Synthesis and thermal properties of a novel lactose‐containing poly(N‐isopropylacrylamide‐co‐acrylamidolactamine) hydrogel

An improved, simple, and efficient method for the synthesis of lactose‐containing monomer acrylamidolactamine (LAM) has been reported. Free radical copolymerization of this monomer with N‐isopropylacrylamide (NIPAM) in the presence of the crosslinking reagent N,N′‐methylenebisacrylamide (BisA) (1.2 mol %) proceeded smoothly in an aqueous solution using potassium persulfate (KPS) and N,N,N′,N′‐tetramethylethylenediamine (TMEDA) as the initiating system and gave transparent hydrogels. Reactivity ratios were estimated from copolymerization reactions carried out in solution without BisA crosslinker and at low conversion, by using both linearization and nonlinearization methods. They were found to be r_LAM = 0.75 and r_NIPAM = 1.22. The swelling behavior of the hydrogels was studied by immersion of the hydrogels in deionized water at different temperatures. Equilibrium water uptake was increased when the LAM content was higher than 47 mol %, and reached ≈ 44‐fold with 100 mol % LAM at room temperature. Depending on the composition, the gels showed sharp swelling transitions with small changes in temperature. Differential scanning calorimetry (DSC) was used to characterize the swelling transition and the organization of water in the copolymer hydrogels. The amounts of freezable water in these hydrogels ranged from 81 to 89%, and was not correlated to the content of the sugar monomer. These gels have potential applications as biocompatible materials. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1393–1402, 1999     

Tough and self‐recoverable hydrogels crosslinked by triblock copolymer micelles and Fe3+ coordination

Tough hydrogels have great potentials in soft robotics, artificial muscles, tissue replacement, and so on. Here we introduce novel tough hydrogels crosslinked by triblock copolymer (F127DA) micelles and metal coordination. The gels showed outstanding tensile strength (∼1–11 MPa), toughness (∼4–32 MJ m⁻³), and excellent self‐recovery properties (∼56.8–87.2% toughness recovery in 9 min at room temperature). The mechanical and self‐recovery properties could be manipulated by varying contents of micelles and/or COO⁻ groups. Dynamic mechanical analysis of the hydrogels revealed apparent activation energy and relaxations for both physical interactions. In situ small‐angle X‐ray scattering measurements on hydrogels upon stretching revealed micelle deformations. XPS measurements on hydrogels before and after stretching revealed significant changes in the binding energy of Fe³⁺ ions in the gels, suggesting the rupture of coordination bonds. The experimental results strongly suggest a synergistic effect from the micelle‐crosslinking and Fe³⁺–COO⁻ coordination on the strength, toughness, and self‐recovery of the hydrogels. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 865–876     

Cyclodextrin-Cross-Linked Hydrogels for Adsorption and Photodegradation of Cationic Dyes in Aqueous Solution

Possessing three-dimensional porous structures and tunable mechanical strengths, cyclodextrin-containing polymeric hydrogels are one of the most promising water-based adsorbent materials due to their easy availability, simple chemical modification and environmental friendliness. In this work, two kinds of hydrogels were prepared via the copolymerization with acrylic acid and vinyl-derivatized β-cyclodextrins in water. These two gels have showed good adsorption performance towards cationic dyes through the noncovalent interactions with their anionic backbones and porous network. Meanwhile, pseudo-second-order model was selected to clarify the adsorption kinetics process. Moreover, nano-scaled TiO₂ was doped into these resultant cyclodextrins-based hydrogels to achieve efficient degradation of dyes upon light irradiation. The obtained TiO₂-loaded hydrogels could exhibit improved adsorption performance and make the adsorbed dyes photo-degraded with the decolorization rates above 95%. It can be envisioned that such cyclodextrin-based soft materials may find applications in dye clearance and water treatment.     

Fabrication of polyvinyl alcohol/chitosan oligosaccharide hydrogel: physicochemical characterizations and in vitro drug release study

Abstract

Hydrogel composites from polyvinyl alcohol and chitosan have been developed by various researchers as a function of their composition for various medical applications. Although, the solubility of chitosan in acidic solvents may limit its wide bioengineering applications. In this article, we demonstrate that polyvinyl alcohol-chitosan oligosaccharide (water soluble) to develop cross-linked hydrogel network using chemical cross linker. X ray diffraction, Fourier transform infrared spectroscopy, and wettability study of these hydrogels were also performed. Lomefloxacin drug was loaded into the hydrogels and its release profile was studied.     

Physical properties of glycosaminoglycan hydrogels

The chemical composition of glycosaminoglycan (GAG) hydrogels was found to have a profound effect on the physical properties of gels. Hyaluronan (HA) and chondroitin sulfate (CS) were each modified with adipic dihydrazide (ADH) with carbodiimide chemistry. The resulting polymer was crosslinked with various concentrations of poly(ethylene glycol) dialdehyde (PEG‐diald) to produce a series of hydrogels. The physical properties of these GAG hydrogels varied in a concentration‐dependent fashion. Maximal crosslinking was observed at a theoretical crosslinking of 50% for the HA‐ADH‐PEG‐diald hydrogels and 75% for the CS‐ADH‐PEG‐diald hydrogels. Adding PEG‐diald beyond the optimum for crosslinking prolonged the in vitro enzymatic degradation time of the hydrogels. The swelling of the crosslinked GAG hydrogels was correlated with the amount of PEG‐diald used rather than with the crosslinking density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4344–4356, 2004     

Gel forming waterborne dispersion polymerization of sodium p‐styrene sulfonate with glycidyl methacrylate

Water soluble monomer like sodium p‐styrene sulfonate (SSS) is copolymerized with hydrophobic and reactive monomer glycidyl methacrylate (GMA). The polymerization proceeds as dispersion and forms gels. The gel forming nature prevails even with other hydrophobic and hydrophilic monomers to form ternary polymeric systems. The swelling is dependent on polymer composition as well as the treatment history of polymers. SSS also induces ring opening of GMA to form 1,2‐diols as confirmed independently by various model reactions. The ability of hydrogels to absorb various dyes indicates that owing to the anionic nature, hydrogels absorb cationic dyes nearly quantitatively. Because of their strong affinity to cationic species these hydrogel forming polymers are potentially useful in water purification applications as well as purification of proteins. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 626–634     

In situ photocrosslinkable hyaluronic acid‐based surgical glue with tunable mechanical properties and high adhesive strength

Hyaluronic acid (HA), a naturally occurring linear polysaccharide, has been widely used as a key biomaterial in a range of cosmetic and therapeutic applications. Its excellent biocompatibility and bio‐functions related to tissue regeneration encourage the development of HA‐based hydrogels to expand its applications. This study details an in situ forming surgical glue based on photocrosslinkable HA, providing tunable mechanical properties and firm tissue adhesion under wet and dynamic conditions. Depending on the degree of photocrosslinkable methacrylate groups in HA polymer chains, the mechanical properties of hyaluronate methacrylate (HAMA) hydrogels prepared by UV photocrosslinking was improved. Ex vivo adhesion tests revealed that HAMA hydrogels exhibited 3‐fold higher shear adhesive strength compared to gelatin methacryloyl hydrogels and achieved firm adherence to the porcine skin tissue for several weeks. The high adhesive strength of HAMA hydrogels, under dry and wet conditions, suggests that it may have great promise as a tissue adhesive. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 522–530     

POLY(ASPARTIC ACID) HYDROGEL

ABSTRACT

Stimuli-responsive hydrogels have attracted much interest recently [1]. In this paper, we report a pH- and electrolyte-responsive hydrogel based on a crosslinked poly(aspartic acid). The lightly crosslinked, high molecular weight sodium polyas-partate impart extremely high water absorbency and can be used as a superabsorbent [2], It is derived from a naturally occurring non-toxic amino acid, L-aspartic acid. A hydrogel based on poly(as-partic acid) possesses most of the features of poly(acrylic acid) hydrogels plus improved biodegradability. We expect it to be useful in a variety of applications including personal care and biomedical areas.     

A Double Network Hydrogel with High Mechanical Strength and Shape Memory Properties

Double network (DN) hydrogels as one kind of tough gels have attracted extensive attention for their potential applications in biomedical and load-bearing fields. Herein, we import more functions like shape memory into the conventional tough DN hydrogel system. We synthesize the PEG-PDAC/P(AAm-co-AAc) DN hydrogels, of which the first network is a well-defined PEG (polyethylene glycol) network loaded with PDAC (poly(acryloyloxyethyltrimethyl ammonium chloride)) strands, while the second network is formed by copolymerizing AAm (acrylamide) with AAc (acrylic acid) and cross-linker MBAA (N, N'-methylenebisacrylamide). The PEG-PDAC/P(AAm-co-AAc) DN gels exhibits high mechanical strength. The fracture stress and toughness of the DN gels reach up to 0.9 MPa and 3.8 MJ/m³, respectively. Compared with the conventional double network hydrogels with neutral polymers as the soft and ductile second network, the PEG-PDAC/P(AAm-coAAc) DN hydrogels use P(AAm-co-AAc), a weak polyelectrolyte, as the second network. The AAc units serve as the coordination points with Fe³⁺ ions and physically crosslink the second network, which realizes the shape memory property activated by the reducing ability of ascorbic acid. Our results indicate that the high mechanical strength and shape memory properties, probably the two most important characters related to the potential application of the hydrogels, can be introduced simultaneously into the DN hydrogels if the functional monomer has been integrated into the network of DN hydrogels smartly.     

Synthesis and characterization of poly(N‐vinyl formamide) hydrogels—A potential alternative to polyacrylamide hydrogels

The synthesis and characterization of solution‐cast, molded gels of N‐vinyl formamide (NVF) has not been previously reported even though NVF is an isomer of acrylamide (AAm) and polyacrylamide (PAAm) hydrogels have many commercial applications. Aqueous NVF solutions were cross‐linked into gels using a novel cross‐linker, 2‐(N‐vinylformamido)ethylether, and the thermally‐activated initiator VA‐044. For a given formulation, PNVF gels swell up to twice that of PAAm gels cross‐linked with N,N′‐methylenebisacrylamide. From swelling and compression measurements, PNVF gels were found to be more hydrophilic than PAAm gels. Flory‐Huggins solubility parameters were χ = 0.38?₂ + 0.48 for PNVF and χ = 0.31?₂ + 0.49 for PAAm, where ?₂ is the polymer volume fraction. The shear moduli for PNVF and PAAm scale with ? and ? respectively, consistent with good solvent behavior, also suggesting PNVF is more hydrophilic than PAAm. Similarity of mechanical properties for both gels as a function of ?₂ suggests that network structures of PNVF and PAAm gels are similar. Fracture strains of both gels declined with ?₂ by the same linear function while fracture stresses were about 500 kPa regardless of formulation. Since NVF is a liquid monomer, less toxic than AAm and can be hydrolyzed to a cationic form, PNVF gels could become technologically significant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Novel Protein Binding Capacity and Selectivity of Immobilized Pyridinium Pseudo-Affinity Gels: Applications in Immunoglobulin G Purification and Quantitative Determination

Abstract

A series of novel pseudo-affinity gels using synthetic, immobilized pyridinium ligands have been prepared. These gels exhibit extraordinarily high protein binding capacity and selectivity. Initial applications of these gels were directed toward the purification and quantitative, rapid determination of immunoglobulins. The results showed that these pseudo-affinity gels functionally mimic, to a high degree of similarity, the behavior of immobilized Protein A or G for immunoglobulins purification. In contrast to the labile nature of protein-based affinity gels, these immobilized pyridinium gels can withstand harsher treatments, such as prolonged exposure of the gels to proteolytic enzymes, organic solvents, acid or base and high temperatures.     

Porous Colloidal Hydrogels Formed by Coordination-Driven Self-Assembly of Charged Metal-Organic Polyhedra

Introduction of porosity into supramolecular gels endows soft materials with functionalities for molecular encapsulation, release, separation and conversion. Metal-organic polyhedra (MOPs), discrete coordination cages containing an internal cavity, have recently been employed as building blocks to construct polymeric gel networks with potential porosity. However, most of the materials can only be synthesized in organic solvents, and the examples of porous, MOP-based hydrogels are scarce. Here, we demonstrate the fabrication of porous hydrogels based on [Rh₂(OH-bdc)₂]₁₂, a rhodium-based MOP containing hydroxyl groups on its periphery (OH-bdc=5-hydroxy-1,3-benzenedicarboxylate). By simply deprotonating [Rh₂(OH-bdc)₂]₁₂ with the base NaOH, the supramolecular polymerization between MOPs and organic linkers can be induced in the aqueous solution, leading to the kinetically controllable formation of hydrogels with hierarchical colloidal networks. When heating the deprotonated MOP, Na_x[Rh₂₄(O-bdc)_x(OH-bdc)_24-x], to induce gelation, the MOP was found to partially decompose, affecting the mechanical property of the resulting gels. By applying a post-synthetic deprotonation strategy, we show that the deprotonation degree of the MOP can be altered after the gel formation without serious decomposition of the MOPs. Gas sorption measurements confirmed the permanent porosity of the corresponding aerogels obtained from these MOP-based hydrogels, showing potentials for applications in gas sorption and catalysis.     

Synthesis and characterization of stimuli‐sensitive micro‐ and nanohydrogels based on photocrosslinkable poly(dimethylaminoethyl methacrylate)

The aim of this work was the development of a versatile route for the preparation of temperature‐ and pH‐responsive hydrogels with small dimensions. The copolymerization of N,N‐dimethylaminoethyl methacrylate with various amounts (5 and 10 mol %) of dimethylmaleimidoethyl methacrylate in solution with 2,2′‐azobisisobutyronitrile as an initiator is described. The structural and molecular characterization of the copolymers was performed with proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet spectroscopy, as well as size exclusion chromatography. Differential scanning calorimetry and thermogravimetry were used for the thermal characterization of the copolymers. Micro‐ and nanohydrogels of the copolymers were prepared by photocrosslinking. The gels obtained by photocrosslinking were characterized with a combination of surface plasmon resonance and optical waveguide spectroscopy, dynamic light scattering, and scanning electron microscopy. The hydrogels showed temperature‐ and pH‐responsive behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 669–679, 2007     

Fabrication,chemical modification,and topographical patterning of reactive gels assembled from azlactone‐functionalized polymers and a diamine

The work reported here demonstrates an approach to the fabrication of chemically reactive and topographically patterned hydrogels using the azlactone‐functionalized polymer poly(2‐vinyl‐4,4'‐dimethylazlactone) (PVDMA) and the hydrophilic diamine Jeffamine®. Gels were initially assembled in DMSO but can be subsequently transferred into aqueous media to form hydrogels. Spectroscopic characterization of assembled gels demonstrated that variation in the stoichiometric ratio of azlactones to amines during gel synthesis permits control over the extent of crosslinking in the gels. Residual azlactones not consumed during crosslinking can be exploited to further functionalize these gels with hydrophobic, hydrophilic, and macromolecular amines that influence the physicochemical properties of these materials in aqueous solvents. The surface and bulk of these gels can be differentially functionalized (i.e., different functional groups on the gel surface relative to the bulk) by taking advantage of different rates of diffusion of macromolecular amines versus small molecule amines into assembled gels. Finally, these azlactone‐functionalized gels can be topographically patterned with microwell arrays using a replica molding technique and chemically modified postfabrication with amine nucleophiles. This reactive approach to the fabrication of topographically patterned and chemically functionalized hydrogels offers a straightforward method for the rapid synthesis of micropatterned scaffolds of interest in a broad range of applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3185–3194     

Polymeric networks by the cationic crosslinking reaction of poly(allenyl ether)s having oligo(oxyethylene) moieties in the side chain

Cationic crosslinking reactions of poly(allenyl ether)s having oligo(oxyethylene) moieties prepared by the radical polymerization of the corresponding allenyl ethers were carried out under some varied reaction conditions. For instance, a crosslinked polymer was obtained in 82% yield by the treatment of poly(ethylene glycol methyl allenyl ether) ( 1a ) with 1.2 mol% of BF₃·OEt₂ ( 2 ) under high concentration in dichloromethane (46 wt %). The gels obtained showed good swelling properties in water, alcohols, and polar organic solvents such as dichloromethane. In particular, the degrees of swelling of these gels in aqueous sodium chloride (1M) were quite similar to those in ion-free water, indicating that these gels served as nonionic hydrogels. © 1994 John Wiley & Sons, Inc.     

The preparation and properties of hybridized hydrogels based on cubic thiol-functionalized silsesquioxane covalently linked with poly(N-isopropylacrylamide)

Firstly, nano-sized polyhedral oligomeric silsesquioxane with functional mercapto groups (POSS-SH) was prepared through hydrolytic condensation of 3-mercaptopropyl trimethoxysilane. Then N-isopropylacrylamide (NIPAm) was allowed to polymerize at the presence of POSS-SH and N,N-methylene-bisacrylamide to yield hybridized hydrogels. The hybridized hydrogels demonstrated thermosensitive behavior across the volume phase transition temperatures. The swelling and deswelling rates were greatly accelerated through the incorporating of POSS-SH into the gels, and the thermal properties of the hybridized hydrogels were reinforced compared with the neat PNIPAm hydrogel. These results were ascribed to nano-effect created by the hydrophobic POSS-SH nanoparticles. The hybridized hydrogels have potential applications in drug controlled release.     

纳米复合水凝胶的力学行为与刺激响应性

纳米复合水凝胶（nanocomposite hydrogels,NC凝胶）由于其简便的制备方法、独特的组成、优异的力学性能、高光学透明度以及良好的溶胀/去溶胀性等,引起了广泛的关注.近年来,本课题组在NC凝胶的力学行为及刺激响应性NC凝胶的制备方面取得了可喜的研究成果.观察到新合成的和溶胀平衡的聚N-异丙基丙烯酰胺（PNIPAm）-锂藻土LaponiteNC凝胶的超拉伸性,发现了在大应变下的应变硬化现象;发现利用Mooney-Rivlin方程可以描述NC凝胶的压缩应力-应变,但不能描述较大的应变硬化;Creton模型能很好地描述NC凝胶在大形变下的应力-应变曲线,特别是凝胶的应变硬化;从NC凝胶小应变下的平衡剪切模量得到了有效交联密度,观察到NC凝胶形变-回复过程的迟滞现象,测定了NC凝胶的松弛指数.我们认为NC凝胶具有超拉伸性的原因是其较低的交联密度和适度的松弛速率;在响应性NC凝胶的制备方面,发现了溶胶型Laponite的水分散液的稳定窗口,避免了加入离子性单体引起的聚集沉淀;通过共聚制备了具有超拉伸性、pH响应或温度和pH双响应的透明NC凝胶.本文主要综述了我们课题组在NC凝胶力学行为及响应性NC凝胶领域的一些研究进展,并分析了NC凝胶研究领域仍然未解决的科学问题,以及今后可能的发展方向.     

Facile Tailoring of Structures for Controlled Release of Paracetamol from Sustainable Lignin Derived Platforms

Nowadays, sustainable materials are receiving significant attention due to the fact that they will be crucial for the development of the next generation of products and devices. In the present work, hydrogels have been successfully synthesized using lignin which is non-valorized biopolymer from the paper industry. Hydrogels were prepared via crosslinking with Poly(ethylene) glycol diglycidyl ether (PEGDGE). Different crosslinker ratios were used to determine their influence on the structural and chemical properties of the resulting hydrogels. It has been found that pore size was reduced by increasing crosslinker amount. The greater crosslinking density increased the swelling capacity of the hydrogels due to the presence of more hydrophilic groups in the hydrogel network. Paracetamol release test showed higher drug diffusion for hydrogels produced with a ratio lignin:PEGDGE 1:1. The obtained results demonstrate that the proposed approach is a promising route to utilize lignocellulose waste for producing porous materials for advanced biomedical applications in the pharmacy industry.     

Characterization and Optimization of Injectable In Situ Crosslinked Chitosan-Genipin Hydrogels

In recent years, there has been an increased interest in injectable, in situ crosslinking hydrogels due to their minimally invasive application and ability to conform to their environment. Current in situ crosslinking chitosan hydrogels are either mechanically robust with poor biocompatibility and limited biodegradation due to toxic crosslinking agents or the hydrogels are mechanically weak and undergo biodegradation too rapidly due to insufficient crosslinking. Herein, the authors developed and characterized a thermally-driven, injectable chitosan-genipin hydrogel capable of in situ crosslinking at 37 °C that is mechanically robust, biodegradable, and maintain high biocompatibility. The natural crosslinker genipin is utilized as a thermally-driven, non-toxic crosslinking agent. The chitosan-genipin hydrogel's crosslinking kinetics, injectability, viscoelasticity, swelling and pH response, and biocompatibility against human keratinocyte cells are characterized. The developed chitosan-genipin hydrogels are successfully crosslinked at 37 °C, demonstrating temperature sensitivity. The hydrogels maintained a high percentage of swelling over several weeks before degrading in biologically relevant environments, demonstrating mechanical stability while remaining biodegradable. Long-term cell viability studies demonstrated that chitosan-genipin hydrogels have excellent biocompatibility over 7 days, including during the hydrogel crosslinking phase. Overall, these findings support the development of an injectable, in situ crosslinking chitosan-genipin hydrogel for minimally invasive biomedical applications.     

Synthesis,self-assembly,and photomechanical actuator performance of a sequence-defined polyviologen crosslinker

ABSTRACT

Although it is well known that viologen radical cations can self-assemble into stacks or complexes on account of radical-radical pairing interactions, it has only recently been demonstrated that reduction of main-chain polyviologens integrated into hydrogel networks can trigger actuation. In these earlier examples, hydrogels comprising oligoethylene glycol-based polyviologens and poly(ethylene glycol) were functionalized with terminal azide groups to prepare ‘click’-based gels. Here, we report a new structural design for the functional polyviologen that consists of main-chain viologen subunits separated by hexamethylene groups instead of glycols and is capped at each end with styrene groups. Activation of this viologen-based macrocrosslinker was achieved using chemical- and photoreduction methods and its ability to undergo intramolecular chain-folding was monitored by absorption spectroscopy. Acrylate-based organogels and hydrogels were also prepared and a comparison was carried out to assess the actuator performance in each gel in terms of the rate of contraction and changes in stiffness.