Effect of Coulomb friction on the fiber/matrix debonding and matrix cracking in unidirectional fiber-reinforced brittle-matrix composites

A model for a macroscopic crack transverse to bridging fibers is developed based upon the Coulomb friction law, instead of the hypothesis of a constant frictional shear stress usually assumed in fiber/matrix debonding and matrix cracking analyses. The Lamé formulation, together with the Coulomb friction law, is adopted to determine the elastic states of fiber/matrix stress transfer through a frictionally constrained interface in the debonded region, and a modified shear lag model is used to evaluate the elastic responses in the bonded region. By treating the debonding process as a particular problem of crack propagation along the interface, the fracture mechanics approach is adopted to formulate a debonding criterion allowing one to determine the debonding length. By using the energy balance approach, the critical stress for propagating a semi-infinite fiber-bridged crack in a unidirectional fiber-reinforced composite is formulated in terms of friction coefficient and debonding toughness. The critical stress for matrix cracking and the corresponding stress distributions calculated by the present Coulomb friction model is compared with those predicted by the models of constant frictional shear stress. The effect of Poisson contraction caused by the stress re distribution between the fiber and matrix on the matrix cracking mechanics is shown and discussed in the present analysis. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 2, pp. 171–190, March–April, 2007.     

收缩临界5-连通图的平均度

M．Kriesell证明了收缩临界5-连通图的平均度不超过24并猜想收缩临界5-连通图的平均度小于10．本文构造了一个反例证明M．Kriesell的猜想不成立并给出了收缩临界5-连通图平均度新的上界．     

Fiber Buckling in a Viscoelastic Matrix

Within the framework of the three-dimensional linearized theory of stability, an approach for investigating fiber buckling in the structure of unidirectional fibrous viscoelastic composites is developed. For simplicity, a small fiber concentration is considered, and the buckling problem for a single elastic fiber in an infinite viscoelastic matrix is investigated. In this case, it is assumed that the fiber has an insignificant initial periodical imperfection, and the growth of this imperfection with time is studied. The state where this imperfection starts to grow indefinitely is taken as a fiber-buckling criterion, and the critical time is determined from this criterion.     

预测复合材料开裂方向的比应变能密度准则

本文提出预测复合材料中裂纹方向的比应变能密度准则,并将Tsai-Hill与Norris准则扩展来预测复合材料中的开裂方向.用这三个准则预测了具有各种不同纤维方向的单向纤维复合材料的裂纹扩展方向,预测结果与现有的比正应力准则和应变能密度准则进行了对比.     

Numerical Determination of Damping in Metal Matrix Composites

Damping in metal matrix composites is mainly caused by inelastic matrix deformation induced by the great difference in the mechanical properties of the single constituents of the materials. In this study, the finite-element method in combination with a highly accurate material model is employed to examine the effects of both the fiber volume fraction and the external loading amplitude on the energy dissipation process in an Al/SiC composite under a cyclic mechanical load.     

The Poisson boundary of lamplighter random walks on trees

Let be the homogeneous tree with degree q + 1 ≥ 3 and a finitely generated group whose Cayley graph is . The associated lamplighter group is the wreath product , where is a finite group. For a large class of random walks on this group, we prove almost sure convergence to a natural geometric boundary. If the probability law governing the random walk has finite first moment, then the probability space formed by this geometric boundary together with the limit distribution of the random walk is proved to be maximal, that is, the Poisson boundary. We also prove that the Dirichlet problem at infinity is solvable for continuous functions on the active part of the boundary, if the lamplighter “operates at bounded range”. Supported by ESF program RDSES and by Austrian Science Fund (FWF) P15577.     

The structures on the universal enveloping algebras of differential graded Poisson Hopf algebras

In this paper, the so-called differential graded (DG for short) Poisson Hopf algebra is introduced, which can be considered as a natural extension of Poisson Hopf algebras in the differential graded setting. The structures on the universal enveloping algebras of differential graded Poisson Hopf algebras are discussed.     

关于矩阵相似中变换矩阵的一般形式

本文利用 Jordan标准形理论 ,给出了矩阵相似中的变换矩阵的一般表达形式 .     

铜基复合材料组织形态分形特征的统计分析与研究

通过对铜基复合材料显微组织结构相图的分析和研究,根据分形理论,计算了不同实验条件下铜基复合材料横截面和平行压制力面的显微组织结构相图的分形维数,同时结合统计方法分析了铜基复合材料分形维数的一些统计特性,结果表明,分形维数反映了石墨在样品中的分布规律,分形维数越大,组织结构相图越复杂,石墨分布越不规则,故石墨分布的不规则性可用分形维数来刻画,分形维数可作为材料组织形态分析的一个表征参数,通过统计分析可知,铜基复合材料横截面和平行压制力面的组织结构相图的分形维数服从正态分布,且横截面和平行压制力面的分形维数随石墨含量变化的情况互不影响。     

图论中矩阵的可实现性

对图的关联矩阵,邻接矩阵,基本割集矩阵,基本圈矩阵的可实现性分别进行了论证,并将邻接矩阵的可实现性推广到一般形式.得到了同一个基本割集矩阵的奥凯达图形是不唯一的;以及这些奥凯达图形所对应的图是互相同构的结果;并且指出了基本圈矩阵的可实现性可以依靠基本割集矩阵的可实现性来解决.     

泊松比对静止平面应变裂纹尖端的理想塑性应力场的影响

在裂纹尖端的理想塑性应力分量都只是θ的函数的条件下,利用平衡方程和含有泊松比的Mises屈服条件,本文导出了静止平面应变裂纹尖端的理想塑性应力场的一般解析表达式.将这些一般解析表达式用于具体裂纹,我们就可以得到静止平面应变Ⅰ型、Ⅱ型及Ⅰ-Ⅱ复合型裂纹尖端的理想塑性应力场的解析表达式,这些表达式含有泊松比.     

一类重随机Poisson过程在信用风险定价模型中的应用

运用带随机尺度因子的重随机Poisson过程描述信用衍生产品的违约可能，在违约强度λ(t)是随机变量的情况下得到违约时间τ的分布密度函数，并推导出信用衍生产品的定价模型．     

Fracture Model for a Thin Layer of a Fibrous Composite

A model for a flat isolated layer of a unidirectional fibrous composite with a regular structure is constructed to investigate the possible variants of its failure development. An integrodifferential equation for determining the forces in fibers is obtained. Primary attention is focused on examining the failure process after the rupture of one fiber. This causes a drastic redistribution of stresses, which can lead to a failure of adjacent fibers owing to the increased load on them, to an interfacial shear fracture, and to the matrix cracking. It is shown that the development of layer failure is determined by the strength of fibers, the crack resistance of the matrix in axial tension and transverse shear, and also by the adhesion strength of the matrix-fiber interface. The sufficient conditions of applicability of the brittle fracture model are formulated.     

三角形弹性夹杂对裂纹的影响

研究了三角形弹性夹杂和裂纹之间的相互影响问题。应用Chau和Wang导出的面力边值问题的边界积分方程为基本方程,用夹杂和基体交界面上的面力和位移的连续性条件为补充方程,从而得到了一组能够解决夹杂和裂纹相互影响问题的方程,最后的方程组用一种新的边界单元法求解。计算了各种不同的夹杂和基体的材料常数以及夹杂和基体之间不同距离情况下裂纹尖端的应力强度因子。文中结果对研究新型复合材料有一定的应用价值。     

压电压磁复合材料中界面裂纹对弹性波的散射

利用Schmidt方法分析了压电压磁复合材料中可导通界面裂纹对反平面简谐波的散射问题．经过富里叶变换得到了以裂纹面上的间断位移为未知变量的对偶积分方程A·D2在求解对偶积分方程的过程中,裂纹面上的间断位移被展开成雅可比多项式的形式．数值模拟分析了裂纹长度、波速和入射波频率对应力强度因子、电位移强度因子、磁通量强度因子的影响A·D2从结果中可以看出,压电压磁复合材料中可导通界面裂纹的反平面问题的应力奇异性形式与一般弹性材料中的反平面问题应力奇异性形式相同．     

纯弯曲矩形截面梁Ⅰ型单边裂纹端部的应力应变场及裂纹失稳扩展临界应力的计算

本文应用文[1]的分析方法,研究了纯弯曲矩形载面梁Ⅰ型单边裂纹端部的应力应变场,给出了裂纹尖端的应力应变分量和计算裂纹端部弹性变形区和变形强化区宽度的公式以及计算裂纹失稳扩展临界应力的方程组。最后用计算实例对裂纹失稳扩展临界应力方程组进行了验证,最大误差不超过0.18%.     

杂交应力元的应力子空间和柔度矩阵H对角化方法

证明了：1）杂交元假设应力模式线性无关是柔度矩阵非奇异的充分必要条件;以及2）等价假设应力模式形成相同的杂交元,在此基础上建立了假设应力模式的希尔伯特应力子空间,从而可以持方法简单地得到等价的正交归一化应力模式,实现了柔度矩阵对角化,使得杂交元形成过程中完全避免了繁杂的矩阵求逆运算,极大地提高了杂交元分析的计算效率,数值算例表明该方法是确实有效的。     

两个矩阵秩等式的推广

给出文[1]建立的两个矩阵秩等式的统一推广.     

Interpolating solutions of the Poisson equation in the disk based on Radon projections

We consider an algebraic method for reconstruction of a function satisfying the Poisson equation with a polynomial right-hand side in the unit disk. The given data, besides the right-hand side, is assumed to be in the form of a finite number of values of Radon projections of the unknown function. We first homogenize the problem by finding a polynomial which satisfies the given Poisson equation. This leads to an interpolation problem for a harmonic function, which we solve in the space of harmonic polynomials using a previously established method. For the special case where the Radon projections are taken along chords that form a regular convex polygon, we extend the error estimates from the harmonic case to this Poisson problem. Finally we give some numerical examples.     

饱和多孔介质中骨架的应变局部化萌生条件

应用饱和多孔介质控制方程和Liapunov稳定理论,导出了固相应力和有效应力描述的多孔介质骨架应变局部化的萌生条件．不同应力形式表达的多孔介质基体的控制方程,相应的应变局部化萌生条件的表达形式也不尽相同,其原因源于骨架本构中固液两相之间相互作用的不同描述．应用得出的Terzaghi有效应力描述的应变局部化萌生条件,可以理论解释多孔介质中固、液两相不同相对运动出现的破坏方式,如管涌、滑坡和泥石流．应用简单算例说明了应变局部化条件的具体实施方法．