浊点萃取-火焰原子吸收光谱法测定痕量铜

2-磺酸基-4-甲氧基苯基重氮氨基偶氮苯(MOSDAA)和Cu(II)反应生成疏水性络合物后,被萃取到Triton X-114非离子表面活性剂胶束相中,火焰原子吸收光谱法测定其中的铜,建立了浊点萃取预富集-火焰原子吸收光谱法测定铜的方法。反应体系的pH、MOSDAA和Triton X-114的浓度、平衡温度及时间等实验条件被优化。在选择的实验条件下,方法的检出限为1.1 ng/mL(3σ),对浓度为0.1μg/mL的Cu(II)溶液平行测定6次,相对标准偏差为1.9%。方法已用于小米和水样中痕量铜的测定。     

微乳相萃取分离富集-原子吸收光谱法分析铬形态

建立了一种微乳相萃取分离-石英双缝管原子捕集火焰原子吸收光谱法(STAT-FAAS)分析环境水样中铬形态的新方法。该方法中,Cr(Ⅲ)与8-羟基喹啉反应形成的疏水性配合物,经萃取进入微乳相,Cr(Ⅵ)留在水溶液中,从而实现Cr(Ⅲ)与Cr(Ⅵ)的相互分离。Cr(Ⅵ)含量的测定通过过氧化氢溶液将Cr(Ⅵ)还原为Cr(Ⅲ),按同样方法分析。实验对微乳相萃取的主要影响因素进行了优化。结果表明,经优化后实验条件为:平衡温度80℃,平衡时间10min,溶液酸度pH=9.0,NH3-NH4Cl缓冲溶液用量2.0mL,8-HQ用量0.05mmol;TritonX-100微乳液组成:m(TritonX-100):m(正戊醇):m(正己烷):m(水)=3.0:15:1.5:4.0。在此条件下,萃取的富集倍数达到25倍(50mL起初样品溶液/2mL最终测定液),线性范围为2.5～500μg/L,检出限为0.62μg/L,相对标准偏差(RSD)为3.8%(n=10,c=10μg/L)。本方法已成功地应用于电镀废水中铬形态分析。     

浊点萃取-石墨炉原子吸收光谱法测定痕量钯

建立了浊点萃取-石墨炉原子吸收光谱法(GFAAS)测定痕量金属钯的新方法,利用表面活性剂Triton X-114和络合剂2-(5-溴-2-吡啶偶氮)-5-二甲氨基苯胺(5-Br-PADMA)对钯进行浊点萃取。研究了溶液pH、试剂浓度、平衡温度和加热时间等因素对浊点萃取及测定灵敏度的影响。优化条件为:pH 5.50 HAc-NaAc缓冲,0.08 mL 5×10-4 mol/L 5-Br-PADMA,0.70 mL10g/L Triton X-114。在最佳条件下,方法的线性范围为0.1～10 ng/mL,钯的检出限为0.068 ng/mL,富集倍率为45倍。该方法可用于环境样品中痕量钯的富集和测定,结果令人满意。     

浊点萃取-高效液相色谱法测定巢湖表层沉积物中铬的形态

以1-(2-噻唑偶氮)-2-萘酚(TAN)为络合试剂,非离子表面活性剂Triton X-114为萃取剂,浊点萃取同时富集Cr(Ⅲ)和Cr(Ⅵ),并于RP-C18柱上,用含4.5 mmol/L十六烷基三甲基溴化铵(CTMAB)和0.03mol/L HAc-NaAc缓冲溶液(pH5.5)的甲醇-水(体积比69∶31)溶液为流动相,对富集的Cr(Ⅲ)和Cr(Ⅵ)进行高效液相色谱快速分离、测定。对浊点萃取时溶液的pH值、TAN和Triton X-114的用量等影响因素进行了考察。在优化实验条件下,对100μg/L的Cr(Ⅲ)和Cr(Ⅵ)进行7次平行测定,保留时间的相对标准偏差分别为1.2%和0.9%,峰面积的相对标准偏差分别为4.7%和2.7%。Cr(Ⅲ)和Cr(Ⅵ)的线性范围均为50~5 000μg/L,检出限分别为7.5、3.5μg/L。大部分离子不干扰测定,该方法具有较高的灵敏度,可用于湖泊表层沉积物中铬形态的分析。     

浊点萃取-石墨炉原子吸收光谱法对不锈钢餐具溶出铬的形态分析

采用浊点萃取一石墨炉原子吸收光谱法分离和测定不锈钢餐具中的溶出铬.利用六价铬和吡咯烷二 硫代氨基甲酸铵(APDC)间发生选择性络合被萃取到表面活性剂相中,而三价态的铬离子留在水相中,探讨了影响浊点萃取的主要凶素:如pH值、APDC试剂的浓度、Triton X-114的浓度、反应温度和时间.在优化的实验条件下,检出限为0.012μg/L,富集倍数为20倍.     

微波消解-浊点萃取-火焰原子吸收光谱法测定空心胶囊中铬含量

研究了微波消解-浊点萃取-火焰原子吸收光谱法(FAAS)测定空心胶囊中痕量铬的方法。空心胶囊通过微波消解,以二乙基二硫代氨基甲酸钠(DDTC)为络合剂络合消解液中铬(Ⅵ),非离子表面活性剂Triton X-114为萃取剂,结合FAAS测定空心胶囊中痕量铬,与《中国药典》(2010版)检测方法具有较好一致性。考察了溶液的pH值、络合剂和表面活性剂浓度、平衡温度和时间等条件对浊点萃取效果的影响。在最优条件下,铬(Ⅵ)线性范围为0～10μg/mL,检出限(3σ)为7.6ng/mL,相对标准偏差为1.5%(n=10),回收率在95%～102%之间。方法灵敏度高,重复性好,适合于胶囊中铬的日常检测。     

浊点萃取-电热原子吸收光谱法分析铬的形态

提出了测定铬形态的新方法——浊点萃取-电热原子吸收光谱法(PPE-ETAAS)。该法基于利用非离子表面活性剂Triton X-100的浊点现象，当加热至其浊点时，溶液分为两相，Cr(Ⅲ）与8-羟基喹啉形成的疏水性螯合物进入富胶束相中，从而实现与Cr(Ⅵ）的分离。在本法中，8-羟基喹啉既作为化学分离，富集剂，又作为ETAAS测定中的化学改进剂。对影响浊点萃取分离的主要因素进行了详细的研究。在最优实验条件下，方法测定Cr(Ⅲ）的检出限为0．023μg/L；相对标准偏差为1．1％(C=2．0μg/L，n=6)。本法具有简便、灵敏、富集倍数高和避免使用有机溶剂的优点。     

浊点萃取-火焰原子吸收光谱法测定水样中痕量铜的研究

提出了浊点萃取火焰原子吸收光谱法测定痕量铜的新方法。详细探讨了溶液pH，试剂浓度等实验条件对浊点萃取及测定灵敏度的影响，在最佳下，富集50mL样品溶液，用火焰原子吸收光谱法测定，铜的检测限为0.35μg/L，铜的富集倍率为71倍。方法用于自来水、河水及海水中痕量铜的测定。     

浊点萃取-火焰原子吸收光谱法测定样品中的痕量钴

研究了基于表面活性剂Triton X-114和络合剂吡咯烷二硫代氨基甲酸铵（APDC）浊点萃取钴的样品前处理方法.优化了浊点萃取条件参数,包括pH值、Triton X-114用量、APDC浓度、平衡温度及时间等,建立了浊点萃取-火焰原子吸收光谱法测定痕量钴的方法.该法的检测限（3σ）为2.6μg/L,相对标准偏差RSD为6.2%（n=7,c=200μg/L）.该法成功地应用于海带、维生素B12注射液等样品中钴的测定.     

浊点萃取–火焰原子吸收光谱法分析水样中铬的存在形态

将浊点萃取与火焰原子吸收光谱法联用对水样中铬的形态进行检测,在pH 7.7条件下,络合剂1-(2-吡啶偶氮)-2-萘酚(PAN)只与Cr(Ⅲ)络合而不与Cr(Ⅵ)反应,实现了环境水样品中Cr(Ⅲ)与Cr(Ⅵ)的分别测定。对影响浊点萃取效率的主要因素如酸度、试剂量、反应温度、时间等进行了研究,在最佳条件下,铬富集倍数为20倍。Cr(Ⅲ)的质量浓度在0.005~1.0 mg/L内与吸光度线性良好,线性相关系数r=0.999 8。用该方法对0.30 mg/L的Cr(Ⅲ)标准溶液平行测定11次,测定结果的相对标准偏差为2.9%,检出限为5.74μg/L。将该法用于自来水、河水、三亚温泉水、工厂污水水中铬的形态分析并进行加标回收试验,回收率为90.0%~106.5%。该法富集倍数高、重现性好,测定结果准确可靠。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.