Sample preparation and analytical methods for polycyclic aromatic hydrocarbons in sediment

Polycyclic aromatic hydrocarbons (PAHs) are a large category of ubiquitous persistent environmental pollutants, some of them have strong carcinogenicity to human and animals. These pollutants can easily enter the river through multiple ways including rainfall, dry deposition and water washout, and deposit in the sediment. However, it is easy for them to re-enter the river water and pollute water sources, as well as aquatic animals and plants, bringing potential harm to human health. Therefore, it is requisite to accurately analyze the PAHs in sediment. In this review, the analytical methods of PAHs in sediment, focused on the methods of sample extraction, purification, concentration and determination, are summarized.     

Inter-laboratory comparison of methods used for analysing polycyclic aromatic hydrocarbons (PAHs) in soil samples

Summary In view of the investigation of contaminated model sites in Baden-Württemberg an inter-laboratory comparison was organized for the methods used for analysing polycyclic aromatic hydrocarbons (PAHs). The laboratories performing chemical and physical analyses at the model sites participated at the request of the Landesanstalt für Umweltschutz, Baden-Württemberg. This inter-laboratory comparison was meant as a first laboratory evaluation, and not as the search for the best method available. Furthermore, it was to show the difficulties in comparing results from different laboratories, which have analysed identical samples. The results of the inter-laboratory comparison between the nine laboratories showed a reproducibility coefficient of variation, for the total of the 16 PAHs according to the EPA, between 48.8 and 61.1% in the concentration range of 5 to 55 mg/kg in the soil samples. One of the laboratories reported significantly lower values compared with the true value. This was probably due to an ill-suited (sample) preparation method. Although the results of the inter-laboratory comparison are, in general, satisfactory, the reproducibility can be improved by standardizing the analytical method for the determination of PAHs in solid environmental samples.     

Gamma-radiolysis and ozonolysis of polycyclic aromatic hydrocarbons (PAHs) in solution

Summary The degradation of a mixture of 18 different polycyclic aromatic hydrocarbons (PAHs) has been studied in acetonitrile solution by usingg-radiation at radiation doses of 100, 200 and 300 kGy. The mixture of radiolyzed PAHs was analyzed by liquid chromatography (HPLC) using a diode array detector. Radiolysis at 100 kGy total dose is already sufficient to cause the complete disappearance of all PAHs with the exception of fluorene and crysene which still survive in small amounts. They are known to be among the most radiation-resistant PAHs and can be completely eliminated from the radiolyzed solution by a treatment with ozone. Alternatively higher radiation dose (200 kGy) is needed to eliminate fluorene and crysene completely from the acetonitrile solution. PAHs can be degraded completely with an excess of ozone but the distribution of products is of course different from that obtained by radiolysis and radiolysis followed by ozonolysis.     

Determination of polycyclic aromatic hydrocarbons (PAHs) and total fats in human milk

A sensitive and reliable analytical method was developed for the simultaneous extraction of PAHs and total fats and their determination in the human milk. The method involved a liquid-liquid extraction of PAHs and fats, followed by the gravimetric determination of the latter. PAHs were separated from lipids by size exclusion chromatography eluting with methylene chloride and analysed by gaschromatography coupled with mass spectrometry (GC/MS). The recovery of analytes was in the range of 42-101% and agreed well with their boiling temperatures (R2=0.779). Precision of the method was found between 7.6 and 19%. Quantification and detection limits for individual PAHs ranged from 0.011 to 0.032 and from 0.006 to 0.022 microg/Kg milk (wet weight), respectively. Quantification limit for the total fat determination was 0.26 g/Kg milk (wet weight). This procedure, applied to milk samples of ten healthy, non-smoking, Italian primiparae, living in rural or low-traffic zones, allowed for the identification and quantitative determination of naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo(a)anthracene, benzo(b)fluoranthene and benzo(k)fluoranthene in the mean concentration range 0.114-6.95 microg/Kg milk (wet weight). The most volatile compounds, which were not investigated elsewhere, were found at much higher concentrations than those observed for the others. No relation was found between PAH and total fat concentrations.     

土壤中多环芳烃修复技术的研究进展

近年来我国的土壤污染问题日益严重,严重危害着人类的生活环境与身体健康,其中主要的有机污染物之一为多环芳烃(PAHs)。PAHs作为一种持久性有机污染物在全球范围内广泛存在,其主要污染来源于人为因素。由于PAHs复杂的杂环芳环结构、较强的疏水性和较高的热稳定性等,使其在土壤中不易自然降解因而具有较高的持久性。本文综述PAHs的主要污染来源、暴露途径及其对人体的危害,并从物理、化学和生物三个方面简要介绍土壤中PAHs的修复方法,并分析每种方法的优势以及面临的挑战。新兴的修复技术结合三种修复技术的优点,具有更好的修复效果和应用前景,但仍存在着一些亟待解决的问题。期望本文能为土壤中PAHs的修复提供借鉴,并为今后的研究方向提供新的思路。     

Determination of monohydroxylated metabolites of polycyclic aromatic hydrocarbons (OH-PAHs) from wastewater-treatment plants

A high-performance liquid chromatography separation coupled with mass spectrometry via an electrospray interface is proposed for the determination of the hydroxylated derivatives of polycyclic aromatic hydrocarbons (OH-PAHs) in treated and untreated wastewaters and suspended solids from sewage treatment plants (STPs). The developed SPE procedure was applied to spiked wastewater samples, with recovery yields (1000?mL; 100?ng?L^?1 spiking level) in the 65–87% (RSD: 6–12%) range for the selected OH-PAHs. The limits of detections ranged between 0.3 and 3.2?ng?L^?1, depending on the selected compound and on the investigated matrix. The proposed method was applied to the determination of the selected analytes in real samples from a sewage-treatment plant (STP). The investigated OH-PAHs were detected mainly in the particulate fraction. The exhibited mean concentrations of positive samples (as the sum of dissolved and particulate matter) in the STP final effluent ranged from 15 to 68?ng?L^?1.     

Analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples: a critical review of gas chromatographic (GC) methods

Polycyclic aromatic hydrocarbons (PAHs) are frequently measured in the atmosphere for air quality assessment, in biological tissues for health-effects monitoring, in sediments and mollusks for environmental monitoring, and in foodstuffs for safety reasons. In contemporary analysis of these complex matrices, gas chromatography (GC), rather than liquid chromatography (LC), is often the preferred approach for separation, identification, and quantification of PAHs, largely because GC generally affords greater selectivity, resolution, and sensitivity than LC. This article reviews modern-day GC and state-of-the-art GC techniques used for the determination of PAHs in environmental samples. Standard test methods are discussed. GC separations of PAHs on a variety of capillary columns are examined, and the properties and uses of selected mass spectrometric (MS) techniques are presented. PAH literature on GC with MS techniques, including chemical ionization, ion-trap MS, time-of-flight MS (TOF-MS), and isotope-ratio mass spectrometry (IRMS), is reviewed. Enhancements to GC, for example large-volume injection, thermal desorption, fast GC, and coupling of GC to LC, are also discussed with regard to the determination of PAHs in an effort to demonstrate the vigor and robustness GC continues to achieve in the analytical sciences.     

8,9-Didehydrofluoranthenes as building blocks for the synthesis of extended polycyclic aromatic hydrocarbons (PAHs)

[reaction: see text] The synthesis of phenyl-substituted 8,9-dibromofluoranthene and p-dodecylphenyl-substituted 8,9-fluoranthene anthranilic acid is presented. Their synthetic potential as 8,9-didehydrofluoranthene precursors is demonstrated in combination with a new biscyclopentadienone by the synthesis of novel phenyl-substituted PAHs with up to 14 annulated rings. The crystal structure of 7,16-diphenylfluorantheno[8,9-k]fluoranthene is given.     

Identification of polycyclic aromatic hydrocarbons (PAHs) in soil by constant energy synchronous fluorescence detection

In this paper, a novel method of constant energy synchronous fluorescence (CESF) was proposed to the simultaneous determination of different polycyclic aromatic hydrocarbons (PAHs) in a mixture of 16 components. When different appropriate intervals of the constant energy (Deltanu=1400 or 4800cm(-1)) were chosen during constant energy synchronous scanning, 13 PAHs could be identified and quantified by the corresponding synchronous spectra. Results show that their linear relations are fine and the limits of detection (LODs) were between 0.2 and 7.6ngml(-1). Then the application of CESF method proposed in the analysis of the real soil samples under the optimum conditions indicated that 11 PAHs could be identified and the total concentration of PAHs in a real soil sample is 5.1microg g(-1), most of PAHs in the soil samples had three or four rings. Recoveries of these PAHs were from 70.9 to 121.4% in most cases. This CESF method is a simple, rapid, sensitive method with high resolution and also suitable to analyze the complex mixtures of PAHs in other environmental samples.     

Determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter collected with low volume samplers

The determination of polycyclic aromatic hydrocarbons (PAHs) contained in samples of particulate matter (PM), collected with low volume pumps, were carried out with an high sensitivity method that comes from several revisions of a previous method. The present work describes how, by using programmable temperature vaporization (PTV) and a mass selective detector with inert ionic source for the GC-MS analysis and the modifications of microwave-assisted extraction (MAE), the sensitivity of the method can be increased.The PAHs chosen for testing the method are: benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene (Ip) and dibenzo[a,h]anthracene (DbA). They, in fact, belong to that group of substances that are the most harmful for human health for their carcinogenicity.PAHs recoveries for spiked standard solutions at different concentrations were between 95 and 100% with relative standard deviation ranging from 1 to 3%. The revised method was validated using a 1649a urban dust standard reference material (SRM). The results obtained were in good agreement with certified values. The high sensitivity of the method allows to carry out analyses using only a half of the sampled filter (usually 47 mm diameter membranes). In this way, the other half can be used for the characterization of the other components of PM (heavy metals, organic carbon, ions, etc). The last step has been constituted by application of the optimized method on real samples collected in two cities located in Southern Italy (Bari and Taranto).     

Novel b-cyclodextrin modified quantum dots as fluorescent probes for polycyclic aromatic hydrocarbons (PAHs)

Water-soluble CdSe/ZnS quantum dots (QDs) were prepared via a simple sonochemical procedure using b-cyclodextrin (CD) as surface coating agent. The QDs displayed a sensitive emission enhancement for anthracene over other related polycyclic aromatic hydrocarbons, and the detection limit was around 1.6 10 8 mol/L.     

Residential wood combustion: A source of atmospheric polycyclic aromatic hydrocarbons

Samples were taken of the atmospheric particulate matter over Fairbanks Alaska in the winter of 1985, and from wood stoves burning the major wood types locally available. These samples were then analyzed for polycyclic aromatic hydrocarbon (PAH). A PAH emission profile was determined from the wood stove samples and applied to the atmospheric samples to determine the residential wood combustion contribution to the local atmospheric particulate burden. Emission profiles for coal burning and automobile emissions for PAH were also used to estimate their relative contributions.     

Effects of temperature on the concentration of polycyclic aromatic hydrocarbons (PAHs) adsorbed onto airborne particulates

Summary Daily samples of airborne particulates (143) were collected along the year in La Spezia (Italy). Seasonal variations of atmospheric PAH concentrations, with highest winter values, have been observed. The concentration of PAHs was found to correlate negatively with the mean ambient temperature during the sampling period. Volatilization, photodegradation and seasonal modifications of emissions from urban traffic were found to be a possible explanation of this phenomenon.     

Evaluation of surface sediment contamination by polycyclic aromatic hydrocarbons in colony Z3—(Patos Lagoon, Brazil)

This paper describes the extraction and analysis of Polyaromatic Hydrocarbons (PAHs) in five points of the Patos Lagoon Estuary. These points were in the area named “colony Z3”, which is a craft fishermen community in Pelotas City (southern Brazil). Samples were collected in July of 2007, and the concentrations of 16 USEPA priority polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography coupled to a mass spectrometry detector (GC/MS). The PAH concentrations ranged from 4.7 to 112.5 µg kg^− 1 dry weight. Sediment samples with the highest PAH concentrations appeared at point 2, which is a pier. The correlation between the total organic material (TOM) and the total PAH concentration suggests that TOM plays an important role in controlling the PAH levels in sediments. According to the observed ratios of individual PAHs, the contamination in the studied areas originated both from high-temperature pyrolytic processes and petrogenic sources. The levels of PAHs at the studied sites in the Z3 colony (Patos Lagoon) were low enough that they should not exert adverse biological effects.     

Determination of polycyclic aromatic hydrocarbons (PAHs) in a complex mixture by second-derivative constant-energy synchronous spectrofluorimetry

In this work, the combination of the excellent band narrowing features of derivative spectrometry with constant-energy synchronous fluorescence spectrometry for the simultaneous determination of different polycyclic aromatic hydrocarbons (PAHs) in a mixture of 18 is assessed. This mode of scanning allowed for the identification and quantification of 10 PAHs and the grouping of some of these.     

Lichens as biomonitors for the determination of polycyclic aromatic hydrocarbons (PAHs) in Caracas Valley,Venezuela

Biomonitoring of PAH air pollution using lichens was carried out. Sixteen PAHs were studied in 11 locations along the valley of Caracas (Venezuela). The results of this work indicate that 14 of the 16 analysed PAHs were highly accumulated into the lichen thalli of Pyxine coralligera Malme. PAH levels in the samples revealed that the several volatile PAHs (naphthalene, acenaphtylene, acenaphtene, and fluoranthene) have the highest levels in the majority of the studied locations. The fluoranthene/pyrene and phenantrene/antracene ratios suggested that the major sources of PAHs are anthropogenic, mainly associated with gasoline and diesel combustion (pyrolytic) and unburnt oil derivates (petrogenic). The total PAH concentrations obtained in the present study were in the range of 0.24 to 9.08?µg/g, similar to those reported by other works in European and Asian cities.     

Identification of polycyclic aromatic hydrocarbons (PAHs) in suspended particulate matter by synchronous fluorescence spectroscopic technique

The synchronous fluorescence (SF) technique has been used in the identification of polycyclic aromatic hydrocarbons (PAHs) from air particulate sample in an urban environment of Delhi, Jawaharlal Nehru University. Suspended particulate matter samples of 24h duration were collected on glass fiber filter papers. PAHs were extracted from the filter papers using dichloromethane (DCM)+hexane with ultrasonication method. Qualitative measurements of the polycyclic aromatic hydrocarbons (PAHs) were carried out using the SF technique at various wavelength intervals (Deltalambda). Due to the difference in chemical structure, each PAH gives specific characteristic spectrum for each Deltalambda. Following PAHs were detected in our measurement: benz(a)anthracene (BaA), pyrene (Pyr), chrysene (Chry), fluoranthene (Flan), phenanthrene (Phen), and benz(ghi)perylene (BghiP). This is in agreement with our earlier work for determination of these PAHs using gas chromatography (GC). The seasonal variation of the PAHs was found to be maximum in winter and minimum during the monsoon.