Adsorption and preconcentration of 2,4-dichlorophenoxyacetic acid on a chemically modified silica gel surface

The herbicide 2,4-dichlorophenoxyacetic acid (2,4-D), chemically anchored to a silica gel surface, was used to adsorb and preconcentrate the same herbicide from aqueous solutions at room temperature. From a series of adsorption isotherms adjusted to a modified Langmuir equation, the maximum number of moles adsorbed was calculated as 4.67 x 10(-5) mol g(-1), with the highest retention capacity at pH 5. This modified silica gel was used in a column for preconcentrating trace levels of 2,4-D. The preconcentrated herbicide can be directly eluted with methanol with a recovery efficiency higher than 97%. The concentration factor was 8.33.     

Surface properties of silica gel samples modified by selected proteins

The adsorption of a polar (water) and a non-polar (n-octane) liquid on silica gels, modified by adsorption of proteins, has been studied by thermal analysis. Silica gels with physically adsorbed BSA and ovalbumin layers were used. Thermodesorption energies were determined from Q-TG and Q-DTG curves recorded under quasi-equilibrium conditions. Significant differences in liquid desorption were observed from the surfaces due to heterogeneous changes (energetic and geometrical) as a result of modification. These results are compared with those obtained for the samples heated at 160°C for 1 h.     

Adsorption from binary solvent mixtures onto silica gel by HPLC frontal analysis

Summary The chromatographic technique of frontal analysis is applied to measuring adsorption from binary liquid mixtures by silica gel. The complete adsorption isotherm of a solvent mixture is obtained by measuring the break-through curves for a series of small concentration steps of the mobile phase. This method offers a direct way to determine the composition of the stationary phase in liquid-solid chromatography with mixed mobile phases. The surface excess isotherms of all binary systems formed by benzene, cyclohexane, and 1,2-dichloroethane, at the solution-silica gel interface at 25 °C are presented. The data of the three systems are shown to be thermodynamically mutually consistent.     

Adsorption thermodynamic and desorption studies of U(VI) on modified silica gel (SiAPMS-HL)

In this study, the adsorption process was examined by various isotherm models Langmuir, Freundlich and Dubinin–Radushkevich and equilibrium data were successfully described by Langmuir model. Adsorption thermodynamics of uranium (VI) on modified silica gel (SiAPMS-HL) has been studied within a temperature range from 293 to 333 K and the thermodynamic parameters, such as equilibrium constant (K _D), standard free energy changes (ΔG°), standard enthalpy change (ΔH°) and standard entropy change (ΔS°), have been obtained. The desorption studies were conducted in batch system to investigate the kind, concentration and volume of the eluent.     

Adsorption of cesium using mesoporous silica gel evenly doped by Prussian blue nanoparticles

In this paper, a novel mesoporous silica gel evenly doped by Prussian blue nanoparticles (PBMSG) was successfully synthesized by using N,N-dimethylamide as template with a large Barrett-Emmett-Teller (BET) surface area of 505 m²/g and an average pore size of 2.9 nm. The static adsorption experiments showed that the equilibration time of PBMSG for Cs⁺ was about 30 min. The adsorption isotherm of PBMSG for Cs⁺ accorded with Langmuir model and the theoretical maximum adsorption capacity was 80.0 ± 2.9 mg/g. When the initial concentration of Cs⁺ was 1.00 mg/L, the adsorption partition coefficient K_d could reach 3.5 × 10⁴ mL/g After adsorption, Cs⁺ could be eluted by dilute hydrochloric acid (pH 2) with an efficiency of 89.8%, while no K⁺, Fe³⁺, Fe²⁺ was eluted. PBMSG exhibited good selectivity toward Cs⁺ and Rb⁺. In the presence of high concentration of K⁺, the selective adsorption of PBMSG could change the mass ratio of K⁺, Rb⁺ and Cs⁺ from 96.63:0.83:1.00–1.12:0.73:1.00. The separation of Cs⁺ and Rb⁺ from K⁺ with similar concentration (100 mg/g) was realized by column experiment. This indicated that PBMSG was suitable for rapid recovery of low concentration of rubidium and cesium from complex matrixes, such as wastewater and salt lake brine, etc.     

The bifunctionality of silica gel modified with Congo red

Silica gel was chemically modified with Congo red and characterized by Fourier transform infrared spectroscopy, elemental and thermogravimetric analysis. The pH-sensitive immobilized Congo red retains the same properties as its solution counterpart and could be applied as solid indicator. The functionalized silica gel was also employed to extract different cations from water solutions. The concentration of cations extracted was determined by inductively coupled plasma optical emission spectrometry. The solid support is able to selectively extract silver and copper from water solutions and retains its properties after treatment with different organic and inorganic solvents.      

Adsorption of organic liquids on alkaline earth-metal modified silica

Summary Adsorption properties of alkaline earth-metal modified silica beads were investigated by the gas-solid chromatography (GSC) method. Silica beads, obtained from colloidal material, were characterized by their surface areas, crystallinity and amount of sorbed alkaline earth cations. Retentions of several aliphatic, alicyclic, chlorinated, and aromatic compounds were measured in the temperature range from 373 to 453 K.The gas/solid partition coefficients, K₅, and the related thermodynamic functions at zero surface coverage were determined. The results show that the specific surface areas of modified silica samples remain practically constant, whereas the modification leads to a decrease of silica surface heterogeneity.     

Regularities of the retention of aminopyridines by silica gel modified with gold nanoparticles

New sorbents based on silica gel and gold nanoparticles stabilized by L-cysteine and its methyl ester are synthesized. Regularities of the retention of various substituted aminopyridines by the synthesized sorbents are examined in the normal-phase mode of high-performance liquid chromatography upon elution by a binary mobile phase (hexane-isopropanol). Quantum-chemical simulations of L-cysteine and its derivative adsorptions on the surface of a gold cluster are performed, along with simulations of subsequent adsorptions of substituted pyridines on the modified gold surface. It is shown that the Snyder-Soczewinski and Scott-Kucera displacement models can be used to describe the experimental data on the synthesized sorbents.     

硅胶自环己烷中吸附环己酮和苯甲酸

用经不同温度处理的亲水硅胶(表面总羟基浓度不同)和甲基化硅胶(只含有缔合羟基或不同表面浓度的自由羟基的硅胶)为吸附剂, 测定了自环己烷中吸附环己酮和苯甲酸的等温线, 以及几种硅胶样品的红外光谱图, 探讨了表面自由羟基和缔合羟基在溶液吸附中的作用.     

Adsorption of cetyltrimethylammonium bromide at the silica gel/water interface

The adsorption isotherms of cetyltrimethylammonium ion (CTA+) together with that of the Br counterion on silica gel, and the effects of pH and added salts (NaF, NaCl and NaBr) have been systematically determined at 25°C. Electrophoretic mobilities of the silica gel particles have also been measured in the same conditions. The adsorption isotherm of CTA⁺ consists of four regions. Region I, at low concentrations of surfactant, the adsorption results primarily from electrostatic force between CTA⁺ and the negatively charged silica surface. Region II (first plateau), at medium concentrations, the adsorption is due to both the electrostatic force and the specific attraction (vdW forces) between CTA⁺ and the surface. Region III, characterized by an abrupt increase in the slope of the isotherm when the concentration reaches a particular point known as hemimicelle concentration (HMC). The abrupt increase in the adsorption is due to the hydrophobic interaction between hydrocarbon chains. Region IV (second plateau), at or above CMC, the limiting adsorption is reached as the micelle is not adsorbed. Based on this model, the experimental results can be explained reasonably. The results show that the HMC is about half of the CMC. According to the assumption that each adsorbed CTA⁺ ion in the first plateau is an active center for surface aggregation, the average aggregation number of hemimicelle have been calculated.     

Adsorption of hydrogen sulfide on silicotungstic acid supported on silica gel

The interaction of H₂S with both massive and supported on SiO₂ silicotungstic acid at 300°C produces additional sites of H₂S adsorption.     

Adsorption of codeine on hydrophilic silica and silica surface modified by hydrophobic groups in the presence of electrolytes

The adsorption of codeine from aqueous solution onto colloidal silica and silica surface-modified with chemiadsorbed octadecyl dimethyl silane (ODDMS) or dimethyl silane (DMS) groups was studied in the presence of neutral electrolytes at different pH values. From codeine-hydrochloride solutions codeine cations are strongly bound to negatively charged silica surfaces. Inorganic salts (NaCl, NaNO₃) reduce the adsorption of the organic cation. On silica modified by ODDMS (10% of surface silanol groups are occupied), codeine cations are adsorbed to a higher extent at pH 6, while at pH 8 the adsorbed amounts are lower than on the bare silica surface. Neutral electrolytes reduce codeine adsorption on the ODDMS modified silica. On the hydrophobic silica, completely covered by DMS groups, codeine adsorption is considerably lower than on the bare silica, but neutral salts increase the adsorption. The adsorption of codeine is compared with the adsorption of aggregating surfactant ions. Common and different features of their interactions with silica surfaces are outlined.     

Adsorption of phenol and benzyl alcohol onto surfactant modified silica

The adsorption of the surfactant, dodecyltrimethylammonium bromide, DTAB, and the co-adsorption of the additives phenol and benzyl alcohol, onto silica from aqueous solutions are investigated. The adsorption of DTAB is found to increase with increasing alcohol concentration in solutions where the DTAB concentration is below the cmc. Moreover, the corresponding adsorption of DTAB decreases when the DTAB concentration is above the cmc. The co-adsorption of the alcohol is found to increase with increasing alcohol concentration, and benzyl alcohol co-adsorbs more strongly than phenol. The surfactant modified silica shows a very high ability to incorporate phenol and benzyl alcohol. The results are discussed in relation to solubilization site and surfactant aggregate shape.     

Adsorption of metal halides from ethanol solutions by a 3-n-propylpyridiniumsilsesquioxane chloride-coated silica gel surface

3-n-propylpyridiniumsilsesquioxane chloride polymer, abbreviated as SiPy+Cl-, was used to coat a porous silica gel, SiO2, surface to form the chemically modified solid SiO2/SiPy+Cl-. The resulting polymer film was well adhered to the surface and presented an ion exchange capacity of 0.74 mmol g(-1). Metal halides, MClz [M=Fe(III), Cu(II), and Zn(II)], were adsorbed by the modified solid from ethanol solutions as neutral species by forming the surface anionic complexes described by the equation: mSiO2/SiPy+Cl-+ MClz <=> (SiO2/SiPy+)m[MCl(z+m)]m-, where the [MCl(z+m)]m- species adsorbed on the surface are FeCl4-, ZnCl4(2-), and CuCl4(2-). Accurate estimates of the specific sorption capacities and the heterogeneous stability constants of the immobilized metal complexes were determined with the aid of computational procedures.