Free vibration of functionally graded sandwich plates using four-variable refined plate theory

This paper uses the four-variable refined plate theory (RPT) for the free vibration analysis of functionally graded material (FGM) sandwich rectangular plates.Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theory presented is variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM facesheet and the homogeneous core and the sandwich with the homogeneous facesheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. The validity of the theory is shown by comparing the present results with those of the classical, the first-order, and the other higher-ordex theories. The proposed theory is accurate and simple in solving the free vibration behavior of the FGM sandwich plates.     

基于逆复合二次径向基函数的对称复合材料层合板自由振动分析

利用逆复合二次径向基函数无网格配点法对Reddy的高阶剪切变形理论进行离散,预测了对称复合材料层合板的自由振动特性.将不同材料参数、几何尺寸和边界条件的层合板固有频率计算结果与相关文献中的结果进行对比,结果表明:逆复合二次径向基函数在对称复合材料层合板自由振动分析方面具有收敛性好及精度高等一系列优点.     

基于边光滑有限元法的加筋板静力和自由振动分析

运用边光滑有限元法,研究分析了加筋板结构的静力和自由振动问题。在边光滑有限元法中,将基于边的应变光滑技术用于对原来的应变场进行光滑操作;由于应变光滑技术能够适当地软化原来过刚的有限元模型,从而能够得到更加接近于系统准确刚度的光滑有限元模型;鉴于三角形单元良好的适用性,选用三角形单元对模型进行网格划分;同时,为了解决低阶Reissner-Mindlin板单元弯曲过程中的横向剪切自锁问题,采用了一种新型的离散剪切间隙技术。算例的数值计算结果表明,与传统的有限元法相比,边光滑有限元法能够得到精度更高的计算结果,且收敛更快,计算效率更佳。     

Mixed finite element and differential quadrature method for free and forced vibration and buckling analysis of rectangular plates

This paper presents a combined application of the finite element method (FEM) and the differential quadrature method (DQM) to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.     

Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations

The aim of this study is to investigate the dynamic response of axially moving two-layer laminated plates on the Winkler and Pasternak foundations. The upper and lower layers are formed from a bidirectional functionally graded(FG) layer and a graphene platelet(GPL) reinforced porous layer, respectively. Henceforth, the combined layers will be referred to as a two-dimensional(2D) FG/GPL plate. Two types of porosity and three graphene dispersion patterns, each of which is distributed through the p...     

Modeling vibration behavior of delaminated composite laminates using meshfree method in Hamilton system

Free vibration analysis of composite laminates with delaminations is performed based on a three-dimensional semi-analytical model established by introducing the local radial point interpolation method (LRPIM) into a Hamilton system. The governing equation is derived with a transfer matrix technique and a spring layer model based on a local weak-form equivalent to the modified Hellinger-Reissner variational principle. Main superiority of the present model is that the scale of the governing equation involves only the so-called state variables at the top and bottom surfaces, and is insensitive to the thickness and the layer number of the composite laminates. Several numerical examples for analyzing the vibration frequencies and mode shapes of delaminated composite beams and plates are given to validate the model. The results are in good agreement with the pre-existing results.