Cyclopentanone thiosemicarbazone, a new complexing agent for copper determination in biological samples by adsorptive stripping voltammetry.

A selective and sensitive stripping voltammetric method for the determination of trace amounts of copper(II) with cyclopentanone thiosemicarbazone (CPTSC) is presented. The method is based on the adsorptive accumulation of the resulting copper-CPTSC complex on a hanging mercury drop electrode, followed by the stripping voltammetric measurements at the reduction current of the adsorbed complex at -0.37 V vs. Ag/AgCl. The optimal conditions for the stripping analysis of copper include pH 9.3, deposition time of 120 s, and a deposition potential of -0.1 V (vs. Ag/AgCl). The peak current is linearly proportional to the copper concentration over a range 3.14 x 10(-9) M to 1.57 x 10(-6) M with a limit of detection of 1.57 x 10(-9) M. The technique has been applied to the determination of copper in biological samples, like urine and whole blood.     

Adsorptive stripping voltammetric determination of copper(II) ion using phenyl pyridyl ketoneoxime (PPKO)

A sensitive and selective procedure is presented for the voltammetric determination of copper(II) ion. The procedure involves an adsorptive accumulation of Cu2+-PPKO on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of reduction current of adsorbed complex at about -0.30 V (vs. SCE). The optimum conditions for the analysis of copper(II) ion include pH (5.8-7.0), 60 microgM PPKO and an accumulation potential of -0.5 V (vs. SCE). The peak current is proportional to the concentration of copper over the range 0.3-76 ng mL(-1) with a detection limit of 0.01ng mL(-1) with an accumulation time of 60 s. The speciation of different forms of complex between copper(II) ion and PPKO, using the Best (Martell program), followed pH measurement were examined. The method was applied to the determination of copper(II) ion content in real samples successfully.     

Determination of Trace Amounts of Copper by Adsorptive Stripping Voltammetry

ABSTRACT

A technique is presented for the determination of trace amounts of copper(II) by adsorptive cathodic stripping voltammetry. The procedure is based on adsorptive accumulation of copper(II)-Alizarin Red S (ARS) complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the reduction current of the adsorbed complex at -0.16 V (vs. Ag/AgCl). The height of the copper -ARS reduction peak is linearly dependent upon the copper(II) concentration between 0.2-15 and 15-500 ng.ml^?1. The detection limit of the technique is 0.05 ng.ml^?1 copper(II) for a collection time of 1 minute. The method is free from most interferences. The procedure has been successfully applied to the determination of trace amounts of copper(II) in some analytical grade salts.     

Determination of trace amounts of thallium by adsorptive cathodic stripping voltammetry with xylenol orange.

Trace amounts of thallium(I) can be determined using adsorptive cathodic stripping voltammetry in the presence of Xylenol Orange (XO). The reduction current of the thallium(I)-XO complex ion was measured by square-wave cathodic stripping voltammetry. The peak potential was at -0.44 V vs. Ag/AgCl. The effect of various parameters (pH, ligand concentration, accumulation potential and collection time) on the response are discussed. The response was linearly related to the thallium concentration in the range 0.5-110 ng ml(-1) and 110-2000 ng ml(-1). The limit of detection was 0.2 ng ml(-1). The relative standard deviation for the determination of 80 ng ml(-1) thallium was 2.8%. Many common anions and cations did not interfere with the determination of thallium. The interference of lead was reduced by the addition of 0.003 M sodium carbonate. The voltammetric procedure was then successfully applied to the determination of thallium in various complex samples.     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Determination of cobalt by catalytic-adsorptive differential pulse voltammetry in the presence of 2-aminocyclopentene-1-dithiocarboxylic acid and nitrite

A novel method for the determination of cobalt(II) by stripping voltammetry is described. It involves an adsorptive accumulation of the cobalt(II)-2-aminocyclopentene-1-dithiocarboxylic acid complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of the complex at –1.4 V at pH = 9 (vs. Ag/AgCl). The effects of various experimental parameters on the catalytic current were investigated. An accumulation time of 60 s results in a low experimental limit of detection of 0.1 ng/mL of Co(II), and 0.50 to 40.0 ng/mL of cobalt can be determined. The relative standard deviation at 0.50 ng/mL is 2.8%. Possible interferences from co-existing ions were also investigated. Received: 17 August 1998 / Revised: 16 November 1998 / Accepted: 20 November 1998     

Determination of Copper by Adsorptive Stripping Voltammetry in the Presence of Calcein Blue

An electrochemical adsorptive stripping approach is presented for the trace measurement of copper in some real samples. The method is based on the reduction of Cu²⁺ at pH 5.5 calcein blue (CB) containing solution at ?250 mV (vs. Ag/AgCl), adsorption of Cu? CB complex on hanging mercury drop electrode (HMDE) and the voltammetric determination by further reduction to Cu⁺ at HMDE. Experimental optimum conditions were determined in the fundamental studies. At the experimental optimum conditions the adsorbed complex of Cu²⁺ and calcein blue gives a well defined cathodic stripping peak current at ?0.135 V, which has been used for the determination of copper in the concentration range of 0.02 to 15 ng/mL with accumulation time of 90 s. The relative standard deviation (RSD) for the determination of 0.5 and 6.0 ng mL^?1 were 2.60 and 1.94% respectively. (n=10). The method has been applied to the analysis of copper in analytical reagent grade salts and tap water, mineral water and drug samples with satisfactory results.     

Determination of Copper by an Adsorption Differential Pulse Stripping Method with Naphthol Derivative

ABSTRACT

A simple, sensitive and selective method is proposed for the determination of copper(II) by adsorption-differential pulse stripping method. This method is based on the selective accumulation of the complexes of Cu(II) with l-(2-pyridylazo)-2-Naphthol and then reduction of the complex on a HMDE. The reduction current of the complex is about 0.0V vs. Ag/AgCl reference electrode at p8543146=4.0. The influences of various experimental parameters on the current peak were completely studied. The calibration graph was linear up to 50.0 ng/ml for a deposition time of 60 sec. The relative standard deviation was 2.3% (n=5) for Cu(II) concentration of 10.0 ng/ml, with a limit of detection of 0.2 ng/ml. The influence of potentially interfering ions was completely studied. The method has been applied for the determination of Cu(II) in water samples.     

Catalytic-adsorptive stripping voltammetry of cobalt in the presence of 2,2'-bipyridine and nitrite

A highly sensitive and selective procedure is presented for the voltammetric determination of cobalt. The procedure involves an adsorptive accumulation of cobalt-2,2'-bipyridine complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of nitrite at - 1.25 V (vs. Ag/AgCl). The optimum conditions for the analysis of cobalt include 0.1 M ammonium buffer (pH 8.55-9.25), 2.0-5.0 muM 2,2'-bipyridine, 0.20 M sodium nitrite and an accumulation potential between -0.75 and - 0.90 V (vs. Ag/AgCl). An accumulation time of 30 s results in a very low detection limit of 9.5 pM (0.56 p.p.t.) and a linear current-concentration relationship up to 2.0 nM. The relative standard deviation at 0.10 nM is 4.9%. Possible interferences from co-existing ions are also investigated.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Differential pulse cathodic stripping adsorption voltammetric determination of trace amounts of lead using factorial design for optimization

A sensitive cathodic stripping voltammetric method is developed for determination of lead(II), with adsorptive collection of complexes with Pyrogallol red (PGR) on to a hanging mercury drop electrode. After accumulation of the complex at −0.80 V vs. Ag/AgCl reference electrode, the potential is scanned in a negative direction from −0.20 to −0.50 V with differential pulse method. Then the reduction peak current for the lead(II)-PGR complex is measured at −0.39 V. The influence of reagent and instrumental variables was completely studied by factorial design analysis. The optimum analytical conditions for the determination of lead(II) were established. Under optimum conditions, lead(II) determined in the range of 0.1-30.0 ng ml⁻¹ with a limit of detection of 0.06 ng ml⁻¹. The method is successfully applied to determination of lead(II) in water sample.     

茜素修饰碳糊电极吸附伏安法测定痕量铜

报道了采用茜素修饰碳糊电极测定痕量铜的阳极溶出伏安法。在浓度为0 .1 mol/L 的 HAc- Na Ac缓冲溶液 (p H4.5)中 ,于 +0 .1 0 V处富集 ,- 0 .30 V还原后再进行阳极化扫描 ,于 - 0 .0 5V处获得一灵敏的铜的溶出峰 ,二次导数峰电流与铜浓度在 1 .6× 1 0 -9mol/L～ 4.7× 1 0 -7mol/L范围内呈线性关系 ,检出限达 8.0× 1 0 -10 mol/L。同时 ,对电极反应机理进行了讨论。方法应用于锌合金中铜的测定。     

The polarographic and voltammetric behaviour of the copper(II) mitoxantrone complex and its analytical application

The polarographic and voltammetric behaviour of the copper(II)-mitoxantrone complex have been studied. A well-defined linear sweep voltammetric peak was obtained at -0.275 V (vs. Ag AgCl ) or -0.325 V (vs. SCE) in ammonia-ammonium chloride (20 mmoll(-1), pH 9.0). The characteristics of the peak have been examined in detail. The experimental results show that the reduction of the copper(II) mitoxantrone complex is irreversible and the peak displays adsorption characteristics at the dropping mercury electrode. A mechanism is proposed for the reduction of the complex, comprising one-electron reduction of the copper(II) of the complex, is reduced directly in the complex form. A single-sweep oscillopolarographic method was develped for the determination of copper(II). The peak current is proportional to the concentration over the range 5 x 10(-8)-2 x 10(-5) mol l(-1). The method reported here has the advantage that the interference of many common metal ions is small.     

Simultaneous determination of copper, bismuth and lead by adsorptive stripping voltammetry in the presence of thymolphthalexone.

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of copper, bismuth and lead is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of copper, lead and bismuth were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 4.0 microM, pH of 9.0, and accumulation potential at -800 mV vs. Ag/AgCl with an accumulation time of 80 s. The peak currents are proportional to the concentration of copper, bismuth and lead over the 0.4-300, 1-200 and 1-100 ng mL(-1) ranges with detection limits of 0.4, 0.8 and 0.7 ng mL(-1), respectively. The procedure was applied to the simultaneous determination of copper, bismuth and lead in the tap water and some synthetic samples with satisfactory results.     

Simultaneous voltammetric determination of molybdenum and copper by adsorption cathodic differential pulse stripping method using a principal component artificial neural network

An adsorption differential pulse stripping method for the simultaneous determination of molybdenum and copper based on the formation of their complexes with cupferron (benzene, N-hydroxy-N-nitroso) is proposed. The optimum experimental conditions were obtained 0.010 mM cupferron, pH 3.0, accumulation potential of -0.15 V versus Ag/AgCl, accumulation time of 60 s, scan rate of 10 mV s(-1) and pulse height of 50 mV. Molybdenum and copper peak currents were observed at -0.16 and +0.02 V, respectively. A principal component artificial neural network (PC-ANN) was utilized for the analysis of the voltammogram data. A three layer back-propagation network was used with sigmoidal transfer function for the hidden and the output layers. The linear dynamic ranges were 5.0-60.0 and 0.1-20.0 ng ml(-1) for Cu(II) and Mo(VI), respectively. The detection limit was 0.06 ng ml(-1) for Mo(VI) and 0.20 ng ml(-1) for Cu(II). The capability of the method for the analysis of real samples was evaluated by the determination of molybdenum and copper in river water, tap water, and alloy.     

Adsorptive stripping voltammetric assay of phenazopyridine hydrochloride in biological fluids and pharmaceutical preparations

A sensitive method for the measurement of phenazopyridine hydrochloride (PAP) by differential pulse polarography (DPP) based on adsorptive stripping technique, using a hanging mercury drop electrode (HMDE) is described. The voltammetric peak is obtained at -0.760 V, which corresponds to the reduction of the azo group in Britton-Robinson buffer. The redox behaviour is reversible. Optimum conditions were found to be: accumulation potential -50 mV (vs. Ag/AgCl), accumulation time 60 s, scan rate 5 mV s(-1), pulse amplitude -100 mV and supporting electrolyte Britton-Robinson buffer (0.04 M, pH=11). The relative standard deviation (at 20 ng ml(-1) level) was +/-0.6% for six measurements. The calculated detection limit was 0.0299 ng ml(-1) with a 60-s accumulation time. The applicability of such a method was evaluated through the assay of PAP in human plasma and urine samples after a simple extraction procedure and in pharmaceutical preparation. The mean recovery was 97+/-2 (100 ng ml(-1) plasma).     

Quantification of terbutaline in pharmaceutical formulation and human serum by adsorptive stripping voltammetry at a glassy carbon electrode

The electrochemical oxidative behavior of terbutaline at the glassy carbon electrode was studied in a series of the Britton-Robinson buffer of pH 2--11. Cyclic and square-wave voltammograms of terbutaline at the pH values 相似文献   

Adsorptive stripping voltammetric behaviour of copper complexes of some heterocyclic azo compounds

Controlled adsorptive accumulation of copper complexed with TAN, TAC, TAR and TAM (heterocyclic azo-compounds) on a static mercury drop electrode provides the basis for the direct stripping measurement of this element in the nanomolar concentration level. The ligand TAN exhibited great sensitivity and better separation of the peak current of the ligand in relation to the complex. The reduction current of adsorbed complex ions of copper is measured by linear scan cathodic stripping voltammetry, preceded by a period of accumulation of a few minutes. The peak potential is at approximately -0.37 V vs. Ag/AgCl. Optimal experimental parameters were found to be a TAN concentration of 1 x 10(-5)M, an accumulation potential of -0.22 V, and a solution pH of 3.7 (acetate buffer). The detection limit is 0.8nM after a 5-min accumulation with a stirred solution, and the response is linear up to 50 mug/l. Many common cations and anions do not interfere in the determination of copper. The interference of titanium is eliminated by addition of fluoride ion. Results are reported for a fresh water sample.     

Differential pulse adsorption stripping voltammetric determination of copper(II) with 2-mercaptobenzimidazol at a hanging mercury-drop electrode.

Copper(II) was selectively accumulated on a hanging mercury-drop electrode by using 2-mercaptobenzimidazole. Ensuing measurements were carried out by differential pulse adsorption stripping voltammetry. Factors affecting the accumulation, reduction, and stripping steps were investigated and a procedure was developed. The optimum conditions for the analysis of copper were pH 5.0, 5.33 x 10(-5) M 2-mercaptobenzimidazole and an accumulation potential of -0.10 V (vs. Av/AgCl). A linear range was obtained in the concentration range 0.2-100 ng/ml with a 90 s accumulation time and a scan rate of 16 mV/s. For ten successive determinations of 1.0, 20.0 and 70.0 ng/ml copper(II), relative standard deviations of 4.2, 3.5 and 2.8%, respectively, were obtained. The developed method was applied to the determination of copper in commercial salts and aluminium alloys.     

Ultra trace analysis of molybdenum by differential pulse polarography and adsorptive stripping voltammetry in the presence of 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone

Summary Different polarographic and voltammetric techniques for the determination of molybdenum at the trace level have been investigated. As a result, a new high-sensitivity procedure for the determination of molybdenum by adsorptive stripping voltammetry was developed. The method is based on the reaction of molybdenum(VI) with 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone (chloranilic acid) to produce a complex which is absorbed onto mercury at –0.20 V (vs. Ag/AgCl, 3 mol/l KCl) from pH 2.7 solution. The cathodic stripping peak at –0.62 V can be used to determine molybdenum with a detection limit of 0.02 ng/ml after 5 min deposition time. The relative standard deviation for the determination of 0.1 ng/ml Mo after 5 min stirred collection was 6.6%. Interference from various inorganic ions and organic substances are reported. The method was applied to the determination of molybdenum traces in waters; interfering organic substances in polluted waters were destroyed by oxidative digestion in a microwave oven.