共查询到20条相似文献,搜索用时 31 毫秒
1.
The superconducting spoke cavity has been proposed to accelerate the proton in the low energy section of high power proton linac for an Accelerator Driven Sub-critical System (ADS).Considering that the High Order Modes (HOMs)in the superconducting cavity have far reaching influence on power dissipation and beam stability,the analysis of HOMs of the spoke cavity is needed.In this paper,we put emphasis on the analysis of HOMs of the spoke cavity and the HOMs coupler design. 相似文献
2.
The physical design of the 2-cell superconducting cavity is presented. The RF parameters of the cavity and HOMs (high order modes) are reported. In this paper, we put the emphasis on the analysis of the HOMs and interaction between beam and cavity. 相似文献
3.
The superconducting spoke cavity has been proposed to accelerate the proton in the low energy section of high power proton linac for an Accelerator Driven Sub-critical System (ADS). Considering that the High Order Modes (HOMs) in the superconducting cavity have far reaching influence on power dissipation and beam stability, the analysis of HOMs of the spoke cavity is needed. In this paper, we put emphasis on the analysis of HOMs of the spoke cavity and the HOMs coupler design. 相似文献
4.
通过分析束流频谱与高频腔高次模的相互作用,提出了计算单束流和双束流储存环中非均匀束团产生的高频腔高次模功率的方法,推导出了这两种情况下的一般通用公式,并对所得到的解析结果进行了比较和讨论. 相似文献
5.
6.
7.
Coaxial High Order Mode (HOM) couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cell TESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper. 相似文献
8.
《中国物理C(英文版)》2016,(5)
In this paper we will show a cavity and higher order mode(HOM) coupler designing scheme for the Circular Electron-Positron Collider(CEPC) main ring. The cavity radio frequency(RF) design parameters are shown in this paper. The HOM power is calculated based on the beam parameters in the Preliminary Conceptual Design Report(Pre-CDR). The damping results of the higher order modes(HOMs) and same order modes(SOMs) show that they reach the damping requirements for beam stability. 相似文献
9.
10.
The band gap of a photonic crystal (PhC) cavity intrinsically avoids HOM problems. In this paper, we present a new PBG structure based on the possible advantage of using hybrid structures and aperiodic lattices. This novel hybrid and aperiodically ordered cavity was designed for apparently higher Q-factor (more than 10300) and achieving large accelerating field gradient. The HOMs in the cavity are able to be absorbed efficiently. 相似文献
11.
E. Gusev N. Kot S. Krutikhin I. Kuptsov G. Kurkin I. Makarov N. Matyash L. Mironenko S. Motygin V. Osipov G. Ostreiko V. Petrov A. Popov E. Rotov I. Sedlyarov G. Serdobintsev A. Shteinke V. Tarnetsky A. Frolov K. Chernov V. Volkov 《Physics of Particles and Nuclei Letters》2006,3(1):S34-S36
This paper presents the RF system of VEPP-5 damping ring created at BINP Novosibirsk. The RF system operates at 700 MHz and consists of a generator based on KU-393 klystron, a transmitting waveguide with wave-to-coax adapters, an accelerating cavity, and a control system. Cavity HOMs are damped with resistive loads to eliminate the beam instability. Parameter results of cold measurement tests and high-power level tests are presented. 相似文献
12.
A pick-up parallel-setting high order mode coupler(pps-HOM coupler)has been fabricated at Peking University.It has been tested on a coaxial transmission line and a 2-cell TESLA-shape copper cavity.The test result of the 2-cell TESLA cavity shows that the coupler can cut off the fundamental mode TM010 and absorb HOMs electively.As its RF properties are insensitive to the probe dip length,there is no need to adjust the probe repeatedly during practical operation. 相似文献
13.
Coaxial High Order Mode (HOM) couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cellTESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper. 相似文献
14.
Liangjian Wen Shenghu Zhang Yongming Li Ruoxu Wang Hao Guo Cong Zhang Huan Jia Tiancai Jiang Chunlong Li Yuan He 《中国物理C(英文版)》2016,40(2):027004-027004
The China Accelerator-Driven Sub-critical System(CADS) is a high intensity proton facility to dispose of nuclear waste and generate electric power.CADS is based on a 1.5 GeV,10 mA CW superconducting(SC) linac as a driver.The high energy section of the linac is composed of two families of SC elliptical cavities which are designed with geometrical beta 0.63 and 0.82.In this paper,the 650 MHz β=0.63 SC elliptical cavity is studied,including cavity optimization,multipacting,high order modes(HOMs) and generator RF power calculation. 相似文献
15.
基于超导器的连续波运行的高流强质子/氘束被越来越多的大科学装置所采用。在流强低于10 mA情况下,用于加速低段粒子的超导腔的高阶模影响基本可以忽略,但是对于加速百mA强流的低超导腔,其高阶模损耗情况有待研究。近期北京大学设计并加工了一支=0.09、运行频率162.5 MHz的超导半波长谐振腔,用于研究非相对论低超导半波长谐振腔加速100 mA强流质子束时可能涉及到的关键物理问题。重点研究了这支半波长谐振腔内部高阶模损耗的问题,用时域和频域两种方法分别计算了腔的高阶模损失因子,同时计算了考虑加工误差下腔内发生高阶模共振激发的概率。 相似文献
16.
17.
18.
In accelerator RF cavities, there exists not only the fundamental mode which is used to accelerate the beam, but also higher order modes(HOMs). The higher order modes excited by the beam can seriously affect beam quality, especially for the higher R/Q modes. 1.3 GHz low-loss 9-cell superconducting cavity as a candidate for ILC high gradient cavity, the properties of higher order mode has not been studied carefully. IHEP based on existing low loss cavity, designed and developed a large grain size 1.3 GHz low-loss 9-cell superconducting cavity(IHEP02cavity). The higher order mode coupler of IHEP02 used TESLA coupler's design. As a result of the limitation of the mechanical design, the distance between higher order mode coupler and end cell is larger than TESLA cavity.This paper reports on measured results of higher order modes in the IHEP02 1.3 GHz low-loss 9-cell superconducting cavity. Using different methods, Q e of the dangerous modes passbands have been obtained. The results are compared with TESLA cavity results. R/Q of the first three passbands have also been obtained by simulation and compared with the results of the TESLA cavity. 相似文献
19.
A flexible high power RF test stand has been designed and constructed at IHEP to test a variety of 500 MHz superconducting RF components for the upgrade project of the Beijing Electron Positron Collider (BEPCⅡ), such as the input coupler, the higher order modes (HOMs) absorber and so on. A high power input coupler has been conditioned and tested with the RF power up to 250 kW in continuous wave (CW), traveling wave (TW) mode and 150 kW CW in standing wave (SW) mode. A prototype of the HOMs absorber has been tested to absorb power of 4.4 kW. An introduction of the test stand design, construction and high power tests is presented in this paper. 相似文献
20.
Physics of Atomic Nuclei - In this paper, two options for damping higher order modes (HOMs) using rectangular waveguides and corrugated cylindrical waveguides are considered. The tuning of the two... 相似文献