its active metabolite in pharmaceuticals and urine

A capillary zone electrophoresis method has been developed for the quantitation of antihypertensive drug cilazapril and its active metabolite cilazaprilat in pharmaceuticals and urine. The separation of the compounds was performed in a fused-silica capillary filled with the running electrolyte, which consisted of a 60 mM borate buffer solution at pH 9.5. Under the optimized experimental conditions, the separation took less than 5 min. The analysis of urine samples required a previous solid-phase extraction step using C8 cartridges. The method was successfully applied to the determination of the drug and its metabolite in urine samples obtained from three hypertensive patients (detection limits of 115 ng ml(-1) for cilazaprilat and 125 ng ml(-1) for cilazapril) and to pharmaceutical dosage forms. The method was validated in terms of reproducibility, linearity and accuracy.     

Determination of the angiotensin-converting enzyme inhibitor quinapril and its metabolite quinaprilat in pharmaceuticals and urine by capillary zone electrophoresis and solid-phase extraction

Quinapril is an antihypertensive drug commonly used in the treatment of hypertension and congestive heart failure. In this work, a capillary zone electrophoresis system is optimized for the analysis of quinapril and its active metabolite quinaprilat in urine, as well as for the determination of the drug and its combination with hydrochlorothiazide in pharmaceuticals. The separation takes place in a fused-silica capillary. The running electrolyte consists of a 60 mM borate buffer solution, pH 9.5. The analysis of urine samples requires a previous extraction step using C8 solid-phase cartridges. Under the optimum experimental conditions, the separation of the two analytes and the internal standard takes less than 5 min. The detection limits obtained (75 and 95 ng/mL for quinapril and quinaprilat, respectively) allow the application of the electrophoretic method to the determination of the drug and its metabolite in urine samples obtained from four patients treated with quinapril.     

Optimisation of a Headspace Solid-Phase Micro- Extraction Procedure for the Determination of 2,4,6-Trichloroanisole and Various Related Compounds in Cork Washing Waste Water by Use of Gas Chromatography-Mass Spectrometry

This paper reports the use of an anionic cyclodextrin, heptakis(2,3-di-O-methyl-6-O-sulfato)-β-cyclodextrin (HDMS-β-CD), for chiral separations of pharmaceutical enantiomers by nonaqueous capillary electrophoresis (NACE). Enantiomer resolution was affected mainly by HDMS-β-CD concentration and the acidity of the background electrolyte (BGE). The effects of capillary length and applied voltage on enantiomer resolution were also investigated. Results showed that in a methanol solution of 20 mM phosphoric acid, 10 mM sodium hydroxide, and 10 mM HDMS-β-CD, seven anticholinergic drugs were separated to baseline but no chiral separation was obtained for three other similar drugs. NACE is suitable for routine, rapid separation of the enantiomers of pharmaceutical compounds.     

Determination of Matrine and Oxymatrine in Sophora Flavescens by Nonaqueous Capillary Electrophoresis-Electrospray Ionization-Ion Trap-Mass Spectrometry

A simple, rapid, and sensitive nonaqueous capillary electrophoresis-electrospray ionization-ion trap-mass spectrometry (NACE-ESI-IT-MS) method was developed for determination of matrine and oxymatrine in Sophora Flavescens and medicinal preparations. The conditions for NACE separation and MS detection were systematically optimized. The optimum NACE buffer contained 30 mM ammonium acetate, 1% acetic acid, and 15% acetonitrile in methanol and the applied voltage on separation capillary was set at 25 kV. Berberine was selected as internal standard. In order to generate a stable electrospray, a sheath liquid (isopropanol/H₂O, 2/1, v/v) was used, which could also boost the flow through the ESI needle. The matrine and oxymatrine solutions were introduced into MS detection by a syringe pump for collecting the MSⁿ spectra to investigate the main fragment ions and its possible cleavage pathways. Both matrine and oxymatrine showed good linearity in the concentration ranges from 0.5 to 400 µg/mL, with linear correlation coefficient R > 0.99 and the limit of detections were 37.5 ng/mL for matrine and 50.0 ng/mL for oxymatrine, respectively. The recoveries at different content of Sophora Flavescens were 98.3%–102.9% for MT and 95.3%–100.6% for OMT, which indicates the reliability of this method.     

Orthogonal separations of nicotine and nicotine-related alkaloids by various capillary electrophoretic modes

The migration behaviour of nicotine and related tobacco alkaloids was investigated using three different capillary electrophoretic (CE) modes. Novel separations were achieved both using microemulsion electrokinetic chromatography (MEEKC) and nonaqueous CE (NACE). Improved resolution compared to previous studies was obtained using free-solution CE (FSCE). Each technique resulted in different, orthogonal separation selectivity. The suitability of each method for application to the analysis of nicotine lozenges is discussed. The FSCE method was applied to the analysis of nicotine lozenges due to its compatibility with an established lozenge extraction solvent. The method used gave good injection precision and linearity. Good agreement of CE and high-performance liquid chromatography (HPLC) results was obtained. The CE method is therefore considered suitable for the quantitative determination of nicotine in nicotine lozenges.     

Separation and determination of phospholipids in plant seeds by nonaqueous capillary electrophoresis

A method has been developed for the separation and determination of phospholipids by nonaqueous capillary electrophoresis in a separation medium of acetonitrile-2-proponol (3:2, v/v), 0.3% acetic acid and 60 mM ammonium acetate. To optimize the separation conditions, the composition of separation medium including alcohols, acetic acid, n-hexane and ammonium acetate was studied. The solvation interaction and ion-dipole interaction were also investigated. The contents of phospholipids in soybean, sunflower, peanut, apricot kernel, filbert and walnut were determined by the recommended method. The results obtained by the nonaqueous capillary electrophoreses were in good agreement with those determined by micellar electrokinetic chromatography.     

Separation of chlorins and carotenoids in capillary electrophoresis

The present study reports the investigation of capillary electrophoresis (CE) for the separation of the photosynthetic pigments (chlorophyll derivatives as well as carotenoids) together. Various CE methods, such as micellar electrokinetic chromatography, capillary electrokinetic chromatography, and nonaqueous capillary electrophoresis (NACE) are tested, with coated and uncoated capillary columns to evaluate optimal separation conditions using diode array detection. The effect of different type and composition of organic solvents and surfactants on the separation is discussed. Detection limits are found in the range of 1.14-2.45 ppm. According to the system suitability results, the most effective separation is observed using NACE with Aliquat 336 as cationic surfactant in coated capillary and mixture of MeOH-ACN-THF (5:4:1, v/v/v) as solvent. Quantitative evolution is investigated, and recovery percentage values are found to be 96.7-102%.     

Development of HPLC and NACE methods for the simultaneous determination of benzoic and sorbic acids in sour snap beans containing oil

The practical methods were developed for the simultaneous determination of benzoic acid (BA) and sorbic acid (SA) in sour snap bean samples containing oil. BA and SA in the samples were extracted by ultrasonication with water, followed by cleanup procedures with precipitation for removing the potential proteins and with petroleum ether liquid-liquid extraction for removing the edible oil contained in the samples. The HPLC method was developed using Supelco C18 (250 mm x 4.6 mm id, 5 microm) as column, MeOH-20 mM NH(4)Ac (25:75 v/v) at 1.0 mL/min as the mobile phase and 230 nm as the detection wavelength. The optimal NACE method was established with a running buffer of 20.0 mM NH(4)Ac in 95% MeOH (pH* 10.6), and an applied voltage of -30 kV over a capillary of 50 microm id x 48.5 cm (40 cm to the detector window), which gave a baseline separation of BA and SA, and as well as of the blank matrix within ca. 10 min. Both HPLC and NACE methods gave the relatively lower limits of quantification at about 0.01-0.02 and 0.04-0.05 mg/kg, respectively, whereas the overall recoveries were larger than 85.0%. The proposed methods have been successfully applied to measure 15 real sour bean samples and the content profile of BA and SA in sour bean samples was obtained and evaluated.     

Di-n-amyl L-tartrate-boric acid complex chiral selector in situ synthesis and its application in chiral nonaqueous capillary electrophoresis

A chiral selector, di-n-amyl L-tartrate-boric acid complex, was in situ synthesized by the reaction of di-n-amyl L-tartrate with boric acid in a nonaqueous background electrolyte (BGE) using methanol as the medium. And a new method of chiral nonaqueous capillary electrophoresis (NACE) was developed with the complex as the chiral selector. It has been demonstrated that the chiral selector is suitable for the enantioseparation of some β-blockers and β-agonists in NACE. Some chiral analytes that could not be resolved in aqueous microemulsion electrokinetic chromatography (MEEKC) with the same chiral selector obtained baseline resolutions in the NACE system. The enantioseparation mechanism was considered to be ion-pair principle and the nonaqueous system was more favorable for the ion-pair formation which is quite useful for the chiral recognition. The addition of a proper concentration of triethylamine into the BGE to control the apparent pH (pH*) enhanced the enantiomeric discrimination. In order to achieve a good enantioseparation, the effects of di-n-amyl L-tartrate and boric acid concentration, triethylamine concentration, applied voltage, as well as capillary length were investigated. Under the optimum conditions, all of the tested chiral analytes including six β-blockers and five β-agonists were baseline resolved.