A colorimetric sensing ensemble for heparin

A receptor possessing ammoniums and a novel amino acid with a boronic acid side chain was designed and synthesized. The receptor shows good affinity and selectivity for heparin over similar polysaccharides possessing lower anionic charge density. The affinity for heparin is similar to that for a heparin disaccharide, indicating that disaccharidic units are the likely sites for binding to the receptor. The receptor has a potential use for creating a colorimetric assay for heparin.     

Recognition of phospho sugars and nucleotides with an array of boronic acid appended bipyridinium salts

The solution-phase sensor array of three cationic bis-boronic acid appended benzyl viologens (BBV) and the anionic fluorescent dye, 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS), is able to discriminate among five phospho sugars, four nucleotides and three neutral saccharides in aqueous buffered solution at low mM concentrations. Linear discriminant analysis, principal component analysis, and hierachical cluster analysis studies showed the “discrimination limit” (lowest analyte concentration where the discrimination is still 100%) to be 4 mM. Calculated K_b and F_max/F₀ values from binding curves of the three BBVs with 1-12 were also used to perform multi-variate analyses with very good discrimination results.     

A colorimetric pH indicators and boronic acids ensemble array for quantitative sugar analysis

The colorimetric response patterns of pH indicators and boronic acids ensemble array were used to analyze serial concentrations of mono-, disaccharides quantitatively. Furthermore, this ensemble array was successfully applied to quantify the sugar content in clinically used saline solutions.     

A boronic acid based intramolecular charge transfer probe for colorimetric detection of hydrogen peroxide

Many oxidative stress related diseases and adverse health conditions have been associated with the negative effects of hydrogen peroxide and other similar reactive oxygen species in human body. Therefore, increasing attention has been attracted to the detection and monitoring of hydrogen peroxide in living organisms and food items. In this work, a simple, inexpensive colorimetric method for the quantitative determination of hydrogen peroxide in aqueous sample is described. This method utilizes the de-protection of aryl boronic acid to yield a strongly colored water-soluble dye, which is capable of absorbing and emitting in the red region of the spectrum. The mechanism is faster in alkaline condition and utilizes the intramolecular charge transfer between strong phenolate donor and TCF acceptor, thus allowing a naked eye detection of hydrogen peroxide within seconds. The method is unaffected by the presence of various salts, metal ions, and other interfering species, and it can provide a limit of detection as low as ~1 ppm in aqueous samples. This unique way of generating a fluorogenic donor-acceptor pair holds a potential of this dye and other related derivatives for understanding the role of hydrogen peroxide in physiology and pathology.     

A gold nanoparticle-based colorimetric sensing ensemble for the colorimetric detection of cyanide ions in aqueous solution

A colorimetric sensing ensemble was prepared by mixing readily prepared adenosine triphosphate (ATP)-stabilized AuNPs with Cu²⁺-phenanthroline complexes. The sensing mechanism of the ensemble was examined by UV-vis spectrometry and transmission electron microscopy. The studies showed that the Cu²⁺-phenanthroline complex was converted to free phenanthroline when exposed to cyanide anions and the free phenanthroline caused the ATP-stabilized AuNPs to aggregate, which in turn, resulted in a visible color change in the AuNP solution. The ensemble could detect cyanide ions in aqueous solution at physiological pH, either spectrophotometrically or visually, with high selectivity toward cyanide anions over a range of mono- and di-anions commonly found in biological and environmental systems. This sensing ensemble also allows a quantitative assay of the analyte in a neutral aqueous solution, down to a concentration of 10⁻⁵ M.     

New fluorescent and colorimetric chemosensors based on the rhodamine and boronic acid groups for the detection of Hg

Novel rhodamine B (RB) derivatives bearing mono and bis-boronic acid groups were investigated as Hg²⁺ selective fluorescent and colorimetric sensors. These derivatives are first examples of reversible fluorescent chemosensors for Hg²⁺ which utilized boronic acid groups as binding sites. Two new RB-boronic acid derivatives displayed selective ‘Off-On’-type fluorescent enhancements and distinct color changes with Hg²⁺. Selective fluorescent enhancement of two rhodamine derivatives was attributed to ring opening from the spirolactam (nonfluorescent) to ring-opened amide (fluorescent).     

Fluorescent acrylamide nanoparticles for boronic acid based sugar sensing — from probes to sensors

Fluorescent nanoparticles containing covalently bound phenylboronic acids (~ 250 nm in diameter) are presented that respond to carbohydrates by swelling which is detected using fluorescence resonance energy transfer. The nanoparticles are characterized in terms of kinetics, response time and dynamic range. The response of the particles to glucose at pH 7.5 depends on the kind of phenylboronic acid and on ionic strength. The particles were immobilized in hydrogel sensor layers that enable continuous optical sensing of carbohydrates.     

A colorimetric sensor array for detection and identification of sugars

Molecular recognition of sugars and a practical method to detect and discriminate among a large number of such similar analytes remain substantial scientific challenges. We report here a low-cost, simple colorimetric sensor array capable of identification and quantification of sugars and related compounds. Fifteen different monosaccharides, disaccharides, and artificial sweeteners were differentiated without error in 80 trials. Limits of detection at pH 7.4 for glucose were <1 mM, which is below physiologically important levels.     

一种简单的化学传感体系对草酸根的比色识别

制备了一种基于2,7-萘二酚衍生物的双核锌配合物Zn2L,在水溶液中(HEPES 0．01 mol·dm-3,pH=7．4)Zn2L与指示剂邻苯二酚紫(PV)构筑成一种比色化学传感体系(CE)。该化学传感体系对草酸根具有良好的选择性识别作用,向CE溶液中加入草酸根引起溶液颜色由蓝色变为黄色。除丙二酸根对草酸根的识别具有轻微干扰外,其他二元酸离子包括邻苯二甲酸根,间苯二甲酸根,对苯二甲酸根,丁二酸根,戊二酸根,己二酸根对草酸根的识别无明显干扰。     

A specific colorimetric cysteine sensing probe based on dipyrromethane-TCNQ assembly

A new charge-transfer complex, consisting of dihydroxymethyl di-(2-pyrrolyl)methane and tetracyanoquinodimethane (TCNQ), has been designed to high selectively distinguish cysteine from other amino acids in water/organic solvent mixtures through the visual color change from blue to nearly colorless. The excellent system properties make the supramolecular assembly a highly selective colorimetric probe for monitoring cysteine.     

Lactose tailored boronic acid conjugated fluorescent gold nanoclusters for turn-on sensing of dopamine

Dopamine being a neurotransmitter and chemical messenger plays a vivacious role in a number of significant medical conditions like Parkinson’s disease, Attention Deficit Hyperactivity Disorder, Schizophrenia, and drug addiction. As turn-on sensors have a superior level of selectivity than fluorescence quenching based sensors, we developed a fluorescence retrieval strategy for dopamine sensing. Here, highly fluorescent amino phenyl boronic acid (APBA)?conjugated gold nanocluster (Au?BSA?APBA probe) has been synthesised from bovine serum albumin?protected gold nanocluster (Au?BSA NCs). Boronic acid forms boronate ester with disaccharides such as lactose due to its affinity to polyols. Hence fluorescence of Au?BSA?APBA probe is quenched when it binds with lactose molecules through boronate ester formation. The fluorescence of Au?BSA?APBA?lactose system can be retrieved (turn-on) with dopamine by the competitive displacement of lactose from the probe surface which suggests the higher affinity of boronic acid to the catechol group of dopamine. Furthermore, real samples spiked with dopamine including human serum and urine were analysed using this turn-on sensor and showed excellent recovery percentage. The developed fluorescent sensor offered high selectivity for dopamine over other catecholamines and aminoacids with detection limit as low as 0.7 μM.     

Amide-nitrophenyl based colorimetric receptors for selective sensing of fluoride ions

New chromogenic receptors containing 2-nitrophenyl or 3,5-dinitrophenyl groups appended to the amide or in secondary amine positions have been synthesized and characterized. Upon addition of fluoride to two of the receptors in acetonitrile, the solution acquired a yellow colour. The third receptor showed an intense purple colour with fluoride in acetonitrile and the appearance of the purple colour can be detected by the naked eye at parts per million level. The addition of chloride, bromide and iodide to the receptors did not induce any colour. Thus the receptors can act as fluoride ion sensors even in the presence of other halide ions.     

A highly fluorescent water-soluble boronic acid reporter for saccharide sensing that shows ratiometric UV changes and significant fluorescence changes

One water-soluble naphthalene-based fluorescent boronic acid, 6-(dimethylamino)-naphthalene-2-boronic acid (6-DMANBA, 1), has been synthesized. 6-DMANBA shows significant ratiometric UV absorbance changes upon addition of a sugar. For example, addition of 50 mM fructose shifted the UV absorption wavelengths of 6-DMANBA from 306 and 251 to 280 and 244 nm, respectively. In addition, 6-DMANBA is highly fluorescent with a quantum yield of 89% in the absence of a sugar and shows significant fluorescence intensity changes with the addition of a saccharide in aqueous phosphate buffer at physiological pH. For example, with the addition of 50 mM fructose, 6-DMANBA shows an 80% fluorescent intensity decrease at 432 nm. All these spectroscopic properties make compound 1 unique and useful.     

Reversible colorimetric probes for mercury sensing

The selectivity and sensitivity of two colorimetric sensors based on the ruthenium complexes N719 [bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) bis(tetrabutylammonium) bis(thiocyanate)] and N749 [(2,2':6',2' '-terpyridine-4,4',4' '-tricarboxylate)ruthenium(II) tris(tetrabutylammonium) tris(isothiocyanate)] are described. It was found that mercury ions coordinate reversibly to the sulfur atom of the dyes' NCS groups. This interaction induces a color change in the dyes at submicromolar concentrations of mercury. Furthermore, the color change of these dyes is selective for mercury(II) when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II). The detection limit for mercury(II) ions--using UV-vis spectroscopy--in homogeneous aqueous solutions is estimated to be approximately 20 ppb for N719 and approximately 150 ppb for N749. Moreover, the sensor molecules can be adsorbed onto high-surface-area mesoporous metal oxide films, allowing reversible heterogeneous sensing of mercury ions in aqueous solution. The results shown herein have important implications in the development of new reversible colorimetric sensors for the fast, easy, and selective detection and monitoring of mercuric ions in aqueous solutions.     

A simple colorimetric assay for muramic acid and lactic acid

The Barker and Summerson method of assaying lactic acid colorimetrically is modified to provide a simple and fast method of measuring lactic acid and other compounds such as muramic acid and glyceraldehyde that will release acetaldehyde on incubation in hot sulfuric acid. The assay can be done with open tubes and no more complicated equipment than a spectrophotometer. A further modification allows a relatively specific determination of formaldehyde.     

Water-soluble fluorescent boronic acid compounds for saccharide sensing: substituent effects on their fluorescence properties

Four new naphthalene-based boronic acid compounds (1-4) were synthesized. The effect of various carbohydrates on their fluorescence properties has been studied in aqueous phosphate buffer at pH 7.4. Different substitutions on the aniline group of the naphthalene ring resulted in significant differences in fluorescence properties for these four compounds. Compound 1 shows ratiometric fluorescence changes upon addition of a sugar. Compounds 2 and 3 do not show ratiometric fluorescence changes but show very large fluorescence intensity changes (about 70-fold fluorescence intensity increase). In addition to the quantifiable fluorescence property changes upon sugar addition, the fluorescence color changes of 1-3 are also visible to the naked eye. However, amidation of the aniline nitrogen atom significantly diminishes the fluorescence intensity of compound 4. The crystal structure of one boronic acid provided some insight into the structural features that are important for the fluorescence properties of these compounds.     

A colorimetric probe for ascorbic acid based on copper-gold nanoparticles in electrospun nylon

We report on a colorimetric probe based on copper-gold alloy nanoparticles (NPs). The probe is capable of selectively detecting ascorbic acid (AA) as a result of the distance-dependent colour change of the nanoparticles immobilized in an electrospun nylon-6 nanofiber. The resulting white nanofibres undergo a colour change to blue as a result of the aggregation of the NPs induced by AA in the pH range 2–7. The probe is selective for AA even in the presence of dopamine, uric acid, saccharides, amino acids and certain organic acids. It covers the 1.76 x10^?2 mg L^?1 to 1.76 x10⁵ mg L^?1 concentration range, and exhibits a limit of detection of 1.76 x10^?2 mg L^?1 based on visual detection. Its application was demonstrated by the determination of ascorbic acid in fruit juices, urine, serum, and vitamin C tablets.

A simple chip free‐flow electrophoresis for monosaccharide sensing via supermolecule interaction of boronic acid functionalized quencher and fluorescent dye

Here, a simple micro free‐flow electrophoresis (μFFE) was developed for fluorescence sensing of monosaccharide via supermolecule interaction of synthesized boronic acid functionalized benzyl viologen (ο‐BBV) and fluorescent dye. The μFFE contained two open electrode cavities and an ion‐exchange membrane was sandwiched between two polymethylmethacrylate plates. The experiments demonstrated the following merits of developed μFFE: (i) up to 90.5% of voltage efficiency due to high conductivity of ion‐exchange membrane; (ii) a strong ability against influence of bubble produced in two electrodes due to open design of electrode cavities; and (iii) reusable and washable separation chamber (45 mm × 17 mm × 100 μm, 77 μL) avoiding the discard of μFFE due to blockage of solute precipitation in chamber. Remarkably, the μFFE was first designed for the sensing of monosaccharide via the supermolecule interaction of synthesized ο‐BBV, fluorescent dye, and monosaccharide. Under the optimized conditions, the minimum concentration of monosaccharide that could be detected was 1 × 10^?11 M. Finally, the developed device was used for the detection of 0.3 mM glucose spiked in human urine. All of the results demonstrated the feasibility of monosaccharide detection via the μFFE.     

Use of the interaction of a boronic acid with a merocyanine to develop an anionic colorimetric assay

A displacement assay based on the interaction of Brooker’s merocyanine (BM), a merocyanine dye, with an excess of phenylboronic acid (BA) was studied in acetonitrile. BM is colored in solution, but its reaction with BA yields a colorless covalently linked BA-BM species. This strategy was studied in the presence of different anions (F⁻, Cl⁻, Br⁻, I⁻, , , CH₃COO⁻, and ), but only fluoride, a strongly nucleophilic anion, and to a much lesser extent acetate, reacted with BA-BM, displacing BM through a bimolecular nucleophilic substitution mechanism, and coloring the solution. Experimental data were collected and are shown here in order to gain a better understanding of this chromogenic sensor.