Estimation of L-dopa from Mucuna pruriens LINN and formulations containing M. pruriens by HPTLC method

A selective, precise, and accurate high-performance thin-layer chromatographic (HPTLC) method has been developed for the analysis of L-dopa in Mucuna pruriens seed extract and its formulations. The method involves densitometric evaluation of L-dopa after resolving it by HPTLC on silica gel plates with n-butanol-acetic acid-water (4.0+1.0+1.0, v/v) as the mobile phase. Densitometric analysis of L-dopa was carried out in the absorbance mode at 280 nm. The relationship between the concentration of L-dopa and corresponding peak areas was found to be linear in the range of 100 to 1200 ng/spot. The method was validated for precision (inter and intraday), repeatability, and accuracy. Mean recovery was 100.30%. The relative standard deviation (RSD) values of the precision were found to be in the range 0.64-1.52%. In conclusion, the proposed TLC method was found to be precise, specific and accurate and can be used for identification and quantitative determination of L-dopa in herbal extract and its formulations.     

Development and validation of a visible absorption densitometry method for quantitation of conessine in Holarrhena antidysenterica (Kurchi)

A selective, precise, and accurate high-performance thin-layer chromatographic (HPTLC) method has been proposed for the analysis of conessine in Holarrhena antidysenterica. The method involves visible densitometric evaluation of conessine resolving it by HPTLC on aluminium-based silica gel plates. For visible densitometric evaluation, peak areas were recorded at 520 nm after the resolved bands were derivatized with Dragendorff's reagent and then sprayed with a 10% solution of aqueous sodium nitrite which resulted in reddish brown color. The correlation between the concentration and area was found to be linear within the range of 10 to 60 ng/spot. The method was validated for precision (interday and intraday), repeatability, and accuracy. Mean recovery for conessine was 98.34-100.25%. The method was applied for the quantitation of conessine in Kurchi. The proposed HPTLC method was found to be precise, specific, sensitive, and accurate and can be used for routine analysis of Kurchi.     

Development and validation of a TLC-densitometric method for the simultaneous quantitation of strychnine and brucine from Strychnos spp. and its formulations

A simple, sensitive, and specific thin-layer chromatography densitometric method has been developed for the simultaneous quantitation of strychnine and brucine. These two marker compounds are quantitated in the seeds of Strychnos nux-vomica, Strychnos ignatii, and its formulations. The method involves densitometric evaluation of strychnine and brucine after resolving it by high-performance TLC on silica gel plate with toluene-ethyl acetate-diethyl amine-methanol (7:2:1:0.3 v/v) as the mobile phase. The method is validated for precision (interday and intraday), repeatability, and accuracy. The relationship between the concentration of standard solutions and the peak response is linear within the concentration range of 160 to 480 ng/spot for strychnine and 80 to 480 ng/spot for brucine. Instrumental precision is found to be 0.54 and 0.78 (% CV), and repeatability of the method is 1.01 and 1.06 (% CV) for strychnine and brucine, respectively. Accuracy of the method is checked by recovery study conducted at three different levels and the average percentage recovery is found to be 99.13% for strychnine and 100.16% for brucine. The proposed HPTLC method for the simultaneous quantitation of strychnine and brucine is found to be simple, precise, specific, sensitive, and accurate, and it can be used for routine quality control of raw material of Strychnos spp. It also can be applied in quantitating any of these marker compounds in other formulations.     

High-performance thin-layer chromatography densitometric method for the quantification of harmine, harmaline, vasicine, and vasicinone in Peganum harmala

Peganum harmala Linn. seed is a reputed drug of the Indian systems of medicine. We report a simple high-performance thin-layer chromatography (HPTLC) densitometric method for the quantification of 4 alkaloids, viz., harmine, harmaline, vasicine, and vasicinone from P. harmala seed. The 4 compounds were resolved in ethyl acetate-methanol-ammonia (7 + 1 + 0.3, v/v/v) mobile phase. The method was validated for precision, repeatability, and accuracy. Instrumental precision was 0.27, 1.53, 0.39, and 1.15% [relative standard deviation (RSD)] and repeatability of the method was 1.01, 0.79, 0.13, and 1.62% RSD for harmine, harmaline, vasicine, and vasicinone, respectively. Accuracy of the method was checked by a recovery study conducted at 3 different levels, and the average recovery was 97.88% for harmine, 97.69% for harmaline, 98.38% for vasicine, and 98.28% for vasicinone. The 4 compounds were quantified in P. harmala seed using the method, and it was found to contain 0.44, 0.096, 0.25, and 0.0007% (w/w) of each, respectively. The proposed HPTLC densitometric method for the quantification of the 4 compounds was found to be simple, precise, specific, sensitive, and accurate. It can be used for routine quality control of P. harmala seed and has the ability to quantify the 4 marker compounds in the formulations containing P. harmala. It also can be used to quantify any of these marker compounds in other herbal drugs.     

Estimation of berberine in ayurvedic formulations containing Berberis aristata

A sensitive, simple, rapid, and efficient high-performance thin-layer chromatographic (HPTLC) method has been developed and validated for the analysis of berberine in marketed Ayurvedic formulations containing Berberis aristata DC for regulatory purposes. Chromatography of methanolic extracts of these formulations was performed on silica gel 60 F254 aluminum-backed TLC plates of 0.2 mm layer thickness. The plate was developed up to 66 mm with the ternary-mobile phase butanol-acetic acid-water (8 + 1 + 1, v/v/v) at 33 +/- 5 degrees C with 5 min of tank saturation. The marker, berberine, was quantified at its maximum absorbance of 350 nm. The limit of detection and limit of quantitation values were found to be 5 and 10 ng/spot. The linear regression analysis data for the calibration plot showed a good linear relationship with correlation coefficient = 0.9994 in the concentration range of 10 to 50 ng/spot for berberine with respect to peak area. The instrumental precision was found to be 0.49% coefficient of variation (CV), and repeatability of the method was 0.73% CV. Recovery values from 98.27 to 99.11% indicate excellent accuracy of the method. The developed HPTLC method is very accurate, precise, and cost-effective, and it has been successfully applied to the assay of marketed formulations containing B. aristata for determination of berberine.     

Determination of cimetidine,famotidine, and ranitidine hydrochloride in the presence of their sulfoxide derivatives in pure and dosage forms by high-performance thin-layer chromatography and scanning densitometry

A selective, precise, and accurate method was developed for the determination of cimetidine (C), famotidine (F), and ranitidine hydrochloride (R x HCl) in the presence of their sulfoxide derivatives. The method involves quantitative densitometric evaluation of mixtures of the drugs and their derivatives after separation by high-performance thin-layer chromatography on silica gel plates (10 x 20 cm) with ethyl acetate-isopropanol-20% ammonia (9 + 5 + 4, v/v) as the mobile phase for both C and F and ethyl acetate-methanol-20% ammonia (10 + 2 + 2, v/v) as the mobile phase for R x HCl; Rf values for C, F, and R x HCl and their corresponding derivatives were 0.85 and 0.59, 0.73 and 0.41, and 0.56 and 0.33, respectively. Developing time was approximately 20 min. For densitometric evaluation, peak areas were recorded at 218, 265, and 313 nm for C, F, and R x HCl, respectively. The relationship between concentration and the corresponding peak area was plotted for the ranges of 5-50 microg/spot for C and 2-20 microg/spot for F and R x HCl. Mean recoveries were 100.39 +/- 1.33, 99.77 +/- 1.30, and 100.09 +/- 0.69% for C, F, and R x HCl, respectively. The proposed method was used successfully for stability testing of the pure drugs in the presence of up to 90% of their degradates, in bulk powder and dosage forms. The results obtained were analyzed statistically and compared with those obtained by the official methods.     

Stability‐Indicating Methods for the Determination of Rofecoxib

Two stability indicating methods have been developed for determining rofecoxib in the presence of its degradation product. The first suggested method is high performance liquid chromatography (HPLC), in which analysis is carried out using hypersil BDS C18 column (250 × 4.6 mm I.D.) with mobile Phase consisting of 0.05 M phosphate buffer (pH 3.5) and acetonitrile (70:30 v/v). A linear relationship was obtained between the detector response at 225 nm and the corresponding concentration of the studied rofecoxib in the concentration range (1–6 μg / 10 μl) with mean % recovery of 99.80 ± 0.405. The second method depends on the quantitative densitometric evaluation of thin layer chromatograms (HPTLC) with mobil phase consisting of toluene: chloroform: methanol (60: 35: 5 v/v/v) by using fluorescent high performance silica gel 60 plate. A linear relationship was obtained between peak area and the concentration of the cited drug in the range 1–6 μg/spot with a mean % recovery of 99.79 ± 0.185. The suggested methods are precise, accurate, rapid and prove their specificity in the presence of its degradation products. Both procedures are successfully applied to determine the drug in the presence of its degradation product and also in their pharmaceutical formulations.     

Determination of Sumatriptan and Zolmitriptan in Presence of Their Corresponding Degradation Products by HPTLC Methods

Accurate, sensitive, and precise high performance thin layer chromatographic (HPTLC) methods were developed and validated for the determination of sumatriptan and zolmitriptan in presence of their degradation products. Sumatriptan was separated from its degradation products and analyzed on TLC silica gel 60 F₂₅₄ plates using chloroform–ethyl acetate–methanol–ammonia (4:3:3:0.1, v/v) as a developing system followed by densitometric measurement of the bands at 228 nm. Zolmitriptan was determined using chloroform–ethyl acetate–methanol–ammonia (3:3:3:1, v/v) as a developing system followed by densitometric measurement at 222 nm. The methods were validated over a range of 0.5–4 μg/spot for sumatriptan and 0.5–3 μg/spot for zolmitriptan. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in their pharmaceutical formulations.     

Simultaneous determination of amoxycillin trihydrate and clavulanate potassium in pharmaceutical preparations by thin-layer chromatography/densitometry

A simple and rapid densitometric method has been developed for the simultaneous determination of amoxycillin trihydrate and clavulanate potassium in pharmaceutical preparations. After extraction of the analytes with distilled water, the extracts were spotted on precoated silica gel plates, which were then eluted with butyl acetate-methanol-glacial acetic acid-water (15 + 7.5 + 7.5 + 3, v/v). Quantitative evaluation was performed by measuring the absorbance reflectance of the analyte spots at lambda = 240 nm. The densitometric method is rapid, selective, precise, and accurate and, thus, can be used for routine analysis of pharmaceutical preparations in quality control laboratories of the pharmaceutical industry.     

Determination of Thymol in Commercial Formulation,Essential Oils,Traditional, and Ultrasound-Based Extracts of Thymus vulgaris and Origanum vulgare Using a Greener HPTLC Approach

In the literature, greener analytical approaches for determining thymol in its commercial formulations, plant-based phytopharmaceuticals, and biological fluids are scarce. As a result, the goal of this study is to develop and validate a normal-phase “high-performance thin-layer chromatography (HPTLC)” method for determining thymol in commercial formulations, essential oils, traditional extracts (TE), and ultrasound-based extracts (UBE) of Thymus vulgaris and Origanum vulgare obtained from various geographical regions. The greener mobile phase for thymol analysis was a binary combination of cyclohexane and ethyl acetate (85:15, v/v). The derivatized densitometric analysis of thymol was carried out under visible mode at 530 nm utilizing anisaldehyde-sulfuric acid as a derivatizing/visualizing agent. In the 10–2000 ng/band range, the greener normal-phase HPTLC method was linear. Furthermore, for thymol analysis, the proposed analytical approach was simple, quick, inexpensive, accurate, precise, robust, sensitive, and greener. The thymol contents in commercial formulation were computed as 7.61% w/w. In general, the thymol contents were maximum in essential oils of T. vulgaris and O. vulgare compared to the other sample matrices studied. The thymol contents of TE of T. vulgaris and O. vulgare of different geographical regions were significantly low compared to their UBE extract. Using 12 distinct components of green analytical chemistry, the overall “analytical GREEnness (AGREE)” scale for the proposed analytical approach was computed 0.79, showing the good greener nature of the proposed analytical approach. Overall, the greener normal-phase HPTLC technique was found to be reliable for determining thymol in commercial formulations and plant-based phytopharmaceuticals.     

Development of a stability indicating HPTLC method for the estimation of olanzapine in pharmaceutical dosage forms

We report herein an accurate, precise, and economical stability indicating high performance thin layer chromatographic (HPTLC) method developed to assess the safety of olanzapine in pharmaceutical formulations. Olanzapine was subjected to forced degradation studies to assess the effect of environmental conditions on its stability. Stress conditions such as hydrolysis under acidic and alkaline environment, degradation and oxidation by heat, light and air were used to study the stability of olanzapine. Mobile phase comprising of toluene: methanol (5:5 v/v) and aluminum plate pre-coated with silica gel 60 F₂₅₄ as a stationary phase were used for the development of chromatogram by HPTLC technique. Densitometric analysis of olanzapine carried out at 297 ​nm gave sharp symmetrical peak with R_f value of 0.50 and a satisfactory baseline resolution for all components. The drug was found to undergo degradation under acidic, alkaline and oxidative conditions. A single distinct peak in acidic and alkaline media while two peaks obtained as a result of oxidative degradation were well resolved along with the parent drug. The degradation products and parent drug showed significantly different R_f values. The developed HPTLC method gave quick and reproducible results for the olanzapine content in the tablets. The mean recoveries were 100.75% which confirms accuracy of the proposed method. The method was further validated for specificity, ruggedness and robustness. Based on the results, it can be suggested that the developed HPTLC method is quite efficient in separating the olanzapine from its degradation products; hence it can be used by pharmaceutical industries and regulatory bodies for the routine analysis of olanzapine in various pharmaceutical dosage forms.     

Validated HPTLC method for quantitative determination of gallic acid in stem bark of Myrica esculenta Buch.-Ham. ex D. Don, myricaceae

A simple, rapid, and precise HPTLC method was developed for quantitative estimation of gallic acid in stem bark of Myrica esculenta, family Myricaceae. Separation was performed on silica gel 60F254 HPTLC plates using toluene-ethyl acetate-formic acid-methanol (3 + 3 + 0.6 + 0.4, v/v/v/v) mobile phase for separation of the extracted components. The determination was carried out in the UV densitometric absorbance-reflection mode at 280 nm. The amount of gallic acid in free and combined form in the stem bark powder was found to be 0.276 and 0.541%, respectively, on a dry weight basis. The method was validated in terms of linearity, accuracy, precision, and specificity according to International Conference on Harmonization guidelines. Gallic acid response was found to be linear over a broad concentration range of 0.4-2.0 microg/band. LOD and LOQ were 0.103 and 0.312 microg/spot, respectively. The developed method is capable of quantifying amounts of gallic acid in stem bark powder of M. esculenta.     

A rapid and highly sensitive stability-indicating high-performance thin-layer chromatography technique for the determination of tedizolid phosphate with a classical univariate calibration

No high-performance thin-layer chromatography (HPTLC) techniques have been established for the determination of tedizolid phosphate (TDZP) in pharmaceutical products or physiological fluids. Therefore, a rapid and highly sensitive stability-indicating HPTLC technique has been developed for the determination of TDZP in commercial formulations with a classical univariate calibration. The HPTLC‒densitometry analysis of TDZP was carried out via chloroform‒methanol (90:10, V/V) mobile phase. The determination of TDZP was performed at the wavelength of 300 nm. The proposed HPTLC technique was linear in the range of 10‒2000 ng band^‒1. In addition, the method was found to be highly accurate (% recovery = 98.53‒101.74%), precise (%CV = 0.67‒0.91%), robust (%CV = 0.83‒0.86%), highly sensitive (LOD = 3.41 ng band^‒1, LOQ = 10.23 ng band^‒1) for the determination of TDZP. The proposed technique was also able to detect TDZP in the presence of its degradation products under various stress conditions and it can be considered as a stability-indicating method. The proposed HPTLC technique was applied for the analysis of TDZP in its commercial formulations. The TDZP contents of commercial tablets and injection were determined as 98.41% and 101.23%, respectively. These results suggested that the proposed HPTLC technique can be applied for the routine analysis of TDZP in its commercial products and newly established formulations.

     

Simultaneous HPTLC and RP-HPLC methods for determination of bumadizone in the presence of its alkaline-induced degradation product

Accurate, selective, sensitive and precise HPTLC‐densitometric and RP‐HPLC methods were developed and validated for determination of bumadizone calcium semi‐hydrate in the presence of its alkaline‐induced degradation product and in pharmaceutical formulation. Method A uses HPTLC‐densitometry, depending on separation and quantitation of bumadizone and its alkaline‐induced degradation product on TLC silica gel 60 F₂₅₄ plates, using hexane–ethyl acetate–glacial acetic acid (8:2:0.2, v/v/v) as a mobile phase followed by densitometric measurement of the bands at 240 nm. Method B comprises RP‐HPLC separation of bumadizone and its alkaline‐induced degradation product using a mobile phase consisting of methanol–water–acetonitrile (20:30:50, v/v/v) on a Phenomenex C₁₈ column at a flow‐rate of 2 mL/min and UV detection at 235 nm. The proposed methods were successfully applied to the analysis of bumadizone either in bulk powder or in pharmaceutical formulation without interference from other dosage form additives, and the results were statistically compared with the established method. Copyright © 2011 John Wiley & Sons, Ltd.     

Simultaneous quantification of withanolides in Withania somnifera by a validated high-performance thin-layer chromatographic method

This paper describes a sensitive, selective, specific, robust, and validated densitometric high-performance thin-layer chromatographic (HPTLC) method for the simultaneous determination of 3 key withanolides, namely, withaferin-A, 12-deoxywithastramonolide, and withanolide-A, in Ashwagandha (Withania somnifera) plant samples. The separation was performed on aluminum-backed silica gel 60F254 HPTLC plates using dichloromethane-methanol-acetone-diethyl ether (15 + 1 + 1 + 1, v/v/v/v) as the mobile phase. The withanolides were quantified by densitometry in the reflection/absorption mode at 230 nm. Precise and accurate quantification could be performed in the linear working concentration range of 66-330 ng/band with good correlation (r2 = 0.997, 0.999, and 0.996, respectively). The method was validated for recovery, precision, accuracy, robustness, limit of detection, limit of quantitation, and specificity according to International Conference on Harmonization guidelines. Specificity of quantification was confirmed using retention factor (Rf) values, UV-Vis spectral correlation, and electrospray ionization mass spectra of marker compounds in sample tracks.     

High-performance thin-layer chromatography densitometric method for simultaneous quantitation of phyllanthin, hypophyllanthin, gallic acid, and ellagic acid in Phyllanthus amarus

Whole plant of Phyllanthus amarus Linn. is a reputed drug of the Indian systems of medicine that is used as hepatoprotective agent. A simple high-performance thin-layer chromatography (HPTLC) densitometric method has been developed for the simultaneous quantitation of phyllanthin, hypophyllanthin, gallic acid, and ellagic acid in the whole plant of P. amarus. They were found at levels of 0.37, 1.16, 0.36, and 0.17% (w/w), respectively. The method was validated for precision, repeatability, and accuracy. Instrumental precision was found to be 0.54, 0.93, 0.08, and 0.78% (coefficient of variation, CV); repeatability of the method was 1.01, 0.79, 0.98, and 1.06% (CV) for phyllanthin, hypophyllanthin, gallic acid, and ellagic acid, respectively. Accuracy of the method was determined by a recovery study conducted at 3 different levels, and the average recovery was found to be 99.09% for phyllanthin, 99.27% for hypophyllanthin, 98.69% for gallic acid, and 100.49% for ellagic acid. The proposed HPTLC method was found to be simple, precise, specific, sensitive, and accurate and can be used for routine quality control of raw material of P. amarus and formulations containing P. amarus. It also has the applicability in quantitating any of these marker compounds in other drugs.     

Simultaneous estimation of pantoprazole and domperidone in pure powder and a pharmaceutical formulation by high-perfomance liquid chromatography and high-performance thin-layer chromatography methods

This paper describes validated high-performance liquid chromatography (HPLC) and high-performance thin-layer chromatography (HPTLC) methods for the simultaneous estimation of pantoprazole (PANT) and domperidone (DOM) in pure powder and capsule formulations. The HPLC separation was achieved on a Phenomenex C18 column (250 mm id, 4.6 mm, 5 pm) using 0.01 M, 6.5 pH ammonium acetate buffer-methanol-acetonitrile (30 + 40 + 30, v/v/v, pH 7.20) as the mobile phase at a flow rate of 1.0 mL/min at ambient temperature. The HPTLC separation was achieved on an aluminum-backed layer of silica gel 60F254 using ethyl acetate-methanol (60 + 40, v/v) as the mobile phase. Quantification was achieved with ultraviolet (UV) detection at 287 nm over the concentration range 400-4000 and 300-3000 ng/mL with mean recovery of 99.35+/-0.80 and 99.08+/-0.57% for PANT and DOM, respectively (HPLC method). Quantification was achieved with UV detection at 287 nm over the concentration range 80-240 and 60-180 ng/spot with mean recovery of 98.40+/-0.67 and 98.75+/-0.71% for PANT and DOM, respectively (HPTLC method). These methods are simple, precise, and sensitive, and they are applicable for the simultaneous determination of PANT and DOM in pure powder and capsule formulations.     

Densitometric Determination of Hecogenin from Agave americana Leaf Using HPTLC

We report a simple TLC densitometric method for the quantification of hecogenin from the leaves of Agave americana using HPTLC. The method was validated for precision, repeatability and accuracy. The method was found to be precise with RSD of 0.78 (intraday) and 0.82 (interday) for different concentrations of hecogenin. Instrumental precision was 0.42 (% RSD) for hecogenin. The content of hecogenin in different samples was estimated by the proposed method and was found to be in the range of 0.05−0.14% w/w in the samples analysed. Accuracy of the method was checked by conducting recovery study at three different levels for hecogenin and the average percentage recovery was 98.98%, 101.92% and 103.33%, respectively. The TLC densitometric method developed for the quantification of hecogenin was found to be simple, precise, specific, sensitive, accurate and can be used in routine quality control. Revised: 7 and 25 April 2006     

Simultaneous estimation of acetylsalicylic acid and clopidogrel bisulfate in pure powder and tablet formulations by high-performance column liquid chromatography and high-performance thin-layer chromatography

This paper describes validated high-performance column liquid chromatographic (HPLC) and high-performance thin-layer chromatographic (HPTLC) methods for simultaneous estimation of acetylsalicylic acid (ASA) and clopidogrel bisulfate (CLP) in pure powder and formulations. The HPLC separation was achieved on a Nucleosil C8 column (150 mm length x 4.6 mm id, 5 microm particle size) using acetonitrile-phosphate buffer, pH 3.0 (55 + 45, v/v) mobile phase at a flow rate of 1.0 mL/min at ambient temperature. The HPTLC separation was achieved on an aluminum-backed layer of silica gel 60F254 using ethyl acetate-methanol-toluene-glacial acetic acid (5.0 + 1.0 + 4.0 + 0.1, v/v/v/v) mobile phase. Quantitation was achieved with UV detection at 235 nm over the concentration range 4-24 microg/mL for both drugs, with mean recoveries of 99.98 +/- 0.28 and 100.16 +/- 0.66% for ASA and CLP, respectively, using the HPLC method. Quantitation was achieved with UV detection at 235 nm over the concentration range of 400-1400 ng/spot for both drugs, with mean recoveries of 99.93 +/- 0.55 and 100.21 +/- 0.83% for ASA and CLP, respectively, using the HPTLC method. These methods are simple, precise, and sensitive, and they are applicable for the simultaneous determination of ASA and CLP in pure powder and formulations.     

Quantitative determination of canagliflozin in human plasma samples using a validated HPTLC method and its application to a pharmacokinetic study in rats

Canagliflozin (CNZ) is the first sodium–glucose co-transporter-2 inhibitor approved for treatment of type 2 diabetes mellitus. In the proposed work, a sensitive, rapid and validated high-performance thin-layer chromatography (HPTLC) method was established for the estimation of CNZ in human plasma for the first time. HPTLC analysis of CNZ and internal standard (sildenafil) was performed on glass coated silica gel 60 F₂₅₄ HPTLC plates using a binary mixture of chloroform–methanol 9:1 (%, v/v) as the mobile phase. Densitometric detection was done at 295 nm. Retardation factor values were obtained as 0.22 and 0.52 for the CNZ and the IS, respectively. The linearity range of CNZ was obtained as 200–3,200 ng/ml. A simple protein precipitation method was used for the extraction of analyte from plasma using methanol. The proposed HPTLC technique was validated for linearity, accuracy, precision and robustness. The proposed HPTLC technique was successfully utilized for the assessment of pharmacokinetic profile of CNZ in rats after oral administration. After oral administration, the peak plasma concentration of CNZ was obtained as 1458.01 ng/ml in 2 h. The proposed HPTLC method could be applied to the study of the pharmacokinetic profile of pharmaceutical formulations containing CNZ.