Synthesis and physical behavior of amphiphilic dendrimers with layered organization of hydrophilic and hydrophobic blocks

Amphiphilic carbosilane dendrimers with novel architectural layout have been synthesized. These dendrimers contain peripheral groups consisting of covalently bound promesogenic fragments and hydrophilic (oligoethyleneglycolic) linkages which are connected to a carbosilane core in two distinct ways: as spacer or as tail arrangement. Such molecules have a block structure where the hydrophilic and hydrophobic blocks are distributed within the dendrimer forming layers of different polarity. The hydrophilic layer is either enclosed between two hydrophobic parts of the molecule or is situated on the periphery. The synthetic strategy for achieving these structures is described. The interfacial properties of the dendrimers were studied and the influence of the dendritic structure’s organization on the Langmuir film formation process is assessed.     

Synthesis and aqueous aggregation properties of amphiphilic surface-block dendrimers

[reaction: see text] A family of dendritic amphiphiles were synthesized from the natural metabolites of glycerol, succinic acid, and myristic acid. The surfaces of these dendrimers display different numbers of alkyl chains and carboxylic acids, varying the hydrophobic-to-hydrophilic ratio over a relatively broad range. In solution these dendritic amphiphiles form supramolecular structures, and these aggregates have been characterized by light microscopy, transmission electron microscopy, and tensiometry. These aggregates can entrap the hydrophobic species pyrene.     

Syntheses and properties of a series of amphiphilic polyacrylamides bearing two long alkyl chains and phosphatidylcholine analogous groups in the side chains

A novel vinyl monomer 2-{(3-acrylamidopropyl)dimethyl ammonio}ethyl 2′-isopropyl phosphate (AAPI) having phosphatidylcholine analogous moiety and a series of new acrylamide monomers containing two long alkyl chains [stearyloleylacrylamide (SOAAm), distearylacrylamide (SSAAm), and n-docosyloleylacrylamide (DOAAm)] were synthesized and characterized. The polyacrylamides ( Va, Vb , and Vc ) were obtained from radical copolymerization of SOAAm, SSAAm, or DOAAm with AAPI in the presence of AIBN as an initiator. The investigations of these copolymers were carried out by x-ray analysis method, DSC, TG-DTA, and viscosity measurement, respectively. The copolymer Vb containing distearyl groups as hydrophobic side chains shows a crystalline state at room temperature, and the ordered structure disappears at high temperature. The phase transition from a crystalline state to a liquid-crystalline state was observed obviously only for copolymer Vb . In addition, the II-A isotherms and A-T isobars of these copolymers were measured and their stable LB films were also prepared. © 1996 John Wiley & Sons, Inc.     

Anti-biofouling properties of comblike block copolymers with amphiphilic side chains

Surfaces of novel block copolymers with amphiphilic side chains were studied for their ability to influence the adhesion of marine organisms. The surface-active polymer, obtained by grafting fluorinated molecules with hydrophobic and hydrophilic blocks to a block copolymer precursor, showed interesting bioadhesion properties. Two different algal species, one of which adhered strongly to hydrophobic surfaces, and the other, to hydrophilic surfaces, showed notably weak adhesion to the amphiphilic surfaces. Both organisms are known to secrete adhesive macromolecules, with apparently different wetting characteristics, to attach to underwater surfaces. The ability of the amphiphilic surface to undergo an environment-dependent transformation in surface chemistry when in contact with the extracellular polymeric substances is a possible reason for its antifouling nature. Near-edge X-ray absorption fine structure spectroscopy (NEXAFS) was used, in a new approach based on angle-resolved X-ray photoelectron spectroscopy (XPS), to determine the variation in chemical composition within the top few nanometers of the surface and also to study the surface segregation of the amphiphilic block. A mathematical model to extract depth-profile information from the normalized NEXAFS partial electron yield is developed.     

Physicochemical properties of quaternized poly(amidoamine) dendrimers with four octyl chains

A cationic dendrimer-type tetrameric surfactant (C(8)qbG0) with four octyl chains and four ammonium groups was synthesized by the reaction of poly(amidoamine) dendrimers with generation of zero and glycidyldimethyloctylammonium bromide. The physicochemical properties of C(8)qbG0 and of their mixtures with sodium dodecyl sulfate (SDS) were characterized by investigating surface tension, electrical conductivity, fluorescence of pyrene, and dynamic light-scattering. The critical micelle concentration (cmc) of C(8)qbG0 was 13 mmol dm(-3) at the concentration of one terminal group and the surface tension at the cmc attained 34 mN m(-1). The occupied area of C(8)qbG0 was 1.94 nm(2) molecule(-1), indicating that the tetrameric dendrimers adsorb widely at the air/water interface. The fluorescence intensity ratio of the first-to-third band in the emission spectra of pyrene for C(8)qbG0 decreased from around the cmc obtained by the surface tension measurement. The hydrodynamic radius of C(8)qbG0 determined by dynamic light-scattering was about 1.3 nm. The addition of SDS to the aqueous solutions of C(8)qbG0 enhanced the surface activities; the mixtures exhibited lower cmc, lower surface tension, and higher solubilization of pyrene than SDS alone. It was found that the mixtures of C(8)qbG0 and SDS form large aggregates due to the interactions between their alkyl chains as well as hydrophilic groups.     

Synthesis, aggregation, and chiroptical properties of chiral, amphiphilic dendrimers

The syntheses of amphiphilic dendrimers based on 3,5-dihydroxybenzyl alcohol containing tri- or tetrafunctional chiral central cores and allyl ester termini are described. Water solubility is imparted to the dendrimers via a palladium-catalyzed deprotection of the peripheral allyl esters. This method affords complete deprotection of the carboxylate surface because, in contrast to the basic hydrolysis of methyl ester termini, the solubility of partially hydrolyzed intermediates is maintained throughout the course of the deprotection, thereby avoiding precipitation during the reaction. Chiroptical analysis indicates that the structure of the dendrimers collapses in water, resulting in an increased steric effect upon the central core that is manifested by lower optical rotatory power. However, contributions to the chiroptical properties from the dendron branch segments were not evident in water or organic media, suggesting that chiral substructures were not developing in the branch segments of the dendrimers. Multiangle light scattering studies revealed that the dendrimers experienced significant aggregation in aqueous media that decreased at higher generations. This behavior could be rationalized by a change in conformational preference from a disklike conformation at low generations to a more globular conformation at higher generations.     

Polysoaps with fluorocarbon hydrophobic chains

A series of amphiphilic copolymers is prepared by copolymerization of choline methacrylate with 1,1,2,2-tetrahydroperfluorooctyl methacrylate in varying amounts. The copolymers bearing fluorocarbon chains are studied concerning their effects on viscosity, solubilization and surface activity in aqueous solution, exhibiting a general behavior characteristic for polysoaps. The results are compared with the ones obtained for an analogous series of amphiphilic copolymers bearing hydrocarbon chains.     

Effects of structural modification on gene transfection and self-assembling properties of amphiphilic dendrimers

A library of novel amphiphilic, self-assembling dendrimers was designed and synthesised to evaluate the effects of structural changes on transfection efficiency.     

Self-assembly of facially amphiphilic dendrimers on surfaces

Facially amphiphilic dendrimers have been shown to provide significant difference in surface behavior due to subtle changes in structure. The monodendrons are capable of providing hydrophobic surfaces, while the didendrons provide superhydrophobic surfaces. This provides an example of how a molecular level change could result in significant changes in surface behavior. This difference is attributed to the conformational differences exhibited by these dendrimers on surfaces.     

A starlike amphiphilic graft copolymer with hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains

A well‐defined starlike amphiphilic graft copolymer bearing hydrophilic poly(acrylic acid) backbones and hydrophobic polystyrene side chains was synthesized by successive atom transfer radical polymerization followed by the hydrolysis of poly‐(methoxymethyl acrylate) backbone. A grafting‐from strategy was employed for the synthesis of a graft copolymer with narrow molecular weight distribution. Hydrophobic polystyrene side chains were connected to the backbones through stable C? C bonds. The poly(methoxymethyl acrylate) backbones can be easily hydrolyzed with HCl without affecting the hydrophobic polystyrene side chains. This kind of amphiphilic graft copolymer can form stable sphere micelles in water. The sizes of the micelles were dependent on the ionic strength and pH value. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3687–3697, 2007     

Synthesis, surface and aggregation properties of a series of amphiphilic dendritic copolymers

With 3.0 G polyamidoamine (PAMAM) as initiator and poly (propylene oxide) (PPO)–poly (ethylene oxide) (PEO) blocks as branches, a new class of amphiphilic copolymers were synthesized. The critical micelle concentration (CMC) and γ_CMC (surface tension at CMC) values were determined by surface tension measurement, and the result showed that they both decrease with the increase of amphiphilic branch length. The turbidity properties were investigated and it was found that the cloud point (CP) temperature decreases as the PEO block length increases. Freeze-fracture transmission electron microscopy (FF-TEM) results exhibited spherical shape of aggregates with the most probable distribution size of around 100 nm, which agrees with the results of the dynamic light scattering (DLS). Moreover, the relationship between PPO block length and the activity and CP properties was discussed.     

Oligomer-to-polymer transition in short ethylene glycol chains connected to mobile hydrophobic anchors.

We studied the structure of short ethylene glycol (EG) chains with N repeating units (EGN, N = 3, 6, 9, 12, and 15) connected to hydrophobic dihexadecyl chains by means of a combination of differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering (SAXS/WAXS). These synthetic amphiphiles dispersed in water form planar lamellar stacks and hexagonal cylinders confining the EG chains to restricted geometries. Owing to the self-assembly of the anchoring points, the lateral density of EG chains in planar lamella can be quantitatively controlled. Furthermore, the chain-melting phase transition of the anchors enables us to "switch" the intermolecular distance reversibly. SAXS/WAXS results suggest that the shorter EG chains (N = 3, 6, and 9) assume a helical conformation in stacks of planar lamella. When the EG chains are further elongated (N = 12 and 15), the lamellar periodicities cannot be explained by a linear extrapolation of shorter oligomers, but can be interpreted well as polymer brushes following the scaling theorem. Such rich phase behaviors of EGN molecules can be used as a simple model of oligo/poly-saccharide chains on cell surfaces, which act not only as flexible repellers between neighboring cells but also as stable spacers for functional ligands.     

Up-converted emission in a series of phenylazomethine dendrimers with a porphyrin core

The nonlinear optical and time-resolved properties of a series of phenylazomethine-porphyrin dendrimers are reported. The linear optical properties were also investigated, and the efficiency of the energy transfer process was obtained. Measurements were also carried out with the basic building-block molecules. The process of frequency up-converted emission was observed in these porphyrin dendrimers. The mechanism for this effect is investigated and related to the process of "hot-band" absorption in the phenylazomethine-porphyrin system. Time-resolved measurements also suggested efficient intramolecular vibrational energy redistribution in these systems. These properties suggest that the porphyrin dendrimers may also have applications in light harvesting of low-frequency photons, as well as in sensors.     

Nanometric sponges made of water-soluble hydrophobic dendrimers

The behavior of a fifth generation phosphorus dendrimer having a hydrophobic interior and hydrophilic end groups is studied in solution in water using the pulsed-field gradient spin-echo NMR technique. Addition of THF to this solution induces dramatic changes concerning the size of the dendrimer (+150% in volume), T1 relaxation of THF, and viscosity. This dendrimer behaves like a highly singular nanotool, able both to modify its environment and to be modified by it.     

Comparison of facially amphiphilic biaryl dendrimers with classical amphiphilic ones using protein surface recognition as the tool

Facially amphiphilic biaryl dendrimers are compared with the more classical benzyl ether amphiphilic dendrimers for molecular recognition, using protein binding as the probe. The protein used for the proposed study is chymotrypsin (ChT). A generation-dependent binding affinity was observed with the benzyl ether dendrimers, while the affinities were independent of generation in the case of the biaryl dendrimers. Similarly, although the ligands incorporated in both dendrons are the same, the biaryl dendrimers are able to bind more proteins compared to the benzyl ether dendrimers. For example, G3-dendron of biaryl dendrimer can bind six molecules of chymotrypsin, whereas G3-analogue of benzyl ether dendrimers can bind only three molecules of chymotrypsin. This result is consistent with our hypothesis that the internal layers of the facially amphiphilic biaryl dendrons are solvent-exposed and accessible for recognition. In addition, the systematic size differences in dendrons were also used to gain insights into the substrate selectivity that the enzyme gains upon binding to a ligand scaffold.     

Surface and bulk properties of two anionic amphiphilic penicillins in a selective solvent

The surface physicochemical properties of two anionic penicillins-cloxacillin and dicloxacillin-in mixed ethanol-water solvent were investigated by surface tension and dynamic light scattering (DLS). The data were analyzed according to the treatment of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to study the stability of the systems. The aim of the study is to obtain information about the effects of ethanol on the surface activity, bulk properties, and aggregate stability of these amphiphilic drugs, keeping in mind that both penicillins have the same counterion, and the difference in their structures is only a Cl atom in the phenyl ring that makes dicloxacillin more hydrophobic. The surface tension data show a minimum area per molecule increment with ethanol concentration that is related to the variation of the dielectric constant with the alcohol. Dicloxacillin has lower values of the standard Gibbs energies of adsorption than does cloxacillin, which gives this drug a more marked escaping tendency from the aqueous environment to the air-water monolayer. DLS data was fitted to an exponential function for cloxacillin at any drug or alcohol concentration in the range of concentrations studied that indicates that the system can be modeled as an ergodic system of dilute diffusing monodisperse particles. Dicloxacillin DLS data at an ethanol concentration of 5% (v/v) had to be fitted at a sum of an exponential and a stretched exponential function, which indicates that, besides the drug aggregates, a small population of penicillin clusters with longer relaxation times is present. The stability curves predicted by the DLVO theory, for both penicillins, indicate the predominance of electrostatic repulsion, leading to a stable system over the drug-ethanol concentration range studied, but the height of the reduced pair interaction potential energy barrier decreases with ethanol concentration, thus it is expected to undergo a transition from a stable dispersion to a coagulated one.     

Self‐assembly of a new class of amphiphilic poly(amidoamine) dendrimers and their electrochemical properties

Amphiphilic poly(amidoamine) (PAMAM) dendrimers consisting of a hydrophilic dendrimer core and hydrophobic aromatic dansyl or 1‐(naphthalenyl)‐2‐phenyldiazene (NPD) shells have been synthesized. These amphiphilic dendrimers from the zero generation to the third generation self‐assemble into vesicular aggregates in water. The self‐assembly behavior of these dendrimers strongly depends on their generations. The generation dependence has been further investigated by an exploration of their electrochemical properties. For the PAMAM–NPD aggregates, the photoisomerization process leads to a change in the aggregate size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5512–5519, 2005     

Polymeric vesicles with a hydrophobic interior formed by a thiophene-based all-conjugated amphiphilic diblock copolymer

The diblock copolymer, BP26, assembled into polymeric vesicles with double layers that formed a hydrophobic crystalline interior and a hydrophilic amorphous exterior in methanol, a selective solvent for the PEGT block. The vesicles were demonstrated to encapsulate a hydrophobic guest polyfluorene (PF).     

Self-assembly and hydrophobic clusters of amphiphilic polysaccharides

The objective of this work was to synthesize and characterize new polymeric surfactants deriving from natural polymers and designed for membrane protein solubilization. For this purpose, a set of hydrophobically-modified pullulans (HMCMPs) of moderate molar mass and differing in hydrophobic modification ratio, charge ratio and the nature of the hydrophobic chains introduced, were prepared. Their behaviour in aqueous dilute solutions was investigated by surface tension measurement and with a polarity probe, the Coomassie Brilliant Blue dye. Two distinct critical concentrations were evidenced, demonstrating the complex behaviour of HMCMPs. Amphiphilic pullulan derivatives may indeed establish hydrophobic associations in bulk solution while adsorbing at the air  water interface. The structural parameters of the polymers influence their aqueous behaviour. Self-assembly of HMCMPs occurs at smaller concentrations when the hydrophobic modification ratio or the alkyl hydrophobic chain length increases. It seems to be governed by the concentration of hydrophobic grafts, rather than by polymer concentration. Probably because of steric hindrance, 3-phenylpropyl grafts do not favour self-assembly, and lead to HMCMPs that preferentially adsorb at the air  water interface.