聚苯乙烯-b-聚氧乙烯-b-聚苯乙烯三嵌段共聚物的自组装

小分子表面活性剂、磷脂、接枝及嵌段共聚物等两亲分子在选择性介质中能够自组装形成特定的分子聚集体 [1,2 ] .嵌段共聚物自组装的某些行为具有生物膜模拟性 ,如最近发现的嵌段共聚物自组装囊泡 [3～ 5] .诸多因素影响着嵌段共聚物在稀溶液中的自组装行为 [6] .对于 ABA型三嵌     

聚氧乙烯-聚氧丙烯嵌段共聚物加溶作用的研究

本文对聚氧乙烯-聚氧丙烯嵌段共聚物Pluronic的加溶性质和机制进行了研究. 结果表明仅有合适的HLB值的样品才具有加溶作用. L64的水溶液对芳烃有加溶作用, 对烷烃几乎没有. 随温度升高,发生加溶作用的L64最小浓度下降. 此外, 水也能被加溶在L64的二甲苯溶液中. 加溶有水的反胶团的大小比加溶有二甲苯的正胶团要大得多. 紫外光谱与核磁共振谱的研究表明, 对于PPO-PEO嵌段共聚物, 被加溶的二甲苯插在胶团内部的PPO链段之间。     

ε-己内酯与D,L-丙交酯ABA型嵌段共聚物合成及作为药物载体的初步评价

“活性”中间体PCL-PLA-OAl<用环氧乙烷扩链生成含聚醚羟端基的预聚物,它与Teyssie催化剂反应后取代其中的异丙氧基生成“活性”的预聚物催化体系,进而引发CL 聚合生成PCL-PLA-PCL ABA型嵌段共聚物,它的机械性能优于AB型共聚物,断裂伸长增大约一倍,具有微观相分离结构和可控制的生物降解性能及药物释放性能。本文亦提供了内酯与交酯嵌段共聚的新途径。     

磷酰胆碱基pH敏感性ABA型嵌段共聚物的合成与胶束化

采用氯化亚铜/2,2-联二吡啶催化体系, 2,5-二溴己二酸二乙酯为引发剂, 甲醇为溶剂运用希莱克技术, 利用原子转移自由基聚合(ATRP)方法合成了ABA型三嵌段共聚物PDEAEMA-b-PMPC-b-PDEAEMA. ¹H NMR和GPC(凝胶渗透色谱)对聚合物组成、结构及分子量进行了表征, 利用透光率、粘度测定研究了嵌段共聚物溶液的pH敏感性, 利用表面张力测定、荧光探针和透射电镜研究了嵌段共聚物胶束化作用, 确定了共聚物水溶液的临界胶束浓度(CMC). 结果表明所合成的ABA型三嵌段共聚物水溶液具有pH敏感性, 其临界相变pH 7～7.5. 调节溶液pH值可实现嵌段共聚物胶束化形成“花状”胶束, 并测定了其临界胶束浓度.     

C9pPHCNa与C10TABr混合水溶液的表面吸附和胶团形成

羧酸盐Gemini表面活性剂C9pPHCNa与季铵盐表面活性剂十烷基三甲基溴化铵(C10TABr)混合水溶液的胶团生成能力、降低水表面张力的能力和效率均出现明显的增效.当C9pPHCNa在溶液中的摩尔分数(α1)为0.33时,cmcT(临界胶团总浓度)、γcmc(临界胶团总浓度对应的表面张力)、c20,T(降低20mN·m-1水表面张力所需的表面活性剂总浓度)这3个指标均达到最低值,分别为0.60mmo·lL-1、23.5mN·m-1和1.58×10-5mol·L-1.在所有考察的溶液比例范围内,二组分在混合胶团和表面吸附层中的组成均接近等摩尔比,表现出强烈的分子间相互作用.     

氧杂氟表面活性剂及其与同电性碳氢表面活性剂混合溶液的表面吸附和胶团形成

研究了四种氧杂氟表面活性剂及其与同电性直链碳氢表面活性剂混合体系的表面活性;考察了混合体系中的表面吸附和胶团形成现象.在吸附层中分子间有明显的互疏作用,在溶液中倾向于各自形成胶团.还讨论了反离子结合度不同对理想混合胶团的组成及cmc的计算的影响,提出了一般的计算式.实验测得这些氧杂氟表面活性剂有较低的胶团反离子结合度.     

Dendr.PE-PAA在水溶液中自聚集的NMR研究

用1H NMR自扩散系数,核弛豫和二维NOESY谱研究了新合成苄醚树枝体与丙烯酸杂化嵌段共聚物在水溶液中生成胶团的动态行为.体系中苄醚树枝体与丙烯酸杂化嵌段共聚物的各1H核的自旋-晶格弛豫时间（T1）、自旋-自旋弛豫时间（T2）、自扩散系数和二维NOESY中的交叉峰证明苄醚树枝体与丙烯酸杂化嵌段共聚物在水溶液中形成自聚集,且与不同浓度下聚集体有差别.     

芘在Pluronic两亲嵌段共聚物胶团中的增溶

用稳态荧光法研究芘（Py）在Pluronic两亲嵌段共聚物胶团水溶液中的增溶,结果表明共聚物分子中的PPO实际含量越大,越有利于Py的增溶。加入无机盐KCl导致生成了表面较少水化的较大胶团,并且由于KCl解离产生的离子使溶剂极性增加,这些因素促进了Py的增溶。     

氧杂氟表面活性剂及其与同电性碳氢表面活性剂混合溶液的表面吸附和胶团形成

研究了四种氧杂氟表面活性及其与同电性直链碳氢表面活性剂混合体系的表面活性;考察了混合体系中的表面吸附和胶团形成现象.在吸附层中分子间有明显的互疏作用,在溶液中倾向于各自形成胶团.还讨论了反离子结合度不同对理想混合胶团的组成CMC的计算的影响,提出了一般的计算式,实验测得这些氧杂氟表面活性剂有较低的胶团反离子结合度.     

不等链长的碳氟、碳氢正负离子表面活性剂混合体系的表面活性

研究了全氟辛酸钠与溴化十四烷基三甲铵混合水溶液的表面活性. 测定了不同比例混合物水溶液的表面张力-浓度曲线, 得出临界胶团浓度(cmc)及监 界胶团浓度时的溶液表面张力(γcmc)值. 应用Gibbs吸附公式及吸附层中两表面活性剂分子相互作用参数法求出表面总吸附量、吸附层组成及两表面活性剂分别吸附量等. 指示此吸附层具有多分子层性质. 这可能是碳氢、碳氟正负离子混合体系的特点.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.