Conformational behaviors of tetra-O-methylsulfinylcalix[4]arenes--an approach to control the conformation of thiacalix[4]arenes by oxidizing sulfur bridges

The conformational behaviors of all four stereoisomers [5(rctt), 5(rcct), 5(rtct), and 5(rccc)] of tetra-O-methylsulfinylcalix[4]arene were studied by the 1H NMR spectroscopic method. Variable-temperature (VT) NMR experiments of 5(rctt), 5(rcct), and 5(rtct) revealed that each compound adopted the same conformation as that in the crystals at low temperatures and exhibited a self-exchange between the two equivalent species of this conformation at elevated temperatures. The values of the activation enthalpy DeltaH for the self-exchange were similar (approximately 70 kJ mol-1). Further, the activation entropy DeltaS++ was more important for 5(rtct) (-40 J mol-1 K-1) than for 5(rctt) (-5 J mol-1 K-1) and 5(rcct) (-7 J mol-1 K-1); consequently, the exchange rate of 5(rtct) was 150-180 times less than that of the other isomers at 273 K. On the other hand, 5(rccc) was in an equilibrium state between cone and partial-cone conformers at 253 K with the molar ratio being 85:15, which was in reasonable agreement with the relative stability between the two conformers calculated by the ab initio molecular orbital method.     

Synthesis of dinuclear boron complexes of sulfinylcalix[4]arenes: Syn/Anti stereocontrol by the arrangement of the sulfinyl functions

Stereocontrol in the synthesis of dinuclear metal complexes of sulfinylcalix[4]arenes 2 has been achieved by the arrangement of sulfinyl functionalities. Thus, the treatment of the(rtct) isomer of 2 (2(rtct)) with an excess of Et(3)B affords syn dinuclear boron complex 4, while a similar treatment of rctt and rcct isomers 2(rctt) and 2(rcct) yields anti dinuclear complexes 5 and 6, respectively.     

Calix[4]arene derivatives monosubstituted at all four methylene bridges

The scope of the reaction of the tetrabromocalixarene derivative 2b with alcohols under solvolytic conditions in trifluoroethanol (TFE) or hexafluoroisopropanol (HFIP) was explored. The reaction proceeded readily with MeOH, EtOH, n-PrOH, ethylene glycol and i-PrOH affording preferentially the rccc isomer of the tetrasubstituted product. The methoxy derivative 6a undergoes isomerization upon attempted recrystallization from CHCl3/MeOH and its rcct and rctt forms were characterized by X-ray crystallography. Incorporation of hydroxy groups on the bridges was accomplished via solvolysis in AcOH, followed by LiAlH4 reduction of the acetoxy groups. Reaction of the tetra-(2-methylfuranyl)calixarene derivative 11 with benzyne followed by deoxygenation with Me3SiCl/NaI afforded in low yield the tetra-(4-methylnaphthyl)calix[4]arene derivative 12. Reaction of de-tert-butylated tetrabromo derivative 2a with m-xylene in HFIP followed by methylation of the crude product afforded the tetraxylyl derivative 14.     

Main-group-element calix[4]arenes: variable coordination and conformational isomerism at phosphorus and silicon

Treatment of calix[4]arene (1b) with trichloromethylsilane yields two conformers of calix[4]SiMe(OH), the cone 2b-C and the partial cone 2b-PC. These are isolated and structurally characterized, and their thermodynamic activation parameters are determined in solution [Ea = 117(3) kJ/mol, delta H = 5(4) kJ/mol]. Similar parameters are found for the p-tert-butylcalix[4]arene analogues 2a-C and 2a-PC. Deprotonation of 2b with butyllithium yields calix[4]SiMe(OLi) (8b). The structure of 8b is solvent dependent: 8b contains a five-coordinate silicon in THF and a four-coordinate silicon in benzene. Similar behavior is found for the p-tert-butylcalix[4]arene analogues. The five-coordinate phosphorus analogue of the anion in 8, p-tert-butylcalix[4]PMe (11a), is synthesized from the phosphonium triflate salt p-tert-butylcalix[4]PMe(OH)OTf (10a(OTf)) via treatment with butyllithium. The structure of 11a shows the geometry around phosphorus to be very close to a pure trigonal bipyramid. The X-ray structure of 10a(OTf) cannot be obtained, but its iodide analogue 10a(T) is synthesized and structurally characterized. The cation in 10a(I) adopts the partial cone conformation in the solid state, similar to 2b-PC. Treatment of 8b with methyl trifluoromethanesulfonate yields the methyl phenyl ether calix[4]SiMe(OMe) (3b). This species and its p-tert-butyl analogue 3a are structurally characterized. Both adopt the partial cone conformation. The SiMe group in 3b can be removed via treatment with fluoride to yield the monomethylated calix[4]arene 4b in 50-60% overall yield based on 1b.     

杯芳烃衍生聚合物用作毛细管气相色谱固定相的研究

合成了两种不同构象的杯芳烃衍生聚合物（杯芳冠醚聚硅氧烷ｃ－ｃ［４］ｃ５－ｐｓｏ和二乙氧基杯［４］芳烃聚硅氧烷ｐ－ｃ［４］－ｐｓｏ），并将其用作毛细管气相色谱固定液，使用温度高达３２０℃，对不同的极性化合物，特别是对酚类异构体有很好的分离能力。同时也研究了分离机理。     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Isolation and characterization of nongeminal cyclic methylphenylphosphazene tetramers

Heating pure samples of the cyclic phosphazenes, cis- or trans-[Me(Ph)PN](3), yielded mixtures of the cis and trans isomers of the cyclic phosphazene trimers, [Me(Ph)PN](3), and all four geometric isomers of the tetramers, [Me(Ph)PN](4). Varying the temperature and heating times changes the ratio of these components. Following the thermolysis by NMR spectroscopy indicated that only a mixture of the two isomeric trimers occurred initially. Longer heating times produced mixtures of the isomers of the tetramer. Column chromatography and solubility differences were used to separate each of the isomers of the tetramer. Spectroscopic and X-ray crystallographic studies suggest that the four different geometrical isomers of the tetramer can be described as cone, partial cone, 1,2-alternate, and 1,3-alternate by analogy to calix[4]arene.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Thiourea-linked upper rim calix[4]arene neoglycoconjugates: synthesis,conformations and binding properties

The thiourea group has been exploited to link two or four carbohydrate units at the upper rim of tetrapropoxycalix[4]arene derivatives in the cone conformation. Two synthetic methodologies were used, the first one consisting of the condensation of di- and tetraminocalix[4]arenes with the isothiocyanate of monosaccharides in dry CH2Cl2 at room temperature and the second one exploiting the condensation of an aminolactoside with a calixarene isothiocyanate. The first method allows the glycoconjugates to be obtained in 75-80% overall yields. The disfunctionalized derivatives exist in a closed flattened cone conformation in CDCl3 and CD3OD due to the formation of intramolecular hydrogen bonds involving the thiourea groups which are broken in DMSO-d6 to give an open flattened cone conformation. The thiourea groups act not only as linkers but also as binding units for anionic substrates as evidenced by solution 1H NMR and ESI-MS experiments. Turbidimetric analysis indicates that the tetraglucoside and tetragalactoside clusters give specific interactions with Concanavalin A (Con A) and peanut lectin (PNA), respectively. Both features show that the neoglycoconjugates could also be used as site specific molecular delivery systems.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.     

含噻二唑基的对叔丁基杯[4]芳烃衍生物的合成及表征

以对叔丁基杯[4]芳烃(1)为原料, 分别与1,2-二溴乙烷、1,3-二溴丙烷在碳酸钾的存在下进行选择性烷基化反应, 生成杯[4]芳烃衍生物2和3. 在氢氧化钠存在下, 化合物2和3与过量的含不同官能团的2-巯基噻二唑反应, 生成下缘含噻二唑基的杯芳烃衍生物4a～4c, 5a～5c, 其结构经¹H NMR, ¹³C NMR, IR, MS和元素分析确证.     

Synthesis and extraction properties of preorganized host molecules based on tetraamides of thiacalix[4]arene

Template effect of alkali metal ions was employed to prepare three isomers of tetraamide of p-tert-butylthiacalix[4]arene: cone, partial cone and 1,3-alternate. It was demonstrated that pre-organization of four amide fragments attached to the calix[4]arene platform has a strong macrocyclic cooperative effect on the extraction ability of the title hosts.     

Selective synthesis and isolation of all possible conformational isomers of proximally para-disubstituted calix[4]arene

All six possible conformational isomers of the proximally p-dibrominated calix[4]arene tetraalkyl ether, 1a-f*, were selectively synthesized by appropriate control of stereochemistry during di-O-alkylation reactions of 5,11-dibromocalix[4]arene syn-dialkyl ethers, namely, 5,11-dibromo-27,28-dihydroxy-25,26-dipropoxy-, 5,11-dibromo-25,26-dihydroxy-27,28-dipropoxy-, 5,11-dibromo-25,28-dihydroxy-26,27-propoxy-, and 5,11-dibromo-26,28-dihydroxy-25,27-dipropoxycalix[4]arenes. Their conformations were confirmed by (1)H and (13)C NMR spectroscopy and are cone for 1a (u(Br)(Pr), u(Br)(Pr), u(H)(Pr),u(H)(Pr)), partial cone for 1b (u(Br)(Pr), d(Br)(Pr), u(H)(Pr),u(H)(Pr)) and 1d (u(Br)(Pr), u(Br)(Pr), u(H)(Pr),d(H)(Pr)), 1,2-alternate for 1c (u(Br)(Pr), u(Br)(Pr), d(H)(Pr),d(H)(Pr)) and 1e (u(Br)(Pr), d(Br)(Pr), d(H)(Pr),u(H)(Pr)), and 1,3-alternate for 1f (u(Br)(Pr), d(Br)(Pr), u(H)(Pr),d(H)(Pr)). Although both 1c and 1e are in the 1,2-alternate conformation, the conformation of 1e was found to be strongly distorted and distinct from that of 1c.     

Annelated Calixarenes Composed of Calix[4]arenes with Hydroxy Groups in the Endo and Exo Position

Various phenol-derived calix[4]arenes (3) bearing four hydroxy groups in the exo position have been prepared by uncatalyzed condensation of suitable dimers or tetramers with formaldehyde in xylene in yields up to 44%. The tetra-tert-butyl compound (3a) has been shown by X-ray analysis to adopt a regular cone conformation (nearly identical in shape with the endo isomer) with two intramolecular O-H.O hydrogen bonds, while the corresponding dimer (6c) prefers a conformation (not possible in the calixarene) with two intramolecular O-H.pi(arene) interactions. Condensation of exo-calix[4]arenes 3f,g with free ortho positions (easily available by debutylation) with bisbromomethylated dimers gave annelated double (9) and triple (10) calixarenes consisting of endo- and exo-calix[4]arene substructures in yields up to 24% and 10%, respectively. Molecular dynamics calculations suggest that the exo-calixarene part in 9 is less mobile than the entirely flexible 3, while the endo-calixarene part shows a higher mobility than usual. A complete interconversion cone --> cone is impossible, however, which enables the construction of inherently chiral molecules.     

Synthesis of a phloroacetophenon[4]arene consisting of four isomers via the one-pot,acid-catalysed condensation of phloroacetophenone with benzaldehyde

A phloroacetophenon[4]arene (3) consisting of four isomers was synthesised for the first time via the condensation of phloroacetophenone and benzaldehyde in a one-pot reaction with refluxing toluene in the presence of catalytic amounts of TsOH·H₂O for a maximum yield of 64%. The conformational elucidation of four isomers (3a–d) by ¹H NMR spectroscopy and X-ray crystal structure analysis showed them to be cone, partial cone, 1,3-alternate and 1,2-alternate types of conformations, respectively.     

Synthesis and metal ion complexation studies of proton-ionizable calix

A series of novel N-chromogenic calix[4]arene azacrown ethers were synthesized as selective extractants of potassium ion. 1,3-Alternate calix[4]arene azacrown ethers were prepared by reacting 25,27-dipropyloxy-26,28-bis(5-chloro-3-oxapentyloxy) calix[4]arenes with p-toluenesulfonamide in the presence of potassium carbonate. The coupling reaction of calix[4]arene azacrown ether with 2-hydroxy-5-nitrobenzyl bromide in the presence of triethylamine in THF gave the chromogenic calix[4]arene azacrown ether in moderate yield. These compounds show high potassium selectivity over other metal ions as shown by two-phase extraction, bulk liquid membrane, and 1H NMR studies on a ligand-metal complex. It is assumed that the OH of the chromogenic group attached on nitrogen can assist the complexation by encapsulation of the metal.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Synthesis of 2-alkyl- and 2-carboxy-p-tert-butylcalix[4]arenes via the lithiation of tetramethoxy-p-tert-butylcalix[4]arene

[reaction: see text]. Tetramethoxy-p-tert-butylcalix[4]arene reacts readily with n-butyllithium to give a putative monolithiated intermediate that is substituted with alkyl halides and carbon dioxide to give in 60-75% yield conformationally mobile calix[4]arenes monosubstituted at the methylene bridge (2-position). 2-Alkyl- and 2-benzyl-substituted tetramethoxycalix[4]arenes are converted in 62-68% overall yield to the corresponding tetrahydroxy-p-tert-butylcalix[4]arenes by treatment with boron tribromide. The tetrahydroxy-p-tert-butylcalix[4]arenes exist in the cone conformation at room temperature in CDCl3 as judged by NMR spectroscopy.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.