Investigation on the aggregation behaviors of DDAB/NaDEHP catanionic vesicles in the absence and presence of a negatively charged polyelectrolyte

The aggregation behaviors of the cationic and anionic (catanionic) surfactant vesicles formed by didodecyldimethylammonium bromide (DDAB)/sodium bis(2-ethylhexyl) phosphate (NaDEHP) in the absence and presence of a negatively charged polyelectrolyte are investigated. The amount of the charge on the vesicle can be tuned by controlling the DDAB/NaDEHP surfactant molar ratio. The charged vesicular dispersions made of DDAB/NaDEHP are mixed with a negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on the polyelectrolyte/vesicle charge ratio, complex flocculation or precipitation occurs. Characterization of the catanionic vesicles and the complexes are performed by transmission electron microscope (TEM), Cryo-TEM, dynamic light scattering (DLS), conductivity, turbidity, zeta potential, isothermal titration calorimetry (ITC) and small-angle X-ray scattering (SAXS) measurements.     

Reversible Switching of a Micelle‐to‐Vesicle Transition by Compressed CO2

The study of the micelle‐to‐vesicle transition (MVT) is of great importance from both theoretical and practical points of view. Herein, we studied the effect of compressed CO₂ on the aggregation behavior of dodecyltrimethylammonium bromide (DTAB)/sodium dodecyl sulfate (SDS) mixed surfactants in aqueous solution by means of direct observation, turbidity and conductivity measurements, steady‐state fluorescence, time‐resolved fluorescence quenching (TRFQ), fluorescence quantum yield, and template methods. Interestingly, all these approaches showed that compressed CO₂ could induce the MVT in the surfactant system, and the vesicles returned to the micelles simply by depressurization; that is, CO₂ can be used to switch the MVT reversibly by controlling pressure. Some other gases, such as methane, ethylene, and ethane, could also induce the MVT of the surfactant solution. A possible mechanism is proposed on the basis of the packing‐parameter theory and thermodynamic principles. It is shown that the mechanism of the MVT induced by a nonpolar gas is different from the MVT induced by polar and electrolyte additives.     

Characterization and Aggregation Behaviors of Mixed DDAB/SDS Solution With and Without Poly(4-styrenesulfonic Acid-Co-Maleic Acid) Sodium

Synthetic vesicles are formed by cationic and anionic surfactants, didodecyldimethylammonium bromide (DDAB), and sodium dodecylsulfate (SDS). The morphology, size, and aqueous properties of cationic/anionic mixtures are investigated at various molar ratios between cationic and anionic surfactants. The charged vesicular dispersions made of DDAB/SDS are contacted or mixed with negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on DDAB/SDS molar ratio or PSSAMA/vesicle charge ratio, complexes flocculation or precipitation occur. Characterization of the cationic/anionic vesicles or complexes formed by the catanionic vesicles and polyelectrolytes is performed by transmission electron microscope (TEM), dynamic light scattering (DLS), conductivity, turbidity, and zeta potential measurements. The size, stability, and the surface charge on the mixed cationic/anionic vesicles or complexes are determined.     

Phase behavior and thermodynamics of a mixture of cationic gemini and anionic surfactant

We present the phase behavior and thermodynamics of the catanionic mixture of the gemini surfactant hexanediyl-alpha,omega-bis(dodecyldimethylammonium bromide), designated here as 12-6-12Br(2), and sodium dodecyl sulfate (SDS) over the full range of composition, at the water-rich corner. Visual and turbidity measurements of the mixtures provide some basic macroscopic information on phase behavior. The structure of the aggregates formed spontaneously in the mixtures has been observed with TEM. As the molar fraction of SDS, X(SDS), is increased, at constant total surfactant concentration, the aggregation morphologies change gradually from gemini-rich micelles, through multiphase regions containing a precipitate (catanionic surfactant) and a vesicle region, to SDS-rich micelles. From isothermal titration calorimetry measurements, the phase boundaries and corresponding enthalpy changes for phase transitions have been obtained. The formation of the different microstructures, in particular, the spontaneously formed vesicles in the SDS-rich side, is discussed on the basis of geometric and electrostatic effects occurring in the SDS-gemini mixture.     

Effect of alkyl chain asymmetry on catanionic mixtures of hydrogenated and fluorinated surfactants

In this work we studied and compared the physicochemical properties of the catanionic mixtures cetyltrimethyl-ammonium bromide–sodium dodecanoate, cetyltrimethyl-ammonium bromide–sodium perfluorodacanoate, octyltrimethylammonium bromide–sodium perfluorodacanoate and cetyltrimethyl-ammonium bromide–sodium octanoate by a combination of rheological, transmission electron microscopy (TEM) and polarized optical microscopy measurements. The binary mixtures of the surfactants have been analyzed at different mixed ratios and total concentration of the mixture. Mixtures containing a perfluorinated surfactant are able to form lamellar liquid crystals and stable spontaneous vesicles. Meanwhile, system containing just hydrogenated surfactants form hexagonal phases or they are arranged in elongated aggregates.     

Blastulae aggregates: new intermediate structures in the micelle-to-vesicle transition of catanionic systems

A new type of intermediate structure was found in the salt-induced micelle-to-vesicle transition in a catanionic system composed of sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB) in aqueous solution with an excess of anionic surfactant. The appearance of symmetrically shaped hollow structures, which we named blastulae vesicles, is presented.     

Horseradish peroxidase activity in a reverse catanionic microemulsion

In this paper we present the first results of enzymatic activities in a reverse microemulsion medium based on a mixture of an anionic and a cationic surfactant, called catanionic microemulsion. The studied system is composed of sodium dodecyl sulfate (SDS)/dodecyltrimethylammonium bromide (DTAB)/n-hexanol/citrate buffer/n-dodecane, with high SDS/(SDS + DTAB) weight fractions. It turns out that the results are similar to those obtained in classical reverse microemulsions, except that the presence of DTAB exerts an inhibiting effect on the enzyme. Nevertheless, enzymatic superactivities are found even at a DTAB to total surfactant ratio of 15%, corresponding to 3% weight fraction of cationic surfactant in the microemulsion. The influence of pH and hexanol content on the enzymatic activities is also studied.     

可聚合囊泡体系(烯丙基-二甲基-十二烷基溴化胺和十二烷基硫酸钠)在溶液中的盐效应

高稳定的囊泡广泛用于制作生物模型、药物输送以及合成纳米材料的模板。获得高稳定囊泡结构的重要方法之一是用聚合反应固定囊泡结构。作为可聚合囊泡制备的前期基础工作,研究了一种可聚合的囊泡体系：1-丙烯基－2,2,二甲基－十二烷基溴化胺（ADDB）和ADDB与十二烷基磺酸钠（SDS）的等摩尔比混合体系。该囊泡体系即使在高浓度盐水中也能够自发地形成均相的囊泡溶液。在聚合之前,采用动态激光光散射（DLS）、冷冻蚀刻透射电镜（FF-TEM）技术研究了可聚合囊泡的盐效应。DLS测试发现没有盐存在时,囊泡大小为83 nm,盐的浓度增加到250 mmol/L时,囊泡尺寸增大到250 nm。然而继续增大盐浓度到1000 mmol/L, 囊泡尺寸减小到180nm. FF-TEM结果发现盐浓度小于150 mM时, 单个囊泡为70 nm左右,然而明显存在囊泡的絮凝与融合;当盐浓度增加到400 mM时,单个囊泡尺寸减小到20 nm. 因此DLS 观测到囊泡尺寸增大的原因是由于囊泡的絮凝与融合;而尺寸减小的原因是由于在高盐浓度下,盐屏蔽了带电颗粒之间的静电相互作用,在熵增的驱使下,大囊泡变成小囊泡。     

Comparative studies on the crystalline to fluid phase transitions of two equimolar cationic/anionic surfactant mixtures containing dodecylsulfonate and dodecylsulfate

In this work, a cationic surfactant, dodecyltrimethylammonium bromide (DTAB), and an anionic surfactant, sodium dodecylsulfonate (SDSO(3)) or sodium dodecylsulfate (SDSO(4)), were mixed in an equimolar ratio to prepare SDSO(3)-DTAB and SDSO(4)-DTAB binary mixtures. The phase behavior, structure, and morphology of these two surfactant mixtures were investigated by differential scanning calorimetry, synchrotron X-ray scattering, freeze-fracture electron microscopy, and Fourier transform infrared spectroscopy. It was found that upon heating, both of the two systems transform from multilamellar crystalline phase to liquid crystalline (or fluid) phase. It is interesting to find that, although SDSO(3) has a lower molecular weight, the crystalline phase of SDSO(3)-DTAB shows much higher thermostability as compared with that of SDSO(4)-DTAB. Other than this, we observed a large difference in the repeat distances of the two crystalline phases. More interestingly, at 60 °C in the fluid phases, cylindrical micelles formed in the SDSO(3)-DTAB system, while spherical micelles were observed in the SDSO(4)-DTAB system. Our present work demonstrates that a subtle difference in the headgroup structure of the anionic component markedly affects the thermostability, packing structure, and morphology of the surfactant mixtures, which suggests the importance of the match of the head-head and tail-tail interactions between the cationic and anionic surfactants.     

A Femtosecond Study of Solvation Dynamics and Anisotropy Decay in a Catanionic Vesicle: Excitation‐Wavelength Dependence

The structure and dynamics of a catanionic vesicle are studied by means of femtosecond up‐conversion and dynamic light scattering (DLS). The catanionic vesicle is composed of dodecyl‐trimethyl‐ammonium bromide (DTAB) and sodium dodecyl sulphate (SDS). The DLS data suggest that 90 % of the vesicles have a diameter of about 400 nm, whereas the diameter of the other 10 % is about 50 nm. The dynamics in the catanionic vesicle are compared with those in pure SDS and DTAB micelles. We also study the dynamics in different regions of the micelle/vesicle by varying the excitation wavelength (λ_ex) from 375 to 435 nm. The catanionic vesicle is found to be more heterogeneous than the SDS or DTAB micelles, and hence, the λ_ex‐dependent variation of the solvation dynamics is more prominent in the first case. The solvation dynamics in the vesicle and the micelles display an ultraslow component (2 and 300 ps, respectively), which arises from the quasibound, confined water inside the micelle, and an ultrafast component (<0.3 ps), which is due to quasifree water at the surface/exposed region. With an increase in λ_ex, the solvation dynamics become faster. This is manifested in a decrease in the total dynamic solvent shift and an increase in the contribution of the ultrafast component (<0.3 ps). At a long λ_ex (435 nm), the surface (exposed region) of a micelle/vesicle is probed, where the solvation dynamics of the water molecules are faster than those in a buried location of the vesicle and the micelles. The time constant of anisotropy decay becomes longer with increasing λ_ex, in both the catanionic vesicle and the ordinary micelles (SDS and DTAB). The slow rotational dynamics (anisotropy decay) in the polar region (at long λ_ex) may be due to the presence of ionic head groups and counter ions.     

Effect of sodium dodecyl sulfate and cetyltrimethylammonium bromide catanionic surfactant on the enzymatic hydrolysis of Avicel and corn stover

Nonionic surfactants could effectively improve the enzymatic hydrolysis efficiency of lignocellulose, while small molecule anionic and cationic surfactants usually inhibited the enzymatic hydrolysis. The results showed that the anionic surfactant sodium dodecyl sulfate (SDS) could improve the enzymatic hydrolysis efficiency of Avicel at the concentration range of 0.1–1 mM, but it did inhibit enzymatic hydrolysis at higher concentration. Cationic surfactant cetyltrimethylammonium bromide (CTAB) was used to regulate the surface charge of SDS; thereby catanionic surfactant SDS-CTAB was formed. The effect of SDS-CTAB catanionic surfactant with varied molar ratios on the enzymatic hydrolysis of pure cellulose and corn stover at various enzymatic hydrolysis environments was investigated. SDS-CTAB could increase the enzymatic hydrolysis of corn stover at high solid loading from 33.3 to 42.4%. Using SDS-CTAB could reduce about 58% of the cellulase dosage to achieve 80% of the enzymatic hydrolysis of corn stover. SDS-CTAB catanionic surfactant could regulate the surface charge of cellulase in the hydrolyzate and reduce the non-productive adsorption of cellulase on the lignin, thereby improving the enzymatic hydrolysis efficiency of lignocellulose.     

SDS及其与十二烷基三乙基溴化铵混合体系在矿化水中的表面活性

测定了十二烷基硫酸钠(SDS)、十二烷基三乙基溴化铵(DTEAB)单一体系及不同摩尔比的混合体系在矿化水溶液中的表面活性,并与在纯水和NaCl水溶液中的表面活性作了比较．所得结果表明：(1)阴离子表面活性剂SDS在含Ca^2 ,Mg^2 等的矿化水中有比在纯水和NaCl水溶液中更好的表面活性．这一方面是由于矿化水中的Ca^2 ,Mg^2 对负电胶团和表面吸附层的强烈电性作用,另一方面在大量Na^ 存在时,钠钙盐混合表面活性剂Krafft点提高不多;(2)SDS和DTEAB混合物在矿化水中具有很强的增效作用,其表面活性的变化规律与在纯水和NaCl水溶液中基本相同,表明阴阳离子表面活性剂混合体系具有优异的抗矿化水性能．这些结果可用阴、阳表面活性离子的电性作用解释．     

正、负离子表面活性剂凝胶化正丁醇

利用正、负离子表面活性剂混合体系月桂酸钠/十六烷基三甲基溴化铵(SL/CTAB)成功实现了正丁醇的凝胶化, 并借助流变仪、扫描电子显微镜(SEM)研究了该凝胶的流变性质和微观形貌. 实验发现, 正、负离子表面活性剂的浓度及混合比例对正丁醇凝胶的形成具有较大影响, 只有在合适的浓度和混合比例下正丁醇才能被有效地凝胶化. 在正丁醇能够形成凝胶的前提下, 固定正、负离子表面活性剂混合体系中某一组分的浓度, 体系的粘度随着另一组分浓度的增加而增大. 流变结果表明该凝胶具有剪切变稀的非牛顿流体特性. 微观形貌的研究表明所形成的凝胶具有典型的三维网络结构, 厚度相对均一的带状纤维是组成网络的结构单元. 进一步的研究表明, 正、负离子表面活性剂碳氢链的疏溶剂作用、极性头基间的静电吸引作用、表面活性剂与正丁醇分子间的氢键作用对凝胶的形成起到重要的作用.     

Protein binding onto surfactant-based synthetic vesicles

Synthetic vesicles were prepared by mixing anionic and cationic surfactants, aqueous sodium dodecylsulfate with didodecyltrimethylammonium or cetyltrimethylammonium bromide. The overall surfactant content and the (anionic/cationic) mole ratios allow one to obtain negatively charged vesicles. In the phase diagram, the vesicular region is located between a solution phase, a lamellar liquid crystalline dispersion, and a precipitate area. Characterization of the vesicles was performed by electrophoretic mobility, NMR, TEM, and DLS and we determined their uni-lamellar character, size, stability, and charge density. Negatively charged vesicular dispersions, made of sodium dodecylsulfate/didodecyltrimethylammonium bromide or sodium dodecylsulfate/cetyltrimethylammonium bromide, were mixed with lysozyme, to form lipoplexes. Depending on the protein/vesicle charge ratio, binding, surface saturation, and lipoplexes flocculation, or precipitation, occurs. The free protein in excess remains in solution, after binding saturation. The systems were investigated by thermodynamic (surface tension and solution calorimetry), DLS, CD, TEM, 1H NMR, transport properties, electrophoretic mobility, and dielectric relaxation. The latter two methods give information on the vesicle charge neutralization by adsorbed protein. Binding is concomitant to modifications in the double layer thickness of vesicles and in the surface charge density of the resulting lipoplexes. This is also confirmed by developing the electrophoretic mobility results in terms of a Langmuir-like adsorption isotherm. Charges in excess with respect to the amount required to neutralize the vesicle surface promote lipoplexes clustering and/or flocculation. Protein-vesicle interactions were observed by DLS, indicating changes in particle size (and in their distribution functions) upon addition of LYSO. According to CD, the bound protein retains its native conformation, at least in the SDS/CTAB vesicular system. In fact, changes in the alpha-helix and beta-sheet conformations are moderate, if any. Calorimetric methods indicate that the maximum heat effect for LYSO binding occurs at charge neutralization. They also indicate that enthalpic are by far the dominant contributions to the system stability. Accordingly, energy effects associated with charge neutralization and double-layer contributions are much higher than counterion exchange and dehydration terms.     

Synthesis of Poly(3,4-ethylenedioxythiophene) Hollow Spheres in CTAB/DBS — Mixed Surfactant Solutions

Summary: Hollow microspheres of PEDOT (poly(3,4-ethylenedioxythiophene) ranging from 0.5 to 10 µm have been synthesized by chemically oxidative polymerization of EDOT(3,4-ethylenedioxythiophene) using ammonium persulfate in a catanionic surfactant solution obtained by mixing cetyltrimethylammonium bromide (CTAB) and sodium dodecylbenzenesulfonate (SDBS). The effect of the molar ratio of CTAB to SDBS on the morphology of the PEDOT oxidation products has been investigated using SEM and TEM and by an analysis of the structural properties using UV-visible, FTIR and Raman spectroscopies, elemental analysis and conductivity measurements. The electro-catalytic activity of PEDOT hollow microspheres for the oxidation of ascorbic acid was investigated by cyclic voltammetry in a pH 6 citrate/phosphate buffer solution and compared to the activity of granular PEDOT particles formed in the absence of the catanionic surfactant.     

Characterizing assembly morphology changes during solubilization process of dimyristoyl phosphocholine vesicles by n-dodecyl triethylammonium bromide

In the present work, the assembly morphology changes during the solubilization process of the sonicated unilamellar vesicles from dimyristoyl phosphocholine (DMPC) by a cationic surfactant, n-dodecyl triethylammonium bromide (DTEAB) were well characterized with DSC, FF-TEM and DLS and fluorescence probes technique. Based on an analysis on the above results, a primary multi-stage model was brought forward to sketch the assembly morphology changes during the DMPC vesicle solubilization by DTEAB. In comparison with classical models, vesicles division, tubule-like structure formation and fission to vesicle were found in the middle stages of this model. Additionally, it is the first time that the transversally-cut profiles of tubule-like structures were observed during vesicle solubilization process.     

Role of the surfactant headgroup on the counterion specificity in the micelle-to-vesicle transition through salt addition

A transition from micelles to vesicles is reported when salts are added to a catanionic micellar solution composed of sodium dodecylcarboxylate (SL) and dodecyltrimethylammonium bromide (DTAB), with an excess of SL. The counterion binding and increase in aggregate size was monitored by mass spectrometry, rheology and dynamic light scattering measurements, whereas the vesicles were characterized by freeze-fracture and cryo-transmission microscopy experiments. The effect of counterions on the formation of vesicles was studied and compared to a previously studied catanionic system with a sulfate head group, SDS/DTAB. As in the latter case, no anion specificity was found, while large differences in the hydrodynamic radii of the formed objects were observed, when the cation of the added salt was varied. A classification of the cations could be made according to their ability to increase the measured hydrodynamic radii. It is observed that, if the sulfate headgroup of the anionic surfactant is replaced by a carboxylic group, the order of the ions is reversed, i.e. it follows the reversed Hofmeister series. Different morphologies are observed as the ionic strength of the system is increased. The aggregates are analogous to those found in the SDS/DTAB system.     

Silicone nanocapsules templated inside the membranes of catanionic vesicles

A simple and effective way to synthesize hollow silicone resin particles of controlled diameter is presented. The synthesis utilizes catanionic vesicles as templates for the polycondensation/polymerization processes of 1,3,5,7-tetramethylcyclotetrasiloxane (D4H) within their membranes. Two different surfactant systems were used to form the vesicular templates: mixtures of dodecyltrimethylammonium bromide (DTAB) and sodium dodecylbenzenesulfonate (SDBS) in the cationic (the DTAB/SDBS system) or anionic (the SDBS/DTAB system) rich region of the phase diagram. The templates obtained from these surfactant mixtures form spontaneously unilamellar vesicles in aqueous solution. The vesicular templates swell upon addition of D4H, thus increasing their size. The silicone resin was obtained in acid- or base-catalyzed polycondensation and ring-opening polymerization processes of D4H. In the case of the DTAB/SDBS system the formation of a densely cross-linked silicone material with SiO3/2 units allowed the nanocapsules to retain the vesicular shape after removal of the template, whereas in the SDBS/DTAB system, the polymer produces capsules which are too smooth to support surfactant lysis. The morphology of the silicone nanocapsules was analyzed using transmission electron microscopy (TEM) and, in some cases, atomic force microscopy (AFM). TEM and AFM reveal discrete hollow particles with a small amount of linked or aggregated hollow silica shells.     

Interfacial molecular array behaviors of mixed surfactant systems based on sodium laurylglutamate and the effect on the foam properties

The foam properties of mixtures of an eco-friendly amino-acid derived surfactant sodium lauroylglutamate (LGS) interacting with cationic surfactant dodecyl trimethyl ammonium bromide (DTAB), nonionic surfactant laurel alkanolamide (LAA) and anionic surfactant sodium dodecyl sulfonate (SDS), were investigated, respectively. It was amazing that the three investigated binary-mixed systems all showed obviously synergism effect on foaming, though LGS/DTAB catanionic mixture showed remarkable synergistic effect with no surprise. The equilibrium and dynamic surface activity, along with the interfacial molecular array behaviors of binary-mixed systems with different molar ratios at air/water surface were also studied. Moreover, the theoretical simulation was employed to investigate how the interfacial behaviors of surfactants at air/water surface affected the foam properties. The study might provide the meaningful guidance for utilizing the LGS-based systems, especially in constructing eco-friendly foam systems in the application areas of cosmetics, medicine and detergent.     

Specific alkali cation effects in the transition from micelles to vesicles through salt addition

The transition of ionic micelles to vesicles with added salts is explored in this paper. The catanionic surfactant solution was comprised of sodium dodecylsulfate (SDS) and dodecyltrimethylammonium bromide (DTAB) with an excess of SDS. The micellar size increased with concentration for all salts. No anion specificity was found, probably because of the excess of SDS. However, when the cation of the added salt was varied, large differences were observed in the hydrodynamic radii of the aggregates. A classification of the cations according to their ability to increase the measured hydrodynamic radii follows a Hofmeister series. The change in aggregate size can be explained by modified counterion binding and dehydration of the surfactant headgroups.