An ultrasensitive chemiluminescence immunosensor for PSA based on the enzyme encapsulated liposome

A highly sensitive chemiluminescence immunosensor for the detection of prostate-specific antigen (PSA) was developed based on a novel amplification procedure with the application of enzyme encapsulated liposome. Horseradish peroxidase (HRP) encapsulated and antibody-modified liposome acts as the carrier of a large number of markers and specific recognition label for the amplified detection of PSA. In the detection of PSA, the analyte was first bound to the specific capture antibody immobilized on the microwell plates, and then sandwiched by the antibody-modified liposomes encapsulating HRP. The encapsulated markers, HRP molecules were released by the lysis of the specifically bound liposomes in the microwell with Triton X-100 solution. Then, the analyte PSA could be determined via the chemiluminescence signal of HRP-catalyzed luminol/peroxide/enhancer system. The “sandwich-type” immunoassay provides the amplification route for the PSA detection in ultratrace levels. The CL emission intensity exhibits dynamic correlation to PSA concentration in the range from 0.74 pg/ml to 0.74 μg/ml with readily achievable detection limit of 0.7 pg/ml.     

基于多壁碳纳米管-硫堇/Nafion纳米复合物修饰的人IgG免疫传感器的研究

制备了基于多壁碳纳米管-硫堇/Nafion纳米复合物的人IgG免疫传感器.阻抗谱、循环伏安研究表明,该免疫传感器对人IgG的检测具有优异的性能,其对人免疫球蛋白G(IgG)浓度的定量测定线性范围为1.0 ～ 200μg/L,检出限为0.25 μg/L,线性相关系数R=0.9950.该免疫传感器可用于对人血清中IgG的检...     

An immunosensor for syphilis

An immuno responsive membrane was prepared by immobilizing Wasserman antigen to acetylcellulose. The antigen-binding membrane was used in developing an immunosensor for determining specifically corresponding antibody in serum. The senor is characterized by electrochemical determination of the antigen-antibody complex formed at the membranesoluti on interface. Experimental data on the applicability of the sensor to serology tests for syphilis are given as well as an outline of a possible mechanism for evaluating the electrical potential difference across the antigen-binding membrane.     

An enzyme immunosensor for the electrochemical determination of the tumor antigen α-fetoprotein

A specific sensor for a tumor antigen, α-fetoprotein (AFP) can be prepared from a membrane with immobilized antibody and an oxygen probe with a permeable teflon membrane. Anti-AFP antibody is covalently immobilized on a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. The sensor is applied to enzyme immunoassay based on competitive antigen-antibody reaction with catalase-labelled antigen. After competitive binding of free and catalase-labelled AFP, the sensor is examined for catalase activity by amperometric measurement after addition of hydrogen peroxide. AFP can be determined in the range 10^-11–10^-8 g ml^-1.     

壳聚糖-纳米金复合膜修饰电化学发光免疫传感器检测人免疫球蛋白G

利用壳聚糖与纳米金良好的生物相容性及蛋白固定能力,制备了兼具导电性和透光性的人免疫球蛋白G(IgG)修饰膜,用于修饰玻碳电极,研制了新型电化学发光免疫传感器,并通过扫描电镜(SEM)及交流阻抗技术(EIS)考查了传感器表面性质.基于竞争免疫分析模式,以Ru(bpy)32+标记的羊抗人IgG为发光示踪物,采用新型共反应剂二丁基乙醇胺(DBAE)对光信号进行放大,建立了人IgG的检测方法,线性范围20ngmL-1～1.0μgmL-1,检测限6.5ngmL-1.将该电化学发光传感器应用于人血中IgG的检测,结果令人满意.     

Chemiluminescent optical fiber immunosensor for the detection of anti-West Nile virus IgG

An ELISA-based optical fiber methodology developed for the detection of anti-West Nile virus IgG antibodies in serum was compared to standard colorimetric and chemiluminescent ELISA based on microtiter plates. Colorimetric ELISA was the least sensitive, especially at high titer dilutions. The fiber-optic immunosensor based on the same ELISA immunological rationale was the most sensitive technique.     

An electrochemical immunosensor using ferrocenyl-tethered dendrimer

We report here an enzyme-amplified, sandwich-type immunosensor for detecting the biospecific interaction between an antibody and antigen using redox mediation. We employed biotin/anti-biotin IgG as a model immunosensing pair. Partially ferrocenyl-tethered dendrimer (Fc-D), whose ferrocene moiety acts as a redox mediator, was immobilized to the electrode surface by covalent binding between the dendrimer amines and the carboxylic acids of a self-assembled monolayer. The unreacted amines of the immobilized Fc-D were modified with biotin groups to allow the specific binding of goat anti-biotin IgG. Rabbit anti-goat IgG-conjugated alkaline phosphatase was bound to goat anti-biotin IgG to catalyze conversion of p-aminophenyl phosphate monohydrate to p-aminophenol. This product is oxidized to quinoimide by the reduction of ferrocenium back to ferrocene, producing an electrocatalytic anodic current. Cyclic voltammograms and surface plasmon resonance experiments showed that the binding of nonspecific proteins is not significant on the biotinylated Fc-D surface. We also examined the change in peak current according to the concentration of anti-biotin IgG and found that the detection range of this immunosensing scheme is between 0.1 and 30 microg mL(-1).     

An ultrasensitive immunosensor array for determination of staphylococcal enterotoxin B

Staphylococcal enterotoxin B (SEB) is a potent gastrointestinal toxin and is heat resistant. SEB is also a potential bioterrorism agent. The ability to measure accurately very low amounts of staphylococcal enterotoxin B in food and other samples is very important. A highly sensitive and stable sandwich fluorescence immunoassay based on a pair of monoclonal antibodies against SEB which were produced by us was developed. Classical sandwich immunoassay was adopted and the glass slides were used as the base of the immunologic reaction. The functionalized fluorescent core-shell silica nanoparticles were used as labels. The fluorescence issued from the labels was detected by a laser-induced fluorescence millimeter sensor array detection platform. The fluorescence intensity has a linear relationship with the amount of SEB in the range of 50 pg/mL-5 ng/mL, and the detection limit of SEB was 20 pg/mL (the absolute detection limit was 0.02 pg). The relative standard deviation (RSD) for 5 parallel measurements of SEB (1 ng/mL) was 9.2%.     

Development of an immunosensor for the determination of rabbit IgG using streptavidin modified screen-printed carbon electrodes

Voltammetric enzyme immunosensors based on the employment of streptavidin modified screen-printed carbon electrodes (SPCEs) for the detection of rabbit IgG, as a model analyte, were described. Alkaline phosphatase (AP) and 3-indoxyl phosphate (3-IP) were used as the enzymatic label and substrate, respectively. The adsorption of streptavidin was performed by deposition of a drop of a streptavidin solution overnight at 4 °C on the pre-oxidized surface of the SPCEs. The analytical characteristics of these sensors were evaluated using biotin conjugated to AP.The immunosensor devices were based on a specific reaction of rabbit IgG with its biotinylated antibodies, which were immobilised on the modified screen-printed carbon electrodes through the streptavidin:biotin reaction. The immunosensors were used for a direct determination of AP labelled rabbit IgG, and for free rabbit IgG detection using a sequential competitive immunoassay. A calibration curve in the range of 5 × 10⁻¹¹ to 1 × 10⁻⁹ M of rabbit IgG was obtained with a estimated detection limit of 5 × 10⁻¹¹ M (7.0 ng/ml). These immunosensors were stable for 5 months if they were stored at 4 °C.     

Sensitive amplification immunoassay for human IgG and anti-human IgG by using an enzyme cascade system

A sensitive heterogeneous immunoassay for human IgG and anti-human IgG was developed using an enzyme cascade system in limulus amoebocyte as a signal amplification system. Lipopolysaccharide (LPS) was conjugated to human IgG and anti-human IgG was adsorbed on polystyrene beads. The LPS-labelled human IgG mixed with unlabelled human IgG was allowed to react in a competitive manner with the immobilized anti-IgG on the polystyrene bead surface. After B/F separation, the LPS activity in the supernatant (free) and LPS activity on the bead (bound) were measured by using the chromogenic limulus test. IgG could be measured in the range 10^?7-10^?11 g ml^?1. LPS-labelled anti-IgG and IgG absorbed on polystyrene beads were prepared, and LPS-labeled anti-IgG mixed with unlabelled anti-IgG was allowed to react again in a competitive manner with solid-phase IgG. The LPS activity specifically bound to the bead was then measured. Anti-IgG could be measured in the range 10^?7-10^?11 g ml^?1.     

An optical tweezers-based immunosensor for detection of femtomoles-per-liter concentrations of antigens

We used optical tweezers—optical trapping with focused laser beams—to pull microspheres coated with antigens off of an antibody-coated surface. Using this technique, we could quantify the force required to separate antigen to antibody bonds. At very low surface density of antigen, we were able to detect the single antigen to antibody binding. The force required to break the antigen-antibody bonds and pull the microsphere off the surface was shown to increase monotonically with increasing surface density of antigens. Using the force determination as a transducer, we were able to detect concentrations of free antigens in solution as small as 10⁻¹⁵ mol/L in a competitive binding assay.     

Fluorescence-based assay with enzyme amplification on a micro-flow immunosensor chip for monitoring coplanar polychlorinated biphenyls

Detection of pollutants is of significant importance for environmental protection. However, conventional monitoring methods are often time-consuming, and require expensive equipments. Biosensors based on enzyme linked immunosorbent assay (ELISA) provide an alternative method to conventional ones. In this research, the reduction in the size of ELISA utilizing micro-chemical reaction is described in a micro-flow immunosensor chip. The immunosensor chips were fabricated by micro-electromechanical system (MEMS) technology. The quantitative determination of coplanar polychlorinated biphenyls (Co-PCBs) was performed by using a micro-flow immunosensor chip. Polystyrene beads were used as the solid substrate for the immobilization of Co-PCB antibody. The antibody-immobilized beads were introduced into the flow channel. As a competitive ELISA, sample solution mixed with horseradish peroxidase (HRP) conjugated antigen, and non-HRP conjugated antigen was allowed to react in the flow channel. After the antigen-antibody reaction, addition of phosphate buffer solution containing hydrogen peroxide and the fluorogenic substrate produced a fluorescent dye, which was monitored with the resulting change in the fluorescence intensity. By using our micro-flow immunosensor chip, it was possible to determine the sensing range of Co-PCB derivatives up to 0.1 ppt in 30 s. This immunosensor chip had a wide linear range for Co-PCB detection from 0.1 pg/ml to 1.0 μg/ml. The regression analysis provided the correlation coefficients of r = 0.982−0.964 with good reproducibility and precision. In a series of five measurements with immunosensor chips prepared with a new batch of antibody-immobilized polystyrene beads, a relative standard deviation of 21.3% was obtained. Our immunosensor chip design reported here has the potential to be implemented to several different detection methodologies for numerous analytes.     

An impedimetric immunosensor for the detection of autoantibodies directed against gliadins

An immunosensor has been developed for the detection of autoantibodies directed against wheat gliadin, a protein fraction of cereal gluten which is involved in celiac disease. The immunosensor is based on the immobilization of gliadins onto gold electrodes covered with a polyelectrolyte layer of poly(4-styrenesulfonic acid sodium salt). The immobilization was monitored by quartz crystal microbalance (QCM) analysis. The antigen-antibody interaction signal was amplified by an incubation step with peroxidase-labeled immunoglobulins and subsequent peroxidase-catalyzed oxidation of 3-amino-9-ethylcarbazole (AEC). Changes in the insulating properties of the electrode layer were measured by electrochemical impedance spectroscopy (EIS) in the presence of ferri/ferro-cyanide. Impedance spectra could be fitted to a Randles equivalent circuit with high accuracy. Exposing the sensor electrodes to various antigliadin antibody concentrations resulted in proportional changes in the charge transfer resistance. A calibration graph for the detection of antigliadin antibodies was established for antibody concentrations between 10(-8) and 10(-6) M. Finally, the sensor was used for the determination of antigliadin autoantibodies of the IgG and IgA type in several human sera.     

An impedance immunosensor for the detection of the phytohormone abscisic acid

The phytohormone abscisic acid (ABA) is the major player in mediating the adaptation of plants to stress. Previously developed phytohormonal biosensors usually employed indirect detection of the products of conjugated oxidase reactions. A label-free electrochemical impedance immunosensor for ABA detection was developed using an anti-ABA antibody adsorbed directly on a porous nanogold film. The film was produced electrochemically on a glassy carbon electrode in 0.008 mol/L hydrogen tetrachloroaurate solution containing 0.004 mol/L lead acetate with an applied potential of −0.5 V (versus Ag/AgCl) for 50 s. The anti-ABA antibody was immobilized onto the porous nanogold through electrostatic adsorption and covalent conjugation. Electrochemical impedance spectroscopy was used to characterize the successful construction of the porous nanogold film and the stepwise modification of the glassy carbon electrode. The concentration increase of the antigen brought about a decrease of the interfacial electron transfer, which also meant an increase of the impedance signal. The experimental parameters pH, antibody incubation time, and antibody concentration were optimized. The results showed significant linearity R = 0.9942, with the content of ABA in the range 0.5–5,000 ng/mL with a detection limit at about 0.1 ng/mL.     

An optical immunosensor based on surface plasmon resonance for determination of bFGF

An optical immunosensor based on surface plasmon resonance (SPR) has been developed for immunosensing. The sensor is designed on the basis of fixing incident angle of light and measuring the reflected intensities in the wavelength range of 400-800 nm simultaneously. The SPR spectrum was shown in terms of reflected light intensities versus wavelengths of incident light. The intensity of the reflected light reaches the minimum at the resonant wavelength. Molecular self-assembling in solution is used to form the sensing membrane on gold substrate. The kinetic processes of sensing monolayer formation were studied. The basic fibroblast growth factor, a kind of basic polypeptide, was determined in the concentration range of 0.24-9.6 μg/ml. Under optimum experimental conditions, the sensor has a good repeatability, reversibility and selectivity.     

An amperometric immunosensor with a thiolated Protein G scaffold

The orientation of the analyte-specific capture antibody on the surface of electrochemical immunosensors plays an important role on their overall performance. We have employed a self-assembled layer of Protein G that was thiolated with succinimidyl-6-[3′-(2-pyridyldithio)-propionamido] hexanoate for the orientation-controlled immobilisation of a capture antibody in a flow-type amperometric immunosensor based on a two-site sandwich immunoassay. After establishing the formation of the thiolated Protein G layer on 1-mm screen printed electrodes, amperometric immunosensors for the detection of the hormone, human chorionic gonadotrophin (hCG), were successfully constructed upon this scaffold. These sensors were characterised by a limit of detection (based on three times the standard deviation of the blank signal) of 175 IU l⁻¹ and a linear response up to approximately 5000 IU l⁻¹ of hCG.     

Chemiluminescence multichannel immunosensor for biodetection

An improved portable detector for biological compounds, the chemiluminescence multichannel immunosensor (CL-MADAG), has been developed and characterised. The device is based on a capillary ELISA technique in combination with a miniaturised fluidics system and uses chemiluminescence as the detection principle. The fluidics system construction allows three chemiluminescence immunoassays to be performed simultaneously within three fused silica capillaries (FSC). The CL-MADAG was characterised in a series of experiments with staphylococcal enterotoxin B (SEB) as a model toxin, the bacterial phage virus M13 as a virus simulant, and a pathogenic strain of Escherichia coli as simulant for bacteria. It was shown that the CL-MADAG can assay liquid samples for these substances within 24 min. The detection limits were 5 ng/ml for SEB, 10⁵ cfu/ml for E. coli O157:H7 and 10⁷ pfu/ml for M13.     

An electrochemical immunosensor based on agarose hydrogel films for rapid determination of ractopamine

A novel label-free electrochemical immunosensor for rapid determination of ractopamine was constructed by incorporating ractopamine–bovine thyroglobulin antigen in agarose hydrogel films modified on a glassy carbon electrode. Cyclic voltammetry and differential pulse voltammetry were employed to investigate the electrochemical character of the immunosensor during different modified stages using a redox probe system of K₃Fe(CN)₆/K₄Fe(CN)₆. In the presence of polyclonal antibody against ractopamine, K₃[Fe(CN)₆] electron transfer is inhibited, presumably due to that antibody in solution could adsorb on the electrode surface modified antigen. A competitive immunoreaction system was applied to determinate the free ractopamine in phosphate buffer solution. The selected polyclonal antibody showed very high sensitivity and specificity for ractopamine, and was used for the detection and quantitative determination of trace amounts of ractopamine in spiked animal feeds.     

An activated enzyme electrode for creatinine

A highly selective enzyme electrode for creatinine, based on tripolyphosphate-activated creatininase enzyme, is described and evaluated. Kinetic studies comparing purified creatininase enzyme in the activated and non-activated forms show that the activation mechanism involves an increase in V_max but no change in K_m. The analytical effect of enzyme activation is to extend the sensitivity of the electrode to lower limits and to improve the response slope of calibration curves. As a result, this activated creatininase enzyme electrode shows promise as a sensor for urine and serum samples.